Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
Authors
Keywords
Friction stir welding, Tool tilt angle, T-configuration joint, Al-Mg-Si alloy, Process simulation
Journal
CIRP Journal of Manufacturing Science and Technology
Volume 33, Issue -, Pages 264-276
Publisher
Elsevier BV
Online
2021-05-01
DOI
10.1016/j.cirpj.2021.03.015
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path
- (2021) Abhishek Kumar et al. CIRP Journal of Manufacturing Science and Technology
- Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum
- (2021) Hao Su et al. Acta Metallurgica Sinica-English Letters
- Effects of Rapid Cooling on Properties of Aluminum-Steel Friction Stir Welded Joint
- (2021) Hamed Aghajani Derazkola et al. Materials
- Effect of tilt angle in FSW of polycarbonate sheets in butt configuration
- (2020) F. Lambiase et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the Role of Tool Tilt Angle on Friction Stir Welding of Aluminum Matrix Composites
- (2020) Uttam Acharya et al. Silicon
- Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel
- (2020) Arameh Eyvazian et al. Journal of Materials Research and Technology-JMR&T
- Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers—State of the Art
- (2020) Francesco Lambiase et al. Materials
- T-FSW of Dissimilar Aerospace Grade Aluminium Alloys: Influence of Second Pass on Weld Defects
- (2020) Mustufa Haider Abidi et al. Metals
- Strength, failure and microstructure development for friction stir welded AA6061-T6 joints with different tool pin profiles
- (2020) Ashu Garg et al. CIRP Journal of Manufacturing Science and Technology
- Sustainability in manufacturing processes: Finding the environmental impacts of friction stir processing of pure magnesium
- (2020) Rachit Kumar Sharma et al. CIRP Journal of Manufacturing Science and Technology
- Local deformation response and failure behavior of AA6061-AA6061 and AA6061-AA7075 friction stir welds
- (2020) Harish Suthar et al. CIRP Journal of Manufacturing Science and Technology
- Monte Carlo simulation of grain refinement during friction stir processing
- (2020) F. Khodabakhshi et al. JOURNAL OF MATERIALS SCIENCE
- Strengthening mechanism of friction stir welded alpha titanium alloy specially designed T-joints
- (2020) Yu Su et al. Journal of Manufacturing Processes
- Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC)
- (2020) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Microstructure evolution and mechanical properties of double-sided friction stir welding between AA6061-T6 and AA7075-T651
- (2020) Ashu Garg et al. CIRP Journal of Manufacturing Science and Technology
- Microstructure and Tensile Strength of AA6082 T-joints by Corner Stationary Shoulder Friction Stir Welding: Effect of Tool Rotation Speed
- (2020) Shenbo Zeng et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology
- (2020) H. Aghajani Derazkola et al. POLYMER TESTING
- Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology
- (2020) H. Aghajani Derazkola et al. Journal of Manufacturing Processes
- Multilayer friction stir plug welding: A novel solid-state method to repair cracks and voids in thick aluminum plates
- (2020) Moosa Sajed et al. CIRP Journal of Manufacturing Science and Technology
- Processing and characterizations of polycarbonate/alumina nanocomposites by additive powder fed friction stir processing
- (2020) Hamed Aghajani Derazkola et al. THIN-WALLED STRUCTURES
- Underwater friction stir welding of Al-Mg alloy: Thermo-mechanical modeling and validation
- (2020) Pouyan Talebizadehsardari et al. Materials Today Communications
- Fatigue behavior of dissimilar friction stir welded T-lap joints between AA5083 and AA7075
- (2020) Hao Dinh Duong et al. INTERNATIONAL JOURNAL OF FATIGUE
- Local enhancement of the material properties of aluminium sheets by a combination of additive manufacturing and friction stir processing
- (2019) Mounarik Mondal et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A novel fed friction-stir (FFS) technology for nanocomposite joining
- (2019) Hamed Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process
- (2019) Payam Tayebi et al. CIRP Journal of Manufacturing Science and Technology
- Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy
- (2019) C. RAJENDRAN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Fully coupled thermomechanical simulation of friction stir welding of aluminum 6061-T6 alloy T-joint
- (2019) Kareem N. Salloomi Journal of Manufacturing Processes
- Friction stir welding of polycarbonate lap joints: Relationship between processing parameters and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. POLYMER TESTING
- Study on the effects of tool tile angle, offset and plunge depth on friction stir welding of poly(methyl methacrylate) T-joint
- (2019) Arameh Eyvazian et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of tool tilt angle on weld joint properties of friction stir welded AISI 316L stainless steel sheets
- (2019) S. Shashi Kumar et al. MEASUREMENT
- A new procedure for the fabrication of dissimilar joints through injection of colloidal nanoparticles during friction stir processing: Proof concept for AA6062/PMMA joints
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Modeling and experimental validation of material flow during FSW of polycarbonate
- (2019) Hamed Aghajani Derazkola et al. Materials Today Communications
- Effects of tool tilt angle on the in-process heat transfer and mass transfer during friction stir welding
- (2018) Shuai Zhang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Assessment of friction stir welding aluminium T-joints
- (2018) J.S. Jesus et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions
- (2018) Gaoqiang Chen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of reverse material flow on the microstructure and performance of friction stir welded T-joints of an Al-Mg alloy
- (2018) E.E. Feistauer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An experimental investigation of torque and force generation for varying tool tilt angles and their effects on microstructure and mechanical properties: Friction stir welding of AA 6061-T6
- (2018) Abhijit Banik et al. Journal of Manufacturing Processes
- Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets
- (2018) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- The influence of process parameters in friction stir welding of Al-Mg alloy and polycarbonate
- (2018) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study
- (2018) H. Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding
- (2018) Narges Dialami et al. Metals
- An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)
- (2018) Hamed Aghajani Derazkola et al. THIN-WALLED STRUCTURES
- Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction-stir lap-joining of aluminium-magnesium/poly-methyl-methacrylate hybrid structures: thermo-mechanical modelling and experimental feasibility study
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer
- (2017) Hamed Aghajani Derazkola et al. Welding in the World
- Finite-element analysis of the tool tilt angle effect on the formation of friction stir welds
- (2017) Ling Long et al. Journal of Manufacturing Processes
- Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium
- (2016) Majid Elyasi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction
- (2016) Yucan Zhu et al. MATERIALS & DESIGN
- Tool Geometries Optimization for Friction Stir Welding of AA6061-T6 Aluminum Alloy T-Joint Using Taguchi Method to Improve the Mechanical Behavior
- (2015) Faiz F. Mustafa et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental Study of FSW T-joints of EN-AW 6082-T6 and Their Behaviour Under Static Loads
- (2014) K. Krasnowski ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
- On the elasto-plastic buckling of Integrally Stiffened Panels (ISP) joined by Friction Stir Welding (FSW): Numerical simulation and optimization algorithms
- (2013) J.F. Caseiro et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Process parameter influence on defects and tensile properties of friction stir welded T-joints on AA6061-T4 sheets
- (2013) Lei Cui et al. MATERIALS & DESIGN
- Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding
- (2013) Yong Zhao et al. MATERIALS & DESIGN
- Force generation during friction stir welding of AA2024-T3
- (2012) D. Trimble et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Study on the Microstructures and Tensile Behaviors of Friction Stir Welded T-joints for AA6061-T4 Alloys
- (2012) G. Zhou et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- On the Critical Technological Issues of Friction Stir Welding T-Joints of Dissimilar Aluminum Alloys
- (2011) A. Astarita et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A new fixture for FSW processes of titanium alloys
- (2010) L. Fratini et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Friction model for friction stir welding process simulation: Calibrations from welding experiments
- (2009) Mohamed Assidi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigations on the Effects of the Tool Material, Geometry, and Tilt Angle on Friction Stir Welding of Pure Titanium
- (2009) K. Reshad Seighalani et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Structural T-joint produced by means of friction stir welding (FSW) with filling material
- (2009) L. Donati et al. International Journal of Material Forming
- On the thermo-mechanical loads and the resultant residual stresses in friction stir processing operations
- (2008) G. Buffa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On the material flow in FSW of T-joints: Influence of geometrical and tecnological parameters
- (2008) L. Fratini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Material Flow in FSW of T-joints: Experimental and Numerical Analysis
- (2008) G. Buffa et al. International Journal of Material Forming
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now