- Home
- Publications
- Publication Search
- Publication Details
Title
Review: Special brazing and soldering
Authors
Keywords
Special brazing/soldering, Laser brazing, Ultrasonic brazing, Wave soldering, Infrared brazing
Journal
Journal of Manufacturing Processes
Volume 60, Issue -, Pages 608-635
Publisher
Elsevier BV
Online
2020-11-12
DOI
10.1016/j.jmapro.2020.10.049
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Mechanical properties and microstructure evolution of CrMnFeCoNi HEA/304 SS dissimilar brazing joints
- (2020) Ge Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dissimilar laser brazing of aluminum alloy and galvannealed steel and defect control using interlayer
- (2020) Tomo Ogura et al. Welding in the World
- Investigations on the occurrence of different wetting regimes in laser brazing of zinc-coated steel sheets
- (2020) Thorsten Mattulat et al. Welding in the World
- Effect of laser heat input on the interface morphology during laser joining of CFRTP and 6061 aluminum alloy
- (2020) Yun Li et al. Journal of Manufacturing Processes
- Constant current induction brazing process optimization of AgCdO15-Cu electrical contact
- (2020) Lei Zhou et al. Journal of Manufacturing Processes
- Nd:YAG pulsed laser brazing of cBN to steel matrix with Zr modified Ag–Cu–Ti active brazing alloy
- (2020) Yonggui Huang et al. DIAMOND AND RELATED MATERIALS
- Metal flow of weld pool and keyhole evolution in gas focusing plasma arc welding
- (2020) Tian Qing Li et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Ultrasonic welding of magnesium alloys: a review
- (2020) Felice Rubino et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation of laser joining process of CFRTP and aluminum alloy
- (2020) Hengchang Bu et al. MATERIALS AND MANUFACTURING PROCESSES
- Microstructure evolution and mechanical properties of ultrasonically TLP bonded Mg joint
- (2020) Zhiwu Xu et al. Journal of Manufacturing Processes
- Microstructure and tensile properties of Ti/Al dissimilar joint by laser welding-brazing at subatmospheric pressure
- (2020) Xi Chen et al. Journal of Manufacturing Processes
- Effects of glass composition and joining parameters on microstructural evolution and mechanical properties of Al2O3/Cu joints brazed with Bi2O3-B2O3-ZnO glass
- (2020) Haiyan Chen et al. Journal of Manufacturing Processes
- Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy
- (2020) Caiwang Tan et al. OPTICS AND LASER TECHNOLOGY
- Influence of wire feed rate on mechanical and microstructure characteristics of aluminum to galvanized steel laser brazed joint
- (2019) D. Narsimhachary et al. Journal of Manufacturing Processes
- Ultrasonic-assisted laser welding on AISI 321 stainless steel
- (2019) S. Yu. Tarasov et al. Welding in the World
- Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: a review
- (2019) Virendra Pratap Singh et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Infrared Brazing of CoCrFeMnNi Equiatomic High Entropy Alloy Using Nickel-Based Braze Alloys
- (2019) Chieh Lin et al. Entropy
- Enhancing the solid/liquid interfacial metallurgical reaction of Sn+Cu composite solder by ultrasonic-assisted chip attachment
- (2019) Hao Pan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites
- (2019) Shahan Tutunjian et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Infrared Brazed Joints of Ti50Ni50 Shape Memory Alloy and Ti-15-3 Alloy Using Two Ag-Based Fillers
- (2019) Chieh Lin et al. Materials
- Effects of Zn on intermetallic compounds and strength of Al/Mg joints ultrasonically soldered in air
- (2019) Zhiwu Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Comparative investigation of three different reforming processes for clinched joint to increase joining strength
- (2019) Chao Chen et al. Journal of Manufacturing Processes
- Friction Stir Spot Welding of Aluminum and Copper: A Review
- (2019) Mingshen Li et al. Materials
- Formation of amorphous interfacial layer between Zn-based alloy and SiC particles under ultrasonic-assisted brazing
- (2018) Zhipeng Ma et al. International Journal of Materials Research
- Laser Brazing Characteristics of Al to Brass with Zn-Based Filler
- (2018) Caiwang Tan et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Dual beam laser keyhole welding of steel/aluminum lapped joints
- (2018) Li Cui et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical performance of composite joints of sapphire by ultrasonic-assisted brazing
