Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications
Authors
Keywords
-
Journal
CHEMICAL REVIEWS
Volume -, Issue -, Pages -
Publisher
American Chemical Society (ACS)
Online
2021-05-06
DOI
10.1021/acs.chemrev.1c00060
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Directly Printed Oxide/ZSM-5 Bifunctional Catalysts for Methanol Conversion to Dimethyl Ether with Exceptional Stability, Conversion, and Selectivity
- (2021) Fatima Magzoub et al. ENERGY & FUELS
- Integrating Reactors and Catalysts through Three‐Dimensional Printing: Efficiency and Reusability of an Impregnated Palladium on Silica Monolith in Sonogashira and Suzuki Reactions
- (2020) Antonio S. Díaz‐Marta et al. ChemCatChem
- Production of MOF Adsorbent Spheres and Comparison of Their Performance with Zeolite 13X in a Moving-Bed TSA Process for Postcombustion CO2 Capture
- (2020) Giorgia Mondino et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Structured Zeolite Monoliths with Ultrathin Framework for Fast CO2 Adsorption Enabled by 3D Printing
- (2020) Hemin Zhang et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- 3D-Printed ZIF-8 Monoliths for Biobutanol Recovery
- (2020) Benjamin Claessens et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Connecting Microscopic Structures, Mesoscale Assemblies, and Macroscopic Architectures in 3D-Printed Hierarchical Porous Covalent Organic Framework Foams
- (2020) Abdul Khayum Mohammed et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: Towards load-bearing applications
- (2020) Geuntak Lee et al. Additive Manufacturing
- Analysis of dynamic CO 2 capture over 13X zeolite monoliths in the presence of SO x , NO x and humidity
- (2020) Qasim Al‐Naddaf et al. AICHE JOURNAL
- 3D Printed Palladium Catalyst for Suzuki‐Miyaura Cross‐coupling Reactions
- (2020) Evgeny Bulatov et al. ChemCatChem
- The effects of cell density and intrinsic porosity on structural properties and adsorption kinetics in 3D-printed zeolite monoliths
- (2020) Shane Lawson et al. CHEMICAL ENGINEERING SCIENCE
- 3D printed catalytic converters with enhanced activity for low-temperature methane oxidation in dual-fuel engines
- (2020) Saeed Hajimirzaee et al. FUEL
- Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties
- (2020) J. Sebastián Manzano et al. APPLIED CATALYSIS A-GENERAL
- Direct Ink Writing of Metal Oxide/H-ZSM-5 Catalysts for n-Hexane Cracking: A New Method of Additive Manufacturing with High Metal Oxide Loading
- (2020) Shane Lawson et al. ACS Applied Materials & Interfaces
- Customizable Heterogeneous Catalysts: Nonchanneled Advanced Monolithic Supports Manufactured by 3D-Printing for Improved Active Phase Coating Performance
- (2020) Cristian Y. Chaparro-Garnica et al. ACS Applied Materials & Interfaces
- Gel–Print–Grow: A New Way of 3D Printing Metal–Organic Frameworks
- (2020) Shane Lawson et al. ACS Applied Materials & Interfaces
- 3D-printing of metallic honeycomb monoliths as a doorway to a new generation of catalytic devices: the Ni-based catalysts in methane dry reforming showcase
- (2020) Fazia Agueniou et al. CATALYSIS COMMUNICATIONS
- Multiscale investigation of adsorption properties of novel 3D printed UTSA-16 structures
- (2020) Carlos A. Grande et al. CHEMICAL ENGINEERING JOURNAL
- Binder-free 3D printing of covalent organic framework (COF) monoliths for CO2 adsorption
- (2020) Ximeng Liu et al. CHEMICAL ENGINEERING JOURNAL
- A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation
- (2020) Shane Lawson et al. Advanced Sustainable Systems
- Binderless zeolite monoliths production with sacrificial biopolymers
- (2020) Shane Lawson et al. CHEMICAL ENGINEERING JOURNAL
- Linking Fresh Paste Microstructure, Rheology and Extrusion Characteristics of Cementitious Binders for 3D Printing
- (2019) Sooraj A.O. Nair et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Metallic Nanoparticle Inks for 3D Printing of Electronics
- (2019) Hong Wei Tan et al. Advanced Electronic Materials
- Hierarchical-Coassembly-Enabled 3D-Printing of Homogeneous and Heterogeneous Covalent Organic Frameworks
