4.8 Article

Reactive Oxygen Species Generated by Cold Atmospheric Plasmas in Aqueous Solution: Successful Electrochemical Monitoring in Situ under a High Voltage System

Journal

ANALYTICAL CHEMISTRY
Volume 91, Issue 13, Pages 8002-8007

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acs.analchem.9b01912

Keywords

-

Funding

  1. Centre National de la Recherche Scientifique (CNRS)
  2. French Ministry of Research (MESR)
  3. Agence Nationale de la Recherche (ANR) [ANR-14-CE16-0007-01]
  4. Agence Nationale de la Recherche (ANR) [ANR-14-CE16-0007] Funding Source: Agence Nationale de la Recherche (ANR)

Ask authors/readers for more resources

Many investigations are dedicated to the detection and quantification of reactive oxygen and nitrogen species (RONS), particularly when generated in liquids exposed to cold atmospheric plasmas (CAPs). CAPs are partially ionized gases that can be obtained by applying a high electric field to a gas. A challenge is to get better insights on the plasma-liquid interactions in order to understand the induced effects on different targets (liquid, cells, tissues, etc.). As RONS are biochemically reactive, the difficulty lies in finding efficient methods to get both dynamic and quantitative data. Herein, we developed an innovative setup aimed at performing an in situ electrochemical monitoring of redox species generated by CAPs in a physiological buffer (PBS, pH 7.4). The challenge was to apply millivolt-potential variations and measure nanoampere Faradaic currents in the presence of ionization waves generated by micropulsed electric fields of some 10 kV.cm(-1) amplitude and ampere-transient currents. This was fulfilled by using dedicated working ultramicroelectrodes (Pt-black UMEs) and protecting them, as well as the reference and counter electrodes, within insulated-earthed containers. In this condition, we succeeded in performing both cyclic voltammetry and chronoamperometry in situ, with a resolution equivalent to working in a static solution (subnanoampere currents). Thus, we monitored the accumulation over time of species (H2O2, NO2-) generated by CAPs in PBS and observed the mean dynamic of RONS chemistry during and after plasma exposition, particularly through the detection of a short-living species.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.8
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

Article Chemistry, Multidisciplinary

Direct Visualization of Nanoconfinement Effect on Nanoreactor via Electrochemiluminescence Microscopy

Xuedong Huang, Binxiao Li, Yanwei Lu, Yixin Liu, Shurong Wang, Neso Sojic, Dechen Jiang, Baohong Liu

Summary: Nanoconfinement in mesoporous nanoarchitectures can significantly influence molecular transport and reaction kinetics in electrochemical processes. A comprehensive understanding of nanoconfinement and mass transport is crucial for practical applications, but a proper approach to study it is currently lacking. In this work, we present a single nanoreactor electrochemiluminescence (SNECL) microscopy technique that utilizes Ru(bpy)(3)(2+)-loaded mesoporous silica nanoparticles to directly visualize and investigate the nanoconfinement-enhanced electrochemical reactions at the single molecule level. Additionally, we monitor and simulate the mass transport capability of single nanoreactors with high spatial resolution through analysis of decay time and recovery ability. The nanoconfinement effects in our system also enable the imaging of single proteins on cellular membranes. This SNECL approach could serve as a promising tool for unraveling the nanoconfinement effects during electrochemical processes and bridging the gap between mesoporous nanoarchitectures and potential electrochemical applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Multidisciplinary

Wireless Electronic Light Emission: An Introduction to Bipolar Electrochemistry

Anne de Poulpiquet, Neso Sojic, Laurent Bouffier, Alexander Kuhn, Dodzi Zigah

Summary: Electrochemistry is an important topic taught in undergraduate chemistry programs, but students often find it difficult due to the combination of various physical concepts involved. Bipolar electrochemistry is of special interest for teaching purposes, as it has a simple setup and allows for the tuning of electrochemical reactions through manipulating the electric field. Basic experiments using a commercially available light emitting diode (LED) as a bipolar electrode are introduced here, illustrating the key parameters driving electrochemical reactions and providing an eye-catching introduction to general electrochemistry.

JOURNAL OF CHEMICAL EDUCATION (2023)

Article Chemistry, Physical

Enzymatic cascade reaction in simple-coacervates

Ritu Toor, Lysandre Hourdin, Sharvina Shanmugathasan, Pauline Lefrancois, Stephane Arbault, Veronique Lapeyre, Laurent Bouffier, Jean-Paul Douliez, Valerie Ravaine, Adeline Perro

Summary: The design of enzymatic droplet-sized reactors is an important challenge with potential applications in medical diagnostics, water purification, bioengineering, and the food industry. This study demonstrates the construction of enzymatic reactors using coacervates formed by ampholyte polymer chains stabilized with agar. The coacervates can sequester and preserve the catalytic activity of enzymes such as glucose oxidase and catalase. The study investigates the enzymatic cascade reaction within the coacervates and provides new insights into the impact of proximity and confinement on enzymatic activity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Article Chemistry, Multidisciplinary

Electrochemiluminescence Amplification in Bead-Based Assays Induced by a Freely Diffusing Iridium(III) Complex

Emily Kerr, Sara Knezevic, Paul S. Francis, Conor F. Hogan, Giovanni Valenti, Francesco Paolucci, Frederic Kanoufi, Neso Sojic

Summary: In this study, a novel approach to enhancing conventional heterogeneous electrochemiluminescence (ECL) assays is proposed by incorporating a second metal coordination complex, [Ir(sppy)3]3-. ECL microscopy is used to map the spatial distribution of ECL emission from [Ru(bpy)3]2+ labels on the surface of a bead and solution-phase emission from [Ir(sppy)3]3-. The developed [Ir(sppy)3]3--mediated enhancement approach significantly improves the ECL signal from [Ru(bpy)3]2+ labels immobilized on a polystyrene bead, with a 70.9-fold increase at 0.9 V and a 2.9-fold increase at 1.2 V vs Ag/AgCl. This enhancement has important implications for improving existing ECL assays and ECL-based microscopy.