- (2018) Wei Cui et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fundamental aspects of ultrasonic assisted induction brazing of diamond onto 1045 steel
- (2018) Guoqin Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties of 7075-Al alloy joint ultrasonically soldered with Ni-foam/Sn composite solder
- (2018) Yong Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Comparative Study on the Microstructure and Mechanical Properties of Cu6Sn5 and Cu3Sn Joints Formed by TLP Soldering With/Without the Assistance of Ultrasonic Waves
- (2018) H. Y. Zhao et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Friction Assisted Joining of titanium and polyetheretherketone (PEEK) sheets
- (2018) Francesco Lambiase et al. THIN-WALLED STRUCTURES
- Ultrasonic soldering of Cu alloy using Ni-foam/Sn composite interlayer
- (2018) Yong Xiao et al. ULTRASONICS SONOCHEMISTRY
- Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al
- (2018) Zhiwu Xu et al. ULTRASONICS SONOCHEMISTRY
- Microstructural evolution of SiC joints soldered using Zn–Al filler metals with the assistance of ultrasound
- (2018) Bingzhi Wu et al. ULTRASONICS SONOCHEMISTRY
- Formation mechanism of sealing edge pores for vacuum glazing using laser brazing technique
- (2018) Jianfeng Zhang et al. VACUUM
- Friction-assisted clinching of Aluminum and CFRP sheets
- (2018) Francesco Lambiase et al. Journal of Manufacturing Processes
- A review on friction-based joining of dissimilar aluminum–steel joints
- (2018) Kush P. Mehta JOURNAL OF MATERIALS RESEARCH
- Ultrafast air bonding between SiC ceramic and SnAgTi alloy under the action of ultrasounds
- (2018) Bingzhi Wu et al. Scientific Reports
- Evolution of microstructure and mechanical properties of Cu/SAC305/Cu solder joints under the influence of low ultrasonic power
- (2017) Ai Ting Tan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improving energy efficiency in friction assisted joining of metals and polymers
- (2017) Francesco Lambiase et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of ultrasonic vibration on welding load, temperature and material flow in friction stir welding
- (2017) Y.B. Zhong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of intermetallic compounds on mechanical properties of copper joints ultrasonic-soldered with Sn-Zn alloy
- (2017) Tianmin Luan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dissimilar friction stir welding of 6061 aluminum alloy and AZ31 magnesium alloy assisted with ultrasonic
- (2017) Shude Ji et al. MATERIALS LETTERS
- Non-interfacial growth of Cu 3 Sn in Cu/Sn/Cu joints during ultrasonic-assisted transient liquid phase soldering process
- (2017) H.Y. Zhao et al. MATERIALS LETTERS
- Infrared Dissimilar Joining of Ti50Ni50 and 316L Stainless Steel with Copper Barrier Layer in between Two Silver-Based Fillers
- (2017) Ren-Kae Shiue et al. Metals
- Friction assisted joining of aluminum and PVC sheets
- (2017) Francesco Lambiase et al. Journal of Manufacturing Processes
- Application of ultrasonic vibrations in welding and metal processing: A status review
- (2017) S. Kumar et al. Journal of Manufacturing Processes
- Ultrasonic-assisted soldering of fine-grained 7034 aluminum alloys using ZnAl filler metals
- (2017) Weibing Guo et al. MATERIALS & DESIGN
- Laser brazing of Inconel 718 and Inconel 600 with BNi-2 nickel-based filler metal
- (2016) A. Khorram et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on diamond vacuum brazed with Cu-based filler metal containing Cr
- (2016) Jin-bin Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Three-beam laser brazing of zinc-coated steel
- (2016) Wilfried Reimann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical Simulation and Parameters Optimization of Laser Brazing of Galvanized Steel
- (2016) Li Shaowei et al. ISIJ INTERNATIONAL
- Microstructure and Mechanical Properties of Plasma Arc Brazed AISI 304L Stainless Steel and Galvanized Steel Plates
- (2016) Yajuan Jin et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Flux-less direct soldering of aluminum by ultrasonic surface activation
- (2016) Somayeh Gheybi Hashemabad et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of high-power-low-frequency ultrasonic vibration time on the microstructure and mechanical properties of lead-free solder joints
- (2016) Ai Ting Tan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ultrafast ultrasonic-assisted joining of bare α-alumina ceramics through reaction wetting by aluminum filler in air
- (2016) Hongjun Ji et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Microstructure and mechanical properties in laser brazing of A5052/AZ31 dissimilar alloys
- (2016) Tomo Ogura et al. Welding in the World
- Effects of Temperature on the Wave Soldering of Printed Circuit Boards: CFD Modeling Approach
- (2016) M.S. Abdul Aziz et al. Journal of Applied Fluid Mechanics
- Ultrasonic-assisted brazing of Al–Ti dissimilar alloy by a filler metal with a large semi-solid temperature range
- (2016) Xiaoguang Chen et al. MATERIALS & DESIGN
- Ni 3 Sn 4 -composed die bonded interface rapidly formed by ultrasonic-assisted soldering of Sn/Ni solder paste for high-temperature power device packaging
- (2016) Hongjun Ji et al. MATERIALS & DESIGN
- Microstructure, mechanical properties and mechanism of ultrasound-assisted rapid transient liquid phase bonding of magnesium alloy in air
- (2016) Ruishan Xie et al. MATERIALS & DESIGN
- Ultrasonic-assisted brazing of sapphire with high strength Al–4.5Cu–1.5Mg alloy
- (2015) Wei Cui et al. CERAMICS INTERNATIONAL
- Flux-free laser joining of aluminum and galvanized steel
- (2015) Sascha Frank JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Interfacial reaction behavior and mechanical properties of ultrasonically brazed Cu/Zn–Al/Cu joints
- (2015) Yong Xiao et al. MATERIALS & DESIGN
- Infrared Brazing of Ti50Ni50 Shape Memory Alloy and 316L Stainless Steel with Two Sliver-Based Fillers
- (2015) Ren-Kae Shiue et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Comparative study on laser brazing and furnace brazing of Inconel 718 alloys with silver based filler metal
- (2015) A. Khorram et al. OPTICS AND LASER TECHNOLOGY
- Microstructures and properties of the Fe-based amorphous foil/aluminum dissimilar joint by ultrasonic-assisted soldering
- (2015) Hongjun Ji et al. Welding in the World
- Low-temperature joining of Fe-based amorphous foil with aluminum by ultrasonic-assisted soldering with Sn-based fillers
- (2015) Hongjun Ji et al. MATERIALS & DESIGN
- Influence of wire feeding speed on laser brazing zinc-coated steel with Cu-based filler metal
- (2014) Ma Kai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- CFD modeling of pin shape effects on capillary flow during wave soldering
- (2014) M.S. Abdul Aziz et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Ultrafine-Grain and Isotropic Cu/SAC305/Cu Solder Interconnects Fabricated by High-Intensity Ultrasound-Assisted Solidification
- (2014) Hongjun Ji et al. JOURNAL OF ELECTRONIC MATERIALS
- Influence of pin offset in PCB through-hole during wave soldering process: CFD modeling approach
- (2013) M.S. Abdul Aziz et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Curing-Induced Distortion Mechanism in Adhesive Bonding of Aluminum AA6061-T6 and Steels
- (2013) XiaoBo Zhu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Infrared Brazing Zirconium using Two Silver Based Foils
- (2013) Cheng-Han Lee et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and joint properties of ultrasonically brazed Al alloy joints using a Zn–Al hypereutectic filler metal
- (2013) Yong Xiao et al. MATERIALS & DESIGN
- Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn–3Al filler metal
- (2013) Yong Xiao et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of Ti–6Al–4V/Al1060 joints by ultrasonic-assisted brazing in air
- (2013) Xiaoguang Chen et al. MATERIALS LETTERS
- Ultrasonic-assisted brazing of SiC ceramic to Ti–6Al–4V alloy using a novel AlSnSiZnMg filler metal
- (2013) Xiaoguang Chen et al. MATERIALS LETTERS
- Ultrasound-induced equiaxial flower-like CuZn5/Al composite microstructure formation in Al/Zn–Al/Cu joint
- (2013) Yong Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Infrared Brazing Ti50Ni50 and Invar Using Ag-Based Filler Foils
- (2013) R. K. Shiue et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser brazing of inconel 718 alloy with a silver based filler metal
- (2013) A. Khorram et al. OPTICS AND LASER TECHNOLOGY
- Performance of brazed diamond wheels fabricated in hydrogen/methane plasmas or a vacuum
- (2012) Bojiang Ma et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove
- (2012) Zhihua Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Interaction behaviors at the interface between liquid Al–Si and solid Ti–6Al–4V in ultrasonic-assisted brazing in air
- (2012) Xiaoguang Chen et al. ULTRASONICS SONOCHEMISTRY
- Identification and chemical characterization of particulate matter from wave soldering processes at a printed circuit board manufacturing company
- (2011) Z. Szoboszlai et al. JOURNAL OF HAZARDOUS MATERIALS
- Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn–Al system solders
- (2011) Toru Nagaoka et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Evolution of Infrared Brazed CP-Ti Using Ti-Cu-Ni Brazes
- (2011) C.T. Chang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Strengthening mechanism of ceramic particle reinforced bonds by ultrasonic brazing of AlMMCs
- (2011) Xue-song LENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Microstructure evolution and mechanical properties of ultrasonic-assisted soldering joints of 2024 aluminum alloys
- (2011) Yuan-xing LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti6Al4V and Al4Cu1Mg
- (2011) Zhipeng Ma et al. ULTRASONICS SONOCHEMISTRY
- On the shear strength of laser brazed SiC–steel joints: Effects of braze metal fillers and surface patterning
- (2010) I. Südmeyer et al. CERAMICS INTERNATIONAL
- Transmission Electron Microscopy Study of the Infrared Brazed High-strength Titanium Alloy
- (2010) Z.Y. Wu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A review on the interfacial intermetallic compounds between Sn–Ag–Cu based solders and substrates
- (2010) Guang Zeng et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
- Fatigue properties of laser-brazed joints of Dual Phase and TRansformation Induced Plasticity steel with a copper–aluminium consumable
- (2010) M.H.E. Janssen et al. MATERIALS & DESIGN
- Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites
- (2010) Jiuchun Yan et al. MATERIALS & DESIGN
- Bead on plate laser brazing of dual phase steel with two copper based consumables
- (2010) M. H. E. Janssen et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Advances in friction welding process: a review
- (2010) M. B. Uday et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Ultrasonic dissolution of brazing of 55% SiCp/A356 composites
- (2010) Yang ZHANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Quality-oriented optimization of wave soldering process by using self-organizing maps
- (2009) Mika Liukkonen et al. APPLIED SOFT COMPUTING
- Infrared brazing Fe3Al intermetallics using the Cu filler metal
- (2009) Y. Li et al. INTERMETALLICS
- Strong bonding of infrared brazed α2-Ti3Al and Ti–6Al–4V using Ti–Cu–Ni fillers
- (2009) R.K. Shiue et al. INTERMETALLICS
- Infrared Brazing Titanium Alloys Using Clad Ti–15Cu–15Ni Fillers with Different Clad Layers
- (2009) Chuen-Yi Chiou et al. ISIJ INTERNATIONAL
- Microstructure and Reliability Comparison of Different Pb-Free Alloys Used for Wave Soldering and Rework
- (2009) Polina Snugovsky et al. JOURNAL OF ELECTRONIC MATERIALS
- Joint strength of aluminum ultrasonic soldered under liquidus temperature of Sn–Zn hypereutectic solder
- (2009) Toru Nagaoka et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Wetting and laser brazing of Zn-coated steel products by Cu–Si filler metal
- (2009) A. Koltsov et al. JOURNAL OF MATERIALS SCIENCE
- Dissimilar laser brazing of boron nitride and tungsten carbide
- (2009) Yoshihisa Sechi et al. MATERIALS & DESIGN
- Composition Dependence of Titanium in Silver-Copper-Titanium Alloy Braze on Dissimilar Laser Brazing of Boron Nitride Ceramics and Cemented Carbide
- (2009) Yoshihisa Sechi et al. MATERIALS TRANSACTIONS
- Hot cracking in laser braze joint of high strength stainless steel using gold brazing filler metal – prevention of hot cracking by controlling thermal cycle
- (2009) K. Saida et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Infrared brazing of Ti50Al50 and Ti–6Al–4V using two Ti-based filler metals
- (2008) R.K. Shiue et al. INTERMETALLICS
- Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal
- (2008) X. Yue et al. MATERIALS CHARACTERIZATION
- Vibration assisted brazing of SiCp/A356 composites: microstructure and mechanical behaviour
- (2008) J. C. Yan et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Influence of laser energy input mode on joint interface characteristics in laser brazing with Cu-base filler metal
- (2008) Li-qun LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Joining of alumina and steel by a laser supported brazing process
- (2007) M. Rohde et al. CERAMICS INTERNATIONAL
- The growth and roughness evolution of intermetallic compounds of Sn–Ag–Cu/Cu interface during soldering reaction
- (2007) D.Q. Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Infrared brazing of Ti–6Al–4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)
- (2007) R.K. Shiue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started