Applications of 3D printing in cardiovascular diseases

Three-Dimensional Printing as an Aid in Transcatheter Closure of Secundum Atrial Septal Defect With Rim Deficiency

(2016) Yan Chaowu et al.   CIRCULATION

The transcatheter valve technology pipeline for treatment of adult valvular heart disease

(2016) Hans R. Figulla et al.   EUROPEAN HEART JOURNAL

Treatment of right ventricular outflow tract dysfunction: a multimodality approach

(2016) Francesca Romana Pluchinotta et al.   EUROPEAN HEART JOURNAL SUPPLEMENTS

3D-printing model for complex aortic transcatheter valve treatment

(2016) Michele Gallo et al.   INTERNATIONAL JOURNAL OF CARDIOLOGY

Use of a semi-automated cardiac segmentation tool improves reproducibility and speed of segmentation of contaminated right heart magnetic resonance angiography

(2016) Animesh Tandon et al.   INTERNATIONAL JOURNAL OF CARDIOVASCULAR IMAGING

Transcatheter Aortic Valve Replacement in Transition ∗

(2016) John G. Webb et al.   JACC-Cardiovascular Interventions

3D Printed Modeling for Patient-Specific Mitral Valve Intervention

(2016) Stephen H. Little et al.   JACC-Cardiovascular Interventions

Use of three-dimensional models to assist in the resection of malignant cardiac tumors

(2016) Odeaa Al Jabbari et al.   JOURNAL OF CARDIAC SURGERY

Hemodynamic Testing of Patient-Specific Mitral Valves Using a Pulse Duplicator: A Clinical Application of Three-Dimensional Printing

(2016) Azad Mashari et al.   JOURNAL OF CARDIOTHORACIC AND VASCULAR ANESTHESIA

Left Atrial Appendage Closure Guided by 3D Printed Cardiac Reconstruction: Emerging Directions and Future Trends

(2016) PIER LUIGI PELLEGRINO et al.   JOURNAL OF CARDIOVASCULAR ELECTROPHYSIOLOGY

Dynamically scaled phantom phase contrast MRI compared to true-scale computational modeling of coronary artery flow

(2016) Susann Beier et al.   JOURNAL OF MAGNETIC RESONANCE IMAGING

FEASIBILITY AND RELATIVE ACCURACY OF THREE-DIMENSIONAL PRINTING OF NORMAL AND PATHOLOGIC TRICUSPID VALVES FROM TRANSTHORACIC THREE-DIMENSIONAL ECHOCARDIOGRAPHIC DATA SETS

(2016) Denisa Muraru et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

Cardiothoracic Applications of 3-dimensional Printing

(2016) Andreas A. Giannopoulos et al.   JOURNAL OF THORACIC IMAGING

Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology

(2016) Guk Bae Kim et al.   KOREAN JOURNAL OF RADIOLOGY

Will TAVR Become the Predominant Method for Treating Severe Aortic Stenosis?

(2016) Neil E. Moat   NEW ENGLAND JOURNAL OF MEDICINE

Three-dimensional printing for quality management in device closure of interatrial communications

(2016) Thomas Bartel et al.   European Heart Journal-Cardiovascular Imaging

Morphological analysis and preoperative simulation of a double-chambered right ventricle using 3-dimensional printing technology

(2016) Takashi Shirakawa et al.   Interactive Cardiovascular and Thoracic Surgery

3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement

(2016) Beth Ripley et al.   Journal of Cardiovascular Computed Tomography

3D Printing to Guide Ventricular Assist Device Placement in Adults With Congenital Heart Disease and Heart Failure

(2016) Kanwal M. Farooqi et al.   JACC-Heart Failure

Controlling the mechanical behavior of dual-material 3D printed meta-materials for patient-specific tissue-mimicking phantoms

(2016) Kan Wang et al.   MATERIALS & DESIGN

How Hypertrophic Cardiomyopathy Became a Contemporary Treatable Genetic Disease With Low Mortality

