- Home
- Publications
- Publication Search
- Publication Details
Title
Processing of MAX phases: From synthesis to applications
Authors
Keywords
-
Journal
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
Volume 104, Issue 2, Pages 659-690
Publisher
Wiley
Online
2020-10-29
DOI
10.1111/jace.17544
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Application of Electric Current Assisted Sintering Techniques for the Processing of Advanced Materials
- (2020) Martin Bram et al. ADVANCED ENGINEERING MATERIALS
- Microstructural analysis of in-situ reacted Ti2AlC MAX phase composite coating by laser cladding
- (2020) Peter Richardson et al. SURFACE & COATINGS TECHNOLOGY
- Thermal conductivity and electrical transport properties of double-A-layer MAX phase Mo2Ga2C
- (2020) Sen Jin et al. Materials Research Letters
- Formation of Ti2AuN from Au-Covered Ti2AlN Thin Films: A General Strategy to Thermally Induce Intercalation of Noble Metals into MAX Phases
- (2020) Shun Kashiwaya et al. CRYSTAL GROWTH & DESIGN
- Durability of YSZ coated Ti 2 AlC in 1300°C high velocity burner rig tests
- (2020) James L. Smialek et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Oxidation mechanisms in bulk Ti2AlC: Influence of the grain size
- (2020) Wenbo Yu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication and mechanical performance of Ti2AlN prepared by FAST/SPS
- (2020) Xiaoqiang Li et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Oxidation behaviour of V2AlC MAX phase coatings
- (2020) Clio Azina et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Highly Efficient Ultralow Pd Loading Supported on MAX Phases for Chemoselective Hydrogenation
- (2020) Mihaela M. Trandafir et al. ACS Catalysis
- Compatibility of Zr2AlC MAX phase-based ceramics with oxygen-poor, static liquid lead–bismuth eutectic
- (2020) Bensu Tunca et al. CORROSION SCIENCE
- Short SiC fiber/Ti 3 SiC 2 MAX phase composites: Fabrication and creep evaluation
- (2020) Apurv Dash et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Compressive creep of SiC whisker/Ti 3 SiC 2 composites at high temperature in air
- (2020) Apurv Dash et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Microstructure evolution and elemental diffusion behavior near the interface of Cr2AlC and single crystal superalloy DD5 at elevated temperatures
- (2020) Jimeng Li et al. MATERIALS & DESIGN
- Ti2AlC MAX phase for resistance against CMAS attack to thermal barrier coatings
- (2019) Lei Guo et al. CERAMICS INTERNATIONAL
- Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties
- (2019) M.A. Lagos et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis and Characterization of Double Solid Solution (Zr,Ti)2(Al,Sn)C MAX Phase Ceramics
- (2019) Bensu Tunca et al. INORGANIC CHEMISTRY
- Synthesis of Ti3SiC2 MAX phase powder by a molten salt shielded synthesis (MS3) method in air
- (2019) Apurv Dash et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- High temperature compressive creep of dense and porous Cr2AlC in air
- (2019) Wakako Araki et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Cr2AlC MAX phase foams by replica method
- (2019) Soheil Karimi et al. MATERIALS LETTERS
- Molten salt shielded synthesis of oxidation prone materials in air
- (2019) Apurv Dash et al. NATURE MATERIALS
- Laser sintering of electrophoretically deposited (EPD) Ti3SiC2 MAX phase coatings on titanium
- (2019) T. Galvin et al. SURFACE & COATINGS TECHNOLOGY
- A simple method for the synthesis of nanosized Ti3AlC2 powder in NaCl–KCl molten salt
- (2019) Ling Xu Yang et al. Materials Research Letters
- An investigation into the microstructure and mechanical properties of V2AlC MAX phase prepared by microwave sintering
- (2019) Mohsen Hossein-Zadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Topological interlocking and damage mechanisms in periodic Ti2AlC-Al building block composites
- (2019) Martin Stumpf et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Compatibility of SiC--and MAX phase-based ceramics with a KNO3-NaNO3 molten solar salt
- (2019) K. Van Loo et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Point contact abrasive wear behavior of MAX phase materials
