Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance

Fatigue behaviour of glass/epoxy laminates in the presence of voids

(2017) L. Maragoni et al.   INTERNATIONAL JOURNAL OF FATIGUE

Comparison of methods for the characterization of voids in glass fiber composites

(2017) Nisrin Abdelal et al.   JOURNAL OF COMPOSITE MATERIALS

Influence of void content on the flexural fracture behaviour of carbon fiber reinforced polypropylene

(2017) Takahiro Hayashi et al.   JOURNAL OF COMPOSITE MATERIALS

Magnet assisted composite manufacturing: A novel fabrication technique for high-quality composite laminates

(2017) Maya Pishvar et al.   POLYMER COMPOSITES

Microscopic observation of voids and transverse crack initiation in CFRP laminates

(2016) Shigeki Aratama et al.   ADVANCED COMPOSITE MATERIALS

A two-scale method for predicting the mechanical properties of 3D braided composites with internal defects

(2016) Jiwei Dong et al.   COMPOSITE STRUCTURES

Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids

(2016) Nina Graupner et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of voids on the crack formation in a [45/−45/0]s laminate under cyclic axial tension

(2016) L. Maragoni et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Improved simplified approach for the prediction of porosity growth during the curing of composites parts

(2016) B. de Parscau du Plessix et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Experimental characterization of voids in high fibre volume fraction composites processed by high injection pressure RTM

(2016) M. Bodaghi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The effect of resonance on the void content in CFRP tubes

(2016) A. Kitselis et al.   COMPOSITES PART B-ENGINEERING

A numerical methodology for simulating the mechanical behavior of CFRP laminates containing pores using X-ray computed tomography data

(2016) K.I. Tserpes et al.   COMPOSITES PART B-ENGINEERING

High-resolution computed tomography in resin infused woven carbon fibre composites with voids

(2016) S.M. Sisodia et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Towards void formation and permeability predictions in LCM processes: A computational bifluid–solid mechanics framework dealing with capillarity and wetting issues

(2016) Yujie Liu et al.   COMPTES RENDUS MECANIQUE

Boundary element simulation of void formation in fibrous reinforcements based on the Stokes–Darcy formulation

(2016) Iván David Patiño Arcila et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Analytical prediction of void distribution and a minimum-void angle in anisotropic fabrics for radial injection resin transfer molding

(2016) R. Matsuzaki et al.   Express Polymer Letters

Micromechanical modeling of 8-harness satin weave glass fiber-reinforced composites

(2016) RS Choudhry et al.   JOURNAL OF COMPOSITE MATERIALS

An experimental technique to characterize interply void formation in unidirectional prepregs

(2016) Rhena Helmus et al.   JOURNAL OF COMPOSITE MATERIALS

Hierarchical analysis of the degradation of fibre-reinforced polymers under the presence of void imperfections

(2016) Wilfried V. Liebig et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Application of air-coupled ultrasonics for the characterization of polymer and polymer-matrix composite samples

(2016) Juerg Neuenschwander et al.   POLYMER TESTING

Imaging of local porosity/voids using a fully non-contact air-coupled transducer and laser Doppler vibrometer system

(2016) Tyler B Hudson et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Finite element analysis and microscopy of natural fiber composites containing microcellular voids

(2016) William T. Kern et al.   MATERIALS & DESIGN

Micro-computed tomography analysis of tubular braided composites

(2015) Garrett W. Melenka et al.   COMPOSITE STRUCTURES

The influence of manufacturing variances on the progressive failure of filament wound cylindrical pressure vessels

(2015) Brian Ellul et al.   COMPOSITE STRUCTURES

A micromechanical study of porous composites under longitudinal shear and transverse normal loading

(2015) Danial Ashouri Vajari   COMPOSITE STRUCTURES

A review of out-of-autoclave prepregs – Material properties, process phenomena, and manufacturing considerations

(2015) T. Centea et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Influence of fabric shear and flow direction on void formation during resin transfer molding

(2015) Bo Yang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Quantification of the internal structure and automatic generation of voxel models of textile composites from X-ray computed tomography data