(2016) Barry J. Maron et al.   JAMA Cardiology

Drukowanie trójwymiarowego indywidualnego modelu serca pacjenta w planowaniu zabiegów przezskórnych w chorobach strukturalnych serca: opis technologii i prezentacja przypadku

(2016) Rafał Dankowski et al.   Kardiologia Polska

3D Printing of Intracranial Aneurysms Using Fused Deposition Modeling Offers Highly Accurate Replications

(2015) A.M.J. Frölich et al.   AMERICAN JOURNAL OF NEURORADIOLOGY

Use of 3D printed models in medical education: A randomized control trial comparing 3D prints versus cadaveric materials for learning external cardiac anatomy

(2015) Kah Heng Alexander Lim et al.   Anatomical Sciences Education

2015 ACC/HRS/SCAI Left Atrial Appendage Occlusion Device Societal Overview: A professional societal overview from the American College of Cardiology, Heart Rhythm Society, and Society for Cardiovascular Angiography and Interventions

(2015) Frederick A. Masoudi et al.   CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS

Development of a novel hybrid strategy for transcatheter pulmonary valve placement in patients following transannular patch repair of tetralogy of fallot

(2015) Alistair B. M. Phillips et al.   CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS

3D printed models for planning endovascular stenting in transverse aortic arch hypoplasia

(2015) Israel Valverde et al.   CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS

Myocardial 3-Dimensional Printing for Septal Myectomy Guidance in a Patient With Obstructive Hypertrophic Cardiomyopathy

(2015) Dong Hyun Yang et al.   CIRCULATION

Replicating Patient-Specific Severe Aortic Valve Stenosis With Functional 3D ModelingCLINICAL PERSPECTIVE

(2015) Dimitrios Maragiannis et al.   Circulation-Cardiovascular Imaging

Using 3D printed models for planning and guidance during endovascular intervention: a technical advance

(2015) Michael W. Itagaki   Diagnostic and Interventional Radiology

Left atrial appendage closure-indications, techniques, and outcomes: results of the European Heart Rhythm Association Survey

(2015) L. Pison et al.   EUROPACE

Three dimensional printing of an atrial septal defect: Is it multimodality imaging?

(2015) Giorgio Faganello et al.   INTERNATIONAL JOURNAL OF CARDIOVASCULAR IMAGING

Left Atrial Appendage Closure Guided by Personalized 3D-Printed Cardiac Reconstruction

(2015) James M. Otton et al.   JACC-Cardiovascular Interventions

Biomechanical Modeling to Improve Coronary Artery Bifurcation Stenting

(2015) Antonios P. Antoniadis et al.   JACC-Cardiovascular Interventions

Factors Affecting Dimensional Accuracy of 3-D Printed Anatomical Structures Derived from CT Data

(2015) Kent M. Ogden et al.   JOURNAL OF DIGITAL IMAGING

Development and testing of a silicone in vitro model of descending aortic dissection

(2015) Joav Birjiniuk et al.   JOURNAL OF SURGICAL RESEARCH

Low Operative Mortality Achieved With Surgical Septal Myectomy

(2015) Barry J. Maron et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

Three-Dimensional Printing of Intracardiac Defects from Three-Dimensional Echocardiographic Images: Feasibility and Relative Accuracy

(2015) Laura J. Olivieri et al.   JOURNAL OF THE AMERICAN SOCIETY OF ECHOCARDIOGRAPHY

Echocardiography and Three-Dimensional Printing: Sound Ideas to Touch a Heart

(2015) Kanwal M. Farooqi et al.   JOURNAL OF THE AMERICAN SOCIETY OF ECHOCARDIOGRAPHY

PC42. Phase-Contrast Magnetic Resonance Imaging Reveals Novel Fluid Dynamics in a Patient-Derived Silicone Model of Descending Thoracic Aortic Dissection