- (2019) Lianshi Qu et al. CERAMICS INTERNATIONAL
- Slip casting and pressureless sintering of Ti3AlC2
- (2019) Yimin Gong et al. Journal of Advanced Ceramics
- Multifunctional 3D‐Printed Cellular MAX‐Phase Architectures
- (2019) Manuel Belmonte et al. Advanced Materials Technologies
- Direct ink writing of three dimensional Ti2AlC porous structures
- (2019) Hamada Elsayed et al. Additive Manufacturing
- Densification of complex shape ceramics parts by SPS
- (2019) S. Hocquet et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Thermal stability enhancement of Cr2AlC coatings on Zr by utilizing a double layer diffusion barrier
- (2019) Stanislav Mráz et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The stability of irradiation-induced defects in Zr3AlC2, Nb4AlC3 and (Zr0.5,Ti0.5)3AlC2 MAX phase-based ceramics
- (2019) D. Bowden et al. ACTA MATERIALIA
- Synthesis and formation mechanism of high‐purity Ti 3 AlC 2 powders by microwave sintering
- (2019) Weihua Chen et al. International Journal of Applied Ceramic Technology
- High-temperature oxidation behavior of HiPIMS as-deposited Cr–Al–C and annealed Cr2AlC coatings on Zr-based alloy
- (2019) Michaël Ougier et al. JOURNAL OF NUCLEAR MATERIALS
- Cr 2 AlC MAX phase as bond coat for thermal barrier coatings: Processing, testing under thermal gradient loading, and future challenges
- (2019) Jesus Gonzalez‐Julian et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Mechanical characterisation of the protective Al2O3 scale in Cr2AlC MAX phases
- (2019) J.S.K.-L. Gibson et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis and characterization of MAX phase Cr2AlC based composite coatings by plasma spraying and post annealing
- (2019) Fanyong Zhang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Molten salt shielded synthesis (MS3) of Ti2AlN and V2AlC MAX phase powders in open air
- (2019) Chiranjit Roy et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Role of the X and n factors in ion-irradiation induced phase transformations of M n+1 AX n phases
- (2018) Chenxu Wang et al. ACTA MATERIALIA
- Isothermal oxidation of the Ti 2 AlC MAX phase coatings deposited by kerosene-fuelled HVOF spray
- (2018) Zheng Zhang et al. CORROSION SCIENCE
- Theoretical Prediction and Synthesis of (Cr2/3Zr1/3)2AlC i-MAX Phase
- (2018) Liugang Chen et al. INORGANIC CHEMISTRY
- Residual thermal stress of SiC/Ti3 SiC2 /SiC joints calculation and relaxed by postannealing
- (2018) Xiaobing Zhou et al. International Journal of Applied Ceramic Technology
- Kerosene-fuelled high velocity oxy-fuel (HVOF) spray of Ti 2 AlC MAX phase powders
- (2018) Zheng Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Electrosynthesis of Ti 3 AlC 2 from oxides/carbon precursor in molten calcium chloride
- (2018) Shangshu Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of porosity on elastic properties of Ti 2 AlC and Ti 3 SiC 2 MAX phase foams
- (2018) Beatriz Velasco et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Environmental resistance of Cr2 AlC MAX phase under thermal gradient loading using a burner rig
- (2018) Jesus Gonzalez-Julian et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of texture on oxidation resistance of Ti 3 AlC 2
- (2018) Ludi Xu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti 2 AlC) gel-cast foams
- (2018) Tobias Fey et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Joining of SiC monoliths using a thin MAX phase tape and the elimination of joining layer by solid-state diffusion
- (2018) Pipit Fitriani et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ultra-high temperature porous graded ceramics for solar energy applications
- (2018) R. Licheri et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Molten salt synthesis of MAX phases in the Ti-Al-C system
- (2018) T. Galvin et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Hot corrosion and low cycle fatigue of a Cr 2 AlC-coated superalloy
- (2018) J.L. Smialek et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of thermal performance, flux transmission performance and optical properties of MAX phase materials under concentrated solar irradiation
