Quasi‐static and ratcheting properties of PEEK reinforced by carbon fibers under uniaxial and cyclic compression

Effect of fiber reinforcement and fabrication process on the dynamic compressive behavior of PEEK composites

(2019) Chunyang Chen et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Fractographic study of damage mechanisms in fiber reinforced polymer composites submitted to uniaxial compression

(2018) C.V. Opelt et al.   ENGINEERING FAILURE ANALYSIS

Long-term wear failure analysis of uhmwpe acetabular cup in total hip replacement

(2018) N. Shahemi et al.   Journal of the Mechanical Behavior of Biomedical Materials

Uniaxial and biaxial ratcheting behavior of ultra-high molecular weight polyethylene

(2018) Hong Gao et al.   Materials Science & Engineering C-Materials for Biological Applications

Influence of the load modelling during gait on the stress distribution in a femoral implant

(2018) Benjamin Gervais et al.   MULTIBODY SYSTEM DYNAMICS

Effects of thermal aging on uniaxial ratcheting behavior of vulcanised natural rubber

(2018) Zhe Zhang et al.   POLYMER TESTING

Ratcheting behavior of UHMWPE reinforced by carbon nanofibers (CNF) and hydroxyapatite (HA): Experiment and simulation

(2018) Jianhai Wang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Mechanical Properties and Cytotoxicity of Hierarchical Carbon Fiber-Reinforced Poly (ether-ether-ketone) Composites Used as Implant Materials

(2018) Wen Qin et al.   Journal of the Mechanical Behavior of Biomedical Materials

In vivo hip joint loads and pedal forces during ergometer cycling

(2017) P. Damm et al.   JOURNAL OF BIOMECHANICS

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking

(2017) Philipp Damm et al.   JOURNAL OF BIOMECHANICS

The Mechanical Properties and Modeling of Creep Behavior of UHMWPE/Nano-HA Composites

(2017) Fan Li et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Corrosion and surface modification on biocompatible metals: A review

(2017) R.I.M. Asri et al.   Materials Science & Engineering C-Materials for Biological Applications

Creep-ratcheting behavior of PTFE gaskets under various temperatures

(2017) Xiaotao Zheng et al.   POLYMER TESTING

Compressive ratcheting effect of expanded PTFE considering multiple load paths

(2017) X.T. Zheng et al.   POLYMER TESTING

Temperature-dependent ratcheting of PTFE gaskets under cyclic compressive loads with small stress amplitude

(2017) Xiaotao Zheng et al.   POLYMER TESTING

Advances in metals and alloys for joint replacement

(2017) Lenka Kunčická et al.   PROGRESS IN MATERIALS SCIENCE

In-plane biaxial ratcheting behavior of PVDF UF membrane

(2016) Gang Chen et al.   POLYMER TESTING

Investigation of mechanical impact behavior of short carbon-fiber-reinforced PEEK composites

(2015) D. Garcia-Gonzalez et al.   COMPOSITE STRUCTURES

Investigation of structure, mechanical and tribological properties of short carbon fiber reinforced UHMWPE-matrix composites

(2015) D.I. Chukov et al.   COMPOSITES PART B-ENGINEERING

Characterization and modeling of the strain rate sensitivity of polyetheretherketone’s compressive yield stress

(2015) Zakaria El-Qoubaa et al.   MATERIALS & DESIGN

Enhancement of osteogenesis on micro/nano-topographical carbon fiber-reinforced polyetheretherketone–nanohydroxyapatite biocomposite

(2015) Anxiu Xu et al.   Materials Science & Engineering C-Materials for Biological Applications

Reliability comparison between SAC305 joint and sintered nanosilver joint at high temperatures for power electronic packaging

(2014) Gang Chen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

A study of the wear performance in a hip simulator of a metal–metal Co–Cr alloy with different boron additions

(2013) M. Alvarez-Vera et al.   WEAR

Fatigue behavior and cyclic damage of peek short fiber reinforced composites

(2012) A. Avanzini et al.   COMPOSITES PART B-ENGINEERING

Electron microscopy investigation of interface between carbon fiber and ultra high molecular weight polyethylene

(2012) A.A. Stepashkin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Surface modification of carbon fibers and its effect on the fiber–matrix interaction of UHMWPE based composites

(2012) D.I. Chukov et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Carbon fiber reinforced PEEK Optima—A composite material biomechanical properties and wear/debris characteristics of CF-PEEK composites for orthopedic trauma implants

(2012) Ely L. Steinberg et al.   Journal of the Mechanical Behavior of Biomedical Materials

Composite based on polyetheretherketone reinforced with carbon fibres, an alternative to conventional materials for femoral implant: Manufacturing process and resulting structural behaviour

(2012) N. Boudeau et al.   MATERIALS & DESIGN

Graphitic Tribological Layers in Metal-on-Metal Hip Replacements

(2011) Y. Liao et al.   SCIENCE

Uniaxial ratcheting behavior of polytetrafluoroethylene at elevated temperature

(2010) Zhe Zhang et al.   POLYMER TESTING

Bioceramics of calcium orthophosphates

(2009) Sergey V. Dorozhkin   BIOMATERIALS

Multiaxial ratcheting behavior of PTFE at room temperature

(2009) Zhe Zhang et al.   POLYMER TESTING

The in vitro response of human osteoblasts to polyetheretherketone (PEEK) substrates compared to commercially pure titanium

(2008) Karen B. Sagomonyants et al.   BIOMATERIALS

Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials

(2008) S. C. Scholes et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Ti based biomaterials, the ultimate choice for orthopaedic implants – A review

(2008) M. Geetha et al.   PROGRESS IN MATERIALS SCIENCE

Finite element analysis of hip stem designs

(2007) David Bennett et al.   MATERIALS & DESIGN