A review of 3D printed concrete: Performance requirements, testing measurements and mix design
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A review of 3D printed concrete: Performance requirements, testing measurements and mix design
Authors
Keywords
3D printed concrete, Printability, Rheology, Green strength, Testing measurements, Mix design
Journal
CONSTRUCTION AND BUILDING MATERIALS
Volume -, Issue -, Pages 121745
Publisher
Elsevier BV
Online
2020-12-12
DOI
10.1016/j.conbuildmat.2020.121745
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield Stress and Structural Build-Up of Fresh Concrete
- (2020) Irina Ivanova et al. Materials
- Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
- (2020) Tao Ding et al. COMPOSITE STRUCTURES
- Mechanical behavior of 3D printed mortar with recycled sand at early ages
- (2020) Tao Ding et al. CONSTRUCTION AND BUILDING MATERIALS
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
- (2020) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of layered 3D printed concrete with recycled sand
- (2020) Tao Ding et al. CEMENT & CONCRETE COMPOSITES
- Improvement on the properties of waste glass mortar with nanomaterials
- (2020) Shaodan Hou et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and harden properties of the high-thixotropy 3D printing concrete
- (2019) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
- (2019) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
- (2019) Ehsan Hosseini et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- How affect the pipe length of pumping circuit on concrete pumping
- (2019) Kyong Pil Jang et al. CONSTRUCTION AND BUILDING MATERIALS
- A systematical review of 3D printable cementitious materials
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
- (2019) Yu Chen et al. Materials
- A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology
- (2019) Guangchao Ji et al. Materials
- Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure
- (2019) Stefan Chaves Figueiredo et al. CONSTRUCTION AND BUILDING MATERIALS
- Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Additive Manufacturing Processes for Infrastructure Construction: A Review
- (2019) Abhinav Bhardwaj et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
- (2019) Oscar A. Mendoza Reales et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
- (2019) Viktor Mechtcherine et al. AUTOMATION IN CONSTRUCTION
- Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
- (2019) R.J.M. Wolfs et al. CEMENT & CONCRETE COMPOSITES
- A review of the current progress and application of 3D printed concrete
- (2019) Jingchuan Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
- (2019) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water
- (2019) John Temitope Kolawole et al. CONSTRUCTION AND BUILDING MATERIALS
- Assessment and prediction of concrete flow and pumping pressure in pipeline
- (2019) Egor Secrieru et al. CEMENT & CONCRETE COMPOSITES
- Rheological properties of mortar containing recycled powders from construction and demolition wastes
- (2019) Zhenhua Duan et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
- (2019) Wu-Jian Long et al. JOURNAL OF CLEANER PRODUCTION
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- A self-reinforced cementitious composite for building-scale 3D printing
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures
- (2018) Siwei Ma et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- The role of early age structural build-up in digital fabrication with concrete
- (2018) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
- (2018) Ye Qian et al. CEMENT AND CONCRETE RESEARCH
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
- (2018) Jian Hui Lim et al. CONSTRUCTION AND BUILDING MATERIALS
- Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete
- (2018) R.J.M. Wolfs et al. CONSTRUCTION AND BUILDING MATERIALS
- Nano-SiO 2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review
- (2018) Mohammad Balapour et al. CONSTRUCTION AND BUILDING MATERIALS
- A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures
- (2018) Dehui Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
- (2018) Sarah Al-Qutaifi et al. CONSTRUCTION AND BUILDING MATERIALS
- The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
- (2018) Da-Wang Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Current challenges and future potential of 3D concrete printing
- (2018) B. Panda et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Measurement of tensile bond strength of 3D printed geopolymer mortar
- (2018) Biranchi Panda et al. MEASUREMENT
- A review of 3D concrete printing systems and materials properties: current status and future research prospects
- (2018) Suvash Chandra Paul et al. RAPID PROTOTYPING JOURNAL
- Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review
- (2018) Gang Xu et al. RESOURCES CONSERVATION AND RECYCLING
- Mechanical characterization of 3D printed anisotropic cementitious material by the electromechanical transducer
- (2018) Guowei Ma et al. Smart Materials and Structures
- Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
- (2018) Zhijian Li et al. International Journal of Concrete Structures and Materials
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials
- (2018) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
- (2018) Hiroki Ogura et al. Materials
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
- (2018) V.N. Nerella et al. CEMENT AND CONCRETE RESEARCH
- A review on effects of limestone powder on the properties of concrete
- (2018) Dehui Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
- (2018) Guowei Ma et al. MATERIALS LETTERS
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
- (2018) Zhixin Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Prediction of reinforced concrete strength by ultrasonic velocities
- (2017) Nevbahar Sabbağ et al. JOURNAL OF APPLIED GEOPHYSICS
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain
- (2017) Fubing Zou et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction
- (2017) GuoWei Ma et al. Science China-Technological Sciences
- A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
- (2017) Guowei Ma et al. Frontiers of Structural and Civil Engineering
- Evolution of strength and failure of SCC during early hydration
- (2016) Linus K. Mettler et al. CEMENT AND CONCRETE RESEARCH
- Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review
- (2016) Erdoğan Özbay et al. CONSTRUCTION AND BUILDING MATERIALS
- The thixotropic behavior of fresh cement asphalt emulsion paste
- (2016) Jian Ouyang et al. CONSTRUCTION AND BUILDING MATERIALS
- Simulating the behaviour of fresh concrete with the Distinct Element Method – Deriving model parameters related to the yield stress
- (2015) Viktor Mechtcherine et al. CEMENT & CONCRETE COMPOSITES
- Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials
- (2015) Reza Saleh Ahari et al. CEMENT & CONCRETE COMPOSITES
- Avoiding inaccurate interpretations of rheological measurements for cement-based materials
- (2015) Olafur H. Wallevik et al. CEMENT AND CONCRETE RESEARCH
- Influence of sodium gluconate on the performance and hydration of Portland cement
- (2015) Suhua Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Ultrasonic evaluation of mechanical properties of concretes produced with high early strength cement
- (2015) Vladimir G. Haach et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of various supplementary cementitious materials on rheological properties of self-consolidating concrete
- (2015) Reza Saleh Ahari et al. CONSTRUCTION AND BUILDING MATERIALS
- A review on mixture design methods for self-compacting concrete
- (2015) Caijun Shi et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of structures 3D printed with cementitious powders
- (2015) Peng Feng et al. CONSTRUCTION AND BUILDING MATERIALS
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes
- (2014) Zhuojun Quanji et al. CONSTRUCTION AND BUILDING MATERIALS
- Numerical simulation of formwork pressure while pumping self-compacting concrete bottom-up
- (2014) Serge Tichko et al. ENGINEERING STRUCTURES
- Thixotropic behavior of self compacting concrete with different mineral admixtures
- (2013) M.K. Rahman et al. CONSTRUCTION AND BUILDING MATERIALS
- Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes
- (2013) H. Khelifi et al. POWDER TECHNOLOGY
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
- (2012) Arnoud Perrot et al. RHEOLOGICA ACTA
- Effect of internal curing on durability-related properties of high performance concrete
- (2011) Semion Zhutovsky et al. CEMENT AND CONCRETE RESEARCH
- The origins of thixotropy of fresh cement pastes
- (2011) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- Utilization of silica fume in concrete: Review of hardened properties
- (2011) Rafat Siddique RESOURCES CONSERVATION AND RECYCLING
- Effect of nano-silica on rheology and fresh properties of cement pastes and mortars
- (2009) Luciano Senff et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of metakaolin on the properties of mortar and concrete: A review
- (2008) Rafat Siddique et al. APPLIED CLAY SCIENCE
- Distinct-layer casting of SCC: The mechanical consequences of thixotropy
- (2007) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- Rheological behavior of high performance concrete with mineral admixtures and their blending
- (2007) Aminul Islam Laskar et al. CONSTRUCTION AND BUILDING MATERIALS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started