- (2018) J. Sarwar et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Thermal cycling testing of TBCs on Cr 2 AlC MAX phase substrates
- (2018) J. Gonzalez-Julian et al. SURFACE & COATINGS TECHNOLOGY
- TiC/Ti3AlC2–Co plasma-sprayed coatings with excellent high-temperature tribological properties
- (2018) Hongfei Chen et al. CERAMICS INTERNATIONAL
- Type II Hot Corrosion Screening Tests of a Cr2AlC MAX Phase Compound
- (2018) James L. Smialek et al. OXIDATION OF METALS
- Bonding and oxidation protection of Ti2AlC and Cr2AlC for a Ni-based superalloy
- (2018) Maxim Sokol et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Cold spray deposition of Cr2AlC MAX phase for coatings and bond-coat layers
- (2018) T. Go et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis of MAX Phases in the Zr-Ti-Al-C System
- (2017) Bensu Tunca et al. INORGANIC CHEMISTRY
- Synthesis and oxidation resistance of V2 AlC powders by molten salt method
- (2017) Bingxin Wang et al. International Journal of Applied Ceramic Technology
- Novel MAX-phase Ti 3 AlC 2 catalyst for improving the reversible hydrogen storage properties of MgH 2
- (2017) Ke Wang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Deformation mechanisms during high temperature tensile creep of Ti 3 AlC 2 MAX phase
- (2017) Elodie Drouelle et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, mechanical properties and fracture mechanism of Ti 2 AlC reinforced AZ91D composites fabricated by stir casting
- (2017) Wenbo Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Layered ternary Mn+1AXnphases and their 2D derivative MXene: an overview from a thin-film perspective
- (2017) Per Eklund et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- High-temperature oxidation and compressive strength of Cr2 AlC MAX phase foams with controlled porosity
- (2017) Jesus Gonzalez-Julian et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Crack healing behaviour of Cr 2 AlC MAX phase studied by X-ray tomography
- (2017) R. Pei et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Environmental resistance of a Ti 2 AlC-type MAX phase in a high pressure burner rig
- (2017) James L. Smialek JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effect of excess silicon content on the formation of nano-layered Ti 3 SiC 2 ceramic via infiltration of TiC preforms
- (2017) Hamze Foratirad et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effect of Si additions on the Al 2 O 3 grain refinement upon oxidation of Cr 2 AlC MAX phase
- (2017) Lin Shang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Oxidation and self-healing behaviour of spark plasma sintered Ta 2 AlC
- (2017) Ann-Sophie M. Farle et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Novel Cr 2 AlC MAX-phase/SiC fiber composites: Synthesis, processing and tribological response
- (2017) J. Gonzalez-Julian et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Spark plasma sintering and complex shapes: The deformed interfaces approach
- (2017) Charles Manière et al. POWDER TECHNOLOGY
- Plasma spray of Ti 2 AlC MAX phase powders: Effects of process parameters on coatings' properties
- (2017) Zheng Zhang et al. SURFACE & COATINGS TECHNOLOGY
- One-step synthesis of polycrystalline V 2 AlC thin films on amorphous substrates by magnetron co-sputtering
- (2017) Rui Shu et al. VACUUM
- 2D metal carbides and nitrides (MXenes) for energy storage
- (2017) Babak Anasori et al. Nature Reviews Materials
- Saturation of ion irradiation effects in MAX phase Cr 2 AlC
- (2016) Qing Huang et al. ACTA MATERIALIA
- High temperature ion irradiation effects in MAX phase ceramics
- (2016) D.W. Clark et al. ACTA MATERIALIA
- Synthesis of fine and high purity Cr2AlC powders by novel method
- (2016) C. Guan Advances in Applied Ceramics
- Magnetic MAX phases from theory and experiments; a review
- (2016) A S Ingason et al. JOURNAL OF PHYSICS-CONDENSED MATTER
- Structural Transitions Induced by Ion Irradiation in V2AlC and Cr2AlC
- (2016) Chenxu Wang et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Near Net Shaping of Monolithic and Composite MAX Phases by Injection Molding
- (2016) Jesus Gonzalez-Julian et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Improvement of mechanical properties of SiC(SCS-6) fibre-reinforced Ti 3 AlC 2 matrix composites with Ti barrier layer
- (2016) Shuqi Guo JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti 3 SiC 2 MAX phase using Spark Plasma Sintering
- (2016) Peter Tatarko et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Joining of ceramic matrix composites to high temperature ceramics for thermal protection systems
- (2016) C. Jiménez et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Molten salts electrochemical synthesis of Cr 2 AlC
- (2016) Amr M. Abdelkader JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Structural, physical and mechanical properties of Ti 3 (Al 1−x Si x )C 2 solid solution with x=0–1
- (2016) Huili Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Compressive performance and crack propagation in Al alloy/Ti 2 AlC composites
- (2016) D.A.H. Hanaor et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synthesis and tribological behavior of novel UHMWPE-Ti3 SiC2 composites
- (2016) S. Gupta et al. POLYMER COMPOSITES
- Synthesis and tribological behavior of novel wear-resistant PEEK–Ti3SiC2 composites
- (2016) S Ghosh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- A new method to texture dense M n +1 AX n ceramics by spark plasma deformation
- (2016) T. Lapauw et al. SCRIPTA MATERIALIA
- Experimental study of ceramic foams used as high temperature volumetric solar absorber
- (2016) S. Mey-Cloutier et al. SOLAR ENERGY
- Ti3AlC2 coatings deposited by liquid plasma spraying
- (2016) Haicheng Yu et al. SURFACE & COATINGS TECHNOLOGY
- Oxidative durability of TBCs on Ti2AlC MAX phase substrates
- (2016) James L. Smialek et al. SURFACE & COATINGS TECHNOLOGY
- Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage
- (2016) Lu Shen et al. WEAR
- Evidence for Bulk Ripplocations in Layered Solids
- (2016) Jacob Gruber et al. Scientific Reports
- Synthesis of high-purity Ti2SC powder by microwave hybrid heating
- (2016) Chunlong Guan et al. Journal of Advanced Ceramics
- Effect of Cr 2 AlC content on the properties of a Cu-Cr 2 AlC composite
- (2016) Xin-sheng Wang et al. Results in Physics
- Ti-Al-N MAX Phase a Candidate for Ohmic Contacts to n-GaN
- (2016) M.A. Borysiewicz et al. ACTA PHYSICA POLONICA A
- Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy
- (2016) Willem G. Sloof et al. Scientific Reports
- Effect of neutron irradiation on select MAX phases
- (2015) Darin J. Tallman et al. ACTA MATERIALIA
- Macro-porous Ti2AlC MAX-phase ceramics by the foam replication method
- (2015) C.R. Bowen et al. CERAMICS INTERNATIONAL
- Oxygen diffusivity in alumina scales grown on Al-MAX phases
- (2015) James L. Smialek CORROSION SCIENCE
- MAX phase Ti 2 AlC foams using a leachable space-holder material
- (2015) B. Velasco et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Cold spray deposition of Ti 2 AlC coatings for improved nuclear fuel cladding
- (2015) Benjamin R. Maier et al. JOURNAL OF NUCLEAR MATERIALS
- Fast joining SiC ceramics with Ti 3 SiC 2 tape film by electric field-assisted sintering technology
- (2015) Xiaobing Zhou et al. JOURNAL OF NUCLEAR MATERIALS
- Approximate lattice thermal conductivity of MAX phases at high temperature
- (2015) Chandra Dhakal et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis of high-purity, isotropic or textured Cr 2 AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders
- (2015) Xiaoming Duan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication of Ti 2 AlN ceramics with orientation growth behavior by the microwave sintering method
- (2015) Wulong Liu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Porous Ti3SiC2 fabricated by mixed elemental powders reactive synthesis
- (2015) Xinli Liu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ti2AlC foams produced by gel-casting
- (2015) M. Potoczek et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage
- (2015) Ann-Sophie Farle et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ripplocations in van der Waals Layers
- (2015) Akihiro Kushima et al. NANO LETTERS
- MAX phase foams produced via powder metallurgy process using water soluble space holder
- (2015) B. Velasco et al. POWDER METALLURGY
- Single-step synthesis process of Ti 3 SiC 2 ohmic contacts on 4H-SiC by sputter-deposition of Ti
- (2015) H. Fashandi et al. SCRIPTA MATERIALIA
- Mo2TiAlC2: A new ordered layered ternary carbide
- (2015) Babak Anasori et al. SCRIPTA MATERIALIA
- Interfacial reactions of a MAX phase/superalloy hybrid
- (2015) James L. Smialek et al. SURFACE AND INTERFACE ANALYSIS
- Solid solution effects in the Ti 2 Al(C x N y ) MAX phases: Synthesis, microstructure, electronic structure and transport properties
- (2014) W. Yu et al. ACTA MATERIALIA
- Crystal structure and formation mechanism of (Cr2/3Ti1/3)3AlC2 MAX phase
- (2014) Zhimou Liu et al. ACTA MATERIALIA
- Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments
- (2014) Olivier Guillon et al. ADVANCED ENGINEERING MATERIALS
- Synthesis and characterization of novel Ti3SiC2–cBN composites
- (2014) Zhengyang Li et al. DIAMOND AND RELATED MATERIALS
- Near-Net-Shape Fabrication of Ti3SiC2-based Ceramics by Three-Dimensional Printing
- (2014) Yuzhao Ma et al. International Journal of Applied Ceramic Technology
- Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites
- (2014) Liangfa Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Rapid Bonding of Ti3SiC2and Ti3AlC2by Pulsed Electrical Current Heating
- (2014) Lu Shen et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Microwave Sintering of Ti3Si(Al)C2Ceramic
- (2014) Fangzhi Li et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Synthesis, microstructure and mechanical properties of Cr2AlC/Al2O3 in situ composites by reactive hot pressing
- (2014) Jianfeng Zhu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fabrication and characterization of pure porous Ti3SiC2 with controlled porosity and pore features
- (2014) C.L. Zhou et al. MATERIALS LETTERS
- Cyclic thermal shock behaviour of a Cr2AlC ceramic
- (2014) Haolin Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ordering of (Cr,V) Layers in Nanolamellar (Cr0.5V0.5)n+1AlCnCompounds
- (2014) El'ad N. Caspi et al. Materials Research Letters
- New Solid Solution MAX Phases: (Ti0.5, V0.5)3AlC2, (Nb0.5, V0.5)2AlC, (Nb0.5, V0.5)4AlC3and (Nb0.8, Zr0.2)2AlC
- (2014) M. Naguib et al. Materials Research Letters
- The structural transitions of Ti3AlC2 induced by ion irradiation
- (2013) Tengfei Yang et al. ACTA MATERIALIA
- 25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials
- (2013) Michael Naguib et al. ADVANCED MATERIALS
- Synthesis of High-Purity Ti3SiC2by Microwave Sintering
- (2013) Qian Wang et al. International Journal of Applied Ceramic Technology
- (Cr2/3Ti1/3)3AlC2and (Cr5/8Ti3/8)4AlC3: New MAX-phase Compounds in Ti-Cr-Al-C System
- (2013) Zhimou Liu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Oxidation and Crack Healing Behavior of a Fine-Grained Cr2AlC Ceramic
- (2013) Shibo Li et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- High temperature physical and mechanical properties of large-scale Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing
- (2013) Yuelei Bai et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanism for abnormal thermal shock behavior of Cr2AlC
- (2013) Shibo Li et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis of high pure Ti3AlC2 and Ti2AlC powders from TiH2 powders as Ti source by tube furnace
- (2013) Liang Li et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- Preparation of Ti3SiC2 powders by the molten salt method
- (2013) Xue Guo et al. MATERIALS LETTERS
- Review of high-temperature central receiver designs for concentrating solar power
- (2013) Clifford K. Ho et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Oxide-scale growth on Cr2AlC ceramic and its consequence for self-healing
- (2013) H.J. Yang et al. SCRIPTA MATERIALIA
- Cold-spray deposition of Ti2AlC coatings
- (2013) S. Rech et al. VACUUM
- A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2and Cr2AlC in Air
