Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends

3D-Bioprinting Strategies Based on In Situ Bone-Healing Mechanism for Vascularized Bone Tissue Engineering

(2021) Ye Lin Park et al.   Micromachines

3D Printed Hydrogels with Aligned Microchannels to Guide Neural Stem Cell Migration

(2021) Cui Li et al.   ACS Biomaterials-Science & Engineering

Nerve guide conduits for peripheral nerve injury repair: A review on design, materials and fabrication methods

(2020) Sanjairaj Vijayavenkataraman   Acta Biomaterialia

Nanoscale 3D Bioprinting for Osseous Tissue Manufacturing

(2020) Yujia Wang et al.   International Journal of Nanomedicine

Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting

(2020) Yang Wu et al.   TRENDS IN BIOTECHNOLOGY

Automated Addressable Microfluidic Device for Minimally Disruptive Manipulation of Cells and Fluids within Living Cultures

(2020) Anh Tong et al.   ACS Biomaterials-Science & Engineering

3D Bioprinted Vascularized Tumour for Drug Testing

(2020) Seokgyu Han et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

3D bioprinting applications in neural tissue engineering for spinal cord injury repair

(2020) Tuba Bedir et al.   Materials Science & Engineering C-Materials for Biological Applications

3D Bioprinting for Vascularized Tissue-Engineered Bone Fabrication

(2020) Fei Xing et al.   Materials

Advances in the Research of Bioinks Based on Natural Collagen, Polysaccharide and Their Derivatives for Skin 3D Bioprinting

(2020) Jie Xu et al.   Polymers

Polysaccharide-Based Bioink Formulation for 3D Bioprinting of an In Vitro Model of the Human Dermis

(2020) Tanja Zidarič et al.   Nanomaterials

Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: An in vivo study

(2020) Kaiwei Ma et al.   Journal of Advanced Research

Human Oral Motion‐Powered Smart Dental Implant (SDI) for In Situ Ambulatory Photo‐biomodulation Therapy

(2020) Moonchul Park et al.   Advanced Healthcare Materials

3D Printing and Bioprinting Nerve Conduits for Neural Tissue Engineering

(2020) Xiaoling Yu et al.   Polymers

pH-dependent nanodiamonds enhance the mechanical properties of 3D-printed hyaluronic acid nanocomposite hydrogels

(2020) Dae Gon Lim et al.   JOURNAL OF NANOBIOTECHNOLOGY

Lithography-based 3D Bioprinting and Bioinks for Bone Repair and Regeneration

(2020) Renjie Liang et al.   ACS Biomaterials-Science & Engineering

Noninvasive in vivo 3D bioprinting

(2020) Yuwen Chen et al.   Science Advances

Orodispersible Polymer Films with the Poorly Water-Soluble Drug, Olanzapine: Hot-Melt Pneumatic Extrusion for Single-Process 3D Printing

(2020) Hui-Won Cho et al.   Pharmaceutics

Hot-Melt 3D Extrusion for the Fabrication of Customizable Modified-Release Solid Dosage Forms

(2020) Jaemin Lee et al.   Pharmaceutics

Advancing bioinks for 3D bioprinting using reactive fillers: A review

(2020) Susanne Heid et al.   Acta Biomaterialia

Hydrogel‐Based 3D Bioprinting for Bone and Cartilage Tissue Engineering

(2020) Parinaz Abdollahiyan et al.   Biotechnology Journal

Printability and Shape Fidelity of Bioinks in 3D Bioprinting

(2020) Andrea Schwab et al.   CHEMICAL REVIEWS

Evaluation of silk‐based bioink during pre and post 3D bioprinting: A review

(2020) Sharda Gupta et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Fabrication of strontium-substituted hydroxyapatite scaffolds using 3D printing for enhanced bone regeneration

(2020) Hyun-Woo Kim et al.   Journal of Materials Science

Photocross-linkable Methacrylated Polypeptides and Polysaccharides for Casting, Injecting, and 3D Fabrication

(2020) Hatai Jongprasitkul et al.   BIOMACROMOLECULES

Biofabrication of 3D printed hydroxyapatite composite scaffolds for bone regeneration

(2020) Yoontae Kim et al.   Biomedical Materials

Boosting up printability of biomacromolecule based bio-ink by modulation of hydrogen bonding pairs

