Tailoring of Processing Parameters, Dendritic Microstructure, Si/Intermetallic Particles and Microhardness in As-cast and Heat-Treated Samples of Al7Si0.3Mg Alloy

Interconnection between the solidification and precipitation hardening processes of an AlSiCu alloy

(2019) Igor A. Magno et al.   MATERIALS SCIENCE AND TECHNOLOGY

Interactions between Fe-rich intermetallics and Mg-Si phase in Al-7Si-xMg alloys

(2019) Xiaoyan Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Holding Pressure on Microstructure and Mechanical Properties of A356 Aluminum Alloy

(2018) Xiaoyan Wu et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Microstructure and microhardness in horizontally solidified Al–7Si–0.15Fe–(3Cu; 0.3Mg) alloys

(2018) F. Souza et al.   MATERIALS SCIENCE AND TECHNOLOGY

Microstructural Development of an AlNiBi Alloy and Influence of the Transient Horizontal Solidification Parameters on Microhardness

(2018) Hugo M. Azevedo et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al–Cu–Ni Alloys

(2018) Adilson V. Rodrigues et al.   METALS AND MATERIALS INTERNATIONAL

Microstructural evolution during unsteady-state horizontal solidification of Al-Si-Mg (356) alloy

(2018) J.O. LIMA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Influence of Thermal Parameters, Microstructure, and Morphology of Si on Machinability of an Al–7.0 wt.% Si Alloy Directionally Solidified

(2018) Cássio A. P. Silva et al.   Advances in Materials Science and Engineering

Unsteady-State Horizontal Solidification of an Al–Si–Cu–Fe Alloy: Relationship Between Thermal Parameters and Microstructure with Mechanical Properties/Fracture Feature

(2018) Fabricio A. Souza et al.   METALS AND MATERIALS INTERNATIONAL

Cellular/dendritic transition, dendritic growth and microhardness in directionally solidified monophasic Sn-2%Sb alloy

(2018) O.L. ROCHA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

On an expression for the growth of secondary dendrite arm spacing during non-equilibrium solidification of multicomponent alloys: Validation against ternary aluminum-based alloys

(2018) Ivaldo L. Ferreira et al.   Journal of Manufacturing Processes

Relationship Between Aluminum-Rich/Intermetallic Phases and Microhardness of a Horizontally Solidified AlSiMgFe Alloy

(2018) Carolina Rizziolli Barbosa et al.   Materials Research-Ibero-american Journal of Materials

Horizontally Solidified Al–3 wt%Cu–(0.5 wt%Mg) Alloys: Tailoring Thermal Parameters, Microstructure, Microhardness, and Corrosion Behavior

(2018) André Barros et al.   Acta Metallurgica Sinica-English Letters

Effect of the T6 Heat Treatment on Microhardness of a Directionally Solidified Aluminum-Based 319 Alloy

(2017) Igor Alexsander Barbosa Magno et al.   Materials Research-Ibero-american Journal of Materials

Correlation of solidification microstructure refining scale, Mg composition and heat treatment conditions with mechanical properties in Al-7Si-Mg cast aluminum alloys

(2017) Rui Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural Evolution in AlMgSi Alloys during Solidification under Electromagnetic Stirring

(2017) Piotr Mikolajczak   Metals

Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al–Si–Cu alloy

(2016) Thiago A. Costa et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of heat treatment on the microstructures and mechanical properties of Al-5.5Zn-2.5Mg alloy

(2016) Emine Acer et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Measurements of microhardness during transient horizontal directional solidification of Al-Rich Al-Cu alloys: Effect of thermal parameters, primary dendrite arm spacing and Al2Cu intermetallic phase

(2015) André Santos Barros et al.   METALS AND MATERIALS INTERNATIONAL

Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys

(2015) Hailin Yang et al.   MATERIALS & DESIGN

Effects of iron on intermetallic compound formation in scandium modified Al–Si–Mg Alloys

(2014) Ussadawut Patakham et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Growth direction and Si alloying affecting directionally solidified structures of Al–Cu–Si alloys

(2014) T. A. Costa et al.   MATERIALS SCIENCE AND TECHNOLOGY

Solidification thermal parameters and dendritic growth during the horizontal directional solidification of Al-7wt.%Si alloy

(2014) Diego de Leon Brito Carvalho et al.   REM-Revista Escola de Minas

Effect of cooling rate on solidification parameters and microstructure of Al-7Si-0.3Mg-0.15Fe alloy

(2014) Rui CHEN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Characterization of the Al-3wt.%Si alloy in unsteady-state horizontal directional solidification

(2013) Diego Brito Carvalho et al.   Materials Research-Ibero-american Journal of Materials

Effect of solidification parameters on mechanical properties of directionally solidified Al-Rich Al-Cu alloys

(2013) Emin Çadırlı   METALS AND MATERIALS INTERNATIONAL

Effect of solution treatment and artificial aging on microstructure and mechanical properties of Al–Cu alloy

(2013) Jae-Ho JANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Improvement of the tensile properties of an Al–Si–Cu–Mg aluminum industrial alloy by using multi stage solution heat treatments

(2012) I. Aguilera Luna et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Aging behavior of 359-type Al–9%Si–0.5%Mg casting alloys

(2011) H. R. Ammar et al.   JOURNAL OF MATERIALS SCIENCE

The heat treatment of Al–Si–Cu–Mg casting alloys

(2010) Emma Sjölander et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of Mg, Fe, Be additions and solution heat treatment on the π-AlMgFeSi iron intermetallic phase in Al–7Si–Mg alloys

(2010) E. A. Elsharkawi et al.   JOURNAL OF MATERIALS SCIENCE

Response to artificial ageing of dendritic and globular Al–7Si–Mg alloys

(2009) Yucel Birol   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Fe intermetallics on the machinability of heat-treated Al–(7–11)% Si alloys

(2009) Y. Zedan et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Variation of microindentation hardness with solidification and microstructure parameters in the Al based alloys

(2008) H. Kaya et al.   APPLIED SURFACE SCIENCE

Impact behaviour of A356 alloy for low-pressure die casting automotive wheels

(2008) Mattia Merlin et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The effects of aging on machinability of 6061 aluminium alloy

(2008) Halil Demir et al.   MATERIALS & DESIGN