- (2013) Darin J. Tallman et al. Materials Research Letters
- Processing and characterization of porous Ti2AlC with controlled porosity and pore size
- (2012) Liangfa Hu et al. ACTA MATERIALIA
- Phase formation and microstructure evolution of arc ion deposited Cr2AlC coating after heat treatment
- (2012) J.J. Li et al. APPLIED SURFACE SCIENCE
- Machinability of Ti3SiC2 with layered structure synthesized by hot pressing mixture of TiCx and Si powder
- (2012) SungSic Hwang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Multiple crack healing of a Ti2AlC ceramic
- (2012) Shibo Li et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Tailoring of the thermal expansion of Cr2(Alx,Ge1−x)C phases
- (2012) Thierry Cabioch et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Cold Spraying of Ti2AlC MAX-Phase Coatings
- (2012) H. Gutzmann et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Tensile creep of Ti2AlC in air in the temperature range 1000–1150°C
- (2012) Darin J. Tallman et al. SCRIPTA MATERIALIA
- Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics
- (2011) Bai Cui et al. ACTA MATERIALIA
- Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
- (2011) Michael Naguib et al. ADVANCED MATERIALS
- Elastic and Mechanical Properties of the MAX Phases
- (2011) Michel W. Barsoum et al. Annual Review of Materials Research
- Oxidation behavior and kinetics of in situ (TiB2+TiC)/Ti3SiC2 composites in air
- (2011) J. Yang et al. CERAMICS INTERNATIONAL
- Progress in research and development on MAX phases: a family of layered ternary compounds
- (2011) Z M Sun INTERNATIONAL MATERIALS REVIEWS
- Synthesis of Ti3SiC2 by infiltration of molten Si
- (2011) Sung Sic Hwang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Reactivity of Ti2AlC and Ti3SiC2 with SiC Fibers and Powders up to Temperatures of 1550°C
- (2011) Charles B. Spencer et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Phase Evaluation in Al2O3Fiber-Reinforced Ti2AlC During Sintering in the 1300°C-1500°C Temperature Range
- (2011) C. B. Spencer et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Three-Dimensional Printing of Ti3SiC2-Based Ceramics
- (2011) Beiya Nan et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Long-Term Oxidation of Ti2AlC in Air and Water Vapor at 1000–1300°C Temperature Range
- (2011) S. Basu et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites
- (2011) W.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- European lead fast reactor—ELSY
- (2011) Alessandro Alemberti et al. NUCLEAR ENGINEERING AND DESIGN
- Pulsed laser deposition from a pre-synthesized Cr2AlC MAX phase target with and without ion-beam assistance
- (2011) C. Lange et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughness
- (2011) Chunfeng Hu et al. SCRIPTA MATERIALIA
- High temperature healing of Ti2AlC: On the origin of inhomogeneous oxide scale
- (2011) H.J. Yang et al. SCRIPTA MATERIALIA
- On the tribology of the MAX phases and their composites during dry sliding: A review
- (2011) S. Gupta et al. WEAR
- Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems—A review
- (2010) A. Sommers et al. APPLIED THERMAL ENGINEERING
- Synthesis of the MAX Phases by Pulse Discharge Sintering
- (2010) ZhengMing Sun et al. International Journal of Applied Ceramic Technology
- Synthesis of Ti3SiC2 bulks by infiltration method
- (2010) Di Shan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A Novel in-situ Synthesis Route of Ti3SiC2-SiC Composite by Liquid Silicon Infiltration
- (2010) Cui-Ying LU et al. JOURNAL OF INORGANIC MATERIALS
- Microstructure of high velocity oxy-fuel sprayed Ti2AlC coatings
- (2010) Marie Sonestedt et al. JOURNAL OF MATERIALS SCIENCE
- Nanoindentation investigation of heavy ion irradiated Ti3(Si,Al)C2
- (2010) X.M. Liu et al. JOURNAL OF NUCLEAR MATERIALS
- Electrophoretic Deposition of Ti3Si(Al)C2from Aqueous Suspension
- (2010) Ying Liang et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Tailoring Ti3SiC2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma Sintering
- (2010) Chunfeng Hu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Fabrication of Textured Nb4AlC3 Ceramic by Slip Casting in a Strong Magnetic Field and Spark Plasma Sintering
