Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition

Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel

(2019) Anh Tuan Hoang   ENERGY

A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel

(2019) Anh Tuan Hoang et al.   FUEL

Assessment of impinged flame structure in high-pressure direct diesel injection

(2019) Zhihao Zhao et al.   International Journal of Engine Research

A Review of Early Injection Strategy in Premixed Combustion Engines

(2019) Xingyu Liang et al.   Applied Sciences-Basel

Influence of Fuel Injection Pressure on the Emissions Characteristics and Engine Performance in a CRDI Diesel Engine Fueled with Palm Biodiesel Blends

(2019) Sam Ki Yoon et al.   Energies

Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends

(2018) Jiaqiang E et al.   ENERGY

Performance of multi-cylinder diesel engine fueled with mahua biodiesel using Selective Catalytic Reduction (SCR) technique

(2018) M. Haridass et al.   Energy Sources Part A-Recovery Utilization and Environmental Effects

Effects of nano-additives on pollutants emission and engine performance in a urea-SCR equipped diesel engine fueled with blended-biodiesel

(2018) Mina Mehregan et al.   FUEL

The Lancet Countdown on health and climate change: from 25 years of inaction to a global transformation for public health

(2018) Nick Watts et al.   LANCET

Assessment on the consequences of injection timing and injection pressure on combustion characteristics of sustainable biodiesel fuelled engine

(2018) P. Mohamed Shameer et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Waste heat recovery from diesel engines based on Organic Rankine Cycle

(2018) Anh Tuan Hoang   APPLIED ENERGY

Impact of Jatropha Oil on Engine Performance, Emission Characteristics, Deposit Formation, and Lubricating Oil Degradation

(2018) Anh Tuan Hoang et al.   COMBUSTION SCIENCE AND TECHNOLOGY

A review on deposit formation in the injector of diesel engines running on biodiesel

(2018) Anh Tuan Hoang et al.   Energy Sources Part A-Recovery Utilization and Environmental Effects

Effects of a DOC+DPF system on emission characteristics of China Π engineering vehicle diesel engine and influence factors of trapping efficiency of PM for DOC+DPF system

(2018) Shushan Shao et al.   Energy Sources Part A-Recovery Utilization and Environmental Effects

Study of dual closed-loop control strategy of exhaust gas recirculation for diesel engines

(2018) Shengli Wei et al.   Energy Sources Part A-Recovery Utilization and Environmental Effects

Modeling diesel spray tip and tail penetrations after end-of-injection

(2018) Xinyi Zhou et al.   FUEL

Effect of split fuel injection and EGR on NOx and PM emission reduction in a low temperature combustion (LTC) mode diesel engine

(2017) Ayush Jain et al.   ENERGY

Fuel-Injection Strategy for PCCI Engine Fueled by Mineral Diesel and Biodiesel Blends

(2017) Akhilendra Pratap Singh et al.   ENERGY & FUELS

Effect of premixing ratio, injection timing and compression ratio on nano particle emissions from dual fuel non-road compression ignition engine fueled with gasoline/methanol (port injection) and diesel (direct injection)

(2017) Mohit Raj Saxena et al.   FUEL

Experimental investigations on the influence of fuel injection timing and pressure on single cylinder C.I. engine fueled with 20% blend of castor biodiesel in diesel

(2017) Akash Deep et al.   FUEL

Impacts of additives on performance and emission characteristics of diesel engines during steady state operation

(2017) Esmail Khalife et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Advances in rapid compression machine studies of low- and intermediate-temperature autoignition phenomena

(2017) S. Scott Goldsborough et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Review on the management of RCCI engines

(2017) Jing Li et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Combustion modeling in RCCI engines with a hybrid characteristic time combustion and closed reactor model

(2017) Dezhi Zhou et al.   APPLIED ENERGY

Effect of exhaust gas recirculation on advanced diesel combustion and alternate fuels - A review

(2016) J. Thangaraja et al.   APPLIED ENERGY

Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on fish oil biodiesel

(2016) Sakthivel Gnanasekaran et al.   ENERGY

Influence of fuel injection pressures on Calophyllum inophyllum methyl ester fuelled direct injection diesel engine

(2016) K. Nanthagopal et al.   ENERGY CONVERSION AND MANAGEMENT

Combustion performance and emission characteristics of a diesel engine under low-temperature combustion of pine oil–diesel blends