(2015) Ravi K. Veeraswamy et al.   JOURNAL OF VASCULAR SURGERY

Custom fenestration templates for endovascular repair of juxtarenal aortic aneurysms

(2015) Daniel F. Leotta et al.   JOURNAL OF VASCULAR SURGERY

Application of Virtual Three-Dimensional Models for Simultaneous Visualization of Intracardiac Anatomic Relationships in Double Outlet Right Ventricle

(2015) Kanwal M. Farooqi et al.   PEDIATRIC CARDIOLOGY

Three-dimensional Physical Modeling: Applications and Experience at Mayo Clinic

(2015) Jane S. Matsumoto et al.   RADIOGRAPHICS

Medical 3D Printing for the Radiologist

(2015) Dimitris Mitsouras et al.   RADIOGRAPHICS

Adapting anatomy teaching to surgical trends: a combination of classical dissection, medical imaging, and 3D-printing technologies

(2015) Jean H. D. Fasel et al.   SURGICAL AND RADIOLOGIC ANATOMY

Fusion of Information from 3D Printing and Surgical Robot: An Innovative Minimally Technique Illustrated by the Resection of a Large Celiac Trunk Aneurysm

(2015) Chady Salloum et al.   WORLD JOURNAL OF SURGERY

Surgical Planning by 3D Printing for Primary Cardiac Schwannoma Resection

(2015) Kuk Hui Son et al.   YONSEI MEDICAL JOURNAL

Three-Dimensional Printing of Mitral Valve Using Echocardiographic Data

(2015) Feroze Mahmood et al.   JACC-Cardiovascular Imaging

Transcatheter Caval Valve Implantation Using Multimodality Imaging

(2015) Brian O’Neill et al.   JACC-Cardiovascular Imaging

A Novel Approach to Neonatal Management of Tetralogy of Fallot, With Pulmonary Atresia, and Multiple Aortopulmonary Collaterals

(2015) Justin R. Ryan et al.   JACC-Cardiovascular Imaging

Percutaneous Interventions for Left Atrial Appendage Exclusion

(2015) Nina C. Wunderlich et al.   JACC-Cardiovascular Imaging

Adapting anatomy teaching to surgical trends: a combination of classical dissection, medical imaging, and 3D-printing technologies

(2015) Jean H. D. Fasel et al.   SURGICAL AND RADIOLOGIC ANATOMY

Three-dimensional virtual surgery models for percutaneous coronary intervention (PCI) optimization strategies

(2015) Hujun Wang et al.   Scientific Reports

3D-manufactured patient-specific models of congenital heart defects for communication in clinical practice: feasibility and acceptability

(2015) G. Biglino et al.   BMJ Open

Three-dimensional printed prototypes refine the anatomy of post-modified Norwood-1 complex aortic arch obstruction and allow presurgical simulation of the repair

(2015) Laszlo Kiraly et al.   Interactive Cardiovascular and Thoracic Surgery

Development of an algorithm to plan and simulate a new interventional procedure

(2015) Buntaro Fujita et al.   Interactive Cardiovascular and Thoracic Surgery

Using 3D printed models for planning and guidance during endovascular intervention: a technical advance

(2015) Michael W. Itagaki   Diagnostic and Interventional Radiology

Three-Dimensional Ultrasound-Derived Physical Mitral Valve Modeling

(2014) Walter R.T. Witschey et al.   ANNALS OF THORACIC SURGERY

Three-Dimensional Printing for Perioperative Planning of Complex Aortic Arch Surgery

(2014) Daniel Schmauss et al.   ANNALS OF THORACIC SURGERY

Three-dimensional patient-specific cardiac model for surgical planning in Nikaidoh procedure

(2014) Israel Valverde et al.   CARDIOLOGY IN THE YOUNG

Imaging for Preintervention Planning

(2014) Robin Chung et al.   Circulation-Cardiovascular Imaging

Myotonic dystrophy: time for evidence-based therapy

(2014) Perry Elliott   EUROPEAN HEART JOURNAL

Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience

(2014) Daniel Schmauss et al.   EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY

