Finite element based simulation of tribocorrosion at the head-neck junction of hip implants
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Finite element based simulation of tribocorrosion at the head-neck junction of hip implants
Authors
Keywords
Tribocorrosion, Finite element modelling, Taperosis, Hip implants
Journal
TRIBOLOGY INTERNATIONAL
Volume -, Issue -, Pages 107284
Publisher
Elsevier BV
Online
2021-09-22
DOI
10.1016/j.triboint.2021.107284
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- The mechanics of head-neck taper junctions: What do we know from finite element analysis?
- (2021) Mohsen Feyzi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Sliding speed influence on the tribo-corrosion behaviour of Ti6Al4V alloy in simulated body fluid
- (2021) Righdan Namus et al. TRIBOLOGY INTERNATIONAL
- Effect of the frequency on fretting corrosion behavior between Alloy 690TT tube and 405 stainless steel plate in high temperature pressurized water
- (2021) Yusheng Zhang et al. TRIBOLOGY INTERNATIONAL
- Fretting crevice corrosion of 316 L stainless steel in physiological phosphate buffered saline: Load, potential and alloy counterface effects
- (2021) Sachin A. Mali et al. TRIBOLOGY INTERNATIONAL
- Correlation between the formation of tribofilm and repassivation in biomedical titanium alloys during tribocorrosion
- (2021) Yidong Xu et al. TRIBOLOGY INTERNATIONAL
- Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers
- (2020) Maren Bechstedt et al. JOURNAL OF BIOMECHANICS
- Adaptive finite element simulation of fretting wear and fatigue in a taper junction of modular hip prosthesis
- (2020) Ali Cherif Messellek et al. Journal of the Mechanical Behavior of Biomedical Materials
- In situ determinations of the wear surfaces, volumes and kinetics of repassivation: Contribution in the understanding of the tribocorrosion behaviour of a ferritic stainless steel in various pH
- (2020) V. Dalbert et al. TRIBOLOGY INTERNATIONAL
- A review on the finite element simulation of fretting wear and corrosion in the taper junction of hip replacement implants
- (2020) Mohsen Feyzi et al. COMPUTERS IN BIOLOGY AND MEDICINE
- The Influence of Assembly Force on the Material Loss at the Metallic Head-Neck Junction of Hip Implants Subjected to Cyclic Fretting Wear
- (2019) Khosro Fallahnezhad et al. Metals
- The effects of manufacturing tolerances and assembly force on the volumetric wear at the taper junction in modular total hip arthroplasty
- (2019) Thom Bitter et al. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
- Influence of flexural rigidity on micromotion at the head-stem taper interface of modular hip prostheses
- (2019) Henning Haschke et al. MEDICAL ENGINEERING & PHYSICS
- Taper fretting behavior of PEEK artificial hip joint
- (2019) Handong Xu et al. TRIBOLOGY INTERNATIONAL
- Adapter sleeves are essential for ceramic heads in hip revision surgery
- (2019) Adrian Falkenberg et al. CLINICAL BIOMECHANICS
- Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors
- (2019) Adrian Falkenberg et al. JOURNAL OF BIOMECHANICS
- Modeling tribocorrosion of passive metals – A review
- (2018) Shoufan Cao et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Development of a fretting corrosion model for metallic interfaces using adaptive finite element analysis
- (2018) Khosro Fallahnezhad et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Prediction of taper performance using quasi static FE models: The influence of loading, taper clearance and trunnion length
- (2018) Halimat Y. Raji et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Finite element wear prediction using adaptive meshing at the modular taper interface of hip implants
- (2018) Thom Bitter et al. Journal of the Mechanical Behavior of Biomedical Materials
- A finite element study on the mechanical response of the head-neck interface of hip implants under realistic forces and moments of daily activities: Part 2
- (2018) Khosro Fallahnezhad et al. Journal of the Mechanical Behavior of Biomedical Materials
- Factors influencing taper failure of modular revision hip stems
- (2018) A. Krull et al. MEDICAL ENGINEERING & PHYSICS
- Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism
- (2018) Bose Sivakumar et al. TRIBOLOGY INTERNATIONAL
- Degradation mechanisms in martensitic stainless steels: Wear, corrosion and tribocorrosion appraisal
- (2018) A. Dalmau et al. TRIBOLOGY INTERNATIONAL
- Wear model for describing the time dependence of the material degradation mechanisms of the AISI 316L in a NaCl solution
- (2018) A. Dalmau et al. WEAR
- Taper-Trunnion Interface Stress Varies Significantly with Head Size and Activity
- (2018) Timothy L. Norman et al. JOURNAL OF ARTHROPLASTY
- An intelligent system for image-based rating of corrosion severity at stem taper of retrieved hip replacement implants
- (2018) Roohollah Milimonfared et al. MEDICAL ENGINEERING & PHYSICS
- The Distribution and Severity of Corrosion Damage at Eight Distinct Zones of Metallic Femoral Stem Implants
