Inkjet printing of mammalian cells – Theory and applications

Thermal Bioprinting Causes Ample Alterations of Expression of LUCAT1, IL6, CCL26, and NRN1L Genes and Massive Phosphorylation of Critical Oncogenic Drug Resistance Pathways in Breast Cancer Cells

(2020) Aleli Campbell et al.   Frontiers in Bioengineering and Biotechnology

Use of inkjet-printed single cells to quantify intratumoral heterogeneity

(2020) Woong Hee Yoon et al.   Biofabrication

Evaluation of the effects of cell-dispensing using an inkjet-based bioprinter on cell integrity by RNA-seq analysis

(2020) Masayuki Yumoto et al.   Scientific Reports

In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds

(2019) Mohammed Albanna et al.   Scientific Reports

2D and 3D thermally bioprinted human MCF-7 breast cancer cells: A promising model for drug discovery.

(2019) Aleli Campbell et al.   JOURNAL OF CLINICAL ONCOLOGY

Recent advances in 3D printing: vascular network for tissue and organ regeneration

(2019) Sung Yun Hann et al.   Translational Research

Inkjet-printed stretchable and low voltage synaptic transistor array

(2019) F. Molina-Lopez et al.   Nature Communications

All Inkjet-Printed Graphene-Silver Composite Ink on Textiles for Highly Conductive Wearable Electronics Applications

(2019) Nazmul Karim et al.   Scientific Reports

A Novel Controllable Cell Array Printing Technique on Microfluidic Chips

(2019) Shengli Mi et al.   IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING

Construction of 3D in vitro models by bioprinting human pluripotent stem cells: Challenges and opportunities

(2019) Federico Salaris et al.   BRAIN RESEARCH

Layer-By-Layer: The Case for 3D Bioprinting Neurons to Create Patient-Specific Epilepsy Models

(2019) Natasha Antill-O’Brien et al.   Materials

Opportunities and challenges of translational 3D bioprinting

(2019) Sean V. Murphy et al.   Nature Biomedical Engineering

Acoustic Poration and Dynamic Healing of Mammalian Cell Membranes during Inkjet Printing

(2019) Srimanta Barui et al.   ACS Biomaterials-Science & Engineering

Biofabrication: A Guide to Technology and Terminology

(2018) Lorenzo Moroni et al.   TRENDS IN BIOTECHNOLOGY

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures

(2018) Andrea Negro et al.   Scientific Reports

A brief account of viral vectors and their promise for gene therapy

(2017) M Finer et al.   GENE THERAPY

Fabrication of In Vitro Cancer Microtissue Array on Fibroblast-Layered Nanofibrous Membrane by Inkjet Printing

(2017) Tae-Min Park et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Cell Microarray Technologies for High-Throughput Cell-Based Biosensors

(2017) Hye Hong et al.   SENSORS

Methods of Micropatterning and Manipulation of Cells for Biomedical Applications

(2017) Adrian Martinez-Rivas et al.   Micromachines

Immunological challenges associated with artificial skin grafts: available solutions and stem cells in future design of synthetic skin

(2017) Saurabh Dixit et al.   Journal of Biological Engineering

Inkjet Printing of High Performance Transistors with Micron Order Chemically Set Gaps

(2017) Peter Mack Grubb et al.   Scientific Reports

Freeform micropatterning of living cells into cell culture medium using direct inkjet printing

(2017) Ju An Park et al.   Scientific Reports

3D bioprinting for engineering complex tissues

(2016) Christian Mandrycky et al.   BIOTECHNOLOGY ADVANCES

Dishing out mini-brains: Current progress and future prospects in brain organoid research

(2016) Iva Kelava et al.   DEVELOPMENTAL BIOLOGY

3D printing in pharmaceutics: A new tool for designing customized drug delivery systems

(2016) Jonathan Goole et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Development of living cell microarrays using non-contact micropipette printing