- (2019) Mingshi Zhang et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Next frontiers in cleaner synthesis: 3D printed graphene-supported CeZrLa mixed-oxide nanocatalyst for CO2 utilisation and direct propylene carbonate production
- (2019) Vesna Middelkoop et al. JOURNAL OF CLEANER PRODUCTION
- Amine-Functionalized MIL-101 Monoliths for CO2 Removal from Enclosed Environments
- (2019) Shane Lawson et al. ENERGY & FUELS
- Separation and enrichment of CH4 and CO2 from a dry biogas using a thermally regenerative adsorbent-packed heat exchanger
- (2019) Nur Izdiharr Zainol et al. ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY
- 3D-printed ZSM-5 monoliths with metal dopants for methanol conversion in the presence and absence of carbon dioxide
- (2019) Fatima Magzoub et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Investigation on Long Term Operation of Thermochemical Heat Storage with MgO-Based Composite Honeycombs
- (2019) Jae Lee et al. Energies
- Electrical conductive 3D-printed monolith adsorbent for CO2 capture
- (2019) Maria João Regufe et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Monoliths with MFI zeolite layers prepared with the assistance of 3D printing: Characterization and performance in the gas phase isomerization of α-pinene
- (2019) E. Hędrzak et al. APPLIED CATALYSIS A-GENERAL
- A techno-economic evaluation of the hydrogen production for energy generation using an ethanol fuel processor
- (2019) Tamara Siqueira Moraes et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Fabricating Mechanically Robust Binder-Free Structured Zeolites by 3D Printing Coupled with Zeolite Soldering: A Superior Configuration for CO2 Capture
- (2019) Shuang Wang et al. Advanced Science
- Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing
- (2019) Hongzhi Wu et al. MATERIALS & DESIGN
- 3D-Printed Core-Shell Structured MFI-Type Zeolite Monoliths for VOCs Capture under Humid Conditions
- (2019) Shuang Wang et al. ACS Applied Materials & Interfaces
- A conceptual framework and techno-economic analysis of a pelletization-gasification based bioenergy system
- (2019) Priyabrata Pradhan et al. APPLIED ENERGY
- Effect of particle size on 3D printing performance of the food-ink system with cellular food materials
- (2019) Jang Ho Lee et al. JOURNAL OF FOOD ENGINEERING
- 3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction
- (2019) Ander Elkoro et al. Applied Materials Today
- Intrinsic Thermal Desorption in a 3D Printed Multifunctional Composite CO2 Sorbent with Embedded Heating Capability
- (2019) Jamie F. Thompson et al. ACS Applied Materials & Interfaces
- 3D Printing of Powder‐Based Inks into Functional Hierarchical Porous TiO 2 Materials
- (2019) Chenyang Xu et al. ADVANCED ENGINEERING MATERIALS
- Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Fluorine-containing polyimide/polysilsesquioxane carbon molecular sieve membranes and techno-economic evaluation thereof for C3H6/C3H8 separation
- (2019) Ju Ho Shin et al. JOURNAL OF MEMBRANE SCIENCE
- 3D printed microchannel loaded with hematite nanoadsorbent for fluoride removal from water
- (2019) Ravi Kumar Patel et al. MATERIALS LETTERS
- Study on the Printability through Digital Light Processing Technique of Ionic Liquids for CO2 Capture
- (2019) Matteo Gillono et al. Polymers
- 3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study
- (2019) Vesna Middelkoop et al. Journal of CO2 Utilization
- Biomimetic metal-organic nanoparticles prepared with a 3D-printed microfluidic device as a novel formulation for disulfiram-based therapy against breast cancer
- (2019) Ya Chang et al. Applied Materials Today
- Towards additive manufacturing of magnesium alloys through integration of binderless 3D printing and rapid microwave sintering
- (2019) Mojtaba Salehi et al. Additive Manufacturing
- Ammonia decomposition over 3D-printed CeO2 structures loaded with Ni
- (2019) Ilaria Lucentini et al. APPLIED CATALYSIS A-GENERAL
- Development of 3D-Printed Polymer-MOF Monoliths for CO2 Adsorption