(2015) Ilya Straumit et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A stochastic approach to model material variation determining tow impregnation in out-of-autoclave prepreg consolidation

(2015) R. Helmus et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Rapidly cured out-of-autoclave laminates: Understanding and controlling the effect of voids on laminate fracture toughness

(2015) S.L. Agius et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites

(2015) Yan Li et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Imaging of porosity in fiber-reinforced composites with a fiber-optic pump–probe laser-ultrasound system

(2015) Ivan Pelivanov et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mechanical characterisation of carbon fibre–PEEK manufactured by laser-assisted automated-tape-placement and autoclave

(2015) A.J. Comer et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Determining the effect of voids in GFRP on the damage behaviour under compression loading using acoustic emission

(2015) N. Kosmann et al.   COMPOSITES PART B-ENGINEERING

Cure cycle effect on impact resistance under elevated temperatures in carbon prepreg laminates investigated using acoustic emission

(2015) J. Kakakasery et al.   COMPOSITES PART B-ENGINEERING

Voids and their effect on the strain rate dependent material properties and fatigue behaviour of non-crimp fabric composites materials

(2015) R. Protz et al.   COMPOSITES PART B-ENGINEERING

An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography

(2015) Joaquim Vilà et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Influence of voids on the compressive failure behaviour of fibre-reinforced composites

(2015) Wilfried V. Liebig et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Analytical prediction of void formation in geometrically anisotropic woven fabrics during resin transfer molding

(2015) Ryosuke Matuzaki et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Defect controlled transverse compressive strength of polyethylene fiber laminates

(2015) M.R. O’Masta et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing

(2015) AG Stamopoulos et al.   JOURNAL OF COMPOSITE MATERIALS

Mechanical characteristics and strengthening effectiveness of random-chopped FRP composites containing air voids

(2014) B.J. Yang et al.   COMPOSITES PART B-ENGINEERING

Effect of dual scale porosity on the overall permeability of fibrous structures

(2014) Mohammad Waseem Tahir et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography

(2014) C. Ravey et al.   COMPOSITES SCIENCE AND TECHNOLOGY

X-ray microtomography applications for quantitative and qualitative analysis of porosity in woven glass fiber reinforced thermoplastic

(2014) Anna Madra et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Statistical methodology for assessing manufacturing quality related to transverse cracking in cross ply laminates

(2014) Yongxin Huang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites

(2014) Danial Ashouri Vajari et al.   COMPOSITES SCIENCE AND TECHNOLOGY

The influence of cure pressure on microstructure, temperature field and mechanical properties of advanced polymer-matrix composite laminates

(2014) S. J. Li et al.   FIBERS AND POLYMERS

A model of two-phase resin and void flow during composites processing

(2014) John J. Gangloff et al.   INTERNATIONAL JOURNAL OF MULTIPHASE FLOW

Influence of void microstructure on the effective elastic properties of discontinuous fiber-reinforced composites

(2014) G Srinivasulu et al.   JOURNAL OF COMPOSITE MATERIALS

Influence of fibre misalignment and voids on composite laminate strength

(2014) BN Fedulov et al.   JOURNAL OF COMPOSITE MATERIALS

Effects of voids on quasi-static and tension fatigue behaviour of carbon-fibre composite laminates

(2014) Sanjay Sisodia et al.   JOURNAL OF COMPOSITE MATERIALS

Reduction of void content of vacuum-assisted resin transfer molded composites by infusion pressure control

(2014) Dingding Chen et al.   POLYMER COMPOSITES

Formation of voids in composite laminates: Coupled effect of moisture content and processing pressure

(2014) J.P. Anderson et al.   POLYMER COMPOSITES

Research on the mechanical properties prediction of carbon/epoxy composite laminates with different void contents

(2014) Aying Zhang et al.   POLYMER COMPOSITES

Review of air-coupled ultrasonic materials characterization

(2014) D.E. Chimenti   ULTRASONICS

Pitfalls in the experimental recording of ultrasonic (backscatter) polar scans for material characterization

(2014) Mathias Kersemans et al.   ULTRASONICS

Flash Thermography to Evaluate Porosity in Carbon Fiber Reinforced Polymer (CFRPs)

