Laser hybridizing with micro-milling for fabrication of high aspect ratio micro-groove on oxygen-free copper

Investigation on surface quality and burr generation of high aspect ratio (HAR) micro-milled grooves

(2020) Jinjin Han et al.   Journal of Manufacturing Processes

Advances in micro milling: From tool fabrication to process outcomes

(2020) Ni Chen et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Fabrication of deep-narrow microgrooves by micro-EDM using rotary dentate disc foil electrodes in emulsion

(2019) Wen Wu et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Graphene-Based Materials toward Microwave and Terahertz Absorbing Stealth Technologies

(2019) Honghui Chen et al.   Advanced Optical Materials

The Effect of Cutting Parameters on Micro-hardness and the Prediction of Vickers Hardness Based on a Response Surface Methodology for Micro-milling Inconel 718

(2019) Xiaohong Lu et al.   MEASUREMENT

Electrical discharge machining of micro grooves using laminated disc electrodes made of Cu and Sn foils

(2019) Jianguo Lei et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fabrication of high aspect ratio microgroove on Ti6Al4V by laser-induced oxidation assisted micro milling

(2019) Hongjun Xia et al.   Journal of Manufacturing Processes

Statistical characterization and analysis of low-THz communication channel for 5G Internet of Things

(2019) Nabil Khalid et al.   Nano Communication Networks

Experimental research on process stability in pulsed electrochemical machining of deep narrow grooves with high length-width ratio

(2018) Jianshe Zhao et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Laser micro-milling of bio-lox forte ceramic: An experimental analysis

(2018) Basem M.A. Abdo et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Investigation on mass transfer and dissolution localization of wire electrochemical machining using vibratory ribbed wire tools

(2018) Xianghe Zou et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Continuous-wave Y-band planar BWO with wide tunable bandwidth

(2018) Hongzhu Xi et al.   Scientific Reports

Fabrication of a Micro-Lens Array Mold by Micro Ball End-Milling and Its Hot Embossing

(2018) Peng Gao et al.   Micromachines

Advanced GPU-Based Terahertz Approach for In-Line Multilayer Thickness Measurements

(2017) Soufiene Krimi et al.   IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS

Direct Measurements of Terahertz Meta-atoms with Near-Field Emission of Terahertz Waves

(2017) Kazunori Serita et al.   Journal of Infrared Millimeter and Terahertz Waves

100 GHz waveguide band-pass filter employing UV-LIGA micromachining process

(2017) Wang Xin et al.   MICROELECTRONICS JOURNAL

Laser beam steering approaches for microstructuring of copper layers

(2017) Jaka Mur et al.   OPTICS AND LASER TECHNOLOGY

Investigation on the burr formation mechanism in micro cutting

(2017) Xian Wu et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining

(2016) Xiangyang Dong et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Cutting forces in micro-end-milling processes

(2016) Xuewei Zhang et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

UV-LIGA microfabrication process for sub-terahertz waveguides utilizing multiple layered SU-8 photoresist

(2016) Ali Malekabadi et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Experimental Throughput Analysis of Low-THz MIMO Communication Channel in 5G Wireless Networks

(2016) Nabil Khalid et al.   IEEE Wireless Communications Letters

1 THz Micromachined Waveguide Band-Pass Filter

(2015) Shuang Liu et al.   Journal of Infrared Millimeter and Terahertz Waves

Hybrid micro-machining processes: A review

(2015) Saeed Zare Chavoshi et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Terahertz Conductivity of Copper Surfaces

(2015) M. P. Kirley et al.   IEEE Transactions on Terahertz Science and Technology

Demonstration of a High Power, Wideband 220-GHz Traveling Wave Amplifier Fabricated by UV-LIGA

(2014) Colin D. Joye et al.   IEEE TRANSACTIONS ON ELECTRON DEVICES

Theoretical and Empirical Evaluation of Surface Roughness Effects on Conductivity in the Terahertz Regime

(2014) Benjamin B. Yang et al.   IEEE Transactions on Terahertz Science and Technology

Theoretical analysis of THz Sommerfeld wave propagation on metal wire at normal temperature

(2013) Zhihui Wang   OPTIK

A study on the quality of micro-machined surfaces on tungsten carbide generated by PCD micro end-milling

(2012) Kazuo Nakamoto et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Effects of micro-milling conditions on the cutting forces and process stability

(2012) S.M. Afazov et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

State of the Art on Micromilling of Materials, a Review

(2012) M.A. Câmara et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Process capability study of laser assisted micro milling of a hard-to-machine material

(2011) Mukund Kumar et al.   Journal of Manufacturing Processes