- (2019) Shane Lawson et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Multi-purpose structured catalysts designed and manufactured by 3D printing
- (2019) Anna Lind et al. MATERIALS & DESIGN
- UTSA-16 Growth within 3D-Printed Co-Kaolin Monoliths with High Selectivity for CO2/CH4, CO2/N2, and CO2/H2 Separation
- (2018) Shane Lawson et al. ACS Applied Materials & Interfaces
- 3D-Printed Fe-doped silicon carbide monolithic catalysts for wet peroxide oxidation processes
- (2018) A. Quintanilla et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Three-dimensional printing of porous carbon structures with tailorable pore sizes
- (2018) Xintong Zhou et al. CATALYSIS TODAY
- Innovative 3D-manufacture of structured copper supports post-coated with catalytic material for CO 2 methanation
- (2018) Simge Danaci et al. CHEMICAL ENGINEERING AND PROCESSING
- Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)
- (2018) Corinna Busse et al. CHEMICAL ENGINEERING AND PROCESSING
- Catalytic cracking of n -hexane for producing light olefins on 3D-printed monoliths of MFI and FAU zeolites
- (2018) Xin Li et al. CHEMICAL ENGINEERING JOURNAL
- Development of 3D-printed polymer-zeolite composite monoliths for gas separation
- (2018) Harshul Thakkar et al. CHEMICAL ENGINEERING JOURNAL
- The impact of formulation and 3D-printing on the catalytic properties of ZSM-5 zeolite
- (2018) J. Lefevere et al. CHEMICAL ENGINEERING JOURNAL
- Tailored catalyst pellet specification for improved fixed-bed transport characteristics: A shortcut method for the model-based reactor design
- (2018) Alexander Pietschak et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- 3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors
- (2018) Cesar Parra-Cabrera et al. CHEMICAL SOCIETY REVIEWS
- Reduction of Electric Power Consumption in CO2-PSA with Zeolite 13X Adsorbent
- (2018) Nobuyuki Shigaki et al. Energies
- Performance Comparison of Metal–Organic Framework Extrudates and Commercial Zeolite for Ethylene/Ethane Separation
- (2018) Siyu Pu et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites
- (2018) Xiao-guang Liu et al. International Journal of Minerals Metallurgy and Materials
- 3D-printed SAPO-34 monoliths for gas separation
- (2018) Sarah Couck et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Shape engineering of metal–organic frameworks
- (2018) Bardiya Valizadeh et al. POLYHEDRON
- A short review of recent advances in CO2 hydrogenation to hydrocarbons over heterogeneous catalysts
- (2018) Wenhui Li et al. RSC Advances
- Direct 3D Printing of Reactive Agitating Impellers for the Convenient Treatment of Various Pollutants in Water
- (2018) Xueyan Sun et al. Advanced Materials Interfaces
- Carbon Hollow Fiber-Supported Metal-Organic Framework Composites for Gas Adsorption
- (2018) Shane Lawson et al. Energy Technology
- 3D-printed zeolite monoliths with hierarchical porosity for selective methanol to light olefins reaction
- (2018) Xin Li et al. Reaction Chemistry & Engineering
- 3D Printed Optical Quality Silica and Silica-Titania Glasses from Sol-Gel Feedstocks
- (2018) Joel F. Destino et al. Advanced Materials Technologies
- Laser Sintering of Liquid Metal Nanoparticles for Scalable Manufacturing of Soft and Flexible Electronics
- (2018) Shanliangzi Liu et al. ACS Applied Materials & Interfaces
- Shaping of ultrahigh-loading MOF pellet with a strongly anti-tearing binder for gas separation and storage
- (2018) Jieyi Zheng et al. CHEMICAL ENGINEERING JOURNAL
- 3D Printing of Structured Nanotitania Catalysts: A Novel Binder-Free and Low-Temperature Chemical Sintering Method
- (2018) Ander Elkoro et al. 3D Printing and Additive Manufacturing
- Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing
- (2018) Cheng Zhu et al. Science Advances
- Adsorption of Ethane and Ethylene over 3D-Printed Ethane-Selective Monoliths
- (2018) Harshul Thakkar et al. ACS Sustainable Chemistry & Engineering
- Enhanced Mass Transfer and Improved Catalyst Recovery in a Stirred Reactor by Polymeric Ionic Liquids Modified 3D Printed Devices
