Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Authors
Keywords
-
Journal
Acta Pharmaceutica Sinica B
Volume 11, Issue 8, Pages 2505-2536
Publisher
Elsevier BV
Online
2021-06-05
DOI
10.1016/j.apsb.2021.05.014
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Convection-Induced vs. Microwave Radiation-Induced in situ Drug Amorphization
- (2020) Nele-Johanna Hempel et al. MOLECULES
- The influence of drug and polymer particle size on the in situ amorphization using microwave irradiation
- (2020) Nele-Johanna Hempel et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Enhanced Dissolution of Luteolin by Solid Dispersion Prepared by Different Methods: Physicochemical Characterization and Antioxidant Activity
- (2020) Sultan Alshehri et al. ACS Omega
- Amorphous solid dispersions: An update for preparation, characterization, mechanism on bioavailability, stability, regulatory considerations and marketed products
- (2020) Palpandi Pandi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Solvent-Assisted Secondary Drying of Spray-Dried Polymers
- (2020) Kimberly B. Shepard et al. PHARMACEUTICAL RESEARCH
- Unraveling Particle Formation: From Single Droplet Drying to Spray Drying and Electrospraying
- (2020) Eline Boel et al. Pharmaceutics
- Water-Induced Phase Separation of Spray-Dried Amorphous Solid Dispersions
- (2020) Na Li et al. MOLECULAR PHARMACEUTICS
- Prediction of the physical stability of amorphous solid dispersions: relationship of aging and phase separation with the thermodynamic and kinetic models along with characterization techniques
- (2020) Zhaoyang Zhang et al. Expert Opinion on Drug Delivery
- Physical Stability and Dissolution of Lumefantrine Amorphous Solid Dispersions Produced by Spray Anti-Solvent Precipitation
- (2020) Sonal V. Bhujbal et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Characterization of amorphous solid dispersions: An update
- (2019) Xiangyu Ma et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
- (2019) Atheer Awad et al. Pharmaceutics
- Development and Evaluation of Poorly Water-Soluble Celecoxib as Solid Dispersions Containing Nonionic Surfactants Using Fluidized-Bed Granulation
- (2019) Hyeok Kwon et al. Pharmaceutics
- Water vapour sorption in tadalafil-Soluplus co-milled amorphous solid dispersions
- (2019) Piotr Nowak et al. POWDER TECHNOLOGY
- Combination of Colloidal Silicon Dioxide with Spray-Dried Solid Dispersion to Facilitate Discharge from an Agitated Dryer
- (2019) Yung-Chi Lee et al. AAPS PHARMSCITECH
- Modelling the Effect of Process Parameters on the Wet Extrusion and Spheronisation of High-Loaded Nicotinamide Pellets Using a Quality by Design Approach
- (2019) Eva-Maria Theismann et al. Pharmaceutics
- Characterization of Amorphous Solid Dispersion of Pharmaceutical Compound with pH-Dependent Solubility Prepared by Continuous-Spray Granulator
- (2019) Ryoma Tanaka et al. Pharmaceutics
- CFD–DEM–PBM coupled model development and validation of a 3D top-spray fluidized bed wet granulation process
- (2019) Ashutosh Tamrakar et al. COMPUTERS & CHEMICAL ENGINEERING
- Evaluation of the suitability of a fluidized bed process for the coating of drug-eluting stents
- (2019) Monika Wentzlaff et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Co-precipitation of calcium carbonate and curcumin in an ethanol medium as a novel approach for curcumin dissolution enhancement
- (2019) Huan Zhou et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
- (2019) Pamela Robles-Martinez et al. Pharmaceutics
- Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
- (2019) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Track-and-trace: Novel anti-counterfeit measures for 3D printed personalized drug products using smart material inks
- (2019) Sarah J. Trenfield et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Mechanisms of increased bioavailability through amorphous solid dispersions: a review
- (2019) Andreas Schittny et al. DRUG DELIVERY
- Manufacturing strategies to develop amorphous solid dispersions: An overview
- (2019) Nicole Mendonsa et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Chronotherapeutic Drug Delivery of Ketoprofen and Ibuprofen for Improved Treatment of Early Morning Stiffness in Arthritis Using Hot-Melt Extrusion Technology
- (2018) Nagi Reddy Dumpa et al. AAPS PHARMSCITECH
- Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
- (2018) Pamela Robles Martinez et al. AAPS PHARMSCITECH
- Expanding the Application and Formulation Space of Amorphous Solid Dispersions with KinetiSol®: a Review
- (2018) Daniel J. Ellenberger et al. AAPS PHARMSCITECH
- Reshaping drug development using 3D printing
- (2018) Atheer Awad et al. DRUG DISCOVERY TODAY
- Quantification of microwave-induced amorphization of celecoxib in PVP tablets using transmission Raman spectroscopy
- (2018) Magnus Edinger et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Improvement in the water solubility of drugs with a solid dispersion system by spray drying and hot-melt extrusion with using the amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer and d -mannitol
- (2018) Noriko Ogawa et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Amorphous solid dispersions of darunavir: Comparison between spray drying and electrospraying
- (2018) Annelies Smeets et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Influence of PVP molecular weight on the microwave assisted in situ amorphization of indomethacin
- (2018) Maria Doreth et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Tailored on demand anti-coagulant dosing: An in vitro and in vivo evaluation of 3D printed purpose-designed oral dosage forms
