A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression

(2018) Jan Philipp Liebig et al.   ACTA MATERIALIA

Constitutive modeling of Ti-6Al-4V at a wide range of temperatures and strain rates

(2017) A. Tabei et al.   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS

On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model

(2017) F. Ducobu et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment

(2017) A. Iturbe et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experimental study and empirical analysis on effect of ultrasonic vibration during rotary turning of aluminum 7075 aerospace alloy

(2017) Reza Teimouri et al.   Journal of Manufacturing Processes

Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy

(2017) Walid Jomaa et al.   Journal of Manufacturing Processes

Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy

(2017) Bing Wang et al.   Journal of Manufacturing Processes

Verification of dynamic flow stress obtained using split Hopkinson pressure test bar with high-speed forming process

(2016) Hak-Gon Noh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Dynamic Recrystallization of Al Alloy 7075 in Turning

(2016) A. Tabei et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Modeling of flow behavior for 7050-T7451 aluminum alloy considering microstructural evolution over a wide range of strain rates

(2016) Guang Chen et al.   MECHANICS OF MATERIALS

Sensitivity analysis of material input data influence on machining induced residual stress prediction in Inconel 718

(2016) Aitor Kortabarria et al.   SIMULATION MODELLING PRACTICE AND THEORY

Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V

(2016) Bing Wang et al.   MATERIALS & DESIGN

Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining

(2015) Bing Wang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

A modified Johnson–Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy

(2015) Ding-Ni Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool

(2015) M. S. Najiha et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Brittle Removal Mechanism of Ductile Materials With Ultrahigh-Speed Machining

(2015) Bing Wang et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V

(2015) Bing Wang et al.   SIMULATION MODELLING PRACTICE AND THEORY

Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V

(2014) Bing Wang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

A physical-based constitutive relation to predict flow stress for Cu–0.4Mg alloy during hot working

(2014) Guoliang Ji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Constitutive flow stress formulation, model validation and FE cutting simulation for AA7075-T6 aluminum alloy

(2014) Uma Maheshwera Reddy Paturi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation induced anisotropic responses of Ti–6Al–4V alloy. Part I: Experiments

(2012) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Thermomechanical behavior and constitutive modeling of tungsten-based composite over wide temperature and strain rate ranges

(2012) Zejian Xu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain

(2012) Jiang Li et al.   MATERIALS & DESIGN

The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy

(2012) B. Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experimental studies and constitutive modelling of the hardening of aluminium alloy 7055 under creep age forming conditions

(2011) Lihua Zhan et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Constitutive base analysis of a 7075 aluminum alloy during hot compression testing

(2011) M.R. Rokni et al.   MATERIALS & DESIGN

The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain

(2011) N. Haghdadi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experimental analysis and constitutive modeling for the newly developed 2139-T8 alloy

(2009) M. Vural et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experiments on stress-triaxiality dependence of material behavior of aluminum alloys

(2009) Larissa Driemeier et al.   MECHANICS OF MATERIALS

A critical assessment of high-temperature dynamic mechanical testing of metals

(2008) Yulong Li et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V

(2007) Madalina Calamaz et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE