Synthetic Polymers for Organ 3D Printing

Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing

(2020) Ahmed Elkaseer et al.   Applied Sciences-Basel

Bioprinting functional tissues

(2019) Ashley N. Leberfinger et al.   Acta Biomaterialia

Multimaterial actinic spatial control 3D and 4D printing

(2019) J. J. Schwartz et al.   Nature Communications

Advances in 3D Bioprinting of Bone: Progress and Challenges

(2019) Swati Midha et al.   Journal of Tissue Engineering and Regenerative Medicine

4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid

(2019) Uchida et al.   Micromachines

Chitosans for Tissue Repair and Organ Three-Dimensional (3D) Bioprinting

(2019) Shenglong Li et al.   Micromachines

Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting

(2019) Xiaohong Wang   Micromachines

Cell reprogramming by 3D bioprinting of human fibroblasts in polyurethane hydrogel for fabrication of neural-like constructs

(2018) Lin Ho et al.   Acta Biomaterialia

Integrated approaches to spatiotemporally directing angiogenesis in host and engineered tissues

(2018) Rajeev J. Kant et al.   Acta Biomaterialia

Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer

(2018) Naga B. Gundrati et al.   COMPOSITES PART B-ENGINEERING

Piezoelectric behavior of three-dimensionally printed acrylate polymer without filler or poling

(2018) Patatri Chakraborty et al.   JOURNAL OF MATERIALS SCIENCE

Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing

(2018) Soon Hee Kim et al.   Nature Communications

Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry

(2018) Marta Revilla-León et al.   Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry

Exploiting Advanced Hydrogel Technologies to Address Key Challenges in Regenerative Medicine

(2018) Daniel A. Foyt et al.   Advanced Healthcare Materials

Delivery of Allogeneic Adipose Stem Cells in Polyethylene Glycol-Fibrin Hydrogels as an Adjunct to Meshed Autografts After Sharp Debridement of Deep Partial Thickness Burns

(2018) David M. Burmeister et al.   Stem Cells Translational Medicine

3D printing of carbon fiber-filled conductive silicon rubber

(2018) Pei Huang et al.   MATERIALS & DESIGN

Synthesis and Characterization of Dual Stimuli-Sensitive Biodegradable Polyurethane Soft Hydrogels for 3D Cell-Laden Bioprinting

(2018) Shih-Hsiang Hsiao et al.   ACS Applied Materials & Interfaces

Hydrogel Biomaterials for Stem Cell Microencapsulation

(2018) Goeun Choe et al.   Polymers

Bioartificial Organ Manufacturing Technologies

(2018) Xiaohong Wang   CELL TRANSPLANTATION

Natural Polymers for Organ 3D Bioprinting

(2018) Fan Liu et al.   Polymers

Preparation and characterization of poly(ε-caprolactone) scaffolds modified with cell-loaded fibrin gel

(2018) Elbay Malikmammadov et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Development of a novel alginate-polyvinyl alcohol-hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds

(2017) Stephanie T. Bendtsen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Stereolithographic hydrogel printing of 3D culture chips with biofunctionalized complex 3D perfusion networks

(2017) Rujing Zhang et al.   LAB ON A CHIP

3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks

(2017) Yongxiang Luo et al.   MATERIALS LETTERS

Fabrication of a Highly Aligned Neural Scaffold via a Table Top Stereolithography 3D Printing and Electrospinning

(2017) Se-Jun Lee et al.   TISSUE ENGINEERING PART A

Water-based polyurethane 3D printed scaffolds with controlled release function for customized cartilage tissue engineering

(2016) Kun-Che Hung et al.   BIOMATERIALS

A comprehensive review on droplet-based bioprinting: Past, present and future

(2016) Hemanth Gudapati et al.   BIOMATERIALS

Current advances and future perspectives in extrusion-based bioprinting

(2016) Ibrahim T. Ozbolat et al.   BIOMATERIALS

3D printing of functional biomaterials for tissue engineering

(2016) Wei Zhu et al.   CURRENT OPINION IN BIOTECHNOLOGY

Stereolithographic (SLA) 3D printing of oral modified-release dosage forms

(2016) Jie Wang et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds

(2016) Eric J. Mott et al.   Materials Science & Engineering C-Materials for Biological Applications

Biodegradable Polymers and Stem Cells for Bioprinting

(2016) Meijuan Lei et al.   MOLECULES

Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting

(2016) Amit Panwar et al.   MOLECULES

Three-dimensional bioprinting of thick vascularized tissues

(2016) David B. Kolesky et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Current status of three-dimensional printing inks for soft tissue regeneration

(2016) Ji Eun Kim et al.   Tissue Engineering and Regenerative Medicine

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

(2016) Xiaohong Wang et al.   Materials

Current status of three-dimensional printing inks for soft tissue regeneration

(2016) Ji Eun Kim et al.   Tissue Engineering and Regenerative Medicine

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

(2016) Thomas J. Hinton et al.   ACS Biomaterials-Science & Engineering

Three-Dimensional Printing of Bone Extracellular Matrix for Craniofacial Regeneration

(2016) Ben P. Hung et al.   ACS Biomaterials-Science & Engineering

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

(2016) Thomas J. Hinton et al.   ACS Biomaterials Science & Engineering

Three-Dimensional Printing of Bone Extracellular Matrix for Craniofacial Regeneration

(2016) Ben P. Hung et al.   ACS Biomaterials Science & Engineering

Synthesis of Thermoresponsive Amphiphilic Polyurethane Gel as a New Cell Printing Material near Body Temperature

(2015) Yi-Chun Tsai et al.   ACS Applied Materials & Interfaces

3D Printed Anatomical Nerve Regeneration Pathways

(2015) Blake N. Johnson et al.   ADVANCED FUNCTIONAL MATERIALS

Nerve guides manufactured from photocurable polymers to aid peripheral nerve repair

(2015) Christopher J. Pateman et al.   BIOMATERIALS

3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair

(2015) Fu-Yu Hsieh et al.   BIOMATERIALS

Fluid and cell behaviors along a 3D printed alginate/gelatin/fibrin channel

(2015) Yufan Xu et al.   BIOTECHNOLOGY AND BIOENGINEERING

Freeform inkjet printing of cellular structures with bifurcations

(2015) Kyle Christensen et al.   BIOTECHNOLOGY AND BIOENGINEERING

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA

(2015) Guifang Gao et al.   BIOTECHNOLOGY LETTERS

Editorial (Thematic Issue: Drug Delivery Design for Regenerative Medicine)

(2015) Xiaohong Wang   CURRENT PHARMACEUTICAL DESIGN

A combined rotational mold for manufacturing a functional liver system

(2015) Xiaohong Wang et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Development of an air-knife system for highly reproducible fabrication of polydimethylsiloxane microstencils

(2015) Jin Ho Choi et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

A building-block approach to 3D printing a multichannel, organ-regenerative scaffold

(2015) Xiaohong Wang et al.   Journal of Tissue Engineering and Regenerative Medicine

3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration

(2015) Fu-Yu Hsieh et al.   Organogenesis

Optimizing cell viability in droplet-based cell deposition

(2015) Jan Hendriks et al.   Scientific Reports

Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging

(2015) Guifang Gao et al.   Biotechnology Journal

Covalent attachment of a three-dimensionally printed thermoplast to a gelatin hydrogel for mechanically enhanced cartilage constructs

(2014) Kristel W.M. Boere et al.   Acta Biomaterialia

An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering

(2014) Piergiorgio Gentile et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds

(2014) Joshua P. Temple et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Natural polymers for the microencapsulation of cells

(2014) L. Gasperini et al.   Journal of the Royal Society Interface

In vitrovascularization of a combined system based on a 3D printing technique

(2014) Xinru Zhao et al.   Journal of Tissue Engineering and Regenerative Medicine

Synthesis and 3D Printing of Biodegradable Polyurethane Elastomer by a Water-Based Process for Cartilage Tissue Engineering Applications

(2014) Kun-Che Hung et al.   Advanced Healthcare Materials

Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines

(2013) Ankit Mahajan et al.   ACS Applied Materials & Interfaces

Innovations in 3D printing: a 3D overview from optics to organs

(2013) Carl Schubert et al.   BRITISH JOURNAL OF OPHTHALMOLOGY

Preparation of an adipose-derived stem cell/fibrin–poly(d,l-lactic-co-glycolic acid) construct based on a rapid prototyping technique

(2013) Xinru Zhao et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane–cell/hydrogel construct