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Amorphous solid dispersions and nanocrystal technologies for poorly water-soluble drug delivery – An update
- (2018) Scott V. Jermain et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Surface area normalized dissolution to study differences in itraconazole-copovidone solid dispersions prepared by spray-drying and hot melt extrusion
- (2018) Vivekanand Bhardwaj et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabricating 3D printed orally disintegrating printlets using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
- (2018) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed medicines: A new branch of digital healthcare
- (2018) Atheer Awad et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of drug-loaded gyroid lattices using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Electron microscopy/energy dispersive X-ray spectroscopy of drug distribution in solid dispersions and interpretation by multifractal geometry
- (2018) Renata Abreu-Villela et al. JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
- Producing Amorphous Solid Dispersions via Co-Precipitation and Spray Drying: Impact to Physicochemical and Biopharmaceutical Properties
- (2018) Amanda K.P. Mann et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Qualitative and Quantitative Characterization of Composition Heterogeneity on the Surface of Spray Dried Amorphous Solid Dispersion Particles by an Advanced Surface Analysis Platform with High Surface Sensitivity and Superior Spatial Resolution
- (2018) Sonal V. Bhujbal et al. MOLECULAR PHARMACEUTICS
- Improved physical stability and aerosolization of inhalable amorphous ciprofloxacin powder formulations by incorporating synergistic colistin
- (2018) Nivedita Shetty et al. MOLECULAR PHARMACEUTICS
- Production of stable amorphous form by means of spray drying
- (2018) Igor Nežić et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Physical Stability of Amorphous Solid Dispersions: a Physicochemical Perspective with Thermodynamic, Kinetic and Environmental Aspects
- (2018) Xia Lin et al. PHARMACEUTICAL RESEARCH
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
- (2018) Evert Fuenmayor et al. Pharmaceutics
- 3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
- (2018) Sarah J Trenfield et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Powder bed 3D-printing of highly loaded drug delivery devices with hydroxypropyl cellulose as solid binder
- (2018) Sophia Infanger et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
- (2018) Kapilkumar Vithani et al. PHARMACEUTICAL RESEARCH
- Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
- (2018) Deck Tan et al. Pharmaceutics
- On the mechanism of colloidal silica action to improve flow properties of pharmaceutical excipients
- (2018) Diem Trang Tran et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Chemically identical but physically different: A comparison of spray drying, hot melt extrusion and cryo-milling for the formulation of high drug loaded amorphous solid dispersions of naproxen
- (2018) Sien Dedroog et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Investigation of itraconazole ternary amorphous solid dispersions based on povidone and Carbopol
- (2017) Fan Meng et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Spray drying ternary amorphous solid dispersions of ibuprofen – An investigation into critical formulation and processing parameters
- (2017) Ahmad Ziaee et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printed drug delivery devices: perspectives and technical challenges
- (2017) Mirja Palo et al. Expert Review of Medical Devices
- Enhancement of the Solubility of Poorly Water Soluble Drugs through Solid Dispersion: A Comprehensive Review
- (2017) G Singh et al. INDIAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Amorphization within the tablet: Using microwave irradiation to form a glass solution in situ
- (2017) Maria Doreth et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Moisture-induced phase separation and recrystallization in amorphous solid dispersions
- (2017) Christian Luebbert et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- A large-scale double-stage-screw 3D printer for fused deposition of plastic pellets
- (2017) Xiaojun Liu et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
- (2017) Natalja Genina et al. JOURNAL OF CONTROLLED RELEASE
- Synergetic Role of Hypromellose and Methacrylic Acid Copolymer in the Dissolution Improvement of Amorphous Solid Dispersions
- (2017) Naoko Ohyagi et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Effect of Temperature and Moisture on the Physical Stability of Binary and Ternary Amorphous Solid Dispersions of Celecoxib
- (2017) Tian Xie et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy
- (2017) Lucia Zema et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 1: Surface and Cross-Sectional Chemical Analysis
- (2017) Aswin Dereymaker et al. MOLECULAR PHARMACEUTICS
- Impact of Polymer Type and Relative Humidity on the Long-Term Physical Stability of Amorphous Solid Dispersions
- (2017) Kristin Lehmkemper et al. MOLECULAR PHARMACEUTICS
- Influence of the microwave technology on solid dispersions of mefenamic acid and flufenamic acid
- (2017) Sultan Alshehri et al. PLoS One
- Amorphization of crystalline active pharmaceutical ingredients via formulation technologies
- (2017) Ron Tau Yee Lim et al. POWDER TECHNOLOGY
- How Much Surface Coating of Hydrophobic Azithromycin Is Sufficient to Prevent Moisture-Induced Decrease in Aerosolisation of Hygroscopic Amorphous Colistin Powder?
