An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
Published 2018 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
Authors
Keywords
-
Journal
PHARMACEUTICAL RESEARCH
Volume 36, Issue 1, Pages -
Publisher
Springer Nature America, Inc
Online
2018-11-08
DOI
10.1007/s11095-018-2531-1
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems
- (2018) Jiaxiang Zhang et al. AAPS PHARMSCITECH
- Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
- (2018) Pamela Robles Martinez et al. AAPS PHARMSCITECH
- Reshaping drug development using 3D printing
- (2018) Atheer Awad et al. DRUG DISCOVERY TODAY
- Personalisation of warfarin therapy using thermal ink-jet printing
- (2018) Parameswara Rao Vuddanda et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- On demand manufacturing of patient-specific liquid capsules via co-ordinated 3D printing and liquid dispensing
- (2018) Tochukwu C. Okwuosa et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Solubilisation behaviour of poorly water-soluble drugs during digestion of solid SMEDDS
- (2018) Kapilkumar Vithani et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
- (2018) Qijun Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D extrusion printing of high drug loading immediate release paracetamol tablets
- (2018) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabricating 3D printed orally disintegrating printlets using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
- (2018) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
- (2018) Gayathri Kollamaram et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed medicines: A new branch of digital healthcare
- (2018) Atheer Awad et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of drug-loaded gyroid lattices using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- 3D printing of a wearable personalized oral delivery device: A first-in-human study
- (2018) Kun Liang et al. Science Advances
- 3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
- (2018) Sarah J Trenfield et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism
- (2018) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of Novel 3-D Printed Scaffolds With Core-Shell Nanoparticles for Nerve Regeneration
- (2017) Se-Jun Lee et al. IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING
- Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration
- (2017) Cem Varan et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
- (2017) Zaid Muwaffak et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Patient acceptability of 3D printed medicines
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Dropwise additive manufacturing of pharmaceutical products for amorphous and self emulsifying drug delivery systems
- (2017) Elçin Içten et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Selective laser sintering (SLS) 3D printing of medicines
- (2017) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
- (2017) Pamela Robles Martinez et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
- (2017) R.C.R. Beck et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed multi-compartment capsular devices for two-pulse oral drug delivery
- (2017) A. Maroni et al. JOURNAL OF CONTROLLED RELEASE
- 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
- (2017) Mary Kyobula et al. JOURNAL OF CONTROLLED RELEASE
- Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
- (2017) Natalja Genina et al. JOURNAL OF CONTROLLED RELEASE
- Fabrication and tissue engineering application of a 3D PPF/DEF scaffold using Blu-ray based 3D printing system
- (2017) Jae-Hun Kim et al. Journal of Mechanical Science and Technology
- Printed Drug-Delivery Systems for Improved Patient Treatment
- (2017) Niklas Sandler et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- 3D metal droplet printing development and advanced materials additive manufacturing
- (2017) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
- (2016) Natalja Genina et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
- (2016) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
- (2016) Jie Wang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
- (2016) Muzna Sadia et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
- (2016) Alvaro Goyanes et al. JOURNAL OF CONTROLLED RELEASE
- 3d printing technologies applied for food design: Status and prospects
- (2016) Fernanda C. Godoi et al. JOURNAL OF FOOD ENGINEERING
- Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
- (2016) Tochukwu C. Okwuosa et al. PHARMACEUTICAL RESEARCH
- Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
- (2016) Mohamed A. Alhnan et al. PHARMACEUTICAL RESEARCH
- Biomimetic 3D tissue printing for soft tissue regeneration
- (2015) Falguni Pati et al. BIOMATERIALS
- Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking
- (2015) Scott A. Irvine et al. BIOMEDICAL MICRODEVICES
- Photopatterning of hydrogel scaffolds coupled to filter materials using stereolithography for perfused 3D culture of hepatocytes
- (2015) Jaclyn A. Shepard Neiman et al. BIOTECHNOLOGY AND BIOENGINEERING
- 3D printing in dentistry
- (2015) A. Dawood et al. BRITISH DENTAL JOURNAL
- Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility
- (2015) Yingying Du et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Recent development in 3D food printing
- (2015) Fan Yang et al. CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION
- 3D Printing technologies for drug delivery: a review
- (2015) Leena Kumari Prasad et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
- (2015) Justyna Skowyra et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- A flexible-dose dispenser for immediate and extended release 3D printed tablets
- (2015) Katarzyna Pietrzak et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Personalised dosing: Printing a dose of one’s own medicine
