Energy balance analysis, combustion characteristics, and particulate number concentration-NO trade-off of a heavy-duty diesel engine fueled with various PODEn/diesel blends

Parametric study on effects of excess air/fuel ratio, spark timing, and methanol injection timing on combustion characteristics and performance of natural gas/methanol dual-fuel engine at low loads

(2020) Zhanming Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Energy and exergy analysis of combined ORC – ERC system for biodiesel-fed diesel engine waste heat recovery

(2020) Javad Jannatkhah et al.   ENERGY CONVERSION AND MANAGEMENT

An experimental study on energy-exergy analysis and sustainability index in a diesel engine with direct injection diesel-biodiesel-butanol fuel blends

(2020) Selçuk Sarıkoç et al.   FUEL

Overview of polyoxymethylene dimethyl ether additive as an eco-friendly fuel for an internal combustion engine: Current application and environmental impacts

(2020) Omar I. Awad et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Combustion and energy balance analysis of an unthrottled gasoline engine equipped with innovative variable valvetrain

(2020) Xianjie Zhou et al.   APPLIED ENERGY

Investigations of energy, exergy distribution characteristics of overall working conditions and effect of key boundary parameters on residual energy availability in an automotive turbocharged diesel engine

(2020) Changcheng Liu et al.   APPLIED THERMAL ENGINEERING

Exergy assessment of combustion and EGR and load effects in DI diesel engine using comprehensive two-zone modeling

(2020) Dimitrios C. Rakopoulos et al.   ENERGY

Study on influencing factors of particle emissions from a RCCI engine with variation of premixing ratio and total cycle energy

(2020) Weiqiang Han et al.   ENERGY

A comprehensive parametric, energy and exergy analysis for oxygenated biofuels based dual-fuel combustion in an automotive light duty diesel engine

(2020) Murugan Rangasamy et al.   FUEL

Influence of injection parameters on combustion, gaseous emissions and particle size distribution of a CRDI diesel engine operating with PODE/diesel blends

(2020) Tianting Wang et al.   FUEL

Effects of gasoline and polyoxymethylene dimethyl ethers blending in diesel on the combustion and emission of a common rail diesel engine

(2019) Hao Chen et al.   ENERGY

An analysis of energy flow in a turbocharged diesel engine of a heavy truck and potentials of improving fuel economy and reducing exhaust emissions

(2019) Jianbing Gao et al.   ENERGY CONVERSION AND MANAGEMENT

Potential improvement in particulate matter’s emissions reduction from diesel engine by addition of PODE and injection parameters

(2019) Hui Chen et al.   APPLIED THERMAL ENGINEERING

Thermal Efficiency Improvement of PODE/Gasoline Dual-Fuel RCCI High Load Operation with EGR and Air Dilution

(2019) Hu Wang et al.   APPLIED THERMAL ENGINEERING

Experimental comparative assessment of butanol or ethanol diesel-fuel extenders impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engine

(2019) Constantine D. Rakopoulos et al.   ENERGY

Experimental study on energy balance of different parameters in diesel methanol dual fuel engine

(2019) Baodong Ma et al.   APPLIED THERMAL ENGINEERING

Experimental study of the spray, combustion, and emission performance of a diesel engine with high n-pentanol blending ratios

(2019) Mingzhang Pan et al.   ENERGY CONVERSION AND MANAGEMENT

Impact of fuel and engine operating conditions on efficiency of a heavy duty truck engine running compression ignition mode using energy and exergy analysis

(2019) Buyu Wang et al.   APPLIED ENERGY

Effects of 2,5-dimethylfuran addition on morphology, nanostructure and oxidation reactivity of diesel exhaust particles

(2019) Xiaochen Wang et al.   FUEL

A compressive review on the effects of alcohols and nanoparticles as an oxygenated enhancer in compression ignition engine

(2019) K. Nanthagopal et al.   ENERGY CONVERSION AND MANAGEMENT

Effects of 2-ethylhexyl nitrate and post-injection strategy on combustion and emission characterizes in a dimethyl carbonate/diesel blending engine

(2019) Weiwei Qian et al.   FUEL

Is it really the end of internal combustion engines and petroleum in transport?