- (2016) Qi Zhou et al. AAPS Journal
- Perspectives on the amorphisation/milling relationship in pharmaceutical materials
- (2016) M. Descamps et al. ADVANCED DRUG DELIVERY REVIEWS
- Amorphous solid dispersions: Rational selection of a manufacturing process
- (2016) Teófilo Vasconcelos et al. ADVANCED DRUG DELIVERY REVIEWS
- Spray drying formulation of amorphous solid dispersions
- (2016) Abhishek Singh et al. ADVANCED DRUG DELIVERY REVIEWS
- Application of ethyl cellulose, microcrystalline cellulose and octadecanol for wax based floating solid dispersion pellets
- (2016) Hong-Xiang Yan et al. CARBOHYDRATE POLYMERS
- Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole
- (2016) Soraya Hengsawas Surasarang et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- High energy ball milling and supercritical carbon dioxide impregnation as co-processing methods to improve dissolution of tadalafil
- (2016) Anna Krupa et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Solid dispersions of efonidipine hydrochloride ethanolate with improved physicochemical and pharmacokinetic properties prepared with microwave treatment
- (2016) Masafumi Otsuka et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Development of micro-fibrous solid dispersions of poorly water-soluble drugs in sucrose using temperature-controlled centrifugal spinning
- (2016) Stefania Marano et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Enabling thermal processing of ritonavir–polyvinyl alcohol amorphous solid dispersions by KinetiSol® Dispersing
- (2016) Justin S. LaFountaine et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
- (2016) Muqdad Alhijjaj et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Development and characterisation of sustained release solid dispersion oral tablets containing the poorly water soluble drug disulfiram
- (2016) Mandip Shergill et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Pharmaceutical development of an oral tablet formulation containing a spray dried amorphous solid dispersion of docetaxel or paclitaxel
- (2016) Emilia Sawicki et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
- (2016) Jonathan Goole et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
- (2016) Alvaro Goyanes et al. JOURNAL OF CONTROLLED RELEASE
- Novel tablet formulation of amorphous indomethacin using wet granulation with a high-speed mixer granulator combined with porous calcium silicate
- (2016) Yumi Fujimoto et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Polymeric Amorphous Solid Dispersions: A Review of Amorphization, Crystallization, Stabilization, Solid-State Characterization, and Aqueous Solubilization of Biopharmaceutical Classification System Class II Drugs
- (2016) Shrawan Baghel et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Pharmaceutical Applications of Electrospraying
- (2016) Duong Nhat Nguyen et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Mechanism of Dissolution-Induced Nanoparticle Formation from a Copovidone-Based Amorphous Solid Dispersion
- (2016) Paul Harmon et al. MOLECULAR PHARMACEUTICS
- On the inherent properties of Soluplus and its application in ibuprofen solid dispersions generated by microwave-quench cooling technology
- (2016) Nian-Qiu Shi et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Formulation and process considerations for the design of sildenafil-loaded polymeric microparticles by vibrational spray-drying
- (2016) Moritz Beck-Broichsitter et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
- (2016) Mohamed A. Alhnan et al. PHARMACEUTICAL RESEARCH
- Effects of Surface Composition on the Aerosolisation and Dissolution of Inhaled Antibiotic Combination Powders Consisting of Colistin and Rifampicin
- (2015) Wenbo Wang et al. AAPS Journal
- Thermal Processing of PVP- and HPMC-Based Amorphous Solid Dispersions
- (2015) Justin S. LaFountaine et al. AAPS PHARMSCITECH
- A New Extrudable Form of Hypromellose: AFFINISOL™ HPMC HME
- (2015) Siyuan Huang et al. AAPS PHARMSCITECH
- Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review
- (2015) Justin S. LaFountaine et al. AAPS PHARMSCITECH
- Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
- (2015) Hemlata Patil et al. AAPS PHARMSCITECH
- Effect of hydrophilic additives on the dissolution and pharmacokinetic properties of itraconazole-enteric polymer hot-melt extruded amorphous solid dispersions
- (2015) Bo Lang et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Polymeric formulations for drug release prepared by hot melt extrusion: application and characterization
- (2015) Milica Stanković et al. DRUG DISCOVERY TODAY
- Preparation, characterization and in vivo studies of amorphous solid dispersion of berberine with hydrogenated phosphatidylcholine
- (2015) Chunyang Shi et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Influence of degassing on hot-melt extrusion process
- (2015) Saad M. Alshahrani et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Solid state transformations in consequence of electrospraying – A novel polymorphic form of piroxicam
- (2015) Maija Nyström et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- A flexible-dose dispenser for immediate and extended release 3D printed tablets
- (2015) Katarzyna Pietrzak et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Preparation and comparison of spray dried and electrospun bioresorbable drug delivery systems
- (2015) Péter L. Sóti et al. EUROPEAN POLYMER JOURNAL
- Contribution of hot-melt extrusion technology to advance drug delivery in the 21st century
- (2015) Roshan V. Tiwari et al. Expert Opinion on Drug Delivery
- Effect of granule properties on rough mouth feel and palatability of orally disintegrating tablets
- (2015) Shin-ichiro Kimura et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Comparison of spray drying, electroblowing and electrospinning for preparation of Eudragit E and itraconazole solid dispersions
- (2015) Péter Lajos Sóti et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Optimization of the Büchi B-90 spray drying process using central composite design for preparation of solid dispersions
- (2015) Bing Gu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Solubility enhancement of BCS Class II drug by solid phospholipid dispersions: Spray drying versus freeze-drying
- (2015) Sophia Yui Kau Fong et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- High speed electrospinning for scaled-up production of amorphous solid dispersion of itraconazole
- (2015) Zsombor K. Nagy et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of tablets containing multiple drugs with defined release profiles
- (2015) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of geometry on drug release from 3D printed tablets
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Downstream processing of polymer-based amorphous solid dispersions to generate tablet formulations
- (2015) B. Démuth et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- Enhanced solubility and dissolution of curcumin by a hydrophilic polymer solid dispersion and its insilico molecular modeling studies
- (2015) Avinash B. Gangurde et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Performance and Efficiency of Pressure-Swirl and Twin-Fluid Nozzles Spraying Food Liquids with Varying Viscosity
- (2015) Philipp Stähle et al. JOURNAL OF FOOD PROCESS ENGINEERING
- Pharmaceutical microparticle engineering with electrospraying: the role of mixed solvent systems in particle formation and characteristics
- (2015) Adam Bohr et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Compression Effects on the Phase Behaviour of Miconazole-Poly (1-Vinylpyrrolidone-Co-Vinyl Acetate) Solid Dispersions—Role of Pressure, Dwell Time, and Preparation Method
- (2015) Abhishek Singh et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- The Effects of Screw Configuration and Polymeric Carriers on Hot-Melt Extruded Taste-Masked Formulations Incorporated into Orally Disintegrating Tablets
- (2015) Joseph T. Morott et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Zidovudine-Poly(l-Lactic Acid) Solid Dispersions with Improved Intestinal Permeability Prepared by Supercritical Antisolvent Process
- (2015) Valquíria M.H. Yoshida et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Amorphous Solid Dispersions: Utilization and Challenges in Drug Discovery and Development
- (2015) Yan He et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Preparation, in-vitro and in-vivo evaluation of spray-dried ternary solid dispersion of biopharmaceutics classification system class II model drug
- (2015) Sharan K. Paidi et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Novel Supercritical Carbon Dioxide Impregnation Technique for the Production of Amorphous Solid Drug Dispersions: A Comparison to Hot Melt Extrusion
- (2015) Catherine Potter et al. MOLECULAR PHARMACEUTICS
- 3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
- (2015) Alvaro Goyanes et al. MOLECULAR PHARMACEUTICS
- Impact of Surfactants on the Crystallization of Aqueous Suspensions of Celecoxib Amorphous Solid Dispersion Spray Dried Particles
- (2015) Jie Chen et al. MOLECULAR PHARMACEUTICS
- Engineering hybrid polymer-protein super-aligned nanofibers via rotary jet spinning
- (2014) Mohammad R. Badrossamay et al. BIOMATERIALS
- Effects of preparing techniques and aging on dissolution behavior of the solid dispersions of NF/Soluplus/Kollidon SR: identification and classification by a combined analysis by FT-IR spectroscopy and computational approaches
- (2014) Xiang Li et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Fabrication and evaluation of valsartan–polymer–surfactant composite nanoparticles by using the supercritical antisolvent process
- (2014) Min-Soo Kim et al. International Journal of Nanomedicine
- Physical and dissolution characterization of cilostazol solid dispersions prepared by hot melt granulation (HMG) and thermal adhesion granulation (TAG) methods
- (2014) Ying-Chen Chen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- In silico modeling of in situ fluidized bed melt granulation
- (2014) Ivana Aleksić et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- A review of monitoring methods for pharmaceutical wet granulation
- (2014) E.M. Hansuld et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Analysis of niflumic acid prepared by rapid microwave-assisted evaporation
- (2014) Norbert Radacsi et al. JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
- What Is the Mechanism Behind Increased Permeation Rate of a Poorly Soluble Drug from Aqueous Dispersions of an Amorphous Solid Dispersion?