(2013) Xiaohong Wang et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

The effect of lauryl capping group on protein release and degradation of poly(d,l-lactic-co-glycolic acid) particles

(2013) N. Samadi et al.   JOURNAL OF CONTROLLED RELEASE

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

(2013) Joydip Kundu et al.   Journal of Tissue Engineering and Regenerative Medicine

Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs

(2013) Wouter Schuurman et al.   MACROMOLECULAR BIOSCIENCE

Rapid prototyping of a hybrid hierarchical polyurethane-cell/hydrogel construct for regenerative medicine

(2013) Yuanwen Huang et al.   Materials Science & Engineering C-Materials for Biological Applications

3D Printed Bionic Ears

(2013) Manu S. Mannoor et al.   NANO LETTERS

Photopolymerization of cell-encapsulating hydrogels: Crosslinking efficiency versus cytotoxicity

(2012) Iris Mironi-Harpaz et al.   Acta Biomaterialia

Lithography-Based Additive Manufacturing of Cellular Ceramic Structures

(2012) Ruth Felzmann et al.   ADVANCED ENGINEERING MATERIALS

High-Throughput Printing via Microvascular Multinozzle Arrays

(2012) Christopher J. Hansen et al.   ADVANCED MATERIALS

Intelligent Freeform Manufacturing of Complex Organs

(2012) Xiaohong Wang   ARTIFICIAL ORGANS

Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography

(2012) Robert Gauvin et al.   BIOMATERIALS

A three-dimensional microfluidic approach to scaling up microencapsulation of cells

(2012) Sameer Tendulkar et al.   BIOMEDICAL MICRODEVICES

Skin tissue generation by laser cell printing

(2012) Lothar Koch et al.   BIOTECHNOLOGY AND BIOENGINEERING

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

(2012) Bin Duan et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Three-Dimensional Printing of Bone Repair and Replacement Materials

(2012) John L. Ricci et al.   JOURNAL OF CRANIOFACIAL SURGERY

Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues

(2012) Jordan S. Miller et al.   NATURE MATERIALS

Femtosecond laser printing of living cells using absorbing film-assisted laser-induced forward transfer

(2012) Béla Hopp   OPTICAL ENGINEERING

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

(2012) Simon J. Leigh et al.   PLoS One

Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography

(2012) Karina Puebla et al.   RAPID PROTOTYPING JOURNAL

Printing and Prototyping of Tissues and Scaffolds

(2012) B. Derby   SCIENCE

Microfluidics for Manipulating Cells

(2012) Xuan Mu et al.   Small

Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology

(2012) Xiaofeng Cui et al.   TISSUE ENGINEERING PART A

Bioprinting for stem cell research

(2012) Savas Tasoglu et al.   TRENDS IN BIOTECHNOLOGY

Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds

(2012) Aleksander Skardal et al.   Stem Cells Translational Medicine

Preparation of Active Layers in Polymer Solar Cells by Aerosol Jet Printing

(2011) Chunhe Yang et al.   ACS Applied Materials & Interfaces

Nanostructuring biosynthetic hydrogels for tissue engineering: A cellular and structural analysis

(2011) Ilya Frisman et al.   Acta Biomaterialia

A Printable Photopolymerizable Thermosensitive p(HPMAm-lactate)-PEG Hydrogel for Tissue Engineering

(2011) Roberta Censi et al.   ADVANCED FUNCTIONAL MATERIALS

Omnidirectional Printing of 3D Microvascular Networks

(2011) Willie Wu et al.   ADVANCED MATERIALS

Pulsatile Culture of a Poly(DL-Lactic-Co-Glycolic Acid) Sandwiched Cell/Hydrogel Construct Fabricated Using a Step-by-Step Mold/Extraction Method

(2011) Xiaohong Wang et al.   ARTIFICIAL ORGANS

Nanostructuring PEG-fibrinogen hydrogels to control cellular morphogenesis

(2011) Ilya Frisman et al.   BIOMATERIALS

PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP™

(2011) Russell Kirk Pirlo et al.   BIOTECHNOLOGY AND BIOENGINEERING

Rapid prototyping of tubular polyurethane and cell/hydrogel constructs

(2011) Kai He et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Photopolymerization of Pluronic F127 diacrylate: a colloid-templated polymerization