(2018) Gautam Kalghatgi   APPLIED ENERGY

NOx emission of biodiesel compared to diesel: Higher or lower?

(2018) Hao Chen et al.   APPLIED THERMAL ENGINEERING

Comparison of single-stage and two-stage thermophilic anaerobic digestion of food waste: Performance, energy balance and reaction process

(2018) Benyi Xiao et al.   ENERGY CONVERSION AND MANAGEMENT

Experiments on the effect of engine speed, load, equivalence ratio, spark timing and coolant temperature on the energy balance of a turbocharged hydrogen engine

(2018) Qing-he Luo et al.   ENERGY CONVERSION AND MANAGEMENT

Effect of EGR dilution on combustion, performance and emission characteristics of a diesel engine fueled with n-pentanol and 2-ethylhexyl nitrate additive

(2018) Mingzhang Pan et al.   ENERGY CONVERSION AND MANAGEMENT

Improvement of high load performance in gasoline compression ignition engine with PODE and multiple-injection strategy

(2018) Jialin Liu et al.   FUEL

Investigation on combustion and emission characteristics of a common rail diesel engine fueled with diesel/n-pentanol/methanol blends

(2018) Hao Chen et al.   ENERGY

Influence of n-butanol-diesel-PODE3-4 fuels coupled pilot injection strategy on combustion and emission characteristics of diesel engine

(2018) Haozhong Huang et al.   FUEL

Investigation on Combustion and Emission Performance of a Common Rail Diesel Engine Fueled with Diesel/Biodiesel/Polyoxymethylene Dimethyl Ethers Blends

(2017) Hao Chen et al.   ENERGY & FUELS

Improvement of emission characteristics and maximum pressure rise rate of diesel engines fueled with n-butanol/PODE 3-4 /diesel blends at high injection pressure

(2017) Haozhong Huang et al.   ENERGY CONVERSION AND MANAGEMENT

Comparative Evaluation of Ethanol, n-Butanol, and Diethyl Ether Effects as Biofuel Supplements on Combustion Characteristics, Cyclic Variations, and Emissions Balance in Light-Duty Diesel Engine

(2017) Dimitrios C. Rakopoulos et al.   JOURNAL OF ENERGY ENGINEERING

Comparative Evaluation of Ethanol, n-Butanol, and Diethyl Ether Effects as Biofuel Supplements on Combustion Characteristics, Cyclic Variations, and Emissions Balance in Light-Duty Diesel Engine

(2017) Dimitrios C. Rakopoulos et al.   JOURNAL OF ENERGY ENGINEERING

Butanol or DEE blends with either straight vegetable oil or biodiesel excluding fossil fuel: Comparative effects on diesel engine combustion attributes, cyclic variability and regulated emissions trade-off

(2016) Dimitrios C. Rakopoulos et al.   ENERGY

Theoretical and experimental investigations on energy balance on DMDF engine

(2016) Guopeng Han et al.   FUEL

Effect of polyoxymethylene dimethyl ethers addition on spray and atomization characteristics using a common rail diesel injection system

(2016) Donghua Li et al.   FUEL

Effects of diesel/PODE (polyoxymethylene dimethyl ethers) blends on combustion and emission characteristics in a heavy duty diesel engine

(2016) Jialin Liu et al.   FUEL

Experimental analysis of the global energy balance in a DI diesel engine

(2015) Francisco Payri et al.   APPLIED THERMAL ENGINEERING

Performance, combustion and emission characteristics of a diesel engine fueled with polyoxymethylene dimethyl ethers (PODE3-4)/ diesel blends

(2015) Haoye Liu et al.   ENERGY

Impact of properties of vegetable oil, bio-diesel, ethanol and n -butanol on the combustion and emissions of turbocharged HDDI diesel engine operating under steady and transient conditions

(2015) Dimitrios C. Rakopoulos et al.   FUEL

Experimental investigation of thermal balance of a turbocharged SI engine operating on natural gas

(2013) A. Gharehghani et al.   APPLIED THERMAL ENGINEERING

Energy balance of internal combustion engines using alternative fuels

(2013) M.J. Abedin et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS