A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

Additive construction: State-of-the-art, challenges and opportunities

(2016) Nathalie Labonnote et al.   AUTOMATION IN CONSTRUCTION

Shrinkage characteristics of structural nano-synthetic fibre-reinforced cementitious composites

(2016) Su-Jin Lee et al.   COMPOSITE STRUCTURES

Adaptation of the standard EN 196-1 for mortar with accelerator

(2016) Isaac Galobardes et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete

(2016) Yimmy Fernando Silva et al.   CONSTRUCTION AND BUILDING MATERIALS

Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)

(2016) M. Mastali et al.   CONSTRUCTION AND BUILDING MATERIALS

Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete

(2016) Renan P. Salvador et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement

(2016) Ge Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Monitoring the setting process of eco-binders by ultrasonic P-wave and S-wave transmission velocity measurement: Mortar vs concrete

(2016) Jérôme Carette et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete

(2016) Zengqi Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Hydration kinetics and compressive strength of steam-cured cement pastes and mortars containing limestone filler

(2016) M. Aqel et al.   CONSTRUCTION AND BUILDING MATERIALS

Three dimensional printing: A review on the utility within medicine and otolaryngology

(2016) Rachel Kaye et al.   INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

(2016) C. Gosselin et al.   MATERIALS & DESIGN

Method of formulating geopolymer for 3D printing for construction applications

(2016) Ming Xia et al.   MATERIALS & DESIGN

Monitoring freshly poured concrete using ultrasonic waves guided through reinforcing bars

(2015) Shruti Sharma et al.   CEMENT & CONCRETE COMPOSITES

Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete

(2015) Erhan Güneyisi et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete

(2015) Mouhcine Benaicha et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of structures 3D printed with cementitious powders

(2015) Peng Feng et al.   CONSTRUCTION AND BUILDING MATERIALS

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

(2015) A. Perrot et al.   MATERIALS AND STRUCTURES

Monitoring setting and hardening process of mortar and concrete using ultrasonic shear waves

(2014) Shukui Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Ultrasonic guided waves for monitoring the setting process of concretes with varying workabilities

(2014) Shruti Sharma et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete

(2013) Ali Mardani-Aghabaglou et al.   CONSTRUCTION AND BUILDING MATERIALS

Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete

(2013) Doo-Yeol Yoo et al.   CONSTRUCTION AND BUILDING MATERIALS

Compatibility between superplasticizer admixtures and cements with mineral additions

(2012) Olga Burgos-Montes et al.   CONSTRUCTION AND BUILDING MATERIALS

Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes

(2012) Erhan Güneyisi et al.   CONSTRUCTION AND BUILDING MATERIALS

Compressive strength of ash-based geopolymers at early ages designed by Taguchi method

(2012) Shadi Riahi et al.   MATERIALS & DESIGN

Compressive strength of geopolymers produced by ordinary Portland cement: Application of genetic programming for design

(2012) Ali Nazari   MATERIALS & DESIGN

Mix design and fresh properties for high-performance printing concrete

(2012) T. T. Le et al.   MATERIALS AND STRUCTURES

Developments in construction-scale additive manufacturing processes

(2011) S. Lim et al.   AUTOMATION IN CONSTRUCTION

Monitoring of the strength gain of concrete using embedded PZT impedance transducer

(2011) Dansheng Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Setting Time and Flowability of Accelerated Portland Cement Mixed with Polycarboxylate Superplasticizer

(2011) Norachai Wongkornchaowalit et al.   JOURNAL OF ENDODONTICS

Utilization of silica fume in concrete: Review of hardened properties

(2011) Rafat Siddique   RESOURCES CONSERVATION AND RECYCLING

Effect of superplasticizers on the hydration kinetic and mechanical properties of Portland cement pastes

(2011) Safaa M.A. El-Gamal et al.   Journal of Advanced Research

A new look at the measurement of cementitious paste setting by Vicat test

(2010) Hassan Sleiman et al.   CEMENT AND CONCRETE RESEARCH

Effect of superplasticizers on workability retention and initial setting time of cement pastes

(2010) Min-Hong Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Nanotechnology in concrete – A review

(2010) Florence Sanchez et al.   CONSTRUCTION AND BUILDING MATERIALS

Three-dimensional printing of flash-setting calcium aluminate cement

(2010) Anne-Kathrin Maier et al.   JOURNAL OF MATERIALS SCIENCE

3D printing based on imaging data: review of medical applications

(2010) F. Rengier et al.   International Journal of Computer Assisted Radiology and Surgery

Inkjet Printing-Process and Its Applications

(2009) Madhusudan Singh et al.   ADVANCED MATERIALS

3D Printing of cement composites

(2009) G. Gibbons   Advances in Applied Ceramics

Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts

(2009) Anatol Zingg et al.   CEMENT & CONCRETE COMPOSITES

Engineered cementitious composite with characteristic of low drying shrinkage

(2009) Jun Zhang et al.   CEMENT AND CONCRETE RESEARCH

Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques

(2009) Rikard Ylmén et al.   CEMENT AND CONCRETE RESEARCH

Shrinkage Measurement in Concrete Materials using Cure Reference Method

(2009) T. C. Chen et al.   EXPERIMENTAL MECHANICS

Fresh properties of self-compacting rubberized concrete incorporated with fly ash

(2009) Erhan Güneyisi   MATERIALS AND STRUCTURES

Effects of packing density, excess water and solid surface area on flowability of cement paste

(2008) A. K. H. Kwan et al.   ADVANCES IN CEMENT RESEARCH

Possibilities of using the ultrasonic wave transmission method to estimate initial setting time of cement paste

(2008) Gregor Trtnik et al.   CEMENT AND CONCRETE RESEARCH

Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface

(2008) J. Plank et al.   CEMENT AND CONCRETE RESEARCH

Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity

(2008) Nicolas Robeyst et al.   CEMENT AND CONCRETE RESEARCH

A linear test method for determining early-age shrinkage of concrete

(2008) M. D. Newlands et al.   MAGAZINE OF CONCRETE RESEARCH

Performance of self-compacting concrete containing fly ash

(2007) J.M. Khatib   CONSTRUCTION AND BUILDING MATERIALS