- (2015) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of tablets containing multiple drugs with defined release profiles
- (2015) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of geometry on drug release from 3D printed tablets
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Inkjet printing for pharmaceutics – A review of research and manufacturing
- (2015) Ronan Daly et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- 3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
- (2015) Alice Melocchi et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Review: Polymeric-Based 3D Printing for Tissue Engineering
- (2015) Geng-Hsi Wu et al. Journal of Medical and Biological Engineering
- Dropwise Additive Manufacturing of Pharmaceutical Products for Melt-Based Dosage Forms
- (2015) Elçn Içten et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
- (2015) Jorrit Jeroen Water et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- 3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
- (2015) Alvaro Goyanes et al. MOLECULAR PHARMACEUTICS
- Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering
- (2015) Alida Mazzoli et al. RAPID PROTOTYPING JOURNAL
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- 3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
- (2015) Fu-Yu Hsieh et al. Organogenesis
- Recent advances in 3D printing of biomaterials
- (2015) Helena N Chia et al. Journal of Biological Engineering
- Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
- (2014) Bethany C. Gross et al. ANALYTICAL CHEMISTRY
- Fused-filament 3D printing (3DP) for fabrication of tablets
- (2014) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3-dimensional (3D) fabricated polymer based drug delivery systems
- (2014) Simon E. Moulton et al. JOURNAL OF CONTROLLED RELEASE
- Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering
- (2014) Chih-Hao Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Preparing the ground for tissue regeneration: from mechanism to therapy
- (2014) Stuart J Forbes et al. NATURE MEDICINE
- Rapid and Low-cost Prototyping of Medical Devices Using 3D Printed Molds for Liquid Injection Molding
- (2014) Philip Chung et al. Jove-Journal of Visualized Experiments
- Lipid-based formulations for oral administration of poorly water-soluble drugs
- (2013) Huiling Mu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Towards fabrication of 3D printed medical devices to prevent biofilm formation
- (2013) Niklas Sandler et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Desktop 3D printing of controlled release pharmaceutical bilayer tablets
- (2013) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Crystallization and Dissolution Behavior of Naproxen/Polyethylene Glycol Solid Dispersions
- (2013) Qing Zhu et al. JOURNAL OF PHYSICAL CHEMISTRY B
- Three-dimensional drug printing: A structured review
- (2013) Iulia D. Ursan et al. JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- 3D Printing and Neurosurgery—Ready for Prime Time?
- (2013) Geraldine T. Klein et al. World Neurosurgery
- New World of 3-D Printing Offers "Completely New Ways of Thinking": Q&A with Author, Engineer, and 3-D Printing Expert Hod Lipson
- (2013) Leslie Mertz IEEE Pulse
- Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system
- (2012) Byung Kook Lee et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
- (2011) Laura Elomaa et al. Acta Biomaterialia
- Inkjet printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopedic implants
- (2011) Yexin Gu et al. Acta Biomaterialia
- Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes
- (2011) Ansgar Waldbaur et al. Analytical Methods
- Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines
- (2011) Jana Pardeike et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms
- (2011) Parawee Rattanakit et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Inkjet printing as a novel medicine formulation technique
- (2011) Nikolaos Scoutaris et al. JOURNAL OF CONTROLLED RELEASE
- Inkjet printing of drug substances and use of porous substrates‐towards individualized dosing
- (2011) Niklas Sandler et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
- (2011) Asma B. M. Buanz et al. PHARMACEUTICAL RESEARCH
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly( d,l -lactide)-based resins
- (2010) Tetsu M. Seck et al. JOURNAL OF CONTROLLED RELEASE
- Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation
- (2010) Vincent Chan et al. LAB ON A CHIP
- 3D printing based on imaging data: review of medical applications
- (2010) F. Rengier et al. International Journal of Computer Assisted Radiology and Surgery
- Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
- (2009) Karina Arcaute et al. Acta Biomaterialia
- A novel fast disintegrating tablet fabricated by three-dimensional printing
- (2009) Deng-Guang Yu et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- The controlled-releasing drug implant based on the three dimensional printing technology: Fabrication and properties of drug releasing in vivo
- (2009) Weigang Wu et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- Effect of binder content on the material properties of polymethyl methacrylate fabricated by three dimensional printing technique
- (2008) P. Patirupanusara et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
- (2008) Phung Xuan Lan et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Three-Dimensional Printing in Pharmaceutics: Promises and Problems
- (2008) Deng Guang Yu et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Additive Processing of Polymers
- (2008) Bettina Wendel et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography
- (2008) Jin Woo Lee et al. MICROELECTRONIC ENGINEERING
- Formulation of lipid-based delivery systems for oral administration: Materials, methods and strategies
- (2007) Colin W. Pouton et al. ADVANCED DRUG DELIVERY REVIEWS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search