(2014) Carosena Meola et al.   Materials

An FEM Analysis with Consideration of Random Void Defects for Predicting the Mechanical Properties of 3D Braided Composites

(2014) Kun Xu et al.   Advances in Materials Science and Engineering

The influence of porosity on ultrasound attenuation in carbon fiber reinforced plastic composites using the laser-ultrasound spectroscopy

(2013) A. A. Karabutov et al.   ACOUSTICAL PHYSICS

Analytical modeling andin situmeasurement of void formation in liquid composite molding processes

(2013) Sébastien Gueroult et al.   ADVANCED COMPOSITE MATERIALS

In situ void content measurements during resin transfer molding

(2013) Ryosuke Matsuzaki et al.   ADVANCED COMPOSITE MATERIALS

Void formation in geometry–anisotropic woven fabrics in resin transfer molding

(2013) Ryosuke Matsuzaki et al.   ADVANCED COMPOSITE MATERIALS

Simulation of void formation in liquid composite molding processes

(2013) C. DeValve et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Quantitative analysis of the influence of voids and delaminations on acoustic attenuation in CFRP composites by the laser-ultrasonic spectroscopy method

(2013) A.A. Karabutov et al.   COMPOSITES PART B-ENGINEERING

A mesoscale ultrasonic attenuation finite element model of composites with random-distributed voids

(2013) Yalin Yu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Photoelastic study of stresses in the vicinity of a unique void in a fibre-reinforced model composite under compression

(2013) W.V. Liebig et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effects of defects on interlaminar tensile fatigue behavior of carbon/epoxy composites

(2013) Guillaume Seon et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties

(2013) S. Hernández et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Measurement of voids in composites by X-ray Computed Tomography

(2013) Yuri Nikishkov et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Influence of voids on damage mechanisms in carbon/epoxy composites determined via high resolution computed tomography

(2013) A.E. Scott et al.   COMPOSITES SCIENCE AND TECHNOLOGY

A virtual frame work for predication of effect of voids on transverse elasticity of a unidirectionally reinforced composite

(2013) H. Nikopour   COMPUTATIONAL MATERIALS SCIENCE

Effects of voids on postbuckling delamination growth in unidirectional composites

(2013) Linqi Zhuang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Structural analysis of composites with porosity defects based on X-ray computed tomography

(2013) Yuri Nikishkov et al.   JOURNAL OF COMPOSITE MATERIALS

Out-of-autoclave prepreg consolidation under deficient pressure conditions

(2013) T Centea et al.   JOURNAL OF COMPOSITE MATERIALS

Studies on the failure analysis of composite materials with manufacturing defects

(2013) R. Talreja   MECHANICS OF COMPOSITE MATERIALS

Porosity Content Evaluation in Carbon-Fiber/Epoxy Composites Using X-ray Computed Tomography

(2013) Peng Yang et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs

(2012) T. Centea et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring

(2012) C. Garschke et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A non-local void filling model to describe its dynamics during processing thermoplastic composites

(2012) Pavel Simacek et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg

(2012) L.K. Grunenfelder et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Cure behaviour and void development within rapidly cured out-of-autoclave composites

(2012) S.L. Agius et al.   COMPOSITES PART B-ENGINEERING

A concept for the in situ consolidation of thermoset matrix prepreg during automated lay-up

(2012) Dirk H.-J.A. Lukaszewicz et al.   COMPOSITES PART B-ENGINEERING

Multiaxial fatigue behaviour of GFRP with evenly distributed or accumulated voids monitored by various NDT methodologies

(2012) F. Schmidt et al.   INTERNATIONAL JOURNAL OF FATIGUE

Laser Based Nondestructive Inspection Techniques

(2012) J. Gryzagoridis   JOURNAL OF NONDESTRUCTIVE EVALUATION

The Use of Infrared Thermography in Detecting the Defects in Kenaf-Poly Urethane Composites

(2012) Zahra Dashtizadeh et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Porosity Defect Morphology Effects in Carbon Fiber – Epoxy Composites

