The effects of manufacturing tolerances and assembly force on the volumetric wear at the taper junction in modular total hip arthroplasty

The Influence of Assembly Force on the Material Loss at the Metallic Head-Neck Junction of Hip Implants Subjected to Cyclic Fretting Wear

(2019) Khosro Fallahnezhad et al.   Metals

Development of a fretting corrosion model for metallic interfaces using adaptive finite element analysis

(2018) Khosro Fallahnezhad et al.   FINITE ELEMENTS IN ANALYSIS AND DESIGN

Finite element wear prediction using adaptive meshing at the modular taper interface of hip implants

(2018) Thom Bitter et al.   Journal of the Mechanical Behavior of Biomedical Materials

Same Same but Different? 12/14 Stem and Head Tapers in Total Hip Arthroplasty

(2017) Ulrike Mueller et al.   JOURNAL OF ARTHROPLASTY

Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation

(2017) Ariyan Ashkanfar et al.   JOURNAL OF BIOMECHANICS

An adaptive finite element simulation of fretting wear damage at the head-neck taper junction of total hip replacement: The role of taper angle mismatch

(2017) Khosro Fallahnezhad et al.   Journal of the Mechanical Behavior of Biomedical Materials

A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis

(2017) Ariyan Ashkanfar et al.   Journal of the Mechanical Behavior of Biomedical Materials

Experimental Measurement of the Static Coefficient of Friction at the Ti–Ti Taper Connection in Total Hip Arthroplasty

(2016) T. Bitter et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Influence of geometry and materials on the axial and torsional strength of the head–neck taper junction in modular hip replacements: A finite element study

(2016) Khosro Fallahnezhad et al.   Journal of the Mechanical Behavior of Biomedical Materials

Basic Principles and Uniform Terminology for the Head-Neck Junction in Hip Replacement

(2015) Paul H. Werner et al.   Hip International

Trunnion–Head Stresses in THA: Are Big Heads Trouble?

(2015) Carlos J. Lavernia et al.   JOURNAL OF ARTHROPLASTY

Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system

(2015) Timothy M. Brock et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Finite element analysis of the head–neck taper interface of modular hip prostheses

(2015) R.M.R. Dyrkacz et al.   TRIBOLOGY INTERNATIONAL

Total hip arthroplasty head–neck contact mechanics: A stochastic investigation of key parameters

(2014) Finn E. Donaldson et al.   JOURNAL OF BIOMECHANICS

Stability and Trunnion Wear Potential in Large-diameter Metal-on-Metal Total Hips: A Finite Element Analysis

(2013) Jacob M. Elkins et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements

(2013) Nader A. Nassif et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices?

(2013) Genymphas B. Higgs et al.   JOURNAL OF ARTHROPLASTY

Taper junction failure in large-diameter metal-on-metal bearings

(2013) D. J. Langton et al.   Bone & Joint Research

Mixing and matching causing taper wear

(2012) R. Chana et al.   JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME

Modularity of the Femoral Component in Total Hip Arthroplasty

(2012) Anand Srinivasan et al.   JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS

Influence of assembly procedure and material combination on the strength of the taper connection at the head–neck junction of modular hip endoprostheses

(2011) Annelie Rehmer et al.   CLINICAL BIOMECHANICS

Metal-on-metal bearings total hip arthroplasty: The cobalt and chromium ions release concern

(2010) C. Delaunay et al.   Orthopaedics & Traumatology-Surgery & Research