- (2014) Kerstin J. Frank et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Producing Pharmaceutical Particles via Electrospraying with an Emphasis on Nano and Nano Structured Particles - A Review
- (2014) Caner U. Yurteri et al. KONA Powder and Particle Journal
- Molecular Implications of Drug–Polymer Solubility in Understanding the Destabilization of Solid Dispersions by Milling
- (2014) Ziyi Yang et al. MOLECULAR PHARMACEUTICS
- A Stable Amorphous Statin: Solid-State NMR and Dielectric Studies on Dynamic Heterogeneity of Simvastatin
- (2014) Teresa G. Nunes et al. MOLECULAR PHARMACEUTICS
- Drug–Polymer Miscibility across a Spray Dryer: A Case Study of Naproxen and Miconazole Solid Dispersions
- (2014) Zelalem Ayenew Worku et al. MOLECULAR PHARMACEUTICS
- A New Twist in the Old Story-can Compression Induce Mixing of Phase Separated Solid Dispersions? A Case Study of Spray-Dried Miconazole-PVP VA64 Solid Dispersions
- (2014) Abhishek Singh et al. PHARMACEUTICAL RESEARCH
- The Effect of Polymeric Excipients on the Physical Properties and Performance of Amorphous Dispersions: Part I, Free Volume and Glass Transition
- (2014) Jinjiang Li et al. PHARMACEUTICAL RESEARCH
- Dispersity and spinnability: Why highly polydisperse polymer solutions are desirable for electrospinning
- (2014) Ljiljana Palangetic et al. POLYMER
- In vitro and in vivo evaluation of clarithromycin–urea solid dispersions prepared by solvent evaporation, electrospraying and freeze drying methods
- (2014) Ghobad Mohammadi et al. POWDER TECHNOLOGY
- Development and evaluation of lafutidine solid dispersion via hot melt extrusion: Investigating drug-polymer miscibility with advanced characterisation
- (2014) Ritesh Fule et al. Asian Journal of Pharmaceutical Sciences
- Amorphous Solid Dispersions of Sulfonamide/Soluplus® and Sulfonamide/PVP Prepared by Ball Milling
- (2013) Vincent Caron et al. AAPS PHARMSCITECH
- Enhancement of solubility and dissolution rate of poorly water soluble raloxifene using microwave induced fusion method
- (2013) Payal Hasmukhlal Patil et al. Brazilian Journal of Pharmaceutical Sciences
- Liquid–Liquid Phase Separation in Highly Supersaturated Aqueous Solutions of Poorly Water-Soluble Drugs: Implications for Solubility Enhancing Formulations
- (2013) Grace A. Ilevbare et al. CRYSTAL GROWTH & DESIGN
- In-vitroandin-vivostudy of amorphous spironolactone prepared by adsorption method using supercritical CO2
- (2013) Qikun Jiang et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Process monitoring of ultrasound compaction as a small-scale heating process
- (2013) Hiroshi Ueda et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Current trends and future perspectives of solid dispersions containing poorly water-soluble drugs
- (2013) Chau Le-Ngoc Vo et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Printing technologies in fabrication of drug delivery systems
- (2013) Ruzica Kolakovic et al. Expert Opinion on Drug Delivery
- Enhancing bioavailability through thermal processing
- (2013) Justin M. Keen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Highly efficient miniaturized coprecipitation screening (MiCoS) for amorphous solid dispersion formulation development
- (2013) Qingyan Hu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of amorphous solid dispersion formulations of a poorly water-soluble drug, MK-0364
- (2013) S. Sotthivirat et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Characterization and performance assessment of solid dispersions prepared by hot melt extrusion and spray drying process
- (2013) Anjali M. Agrawal et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Amorphous solid dispersions and nano-crystal technologies for poorly water-soluble drug delivery
- (2013) Chris Brough et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Investigation into mixing capability and solid dispersion preparation using the DSM Xplore Pharma Micro Extruder
- (2013) Toshiro Sakai et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- The utilization of drug-polymer interactions for improving the chemical stability of hot-melt extruded solid dispersions
- (2013) Zhefei Guo et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Effect of composition in the development of carbamazepine hot-melt extruded solid dispersions by application of mixture experimental design
- (2013) Jelena Djuris et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Hot Melt Extrusion for Amorphous Solid Dispersions: Temperature and Moisture Activated Drug–Polymer Interactions for Enhanced Stability
- (2013) Ashish L. Sarode et al. MOLECULAR PHARMACEUTICS
- Microstructure of an Immiscible Polymer Blend and Its Stabilization Effect on Amorphous Solid Dispersions
- (2013) Ziyi Yang et al. MOLECULAR PHARMACEUTICS
- Microwave assisted drying of cellulose derivative (HPMC) granular solids
- (2013) Anna Angela Barba et al. POWDER TECHNOLOGY
- Fundamental aspects of solid dispersion technology for poorly soluble drugs
- (2013) Yanbin Huang et al. Acta Pharmaceutica Sinica B
- The Effects of Supercritical Carbon Dioxide Processing on Progesterone Dispersion Systems: a Multivariate Study
- (2012) James R. Falconer et al. AAPS PHARMSCITECH