(2012) Peng Yang et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements

(2012) François LeBel et al.   International Journal of Material Forming

Modeling and simulation of voids and saturation in liquid composite molding processes

(2011) Chung Hae Park et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The engineering aspects of automated prepreg layup: History, present and future

(2011) Dirk H.-J.A. Lukaszewicz et al.   COMPOSITES PART B-ENGINEERING

Compressive failure of UD-CFRP containing void defects: In situ SEM microanalysis

(2011) Julia Hapke et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites

(2011) S. Hernández et al.   COMPOSITES SCIENCE AND TECHNOLOGY

3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials

(2011) J. Lambert et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Qualitative separation of the effect of voids on the static mechanical properties of hygrothermally conditioned carbon/epoxy composites

(2011) A. Y. Zhang et al.   Express Polymer Letters

Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy composite

(2011) Hoda Koushyar et al.   JOURNAL OF COMPOSITE MATERIALS

Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/e-glass fiber composites manufactured with VARTM process

(2011) Vishwanath R. Kedari et al.   JOURNAL OF COMPOSITE MATERIALS

Influence of Voids on the Tensile Performance of Carbon/epoxy Fabric Laminates

(2011) Hongyan Zhu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review

(2011) Chung Hae Park et al.   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

Material strength knock-down resulting from multiple randomly positioned voids

(2011) Alison J. McMillan   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

Characterisation of voids in fibre reinforced composite materials

(2011) John Eric Little et al.   NDT & E INTERNATIONAL

Manipulation of confined bubbles in a thin microchannel: Drag and acoustic Bjerknes forces

(2011) David Rabaud et al.   PHYSICS OF FLUIDS

A novel random void model and its application in predicting void content of composites based on ultrasonic attenuation coefficient

(2010) Li Lin et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

The internal structure and conformation of prepreg with respect to reliable automated processing

(2010) D.H.-J.A. Lukaszewicz et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

On the void reduction mechanisms in vibration assisted consolidation of fibre reinforced polymer composites

(2010) J. Muric-Nesic et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Coupled visco-mechanical and diffusion void growth modelling during composite curing

(2010) Y. Ledru et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Void formation in composite prepregs – Effect of dissolved moisture

(2010) L.K. Grunenfelder et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Measuring the impregnation of an out-of-autoclave prepreg by micro-CT

(2010) T. Centea et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates

(2010) Hong-yan ZHU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM

(2009) Jeffrey M. Lawrence et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Through thickness air permeability of prepregs during cure

(2009) S. Sequeira Tavares et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry

(2009) T. Staffan Lundström et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Influence of prepreg conditions on the void occurrence and tensile properties of woven glass fiber-reinforced polyimide composites

(2009) Tamaki Naganuma et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Automated analysis and advanced defect characterisation from ultrasonic scans of composites

(2009) R A Smith et al.   INSIGHT

Nondestructive evaluation of aircraft composites using reflective terahertz time domain spectroscopy

(2009) Christopher Stoik et al.   NDT & E INTERNATIONAL

Defect damage mechanics: broader strategy for performance evaluation of composites

(2009) R. Talreja   PLASTICS RUBBER AND COMPOSITES

Void formation model and measuring method of void formation condition during hot pressing process

(2009) Yizhuo Gu et al.   POLYMER COMPOSITES

Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures

(2008) K. Potter et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Porosity reduction using optimized flow velocity in Resin Transfer Molding

(2008) Jean Sébastien Leclerc et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of low frequency vibrations on void content in composite materials

(2008) J. Muric-Nesic et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mode I Strain Energy Release Rate in composite laminates in the presence of voids

(2008) Mauro Ricotta et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effects of Manufacturing-Induced Voids on Local Failure in Polymer-Based Composites

(2008) K. A. Chowdhury et al.   JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME

Nondestructive evaluation of aircraft composites using transmissive terahertz time domain spectroscopy

(2008) Christopher D. Stoik et al.   OPTICS EXPRESS

Dynamic void content prediction during radial injection in liquid composite molding

(2007) Boris Gourichon et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Bubble motion through non-crimp fabrics during composites manufacturing

(2007) Vilnis Frishfelds et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING