Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review study
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review study
Authors
Keywords
Composite materials, Fiber-reinforced polymer, Composite technologies, Automobile industry, Composite structures
Journal
COMPOSITE STRUCTURES
Volume 266, Issue -, Pages 113864
Publisher
Elsevier BV
Online
2021-03-19
DOI
10.1016/j.compstruct.2021.113864
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Design and manufacture of automotive composite front bumper assemble component considering interfacial bond characteristics between over-molded chopped glass fiber polypropylene and continuous glass fiber polypropylene composite
- (2020) Sung-Jun Joo et al. COMPOSITE STRUCTURES
- Enhanced Surface Properties of Carbon Fiber Reinforced Plastic by Epoxy Modified Primer with Plasma for Automotive Applications
- (2020) Kyeng-Bo Sim et al. Polymers
- Void‐Free Layered Polymeric Architectures via Capillary‐Action of Nanoporous Films
- (2020) Jeonyoon Lee et al. Advanced Materials Interfaces
- Assessment of Long Fiber Spray-up Molding of Chopped Glass Fiber Reinforced Polydicyclopentadiene Composites
- (2020) Ji Ho Jeon et al. FIBERS AND POLYMERS
- A numerical modelling for resin transfer molding (RTM) process and effective thermal conductivity prediction of a particle–filled composite carbon–epoxy
- (2020) Y Djebara et al. JOURNAL OF COMPOSITE MATERIALS
- Experimental and Numerical Impact Analysis of Automotive Bumper Brackets Made of 2D Triaxially Braided CFRP Composites
- (2020) Robert Böhm et al. Materials
- Multi-scale modeling of distortion in the non-flat 3D woven composite part manufactured using Resin Transfer Molding
- (2020) Anton Trofimov et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Real time uncertainty estimation in filling stage of resin transfer molding process
- (2020) K. I. Tifkitsis et al. POLYMER COMPOSITES
- A Review of Thermoplastic Resin Transfer Molding: Process Modeling and Simulation
- (2019) Ageyeva et al. Polymers
- Confusion about infusion: An overview of infusion processes
- (2019) Arne Hindersmann COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Investigations on a material-specific joining technology for CFRP hybrid joints along the automotive process chain
- (2019) Julian Vorderbrüggen et al. COMPOSITE STRUCTURES
- Investigations of FeCl3 adducted N-heterocyclic carbene complex as curing-delayed action catalyst for polyurethane polymerization
- (2019) Hyeon-Jun Noh et al. JOURNAL OF CATALYSIS
- The Effect of the Parameters of T-RTM on the Properties of Polyamide 6 Prepared by in Situ Polymerization
- (2019) Orsolya Viktória Semperger et al. Materials
- Development of full carbon wheels for sport cars with high-volume technology
- (2018) Francesco Rondina et al. COMPOSITE STRUCTURES
- Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing
- (2018) Maria Benavente et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Overview of automotive structural composites technology developments in Japan
- (2018) Takashi Ishikawa et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of Multiwalled Carbon Nanotubes on the Mechanical Properties of Carbon Fiber-Reinforced Polyamide-6/Polypropylene Composites for Lightweight Automotive Parts
- (2018) Huu-Duc Nguyen-Tran et al. Materials
- Polymers and Related Composites via Anionic Ring-Opening Polymerization of Lactams: Recent Developments and Future Trends
- (2018) Tatyana Ageyeva et al. Polymers
- Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance
- (2018) Mahoor Mehdikhani et al. JOURNAL OF COMPOSITE MATERIALS
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Adhesive joints using aluminium and CFRP substrates tested at low and high temperatures under quasi-static and impact conditions for the automotive industry
- (2018) J.J.M. Machado et al. COMPOSITES PART B-ENGINEERING
- The effect of voids on the quasi-static tensile properties of carbon fiber/polymer-laminated composites
- (2017) Haolong Liu et al. JOURNAL OF COMPOSITE MATERIALS
- Numerical modeling of vacuum-assisted resin transfer molding using multilayer approach
- (2017) Raounak Loudad et al. JOURNAL OF COMPOSITE MATERIALS
- Influence of void content on the flexural fracture behaviour of carbon fiber reinforced polypropylene
- (2017) Takahiro Hayashi et al. JOURNAL OF COMPOSITE MATERIALS
- Design and manufacturing of automobile hood using natural composite structure
- (2016) Changduk Kong et al. COMPOSITES PART B-ENGINEERING
- Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization
- (2016) E. Guzman-Maldonado et al. MATERIALS & DESIGN
- Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite
- (2015) Ching Kuan Yong et al. BioResources
- Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle
- (2015) Do-Hyoung Kim et al. COMPOSITE STRUCTURES
- Study on high-speed RTM to reduce the impregnation time of carbon/epoxy composites
- (2015) Song Hee Han et al. COMPOSITE STRUCTURES
- Experimental study of defect formation during processing of randomly-oriented strand carbon/PEEK composites
- (2015) Benoit Landry et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Synthesis of Polyurethanes Using Organocatalysis: A Perspective
- (2015) Haritz Sardon et al. MACROMOLECULES
- Automation of the vacuum assisted resin transfer molding process for recreational composite yachts
- (2015) Sam Swan et al. POLYMER COMPOSITES
- Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
- (2015) Géraldine Oliveux et al. PROGRESS IN MATERIALS SCIENCE
- Carbon Fiber Reinforced Polymer for Cable Structures—A Review
- (2015) Yue Liu et al. Polymers
- Lignin – an alternative precursor for sustainable and cost-effective automotive carbon fiber
- (2015) Hendrik Mainka et al. Journal of Materials Research and Technology-JMR&T
- Modeling of post-filling stage in vacuum infusion using compaction characterization
- (2014) Baris Caglar et al. JOURNAL OF COMPOSITE MATERIALS
- Effect of part thickness variation on the mold filling time in vacuum infusion process
- (2014) M Akif Yalcinkaya et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Modeling the resin flow and numerical simulation of the filling stage for vacuum-assisted resin infusion process
- (2014) Bo Yang et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Study on structural design and analysis of flax natural fiber composite tank manufactured by vacuum assisted resin transfer molding
- (2014) Changduk Kong et al. MATERIALS LETTERS
- Reduction of void content of vacuum-assisted resin transfer molded composites by infusion pressure control
- (2014) Dingding Chen et al. POLYMER COMPOSITES
- Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
- (2013) S. Hernández et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Novel approach for mold filling simulation of the processing of natural fiber reinforced composites by resin transfer molding
- (2013) Gastón Francucci et al. JOURNAL OF COMPOSITE MATERIALS
- Effect of rapid curing process on the properties of carbon fiber/epoxy composite fabricated using vacuum assisted resin infusion molding
- (2013) Kaomin Zhang et al. MATERIALS & DESIGN
- Cost-effective manufacturing process for the development of automotive from energy efficient composite materials and sandwich structures
- (2013) Laraib Alam Khan et al. POLYMER COMPOSITES
- Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications
- (2012) Klaus Friedrich et al. APPLIED COMPOSITE MATERIALS
- Modeling and simulation of voids and saturation in liquid composite molding processes
- (2011) Chung Hae Park et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental validation of post-filling flow in vacuum assisted resin transfer molding processes
- (2011) Pavel Simacek et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Laminate thickness and resin pressure evolution during axisymmetric liquid composite moulding with flexible tooling
- (2011) J. Timms et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Prediction and experimental verification of normal stress distributions on mould tools during Liquid Composite Moulding
- (2011) W.A. Walbran et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Impact behavior of carbon fiber/epoxy composite manufactured by vacuum-assisted compression resin transfer molding
- (2011) J. Aurrekoetxea et al. JOURNAL OF COMPOSITE MATERIALS
- Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review
- (2011) Chung Hae Park et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Effect of fiber loading and orientation on mechanical and erosion wear behaviors of glass-epoxy composites
- (2011) Sandhyarani Biswas et al. POLYMER COMPOSITES
- Void formation in composite prepregs – Effect of dissolved moisture
- (2010) L.K. Grunenfelder et al. COMPOSITES SCIENCE AND TECHNOLOGY
- An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft
- (2010) M.A. Badie et al. MATERIALS & DESIGN
- Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft
- (2009) A.R. Abu Talib et al. MATERIALS & DESIGN
- Effect of fiber angle orientation and stacking sequence on mixed mode fracture toughness of carbon fiber reinforced plastics: Numerical and experimental investigations
- (2009) P. Naghipour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Porosity reduction using optimized flow velocity in Resin Transfer Molding
- (2008) Jean Sébastien Leclerc et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Textile fiber-reinforced anionic polyamide-6 composites. Part I: The vacuum infusion process
- (2008) K. van Rijswijk et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Strategic materials selection in the automobile body: Economic opportunities for polymer composite design
- (2008) E FUCHS et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Variation of part thickness and compaction pressure in vacuum infusion process
- (2008) Bekir Yenilmez et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Modeling Flow in Compression Resin Transfer Molding for Manufacturing of Complex Lightweight High-Performance Automotive Parts
- (2008) Pavel Simacek et al. JOURNAL OF COMPOSITE MATERIALS
- Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
- (2007) V.N. Gaitonde et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now