- Preparation, Characterization and in Vivo Evaluation of Antihyperglycemic Activity of Microwave Generated Repaglinide Solid Dispersion
- (2012) Laxmikant Ramvallabh Zawar et al. CHEMICAL & PHARMACEUTICAL BULLETIN
- Polymer Combination Increased Both Physical Stability and Oral Absorption of Solid Dispersions Containing a Low Glass Transition Temperature Drug: Physicochemical Characterization and in Vivo Study
- (2012) Atsushi Sakurai et al. CHEMICAL & PHARMACEUTICAL BULLETIN
- Multi-objective ant colony optimization for the twin-screw configuration problem
- (2012) Cristina Teixeira et al. ENGINEERING OPTIMIZATION
- Can compression induce demixing in amorphous solid dispersions? A case study of naproxen–PVP K25
- (2012) Zelalem Ayenew et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Preparation and characterization of fusion processed solid dispersions containing a viscous thermally labile polymeric carrier
- (2012) Justin R. Hughey et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Manufacturing of solid dispersions of poorly water soluble drugs by spray drying: Formulation and process considerations
- (2012) Amrit Paudel et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Melt extrusion with poorly soluble drugs
- (2012) Sejal Shah et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication and evaluation of pH-modulated solid dispersion for telmisartan by spray-drying technique
- (2012) Nirmal Marasini et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Charge generation, charge transport, and residual charge in the electrospinning of polymers: A review of issues and complications
- (2012) George Collins et al. JOURNAL OF APPLIED PHYSICS
- Solid-State Vitrification of Crystalline Griseofulvin by Mechanical Milling
- (2012) Jean-François Willart et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Improved Human Bioavailability of Vemurafenib, a Practically Insoluble Drug, Using an Amorphous Polymer-Stabilized Solid Dispersion Prepared by a Solvent-Controlled Coprecipitation Process
- (2012) Navnit Shah et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Release profile and characteristics of electrosprayed particles for oral delivery of a practically insoluble drug
- (2012) A. Bohr et al. Journal of the Royal Society Interface
- A Win–Win Solution in Oral Delivery of Lipophilic Drugs: Supersaturation via Amorphous Solid Dispersions Increases Apparent Solubility without Sacrifice of Intestinal Membrane Permeability
- (2012) Jonathan M. Miller et al. MOLECULAR PHARMACEUTICS
- Oral transmucosal delivery of domperidone from immediate release films produced via hot-melt extrusion technology
- (2012) Chinna Reddy Palem et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Formulation and process design for a solid dosage form containing a spray-dried amorphous dispersion of ibipinabant
- (2012) Michael M. Leane et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Supercritical fluid technology: a promising approach in pharmaceutical research
- (2012) Priti Girotra et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Effect of Compression on Non-isothermal Crystallization Behaviour of Amorphous Indomethacin
- (2012) Zelalem Ayenew et al. PHARMACEUTICAL RESEARCH
- Particle formation and characteristics of Celecoxib-loaded poly(lactic-co-glycolic acid) microparticles prepared in different solvents using electrospraying
- (2012) Adam Bohr et al. POLYMER
- Electrospraying of polymers with therapeutic molecules: State of the art
- (2012) N. Bock et al. PROGRESS IN POLYMER SCIENCE
- BDDCS Applied to Over 900 Drugs
- (2011) Leslie Z. Benet et al. AAPS Journal
- Controlled Microwave Processing Applied to the Pharmaceutical Formulation of Ibuprofen
- (2011) Laura J. Waters et al. AAPS PHARMSCITECH
- Controlling drug nanoparticle formation by rapid precipitation
- (2011) Suzanne M. D'Addio et al. ADVANCED DRUG DELIVERY REVIEWS
- A simple model for nanofiber formation by rotary jet-spinning
- (2011) Paula Mellado et al. APPLIED PHYSICS LETTERS
- Solubility Advantage of Amorphous Drugs and Pharmaceutical Cocrystals
- (2011) N. Jagadeesh Babu et al. CRYSTAL GROWTH & DESIGN
- Nimodipine (NM) tablets with high dissolution containing NM solid dispersions prepared by hot-melt extrusion
- (2011) Fu Jijun et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Bridging solubility between drug discovery and development
- (2011) Li Di et al. DRUG DISCOVERY TODAY
- Melt extrusion: process to product
- (2011) Michael A Repka et al. Expert Opinion on Drug Delivery
- Improved dissolution behavior of lipophilic drugs by solid dispersions: the production process as starting point for formulation considerations
- (2011) Parinda Srinarong et al. Expert Opinion on Drug Delivery
- Preparation of microspheres containing low solubility drug compound by electrohydrodynamic spraying
- (2011) Adam Bohr et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Mucoadhesive platforms for targeted delivery to the colon
- (2011) Felipe J.O. Varum et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Preparation, characterization and in vivo assessment of the bioavailability of glycyrrhizic acid microparticles by supercritical anti-solvent process
- (2011) Xiaoyu Sui et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of amorphous pharmaceutical materials by electrospraying into reduced pressure