(2016) Haozhong Huang et al.   ENERGY CONVERSION AND MANAGEMENT

Impact of aromaticity and cetane number on the soot-NOx trade-off in conventional and low temperature combustion

(2016) Jos Reijnders et al.   FUEL

A review on natural gas/diesel dual fuel combustion, emissions and performance

(2016) Lijiang Wei et al.   FUEL PROCESSING TECHNOLOGY

Experimental and computational investigation of soot production from a premixed compression ignition engine using a load extension injection

(2016) Chaitanya Kavuri et al.   International Journal of Engine Research

Investigation into partially premixed combustion fueled with N-butanol-diesel blends

(2016) Xiaobei Cheng et al.   RENEWABLE ENERGY

Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics

(2015) Avinash Kumar Agarwal et al.   ENERGY CONVERSION AND MANAGEMENT

Particulate emissions from biodiesel fuelled CI engines

(2015) Avinash Kumar Agarwal et al.   ENERGY CONVERSION AND MANAGEMENT

Study of the control strategies on soot reduction under early-injection conditions on a diesel engine

(2015) Haifeng Liu et al.   FUEL

Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine

(2015) S. Imtenan et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Optimization of biodiesel fueled engine to meet emission standards through varying nozzle opening pressure and static injection timing

(2014) Balaji Mohan et al.   APPLIED ENERGY

Computational Analysis of the Extended Zeldovich Mechanism

(2014) Lucky Anetor et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Performance and emission characteristics of a diesel engine with varying injection pressure and fuelled with raw mahua oil (preheated and blends) and mahua oil methyl ester

(2014) Deepesh Sonar et al.   Clean Technologies and Environmental Policy

The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems

(2014) İbrahim Aslan Reşitoğlu et al.   Clean Technologies and Environmental Policy

Robust oxygen fraction estimation for conventional and premixed charge compression ignition engines with variable valve actuation

(2014) Lyle E. Kocher et al.   CONTROL ENGINEERING PRACTICE

Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review

(2014) S. Imtenan et al.   ENERGY CONVERSION AND MANAGEMENT

Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine

(2013) Avinash Kumar Agarwal et al.   FUEL

Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review

(2013) Balaji Mohan et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Effect of fuel injection pressure on the injection, combustion and performance characteristics of a DI diesel engine fueled with canola oil methyl esters-diesel fuel blends

(2012) Cenk Sayin et al.   BIOMASS & BIOENERGY

Effect of early injection strategy on spray atomization and emission reduction characteristics in bioethanol blended diesel fueled engine

(2012) Su Han Park et al.   ENERGY

Combined effect of injection timing and combustion chamber geometry on the performance of a biodiesel fueled diesel engine

(2012) S. Jaichandar et al.   ENERGY

Speciation of particulate matter and hydrocarbon emissions from biodiesel combustion and its reduction by aftertreatment

(2012) P. Rounce et al.   FUEL

Estimated health impact of a shift from light fuel to residential wood-burning in Upper Austria

(2012) Daniela Haluza et al.   Journal of Exposure Science and Environmental Epidemiology

Spray and combustion visualization of bio-diesel in a direct injection diesel engine

(2012) Jianfeng Pan et al.   Thermal Science

Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine

(2011) Robert Kiplimo et al.   APPLIED THERMAL ENGINEERING

Effect of Two-Stage Fuel Injection Parameters on NOx Reduction Characteristics in a DI Diesel Engine

(2011) Kyusoo Jeong et al.   Energies

Lung Cancer and Cardiovascular Disease Mortality Associated with Ambient Air Pollution and Cigarette Smoke: Shape of the Exposure–Response Relationships

(2011) C. Arden Pope et al.   ENVIRONMENTAL HEALTH PERSPECTIVES

The impact of fuel injection pressure on the exhaust emissions of a direct injection diesel engine fueled with biodiesel–diesel fuel blends

(2011) Metin Gumus et al.   FUEL

Effect of injector opening pressures on the performance, emission and combustion characteristics of DI diesel engine running on honne oil and diesel fuel blend

(2011) Krishnamurthy Belagur et al.   Thermal Science

Effect of Injection Pressure on the Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Methanol-blended Diesel Fuel

(2009) Mustafa Canakci et al.   ENERGY & FUELS

Effect of injection pressure on heat release rate and emissions in CI engine using orange skin powder diesel solution

(2009) K. Purushothaman et al.   ENERGY CONVERSION AND MANAGEMENT

Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine

(2008) Tiegang Fang et al.   FUEL