(2016) Rebecca Jonczyk et al.   JOURNAL OF BIOTECHNOLOGY

Multiplex cell microarrays for high-throughput screening

(2016) Ophélie I. Berthuy et al.   LAB ON A CHIP

Inkjet Printing of Functional Materials for Optical and Photonic Applications

(2016) Jorge Alamán et al.   Materials

The intracellular trafficking mechanism of Lipofectamine-based transfection reagents and its implication for gene delivery

(2016) Francesco Cardarelli et al.   Scientific Reports

Single-cell PCR of genomic DNA enabled by automated single-cell printing for cell isolation

(2015) F. Stumpf et al.   BIOSENSORS & BIOELECTRONICS

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

3D Printing technologies for drug delivery: a review

(2015) Leena Kumari Prasad et al.   DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY

Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing

(2015) Jia Li et al.   LAB ON A CHIP

Geometrical and Mechanical Properties Control Actin Filament Organization

(2015) Gaëlle Letort et al.   PLoS Computational Biology

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

A critical review of the pseudopotential multiphase lattice Boltzmann model: Methods and applications

(2014) Li Chen et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Inkjet printing biomaterials for tissue engineering: bioprinting

(2014) Rachel Elizabeth Saunders et al.   INTERNATIONAL MATERIALS REVIEWS

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

The HSP70 family and cancer

(2013) M. E. Murphy   CARCINOGENESIS

Correction: Mild Oxidative Stress Induces Redistribution of BACE1 in Non-Apoptotic Conditions and Promotes the Amyloidogenic Processing of Alzheimer’s Disease Amyloid Precursor Protein

(2013) Jiang-Li Tan et al.   PLoS One

Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology

(2012) Tao Xu et al.   BIOMATERIALS

Margination of White Blood Cells in Microcapillary Flow

(2012) Dmitry A. Fedosov et al.   PHYSICAL REVIEW LETTERS

Three-Dimensional Human Tissue Chips Fabricated by Rapid and Automatic Inkjet Cell Printing

(2012) Michiya Matsusaki et al.   Advanced Healthcare Materials

Molecular dynamics simulations of pore formation dynamics during the rupture process of a phospholipid bilayer caused by high-speed equibiaxial stretching

(2011) Kenichiro Koshiyama et al.   JOURNAL OF BIOMECHANICS

Inkjet-like printing of single-cells

(2011) Azmi Yusof et al.   LAB ON A CHIP

Contact printing of arrayed microstructures

(2010) Wei Xu et al.   ANALYTICAL AND BIOANALYTICAL CHEMISTRY

Proposed Spring Network Cell Model Based on a Minimum Energy Concept

(2010) Yoshihiro Ujihara et al.   ANNALS OF BIOMEDICAL ENGINEERING

Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

(2010) Brian Derby   Annual Review of Materials Research

A Multiscale Red Blood Cell Model with Accurate Mechanics, Rheology, and Dynamics

(2010) Dmitry A. Fedosov et al.   BIOPHYSICAL JOURNAL

Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells

(2010) Xiaofeng Cui et al.   BIOTECHNOLOGY AND BIOENGINEERING

“One Cell−One Well”: A New Approach to Inkjet Printing Single Cell Microarrays

(2010) Albert R. Liberski et al.   ACS Combinatorial Science

Living-Cell Microarrays

(2009) Martin L. Yarmush et al.   Annual Review of Biomedical Engineering

Human microvasculature fabrication using thermal inkjet printing technology

(2009) Xiaofeng Cui et al.   BIOMATERIALS

Targeting HSP90 for cancer therapy

(2009) D Mahalingam et al.   BRITISH JOURNAL OF CANCER

Simple and rapid process for single cell micro-patterning

(2009) Ammar Azioune et al.   LAB ON A CHIP

Inkjet-Mediated Gene Transfection into Living Cells Combined with Targeted Delivery

(2008) Tao Xu et al.   TISSUE ENGINEERING PART A

Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

(2007) Rachel E. Saunders et al.   BIOMATERIALS