- (2011) M. Nyström et al. JOURNAL OF ELECTROSTATICS
- Dissolution and Precipitation Behavior of Amorphous Solid Dispersions
- (2011) David E. Alonzo et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Comparison of Electrospun and Extruded Soluplus®-Based Solid Dosage Forms of Improved Dissolution
- (2011) Zsombor K. Nagy et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Barrier Coated Drug Layered Particles for Enhanced Performance of Amorphous Solid Dispersion Dosage Form
- (2011) Vibha Puri et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Assessing the performance of amorphous solid dispersions
- (2011) Ann Newman et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- PEG/PLA core/shell particles from coaxial electrohydrodynamic spray drying
- (2011) Hwanki Ho et al. MACROMOLECULAR RESEARCH
- Coaxial Electrospray Formulations for Improving Oral Absorption of a Poorly Water-Soluble Drug
- (2011) Shaoling Zhang et al. MOLECULAR PHARMACEUTICS
- Improving the Chemical Stability of Amorphous Solid Dispersion with Cocrystal Technique by Hot Melt Extrusion
- (2011) Xu Liu et al. PHARMACEUTICAL RESEARCH
- Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
- (2011) Asma B. M. Buanz et al. PHARMACEUTICAL RESEARCH
- Order-to-Disorder Transition in Ring-Shaped Colloidal Stains
- (2011) Álvaro G. Marín et al. PHYSICAL REVIEW LETTERS
- Comparison of Spray Freeze Drying and the Solvent Evaporation Method for Preparing Solid Dispersions of Baicalein with Pluronic F68 to Improve Dissolution and Oral Bioavailability
- (2010) Xiuqiong He et al. AAPS PHARMSCITECH
- Solid Dispersion as an Approach for Bioavailability Enhancement of Poorly Water-Soluble Drug Ritonavir
- (2010) Shilpi Sinha et al. AAPS PHARMSCITECH
- Characterization of solid dispersions of itraconazole and vitamin E TPGS prepared by microwave technology
- (2010) Mariarosa Moneghini et al. Future Medicinal Chemistry
- Preparation and pharmaceutical characterization of amorphous cefdinir using spray-drying and SAS-process
- (2010) Junsung Park et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Melt granulation of pharmaceutical powders: A comparison of high-shear mixer and fluidised bed processes
- (2010) Nadia Passerini et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- A Solid-State Approach to Enable Early Development Compounds: Selection and Animsal Bioavailability Studies of an Itraconazole Amorphous Solid Dispersion
- (2010) David Engers et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- A Classification System to Assess the Crystallization Tendency of Organic Molecules from Undercooled Melts
- (2010) Jared A. Baird et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Crystallization Tendency of Active Pharmaceutical Ingredients Following Rapid Solvent Evaporation—Classification and Comparison with Crystallization Tendency from Under cooled Melts
- (2010) Bernard Van Eerdenbrugh et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Drug–Polymer Solubility and Miscibility: Stability Consideration and Practical Challenges in Amorphous Solid Dispersion Development
- (2010) Feng Qian et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Review: physical chemistry of solid dispersions
- (2010) Sandrien Janssens et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Microwave induced solubility enhancement of poorly water soluble atorvastatin calcium
- (2010) Durgaprasad Maurya et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Stability-enhanced solid dispersion formulation of amorphous raloxifene hydrochloride
- (2010) Chin Sung Cho et al. KOREAN JOURNAL OF CHEMICAL ENGINEERING
- Influence of Preparation Methods on Solid State Supersaturation of Amorphous Solid Dispersions: A Case Study with Itraconazole and Eudragit E100
- (2010) Sandrien Janssens et al. PHARMACEUTICAL RESEARCH
- Superhigh-Throughput Needleless Electrospinning Using a Rotary Cone as Spinneret
- (2010) Bingan Lu et al. Small
- Effects of Moisture on the Growth Rate of Felodipine Crystals in the Presence and Absence of Polymers
- (2009) Alfred C. F. Rumondor et al. CRYSTAL GROWTH & DESIGN
- Development of injection moulded matrix tablets based on mixtures of ethylcellulose and low-substituted hydroxypropylcellulose
- (2009) Thomas Quinten et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Correlating thermodynamic and kinetic parameters with amorphous stability
- (2009) Kirsten A. Graeser et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol® dispersing
- (2009) James C. DiNunzio et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Vapor Pressures of Polymer Solutions and the Modeling of Their Composition Dependence
- (2009) Maria Bercea et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Application of melt granulation technology to enhance stability of a moisture sensitive immediate-release drug product
- (2009) James Kowalski et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effects of extrusion process parameters on the dissolution behavior of indomethacin in Eudragit® E PO solid dispersions
- (2009) Huiju Liu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication and characterization of drug particles produced by electrospraying into reduced pressure