(2020) Busra Koksal et al.   EUROPEAN POLYMER JOURNAL

Creation of bladder assembloids mimicking tissue regeneration and cancer

(2020) Eunjee Kim et al.   NATURE

Advancing Frontiers in Bone Bioprinting

(2019) Nureddin Ashammakhi et al.   Advanced Healthcare Materials

Fabrication of Scaffolds for Bone-Tissue Regeneration

(2019) Petra Chocholata et al.   Materials

Volumetric additive manufacturing via tomographic reconstruction

(2019) Brett E. Kelly et al.   SCIENCE

Forget everything you know about 3D printing — the ‘replicator’ is here

(2019) Davide Castelvecchi   NATURE

Three-dimensional Bioprinting of Cell-laden Constructs Using Polysaccharide-based Self-healing Hydrogels

(2019) Sang Woo Kim et al.   BIOMACROMOLECULES

In situ three-dimensional printing for reparative and regenerative therapy

(2019) Nureddin Ashammakhi et al.   BIOMEDICAL MICRODEVICES

Multivascular networks and functional intravascular topologies within biocompatible hydrogels

(2019) Bagrat Grigoryan et al.   SCIENCE

3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts

(2019) Nadav Noor et al.   Advanced Science

The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine

(2019) G. Cidonio et al.   BIOMATERIALS

3D printing of step-gradient nanocomposite hydrogels for controlled cell migration

(2019) Andisheh Motealleh et al.   Biofabrication

The revolution will be open-source: how 3D bioprinting can change 3D cell culture

(2019) Robert D. Bruno et al.   Oncotarget

Ultra-Low-Cost 3D Bioprinting: Modification and Application of an Off-the-Shelf Desktop 3D-Printer for Biofabrication

(2019) Melanie Kahl et al.   Frontiers in Bioengineering and Biotechnology

In situ bioprinting – Bioprinting from benchside to bedside?

(2019) Satnam Singh et al.   Acta Biomaterialia

3D bioprinting models of neural tissues: The current state of the field and future directions

(2019) Laura de la Vega et al.   BRAIN RESEARCH BULLETIN

Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review

(2019) Kevin Dzobo et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

3D Bioprinting: The Emergence of Programmable Biodesign

(2019) Sara Correia Carreira et al.   Advanced Healthcare Materials

An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues

(2019) Soumitra Das et al.   JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE

Evaluation of Sericin Containing Gel as a Photoinitiator-Free Printable Biomaterial

(2019) Mijin Jang et al.   3D Printing and Additive Manufacturing

Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives

(2019) Janitha M. Unagolla et al.   Applied Materials Today

Four-dimensional bioprinting: Current developments and applications in bone tissue engineering

(2019) Zhuqing Wan et al.   Acta Biomaterialia

A review of 3D bio-printing for bone and skin tissue engineering: a commercial approach

(2019) Nima Beheshtizadeh et al.   JOURNAL OF MATERIALS SCIENCE

Development of 3D Bioprinting: From Printing Methods to Biomedical Applications

(2019) Zeming Gu et al.   Asian Journal of Pharmaceutical Sciences

Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting

(2018) Amir K. Miri et al.   ADVANCED MATERIALS

3D neural tissue models: From spheroids to bioprinting

(2018) Pei Zhuang et al.   BIOMATERIALS

3D printed UV light cured polydimethylsiloxane devices for drug delivery

(2018) Jenny Holländer et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Progress in scaffold-free bioprinting for cardiovascular medicine

(2018) Nicanor I. Moldovan   JOURNAL OF CELLULAR AND MOLECULAR MEDICINE

3D bioprinter applied picosecond pulsed electric fields for targeted manipulation of proliferation and lineage specific gene expression in neural stem cells

(2018) Ross A Petrella et al.   Journal of Neural Engineering

Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting

(2018) Nicholas Law et al.   Journal of the Mechanical Behavior of Biomedical Materials

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting

(2018) Michael Di Giuseppe et al.   Journal of the Mechanical Behavior of Biomedical Materials

3D printing for cardiovascular tissue engineering: a review

(2018) Abhishek Roy et al.   MATERIALS TECHNOLOGY

Synthesis of Biomaterials Utilizing Microfluidic Technology

(2018) Xiaohong Wang et al.   Genes

Photoactivated Polymeric Bilayer Actuators Fabricated via 3D Printing

(2018) Daniel E. Hagaman et al.   ACS Applied Materials & Interfaces

Microfluidic Flow Cell Array for Controlled Cell Deposition in Engineered Musculoskeletal Tissues

(2018) David Ede et al.   TISSUE ENGINEERING PART C-METHODS

Beyond 2D: 3D bioprinting for skin regeneration

(2018) Rui Wang et al.   International Wound Journal

Hydrogels with an embossed surface: An all-in-one platform for mass production and culture of human adipose-derived stem cell spheroids

(2018) Se-jeong Kim et al.   BIOMATERIALS

Cardiovascular tissue bioprinting: Physical and chemical processes

(2018) James B. Hu et al.   Applied Physics Reviews

In vitro evaluation of 3D bioprinted tri-polymer network scaffolds for bone tissue regeneration

