Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 16, Pages 4754
Publisher
MDPI AG
Online
2021-08-23
DOI
10.3390/ma14164754
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates
- (2021) Pengfei Yu et al. ACTA MATERIALIA
- Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth
- (2021) S. Memon et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of FSW process parameters on microstructure and mechanical properties of the dissimilar AA2024 Al alloy and 304 stainless steel joints
- (2021) Reza Jabraeili et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum
- (2021) Hao Su et al. Acta Metallurgica Sinica-English Letters
- Effects of Rapid Cooling on Properties of Aluminum-Steel Friction Stir Welded Joint
- (2021) Hamed Aghajani Derazkola et al. Materials
- Effects of materials positioning and tool rotational speed on metallurgical and mechanical properties of dissimilar modified friction stir clinching of AA5754-O and AA2024-T3 sheets
- (2021) S. Memon et al. Results in Physics
- Tool-Workpiece Stick-Slip Conditions and their Effects on Torque and Heat Generation Rate in the Friction Stir Welding
- (2021) Xue Wang et al. ACTA MATERIALIA
- Dissimilar welding of AA5083 to AZ31 Mg alloys using Modified friction stir clinching brazing
- (2021) M. Paidar et al. MATERIALS LETTERS
- Effect of Stirring Pin Rotation Speed on Microstructure and Mechanical Properties of 2A14-T4 Alloy T-Joints Produced by Stationary Shoulder Friction Stir Welding
- (2021) Haifeng Yang et al. Materials
- Underwater friction stir welding of PC: Experimental study and thermo-mechanical modelling
- (2021) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
- (2021) Hesamoddin Aghajani Derazkola et al. CIRP Journal of Manufacturing Science and Technology
- Analysis of Friction Stir Welding Tool Offset on the Bonding and Properties of Al–Mg–Si Alloy T-Joints
- (2021) Shabbir Memon et al. Materials
- The Influence of Tool Shape and Process Parameters on the Mechanical Properties of AW-3004 Aluminium Alloy Friction Stir Welded Joints
- (2021) Anna Janeczek et al. Materials
- Microstructure and Residual Stresses of AA2519 Friction Stir Welded Joints under Different Heat Treatment Conditions
- (2020) Lucjan Śnieżek et al. Materials
- Evaluation of capabilities of ultrasonic vibration on the surface, electrical and mechanical behaviours of aluminium to copper dissimilar friction stir welds
- (2020) Najib A. Muhammad et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers—State of the Art
- (2020) Francesco Lambiase et al. Materials
- Influence of tool offset on microstructure and properties of Mg/Al dissimilar alloys by friction stir welding joints at low heat input
- (2020) Yongfang Deng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface and mechanical characterization of stationary shoulder friction stir welded lap joints: experimental and numerical approach
- (2020) Gianluca Buffa et al. International Journal of Material Forming
- Strengthening mechanism of friction stir welded alpha titanium alloy specially designed T-joints
- (2020) Yu Su et al. Journal of Manufacturing Processes
- Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC)
- (2020) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy
- (2020) MohammadHosein Mirzaei et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of tool geometry in dissimilar Al-Steel Friction Stir Welding
- (2020) Pankaj Kaushik et al. Journal of Manufacturing Processes
- Acoustic induced antifriction and its effect on thermo-mechanical behavior in ultrasonic assisted friction stir welding
- (2020) Wenzhen Zhao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Friction spot extrusion welding-brazing of copper to aluminum alloy
- (2020) M. Paidar et al. MATERIALS LETTERS
- Underwater friction stir welding of Al-Mg alloy: Thermo-mechanical modeling and validation
- (2020) Pouyan Talebizadehsardari et al. Materials Today Communications
- Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
- (2019) Raju P. Mahto et al. Journal of Manufacturing Processes
- R-ALE simulation of heat transfer during friction stir welding of an AA2xxx/AA7xxx joint on a large process window
- (2019) Hugo Robe et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Main Issues in Quality of Friction Stir Welding Joints of Aluminum Alloy and Steel Sheets
- (2019) Mian Wasif Safeen et al. Metals
- A novel fed friction-stir (FFS) technology for nanocomposite joining
- (2019) Hamed Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Fully coupled thermomechanical simulation of friction stir welding of aluminum 6061-T6 alloy T-joint
- (2019) Kareem N. Salloomi Journal of Manufacturing Processes
- Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel
- (2019) Tsutomu Tanaka et al. JOURNAL OF MATERIALS SCIENCE
- Non-weld-thinning friction stir welding
- (2019) Meng Guan et al. MATERIALS LETTERS
- Study on the effects of tool tile angle, offset and plunge depth on friction stir welding of poly(methyl methacrylate) T-joint
- (2019) Arameh Eyvazian et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of Tilt Angle and Pin Depth on Dissimilar Friction Stir Lap Welded Joints of Aluminum and Steel Alloys
- (2019) Veerendra Chitturi et al. Materials
- Influence of tool thread pitch on material flow and thermal process in friction stir welding
- (2019) Z. Sun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of tool tilt angle on weld joint properties of friction stir welded AISI 316L stainless steel sheets
- (2019) S. Shashi Kumar et al. MEASUREMENT
- Numerical design of high depth-to-width ratio friction stir welding
- (2018) Yongxian Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Assessment of friction stir welding aluminium T-joints
- (2018) J.S. Jesus et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of reverse material flow on the microstructure and performance of friction stir welded T-joints of an Al-Mg alloy
- (2018) E.E. Feistauer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding
- (2018) Narges Dialami et al. Metals
- Three-dimensional numerical modeling of the friction stir welding of dissimilar steels
- (2017) C. A. Hernández et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer
- (2017) Hamed Aghajani Derazkola et al. Welding in the World
- Analysis of process parameters effects on dissimilar friction stir welding of AA1100 and A441 AISI steel
- (2015) H. A. Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Influence of welding parameters on material flow, mechanical property and intermetallic characterization of friction stir welded AA6063 to HCP copper dissimilar butt joint without offset
- (2015) T.K. BHATTACHARYA et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries
- (2015) A.F. Hasan et al. MATERIALS & DESIGN
- Study on governing parameters of thermal history during underwater friction stir welding
- (2014) Hossein Papahn et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of surfactant and graphite powder concentration on electrical discharge machining of PH17-4 stainless steel
- (2014) V. Vikram Reddy et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel
- (2013) M. Dehghani et al. MATERIALS & DESIGN
- Influences of joint geometry on defects and mechanical properties of friction stir welded AA6061-T4 T-joints
- (2013) Xiaopeng Hou et al. MATERIALS & DESIGN
- Hot deformation behavior and microstructure evolution of a stabilized high-Cr ferritic stainless steel
- (2013) S.V. Mehtonen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling and simulation on dynamic recrystallization of 30Cr2Ni4MoV rotor steel using the cellular automaton method
- (2009) Fei Chen et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Structural T-joint produced by means of friction stir welding (FSW) with filling material
- (2009) L. Donati et al. International Journal of Material Forming
- On the material flow in FSW of T-joints: Influence of geometrical and tecnological parameters
- (2008) L. Fratini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Material Flow in FSW of T-joints: Experimental and Numerical Analysis
- (2008) G. Buffa et al. International Journal of Material Forming
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started