- (2009) M. Nyström et al. JOURNAL OF ELECTROSTATICS
- Spray Drying Technique. I: Hardware and Process Parameters
- (2009) Krzysztof Cal et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Islands of Immiscibility for Solutions of Compatible Polymers in a Common Solvent: Experiment and Theory
- (2009) Maria Bercea et al. MACROMOLECULES
- Oral fast-dissolving drug delivery membranes prepared from electrospun polyvinylpyrrolidone ultrafine fibers
- (2009) Deng-Guang Yu et al. NANOTECHNOLOGY
- Physical characterization of meloxicam-β-cyclodextrin inclusion complex pellets prepared by a fluid-bed coating method
- (2009) Yi Lu et al. Particuology
- Effects of Polymer Type and Storage Relative Humidity on the Kinetics of Felodipine Crystallization from Amorphous Solid Dispersions
- (2009) Alfred C. F. Rumondor et al. PHARMACEUTICAL RESEARCH
- Influence of the microwave technology on the physical–chemical properties of solid dispersion with Nimesulide
- (2009) Mariarosa Moneghini et al. POWDER TECHNOLOGY
- A Model-Based Methodology for Spray-Drying Process Development
- (2009) Dan E. Dobry et al. Journal of Pharmaceutical Innovation
- Use of the Biopharmaceutical Classification System in Early Drug Development
- (2008) M. Sherry Ku AAPS Journal
- Effect of polymer type on the dissolution profile of amorphous solid dispersions containing felodipine
- (2008) Hajime Konno et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Preparation, characterization and in vivo evaluation of amorphous atorvastatin calcium nanoparticles using supercritical antisolvent (SAS) process
- (2008) Min-Soo Kim et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Microscale granulation in a fluid bed powder processor using electrostatic atomisation
- (2008) N KIVIKERO et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Microwave generated solid dispersions containing Ibuprofen
- (2008) Mariarosa Moneghini et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Process and formulation characterizations of the thermal adhesion granulation (TAG) process for improving granular properties
- (2008) Hong-Liang Lin et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Process parameters and morphology in puerarin, phospholipids and their complex microparticles generation by supercritical antisolvent precipitation
- (2008) Ying Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Physicochemical properties and oral bioavailability of amorphous atorvastatin hemi-calcium using spray-drying and SAS process
- (2008) Jeong-Soo Kim et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Dissolution-rate enhancement of fenofibrate by adsorption onto silica using supercritical carbon dioxide
- (2008) Ganesh P. Sanganwar et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Narrow size distribution nanoparticle production by electrospray processing of ferritin
- (2008) Christopher J. Hogan et al. JOURNAL OF AEROSOL SCIENCE
- Microwave-induced enhancement of the dissolution rate of poorly water-soluble tibolone from poly(ethylene glycol) solid dispersions
- (2008) Sofia Anastasios Papadimitriou et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Electrospraying route to nanotechnology: An overview
- (2008) A. Jaworek et al. JOURNAL OF ELECTROSTATICS
- Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying
- (2008) Renata V. Tonon et al. JOURNAL OF FOOD ENGINEERING
- Solid State Amorphization of Pharmaceuticals
- (2008) J. F. Willart et al. MOLECULAR PHARMACEUTICS
- Scaling Up the Spray Drying Process from Pilot to Production Scale Using an Atomized Droplet Size Criterion
- (2008) Pia Thybo et al. PHARMACEUTICAL RESEARCH
- Use of Microwave in Processing of Drug Delivery Systems
- (2008) T. Wong Current Drug Delivery
- Supercritical fluid technologies: An innovative approach for manipulating the solid-state of pharmaceuticals
- (2007) Irene Pasquali et al. ADVANCED DRUG DELIVERY REVIEWS
- The manufacture and characterisation of hot-melt extruded enteric tablets
- (2007) Gavin P. Andrews et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion
- (2007) E. Verhoeven et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Method for screening of solid dispersion formulations of low-solubility compounds—Miniaturization and automation of solvent casting and dissolution testing
- (2007) A SHANBHAG et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Evaluation of solid state properties of solid dispersions prepared by hot-melt extrusion and solvent co-precipitation
- (2007) Zedong Dong et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Characterization of Ternary Solid Dispersions of Itraconazole, PEG 6000, and HPMC 2910 E5
- (2007) Sandrien Janssens et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Polymorph Transitions of Bicalutamide: A Remarkable Example of Mechanical Activation
- (2007) Zoltán Német et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Enhanced dissolution of silymarin/polyvinylpyrrolidone solid dispersion pellets prepared by a one-step fluid-bed coating technique
- (2007) Ningyun Sun et al. POWDER TECHNOLOGY
- Physical characterization of lansoprazole/PVP solid dispersion prepared by fluid-bed coating technique
- (2007) Xingwang Zhang et al. POWDER TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now