(2017) Stephanie T. Bendtsen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

3D bioprinting and its in vivo applications

(2017) Nhayoung Hong et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Organ-on-a-chip devices advance to market

(2017) Boyang Zhang et al.   LAB ON A CHIP

3D cell bioprinting of self-assembling peptide-based hydrogels

(2017) Bella Raphael et al.   MATERIALS LETTERS

Progress in three-dimensional bioprinting

(2017) Adam W. Feinberg et al.   MRS BULLETIN

Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators

(2017) David McCoul et al.   Smart Materials and Structures

Controlling Adult Stem Cell Behavior Using Nanodiamond-Reinforced Hydrogel: Implication in Bone Regeneration Therapy

(2017) Settimio Pacelli et al.   Scientific Reports

3D Bioprinting for Cartilage and Osteochondral Tissue Engineering

(2017) Andrew C. Daly et al.   Advanced Healthcare Materials

Concise Review: Bioprinting of Stem Cells for Transplantable Tissue Fabrication

(2017) Ashley N. Leberfinger et al.   Stem Cells Translational Medicine

3D Bioprinting: New Directions in Articular Cartilage Tissue Engineering

(2017) Grace O’Connell et al.   ACS Biomaterials-Science & Engineering

3D Bioprinting: New Directions in Articular Cartilage Tissue Engineering

(2017) Grace O’Connell et al.   ACS Biomaterials Science & Engineering

One-step volumetric additive manufacturing of complex polymer structures

(2017) Maxim Shusteff et al.   Science Advances

Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink

(2017) Duong Nguyen et al.   Scientific Reports

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

(2017) Virginie Keriquel et al.   Scientific Reports

High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing

(2017) Alexander D. Graham et al.   Scientific Reports

Freeform micropatterning of living cells into cell culture medium using direct inkjet printing

(2017) Ju An Park et al.   Scientific Reports

Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications

(2016) Michael Müller et al.   ANNALS OF BIOMEDICAL ENGINEERING

State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering

(2016) Bin Duan   ANNALS OF BIOMEDICAL ENGINEERING

Bio-functionalized silk hydrogel microfluidic systems

(2016) Siwei Zhao et al.   BIOMATERIALS

Current advances and future perspectives in extrusion-based bioprinting

(2016) Ibrahim T. Ozbolat et al.   BIOMATERIALS

Drop-on-demand inkjet-based cell printing with 30-μm nozzle diameter for cell-level accuracy

(2016) Young Kwon Kim et al.   Biomicrofluidics

Application areas of 3D bioprinting

(2016) Ibrahim T. Ozbolat et al.   DRUG DISCOVERY TODAY

Biocompatible silk fibroin scaffold prepared by reactive inkjet printing

(2016) Patrick Rider et al.   JOURNAL OF MATERIALS SCIENCE

Design, microfabrication, and characterization of a moulded PDMS/SU-8 inkjet dispenser for a Lab-on-a-Printer platform technology with disposable microfluidic chip

(2016) Anas Bsoul et al.   LAB ON A CHIP

Bioprinted thrombosis-on-a-chip

(2016) Yu Shrike Zhang et al.   LAB ON A CHIP

Applications of 3D printing in cardiovascular diseases

(2016) Andreas A. Giannopoulos et al.   Nature Reviews Cardiology

Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting

(2016) Xuanyi Ma et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Dual-Stage Crosslinking of a Gel-Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting

(2016) Karen Dubbin et al.   Advanced Healthcare Materials

Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting

(2016) Rod R. Jose et al.   ACS Biomaterials-Science & Engineering

Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting

(2016) Rod R. Jose et al.   ACS Biomaterials Science & Engineering

Layer-by-Layer 3D Constructs of Fibroblasts in Hydrogel for Examining Transdermal Penetration Capability of Nanoparticles

(2016) Xiaochun Hou et al.   SLAS Technology

Development of Large-Scale Size-Controlled Adult Pancreatic Progenitor Cell Clusters by an Inkjet-Printing Technique

(2015) Jia Yang et al.   ACS Applied Materials & Interfaces

3D-printed hierarchical scaffold for localized isoniazid/rifampin drug delivery and osteoarticular tuberculosis therapy

(2015) Min Zhu et al.   Acta Biomaterialia

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

(2015) James O. Hardin et al.   ADVANCED MATERIALS

4D Printing with Mechanically Robust, Thermally Actuating Hydrogels

(2015) Shannon E. Bakarich et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Printed Dual Cell Arrays for Multiplexed Sensing

(2015) Irina Drachuk et al.   ACS Biomaterials-Science & Engineering

Printed Dual Cell Arrays for Multiplexed Sensing

(2015) Irina Drachuk et al.   ACS Biomaterials Science & Engineering

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

(2015) T. J. Hinton et al.   Science Advances

3D Micro-Extrusion of Graphene-based Active Electrodes: Towards High-Rate AC Line Filtering Performance Electrochemical Capacitors

(2014) Teressa Nathan-Walleser et al.   ADVANCED FUNCTIONAL MATERIALS

Inkjet Printing of Silk Nest Arrays for Cell Hosting

(2014) Rattanon Suntivich et al.   BIOMACROMOLECULES

Bioprinting Technology: A Current State-of-the-Art Review

(2014) Amer B. Dababneh et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

The preliminary performance study of the 3D printing of a tricalcium phosphate scaffold for the loading of sustained release anti-tuberculosis drugs

(2014) Jing Yuan et al.   JOURNAL OF MATERIALS SCIENCE

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia

(2014) Jianhua Zhang et al.   Journal of Materials Chemistry B

In vivo acute and humoral response to three-dimensional porous soy protein scaffolds

(2013) Karen B. Chien et al.   Acta Biomaterialia

The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability

(2013) Thomas Billiet et al.   BIOMATERIALS

Paper-Based Flexible Taxel Device Using Electrical Contact Resistance Variation for Elasticity Measurement on Biological Objects

(2013) Chao-Cheng Shiau et al.   IEEE SENSORS JOURNAL

Poly(ester-urethane) scaffolds: effect of structure on properties and osteogenic activity of stem cells

(2013) Aysel Kiziltay et al.   Journal of Tissue Engineering and Regenerative Medicine

Improvements in carbon fibre reinforced composites by inkjet printing of thermoplastic polymer patterns

(2013) Yi Zhang et al.   Physica Status Solidi-Rapid Research Letters

Structural reinforcement of cell-laden hydrogels with microfabricated three dimensional scaffolds

(2013) Chaenyung Cha et al.   Biomaterials Science

Rigidity Guided Cell Attachment on Inkjet-Printed Patterns

(2012) Ying-Chih Liao et al.   ACS Applied Materials & Interfaces

In situ forming collagen–hyaluronic acid membrane structures: Mechanism of self-assembly and applications in regenerative medicine

(2012) Eun Ji Chung et al.   Acta Biomaterialia

A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering

(2012) Thomas Billiet et al.   BIOMATERIALS

The impact of fabrication parameters and substrate stiffness in direct writing of living constructs

(2012) Annalisa Tirella et al.   BIOTECHNOLOGY PROGRESS

Anin vivostudy on the effect of scaffold geometry and growth factor release on the healing of bone defects

(2012) P. Yilgor et al.   Journal of Tissue Engineering and Regenerative Medicine

A multifunctional pipette

(2012) Alar Ainla et al.   LAB ON A CHIP

Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues

(2012) Jordan S. Miller et al.   NATURE MATERIALS

Recent advances in bone tissue engineering scaffolds

(2012) Susmita Bose et al.   TRENDS IN BIOTECHNOLOGY

Cell patterning technologies for organotypic tissue fabrication

(2011) Bertrand Guillotin et al.   TRENDS IN BIOTECHNOLOGY

A Microfluidic Pipette for Single-Cell Pharmacology

(2010) Alar Ainla et al.   ANALYTICAL CHEMISTRY

Laser assisted bioprinting of engineered tissue with high cell density and microscale organization

(2010) Bertrand Guillotin et al.   BIOMATERIALS

Bone repair by cell-seeded 3D-bioplotted composite scaffolds made of collagen treated tricalciumphosphate or tricalciumphosphate-chitosan-collagen hydrogel or PLGA in ovine critical-sized calvarial defects

(2010) Kathrin Haberstroh et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Reactive inkjet printing of calcium alginate hydrogel porogens—a new strategy to open-pore structured matrices with controlled geometry

(2010) Joseph T. Delaney et al.   Soft Matter

Effects of surfactant and gentle agitation on inkjet dispensing of living cells

(2010) Shabnam Parsa et al.   Biofabrication

“One Cell−One Well”: A New Approach to Inkjet Printing Single Cell Microarrays

(2010) Albert R. Liberski et al.   ACS Combinatorial Science

Biodegradable microfluidic scaffolds for tissue engineering from amino alcohol-based poly(ester amide) elastomers

(2010) Jane Wang et al.   Organogenesis

The effect of scaffold architecture on properties of direct 3D fiber deposition of porous Ti6Al4V for orthopedic implants

(2009) J. P. Li et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

(2007) Rachel E. Saunders et al.   BIOMATERIALS