(2011) Manuela Di Biase et al.   Soft Matter

Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering

(2010) Shaun Eshraghi et al.   Acta Biomaterialia

Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting

(2010) Sylvain Catros et al.   APPLIED SURFACE SCIENCE

Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates

(2010) Aleksander Skardal et al.   BIOMATERIALS

An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix

(2010) Mingen Xu et al.   BIOMATERIALS

Bioactive modification of poly(ethylene glycol) hydrogels for tissue engineering

(2010) Junmin Zhu   BIOMATERIALS

Incorporation of DMSO and dextran-40 into a gelatin/alginate hydrogel for controlled assembled cell cryopreservation

(2010) Xiaohong Wang et al.   CRYOBIOLOGY

Design and Fabrication of PLGA Sandwiched Cell/Fibrin Constructs for Complex Organ Regeneration

(2010) Xiaohong Wang et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Cryopreservation of Cell/Hydrogel Constructs Based on a New Cell-assembling Technique

(2010) Xiaohong Wang et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation

(2010) Vincent Chan et al.   LAB ON A CHIP

Characterization of a PLGA sandwiched cell/fibrin tubular construct and induction of the adipose derived stem cells into smooth muscle cells

(2010) Xiaohong Wang et al.   Materials Science & Engineering C-Materials for Biological Applications

Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates

(2010) Jae Dong Kim et al.   POLYMER

Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting

(2010) Aleksander Skardal et al.   TISSUE ENGINEERING PART A

Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts

(2010) Martin Gruene et al.   TISSUE ENGINEERING PART C-METHODS

Cell–matrix interactions and dynamic mechanical loading influence chondrocyte gene expression and bioactivity in PEG-RGD hydrogels

(2009) Idalis Villanueva et al.   Acta Biomaterialia

Synthesis of polycaprolactone: a review

(2009) Marianne Labet et al.   CHEMICAL SOCIETY REVIEWS

In Vitro Angiogenesis of 3D Tissue Engineered Adipose Tissue

(2009) Rui Yao et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Peroneal Nerve Regeneration Using a Unique Bilayer Polyurethane-collagen Guide Conduit

(2009) Xiahong Wang et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Controlled Adipose-derived Stromal Cells Differentiation into Adipose and Endothelial Cells in a 3D Structure Established by Cell-assembly Technique

(2009) Mingen Xu et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Rapid Prototyping a Double-layer Polyurethane—collagen Conduit and its Schwann Cell Compatibility

(2009) Tongkui Cui et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Gradient Hydrogel Construct Based on an Improved Cell Assembling System

(2009) Shengjie Li et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Cryopreservation of Cells in 3D Constructs Based on Controlled Cell Assembly Processes

(2009) Shaochun Sui et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing

(2009) Wei Wang et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

The evolution of rapid prototyping in dentistry: a review

(2009) Abbas Azari et al.   RAPID PROTOTYPING JOURNAL

Recent Trends and Challenges in Complex Organ Manufacturing

(2009) Xiaohong Wang et al.   TISSUE ENGINEERING PART B-REVIEWS

Synthesis and characterization of biodegradable elastomeric polyurethane scaffolds fabricated by the inkjet technique

(2008) Changhong Zhang et al.   BIOMATERIALS

Rapid Prototyping of Polyurethane for the Creation of Vascular Systems

(2008) Wei Xu et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

A Polyurethane-Gelatin Hybrid Construct for Manufacturing Implantable Bioartificial Livers

(2008) Wei Xu et al.   JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS

Blended PCL/PLGA scaffold fabrication using multi-head deposition system

(2008) Jong Young Kim et al.   MICROELECTRONIC ENGINEERING

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL

Rapid Prototyping of a Double-Layer Polyurethane–Collagen Conduit for Peripheral Nerve Regeneration

(2008) Tongkui Cui et al.   TISSUE ENGINEERING PART C-METHODS

Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

(2007) Rachel E. Saunders et al.   BIOMATERIALS

Biodegradable and thermoreversible hydrogels of poly(ethylene glycol)-poly(ε-caprolactone-co-glycolide)-poly(ethylene glycol) aqueous solutions

(2007) Zhiqiang Jiang et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Liver tissue responses to gelatin and gelatin/chitosan gels

(2007) Xiaohong Wang et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle- and Bone-Like Subpopulations

(2007) Julie A. Phillippi et al.   STEM CELLS