Bioprinting technology and its applications

(2014) Young-Joon Seol et al.   EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY

Personalised external aortic root support (PEARS) in Marfan syndrome: analysis of 1–9 year outcomes by intention-to-treat in a cohort of the first 30 consecutive patients to receive a novel tissue and valve-conserving procedure, compared with the published results of aortic root replacement

(2014) Tom Treasure et al.   HEART

3D heart model guides complex stent angioplasty of pulmonary venous baffle obstruction in a Mustard repair of D-TGA

(2014) Laura Olivieri et al.   INTERNATIONAL JOURNAL OF CARDIOLOGY

Percutaneous Pulmonary Valve Implantation in a Native Outflow Tract

(2014) Joseph T. Poterucha et al.   JACC-Cardiovascular Interventions

Development of Suepr Flexible Replica of Congenital Heart Disease with Stereolithography 3D Printing for Simulation Surgery and Medical Education

(2014) Isao Shiraishi et al.   JOURNAL OF CARDIAC FAILURE

Three-Dimensional Printing of the Mitral Annulus Using Echocardiographic Data: Science Fiction or in the Operating Room Next Door?

(2014) Khurram Owais et al.   JOURNAL OF CARDIOTHORACIC AND VASCULAR ANESTHESIA

Ultrasound-Derived Three-Dimensional Printing in Congenital Heart Disease

(2014) Bennett P. Samuel et al.   JOURNAL OF DIGITAL IMAGING

Use of a 3D Printed Hollow Aortic Model to Assist EVAR Planning in a Case With Complex Neck Anatomy: Potential of 3D Printing to Improve Patient Outcome

(2014) Matthew D. Tam et al.   JOURNAL OF ENDOVASCULAR THERAPY

Functional 3D Printed Patient-Specific Modeling of Severe Aortic Stenosis

(2014) Dimitrios Maragiannis et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

2014 AHA/ACC Guideline for the Management of Patients With Valvular Heart Disease

(2014) Rick A. Nishimura et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Incorporating Three-dimensional Printing into a Simulation-based Congenital Heart Disease and Critical Care Training Curriculum for Resident Physicians

(2014) John P. Costello et al.   Congenital Heart Disease

A personalized approach to interventional treatment of tricuspid regurgitation: experiences from an acute animal study

(2014) Andrea Amerini et al.   Interactive Cardiovascular and Thoracic Surgery

Three-dimensional printing physiology laboratory technology

(2013) Matthew S. Sulkin et al.   AMERICAN JOURNAL OF PHYSIOLOGY-HEART AND CIRCULATORY PHYSIOLOGY

Accuracy of medical models made by additive manufacturing (rapid manufacturing)

(2013) Mika Salmi et al.   JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY

3D Printing of an Aortic Aneurysm to Facilitate Decision Making and Device Selection for Endovascular Aneurysm Repair in Complex Neck Anatomy

(2013) Matthew D.B.S. Tam et al.   JOURNAL OF ENDOVASCULAR THERAPY

Left Atrial Appendage Occlusion

(2013) David R. Holmes et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

Three-dimensional printing of models for surgical planning in patients with primary cardiac tumors

(2013) Daniel Schmauss et al.   JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY

Temporal Trends in Survival Among Infants With Critical Congenital Heart Defects

(2013) M. E. Oster et al.   PEDIATRICS

ACR Appropriateness Criteria Imaging for Transcatheter Aortic Valve Replacement

(2013) Karin E. Dill et al.   Journal of the American College of Radiology

Heart Transplantation in Adults with Congenital Heart Disease

(2013) Garrick C. Stewart et al.   Heart Failure Clinics

Three-Dimensional Printing of Models for Preoperative Planning and Simulation of Transcatheter Valve Replacement

(2012) Daniel Schmauss et al.   ANNALS OF THORACIC SURGERY

Surgical Repair of Ventricular Septal Defect After Myocardial Infarction: Outcomes From The Society of Thoracic Surgeons National Database

(2012) George J. Arnaoutakis et al.   ANNALS OF THORACIC SURGERY

2012 focused update of the ESC Guidelines for the management of atrial fibrillation

(2012) et al.   EUROPEAN HEART JOURNAL

Benefits of surgery in obstructive hypertrophic cardiomyopathy: bring septal myectomy back for European patients

(2011) B. J. Maron et al.   EUROPEAN HEART JOURNAL

Long-Term Follow-Up of Percutaneous Repair of Paravalvular Prosthetic Regurgitation

(2011) Paul Sorajja et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

Birth Prevalence of Congenital Heart Disease Worldwide

(2011) Denise van der Linde et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

2011 ACCF/AHA Guideline for the Diagnosis and Treatment of Hypertrophic Cardiomyopathy

(2011) Bernard J. Gersh et al.   JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY

First-in-man implantation of a novel percutaneous valve: a new approach to medical device development

(2011) Silvia Schievano et al.   EuroIntervention

ESC Guidelines for the management of grown-up congenital heart disease (new version 2010): The Task Force on the Management of Grown-up Congenital Heart Disease of the European Society of Cardiology (ESC)

(2010) et al.   EUROPEAN HEART JOURNAL

Defining structural heart disease in the adult patient: current scope, inherent challenges and future directions

(2010) D. H. Steinberg et al.   EUROPEAN HEART JOURNAL SUPPLEMENTS

Indications and Outcomes of Surgical Closure of Ventricular Septal Defect in Adults

(2010) François-Pierre Mongeon et al.   JACC-Cardiovascular Interventions

Transcatheter Aortic-Valve Implantation for Aortic Stenosis in Patients Who Cannot Undergo Surgery

(2010) Martin B. Leon et al.   NEW ENGLAND JOURNAL OF MEDICINE

CT Angiography: Current Technology and Clinical Use

(2010) Kanako K. Kumamaru et al.   RADIOLOGIC CLINICS OF NORTH AMERICA

3-Dimensional Printing of Models to Create Custom-Made Devices for Coil Embolization of an Anastomotic Leak After Aortic Arch Replacement

(2009) Ralf Sodian et al.   ANNALS OF THORACIC SURGERY

The practical clinical value of three-dimensional models of complex congenitally malformed hearts

(2009) Eugénie Riesenkampff et al.   JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY

A new training set-up for trans-apical aortic valve replacement

(2009) Philippe Abdel-Sayed et al.   Interactive Cardiovascular and Thoracic Surgery

Manufacturing and placing a bespoke support for the Marfan aortic root: description of the method and technical results and status at one year for the first ten patients

(2009) John Pepper et al.   Interactive Cardiovascular and Thoracic Surgery

Physical Models Aiding in Complex Congenital Heart Surgery

(2008) Sibylle Mottl-Link et al.   ANNALS OF THORACIC SURGERY

Rapid Prototyping

(2008) Michael S. Kim et al.   CIRCULATION

Immediate primary transcatheter closure of postinfarction ventricular septal defects

(2008) H. Thiele et al.   EUROPEAN HEART JOURNAL

Pediatric cardiac transplantation: Three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart

(2008) Ralf Sodian et al.   JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY

In Vitro, Nonrigid Model of Aortic Arch Aneurysm

(2008) Abdulrazzaq Sulaiman et al.   JOURNAL OF VASCULAR AND INTERVENTIONAL RADIOLOGY

In vitro non-rigid life-size model of aortic arch aneurysm for endovascular prosthesis assessment

(2007) A SULAIMAN et al.   EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY

3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study

(2007) S. Jacobs et al.   Interactive Cardiovascular and Thoracic Surgery