- (2018) Juanjuan Wu et al. Advanced Materials Technologies
- Methanol-to-olefin conversion on 3D-printed ZSM-5 monolith catalysts: Effects of metal doping, mesoporosity and acid strength
- (2018) Xin Li et al. MICROPOROUS AND MESOPOROUS MATERIALS
- 3D printed versus spherical adsorbents for gas sweetening
- (2018) Vesna Middelkoop et al. CHEMICAL ENGINEERING JOURNAL
- Oxidative dehydrogenation of ethane under a cyclic redox scheme – Process simulations and analysis
- (2017) Vasudev Pralhad Haribal et al. ENERGY
- Metal–organic frameworks meet scalable and sustainable synthesis
- (2017) Patrick A. Julien et al. GREEN CHEMISTRY
- Comparative Techno-Economic and Environmental Analysis of Ethylene and Propylene Manufacturing from Wet Shale Gas and Naphtha
- (2017) Minbo Yang et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Fabrication of Ce/N co-doped TiO2/diatomite granule catalyst and its improved visible-light-driven photoactivity
- (2017) Yan Chen et al. JOURNAL OF HAZARDOUS MATERIALS
- Toward 3D printed hydrogen storage materials made with ABS-MOF composites
- (2017) Megan C. Kreider et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Adsorption of CO 2 on a confined fluidized bed of pelletized 13X zeolite
- (2017) R. Girimonte et al. POWDER TECHNOLOGY
- MOF immobilization on the surface of polymer-cordierite composite monoliths through in-situ crystal growth
- (2017) Shane Lawson et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Direct 3D Printing of Catalytically Active Structures
- (2017) J. Sebastián Manzano et al. ACS Catalysis
- Three-Dimensional Printing in Catalysis: Combining 3D Heterogeneous Copper and Palladium Catalysts for Multicatalytic Multicomponent Reactions
- (2017) Antonio S. Díaz-Marta et al. ACS Catalysis
- Combining additive manufacturing and catalysis: a review
- (2017) C. Hurt et al. Catalysis Science & Technology
- Shaped binderless ZSM-11 zeolite catalyst prepared via a dry-gel conversion method: Characterization and application for alkylation of benzene with dimethyl ether
- (2017) Wanshuo Zhang et al. Journal of Energy Chemistry
- Monoliths: A Review of the Basics, Preparation Methods and Their Relevance to Oxidation
- (2017) Sandeeran Govender et al. Catalysts
- 3D-printing of hierarchical porous ZSM-5: The importance of the binder system
- (2017) J. Lefevere et al. MATERIALS & DESIGN
- 3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments
- (2016) Harshul Thakkar et al. ACS Applied Materials & Interfaces
- Progress in 3D Printing of Carbon Materials for Energy-Related Applications
- (2016) Kun Fu et al. ADVANCED MATERIALS
- Catalytic performance of Ni/CaO-Ca 5 Al 6 O 14 bifunctional catalyst extrudate in sorption-enhanced steam methane reforming
- (2016) Pan Xu et al. CATALYSIS TODAY
- Modeling of cryo-adsorption of hydrogen on MOF-5 pellets: Effect of pellet properties on moderate pressure refueling
- (2016) Jerome P. Ortmann et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- 3D printing of a heterogeneous copper-based catalyst
- (2016) Carmen R. Tubío et al. JOURNAL OF CATALYSIS
- The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites
- (2016) Matthew R. Skorski et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane
- (2016) P. Michorczyk et al. Journal of Materials Chemistry A
- Effect of the degree of substitution in the transition temperatures and hydrophobicity of hydroxypropyl cellulose esters
- (2015) Delia López-Velázquez et al. CARBOHYDRATE POLYMERS
- Adsorption and diffusion of H 2 , N 2 , CO, CH 4 and CO 2 in UTSA-16 metal-organic framework extrudates
- (2015) Vicente I. Agueda et al. CHEMICAL ENGINEERING SCIENCE
- A more efficient way to shape metal-organic framework (MOF) powder materials for hydrogen storage applications
- (2015) Jianwei Ren et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- A review on solid adsorbents for carbon dioxide capture
- (2015) Seul-Yi Lee et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting
- (2015) Arto Ojuva et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Performance of an open thermal adsorption storage system with Linde type A zeolites: Beads versus honeycombs
- (2015) Jochen Jänchen et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Manufacturing of metal-organic framework monoliths and their application in CO 2 adsorption
- (2015) Wan Yun Hong et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Design and 3D Printing of Scaffolds and Tissues
- (2015) Jia An et al. Engineering
- Hierarchical porous metal–organic framework monoliths
- (2014) Adham Ahmed et al. CHEMICAL COMMUNICATIONS
- Experimental and numerical investigations on the water vapor adsorption isotherms and kinetics of binderless zeolite 13X
- (2014) Barbara Mette et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Structuring adsorbents and catalysts by processing of porous powders
- (2014) Farid Akhtar et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication of 3D photocatalytic α-Fe2O3 structure using direct ink writing method
- (2014) Yayun Li et al. MODERN PHYSICS LETTERS B
- Light olefins/paraffins separation with 13X zeolite binderless beads
- (2014) Guler Narin et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Three-dimensional Printed Acrylonitrile Butadiene Styrene Framework Coated with Cu-BTC Metal-organic Frameworks for the Removal of Methylene Blue
- (2014) Zongyuan Wang et al. Scientific Reports
- Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle
- (2013) M. Zare et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Effects of pelletization pressure on the physical and chemical properties of the metal–organic frameworks Cu3(BTC)2 and UiO-66
- (2013) Gregory W. Peterson et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Binary adsorption of CO2/CH4 in binderless beads of 13X zeolite
- (2013) José A.C. Silva et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption
- (2012) Niklas Hedin et al. APPLIED ENERGY
- Fabrication of granulated NaY zeolite nanoparticles using a new method and study the adsorption properties
- (2012) Amir Charkhi et al. POWDER TECHNOLOGY
- Kinetics of hydrogen iodide decomposition over activated carbon catalysts in pellets
- (2011) P. Favuzza et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Optimal design of engineered gas adsorbents: Pore-scale level
- (2011) Fateme Rezaei et al. CHEMICAL ENGINEERING SCIENCE
- Coordination-Chemistry Control of Proton Conductivity in the Iconic Metal–Organic Framework Material HKUST-1
- (2011) Nak Cheon Jeong et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Optimization of process parameters on the extrusion of honeycomb shaped monolith of H-ZSM-5 zeolite
- (2010) A. Aranzabal et al. CHEMICAL ENGINEERING JOURNAL
- Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO2 Capture
- (2010) Farid Akhtar et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Carbon-Based Honeycomb Monoliths for Environmental Gas-Phase Applications
- (2010) Carlos Moreno-Castilla et al. Materials
- Solid heterogeneous catalysts for transesterification of triglycerides with methanol: A review
- (2009) Z. Helwani et al. APPLIED CATALYSIS A-GENERAL
- Photocatalytic reaction intensification using monolithic supports designed by stereolithography
- (2009) M. Furman et al. CHEMICAL ENGINEERING AND PROCESSING
- Optimum structured adsorbents for gas separation processes
- (2009) Fateme Rezaei et al. CHEMICAL ENGINEERING SCIENCE
- Preparation of binderless honeycomb silicalite-1 monolith by using bundled palm fibers as template
- (2009) Jinhuang Xu et al. JOURNAL OF POROUS MATERIALS
- Structured adsorbents in gas separation processes
- (2009) F. Rezaei et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Capture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption
- (2008) Penny Xiao et al. ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY
- Designing a supercritical steam cycle to integrate the energy requirements of CO2 amine scrubbing
- (2008) Luis M. Romeo et al. International Journal of Greenhouse Gas Control
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More