- (2018) Roohollah Milimonfared et al. Metals
- Mechanical Stability of the Taper Connection of Large Metal Femoral Heads With Adapter Sleeves in Total Hip Arthroplasty Analyzed Using Explicit Finite Element Simulations
- (2017) Danny Vogel et al. JOURNAL OF ARTHROPLASTY
- Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation
- (2017) Ariyan Ashkanfar et al. JOURNAL OF BIOMECHANICS
- A finite element study on the mechanical response of the head-neck interface of hip implants under realistic forces and moments of daily activities: Part 1, level walking
- (2017) Hamidreza Farhoudi et al. Journal of the Mechanical Behavior of Biomedical Materials
- An adaptive finite element simulation of fretting wear damage at the head-neck taper junction of total hip replacement: The role of taper angle mismatch
- (2017) Khosro Fallahnezhad et al. Journal of the Mechanical Behavior of Biomedical Materials
- A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis
- (2017) Ariyan Ashkanfar et al. Journal of the Mechanical Behavior of Biomedical Materials
- A new finding on the in-vivo crevice corrosion damage in a CoCrMo hip implant
- (2017) Reza H. Oskouei et al. Materials Science & Engineering C-Materials for Biological Applications
- A combined experimental and finite element approach to analyse the fretting mechanism of the head–stem taper junction in total hip replacement
- (2017) Thom Bitter et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Trunnionosis: Does Head Size Affect Fretting and Corrosion in Total Hip Arthroplasty?
- (2016) Christopher Del Balso et al. JOURNAL OF ARTHROPLASTY
- Influence of geometry and materials on the axial and torsional strength of the head–neck taper junction in modular hip replacements: A finite element study
- (2016) Khosro Fallahnezhad et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of different assembly loads on taper junction fretting wear in total hip replacements
- (2016) Russell English et al. TRIBOLOGY INTERNATIONAL
- Assessment of a recent tribocorrosion model for wear of metal-on-metal hip joints: Comparison between model predictions and simulator results
- (2016) Shoufan Cao et al. WEAR
- Trunnion–Head Stresses in THA: Are Big Heads Trouble?
- (2015) Carlos J. Lavernia et al. JOURNAL OF ARTHROPLASTY
- Finite element analysis of the head–neck taper interface of modular hip prostheses
- (2015) R.M.R. Dyrkacz et al. TRIBOLOGY INTERNATIONAL
- A computational approach to fretting wear prediction at the head–stem taper junction of total hip replacements
- (2015) Russell English et al. WEAR
- Tribocorrosion of passive metals in the mixed lubrication regime: theoretical model and application to metal-on-metal artificial hip joints
- (2015) Shoufan Cao et al. WEAR
- Taperosis
- (2015) C. Del Balso et al. Bone & Joint Journal
- Total hip arthroplasty head–neck contact mechanics: A stochastic investigation of key parameters
- (2014) Finn E. Donaldson et al. JOURNAL OF BIOMECHANICS
- Effect of neck length on third-generation ceramic head failure; finite element and retrieval analysis
- (2014) Young-Kyun Lee et al. JOURNAL OF ORTHOPAEDIC SCIENCE
- Stability and Trunnion Wear Potential in Large-diameter Metal-on-Metal Total Hips: A Finite Element Analysis
- (2013) Jacob M. Elkins et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study
- (2013) Steven M. Kurtz et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- The Influence of Head Size on Corrosion and Fretting Behaviour at the Head-Neck Interface of Artificial Hip Joints
- (2013) Richard M.R. Dyrkacz et al. JOURNAL OF ARTHROPLASTY
- Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices?
- (2013) Genymphas B. Higgs et al. JOURNAL OF ARTHROPLASTY
- Micro–macro wear–fatigue of modular hip implant taper-lock coupling
- (2013) Teng Zhang et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Why does titanium alloy wear cobalt chrome alloy despite lower bulk hardness: A nanoindentation study?
- (2013) N. Moharrami et al. THIN SOLID FILMS
- A finite element methodology for wear–fatigue analysis for modular hip implants
- (2013) T. Zhang et al. TRIBOLOGY INTERNATIONAL
- Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy
- (2013) Sandra Guadalupe Maldonado et al. WEAR
- Fretting corrosion of CoCrMo and Ti6Al4V interfaces
- (2012) Viswanathan Swaminathan et al. BIOMATERIALS
- Corrosion at the Cone/Taper Interface Leads to Failure of Large-diameter Metal-on-metal Total Hip Arthroplasties
- (2012) Heiko Meyer et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Accelerating failure rate of the ASR total hip replacement
- (2011) D. J. Langton et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Tribocorrosion modeling of stainless steel in a sliding pair of pin-on-plate type
- (2011) Arkadiusz Stachowiak et al. TRIBOLOGY INTERNATIONAL
- Optimization of the stress distribution in ceramic femoral heads by means of finite element methods
- (2008) C Affolter et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started