- (2010) Chunfeng Hu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Preparation of Reticulated MAX-Phase Support with Morphology-Controllable Nanostructured Ceria Coating for Gas Exhaust Catalyst Devices
- (2010) Ziqi Sun et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- On the effect of texture on the mechanical and damping properties of nanocrystalline Mg-matrix composites reinforced with MAX phases
- (2010) Shahram Amini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Low temperature thermal expansion, high temperature electrical conductivity, and mechanical properties of Nb4AlC3 ceramic synthesized by spark plasma sintering
- (2009) Chunfeng Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Reaction synthesis of Ti3SiC2 phase in plasma sprayed coating
- (2009) Venkata Pasumarthi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermal expansion of select Mn+1AXn (M=earlytransitionmetal, A=Agroupelement, X=C or N) phases measured by high temperature x-ray diffraction and dilatometry
- (2009) T. H. Scabarozi et al. JOURNAL OF APPLIED PHYSICS
- Surface Chemistry, Dispersion Behavior, and Slip Casting of Ti3AlC2Suspensions
- (2009) Ziqi Sun et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of Ti5Si3 on wear properties of Ti3Si(Al)C2
- (2009) Yonglai Liu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Synthesis, microstructure and mechanical properties of Ti3SiC2–TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture
- (2009) WuBian Tian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- XRD investigation of ion irradiated Ti3Si0.90Al0.10C2
- (2009) Xingmin Liu et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Theoretical investigations on the elastic and thermodynamic properties of Ti2AlC0.5N0.5 solid solution
- (2009) Y.L. Du et al. PHYSICS LETTERS A
- The Mn+1AXn phases: Materials science and thin-film processing
- (2009) Per Eklund et al. THIN SOLID FILMS
- Structural, electrical and mechanical characterization of magnetron-sputtered V–Ge–C thin films
- (2008) O. Wilhelmsson et al. ACTA MATERIALIA
- Effects of TiC and Al4C3 addition on combustion synthesis of Ti2AlC
- (2008) C.L. Yeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structural materials for Gen-IV nuclear reactors: Challenges and opportunities
- (2008) K.L. Murty et al. JOURNAL OF NUCLEAR MATERIALS
- Liquid metal embrittlement susceptibility of ferritic–martensitic steel in liquid lead alloys
- (2008) J. Van den Bosch et al. JOURNAL OF NUCLEAR MATERIALS
- Damages induced by heavy ions in titanium silicon carbide: Effects of nuclear and electronic interactions at room temperature
- (2008) J.C. Nappé et al. JOURNAL OF NUCLEAR MATERIALS
- In SituReaction Synthesis, Electrical and Thermal, and Mechanical Properties of Nb4AlC3
- (2008) Chunfeng Hu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- In SituReaction Synthesis and Mechanical Properties of V2AlC
- (2008) Chunfeng Hu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Reaction synthesis of layered ternary Ti2AlC ceramic
- (2008) V. Gauthier-Brunet et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanical properties of pulse discharge sintered Cr2AlC at 25–1000 °C
- (2008) WuBian Tian et al. MATERIALS LETTERS
- Direct diffusion bonding of Ti3SiC2 and Ti3AlC2
- (2008) Xiaohui Yin et al. MATERIALS RESEARCH BULLETIN
- Ti2AlC coatings deposited by High Velocity Oxy-Fuel spraying
- (2008) Jenny Frodelius et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites
- (2008) D. Filimonov et al. TRIBOLOGY LETTERS
- Tribological behavior of select MAX phases against Al2O3 at elevated temperatures
- (2008) S. Gupta et al. WEAR
- Oxidation-induced crack healing in Ti3AlC2 ceramics
- (2007) G.M. Song et al. SCRIPTA MATERIALIA
- Ambient and 550°C tribological behavior of select MAX phases against Ni-based superalloys
- (2007) S. Gupta et al. WEAR
- Material removal and surface damage in EDM of Ti3SiC2 ceramic
- (2006) C.F. Hu et al. CERAMICS INTERNATIONAL
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started