ACS SENSORS (2023)

Article Electrochemistry

Upconversion photoinduced electrochemiluminescence of luminol-H2O2 at Si/SiOx/Ni photoanodes

Yiran Zhao, Julie Descamps, Yoan Leger, Lionel Santinacci, Sandrine Zanna, Neso Sojic, Gabriel Loget

Summary: n-Si/SiOx/Ni photoanodes were studied for upconversion photoinduced electrochemiluminescence (PECL) in a 3-aminophthalhydrazide (luminol)-hydrogen peroxide (H2O2) model electrochemiluminescent (ECL) system at pH 13. The photoanode exhibited PECL emission at 440 nm when excited at 850 nm, showing an anti-Stokes shift of -410 nm at biases above 0 V vs Ag/AgCl. The alkaline pH value of the electrolyte prevented Ni dissolution, resulting in a longer active period (several hours) compared to similar photoanodes operating at neutral pH.

ELECTROCHIMICA ACTA (2023)

Review Biochemical Research Methods

Tris(2,2'-bipyridyl)ruthenium (II) complex as a universal reagent for the fabrication of heterogeneous electrochemiluminescence platforms and its recent analytical applications

Mathavan Sornambigai, Laurent Bouffier, Neso Sojic, Shanmugam Senthil Kumar

Summary: In recent years, electrochemiluminescence (ECL) has become a highly successful tool in analytical science, with a focus on solid-state ECL for its enhanced electron transfer kinetics and rapid response time. The key element in ECL is the luminophore, with Ru(bpy)(3)(2+) being the gold-standard in ECL. This review provides insights into the principles of ECL and classical reaction mechanisms, as well as fabrication methods and the importance of solid-state ECL over solution-phase ECL. It also discusses emerging technologies and potential applications of solid-state ECL, along with recent advances in hyphenated techniques.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2023)

Article Electrochemistry

Resistance measurements for the wireless evaluation of electrocatalytic activity

Tommaso Nicolini, Youness Boukarkour, Stephane Reculusa, Neso Sojic, Alexander Kuhn, Gerardo Salinas

Summary: Electrochemical water-splitting is essential for storing energy from sustainable sources. This study introduces a novel method based on bipolar electrochemistry, using a conducting polymer layer as a variable-resistance switch to evaluate the electrocatalytic activity of electrode materials for hydrogen and oxygen evolution. The method was validated for Au, Pt, and Ni surfaces, with the results in agreement with classical electrochemical methods. This work provides an easy and straightforward approach for assessing the electrocatalytic activity of electrode materials in water-splitting.

ELECTROCHIMICA ACTA (2023)

Article Electrochemistry

Light-emitting bipolar electrochemistry: a straightforward way to illustrate thermodynamic aspects to students

Gerardo Salinas, Laurent Bouffier, Neso Sojic, Alexander Kuhn

Summary: Thermodynamics is an intriguing aspect of physical chemistry that is involved in various natural phenomena. The spontaneity of a chemical reaction is directly related to fundamental thermodynamic parameters such as the Gibbs free energy change. The visualization of electromotive force allows students to understand the underlying concepts of spontaneity in coupled reactions. This study introduces the thermodynamic concept of spontaneity to undergraduate students using the concepts of endogenous and exogenous bipolar electrochemistry. By encoding the chemical information of two coupled reactions through the light emission of a light-emitting diode used as a bipolar electrode, the thermodynamic information of the involved redox reactions can be directly read out.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2023)

Article Chemistry, Multidisciplinary

All-Optical Electrochemiluminescence

Yiran Zhao, Julie Descamps, Nour al Hoda Al Bast, Marcos Duque, Jaume Esteve, Borja Sepulveda, Gabriel Loget, Neso Sojic

Summary: A new all-optical strategy for electrochemiluminescence (ECL) is reported, which eliminates the need for an external power supply and electrical wires. The fully integrated all-optical wireless device utilizes a modified nanostructured Si photovoltaic junction to induce ECL emission under illumination. This breakthrough opens up new opportunities for developing portable sensing devices.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2023)

Review Chemistry, Physical

Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants

Milica Sentic, Ivana Trajkovic, Dragan Manojlovic, Dalibor Stankovic, Maria Vesna Nikolic, Neso Sojic, Jasmina Vidic

Summary: This review presents the application of metal-organic frameworks (MOFs) in electrochemiluminescent (ECL) sensing for water pollutant detection. MOF composites enable the sensitive monitoring of common emerging contaminants such as heavy metals, volatile organic compounds, pharmaceuticals, industrial chemicals, and cyanotoxins.

MATERIALS (2023)

Article Chemistry, Multidisciplinary

Off-Grid Electrogenerated Chemiluminescence with Customized p-i-n Photodiodes

Yiran Zhao, Yoan Leger, Julie Descamps, Neso Sojic, Gabriel Loget

Summary: This study develops an all-optical electrochemiluminescence (AO-ECL) system that uses small and cheap photodiodes and ECL-active and catalytic materials to generate ECL by illuminating photoelectrochemical devices in the electrolyte. These low-cost off-grid AO-ECL devices offer opportunities for remote photodetection and portable bioanalytical tools.

SMALL (2023)

Article Chemistry, Multidisciplinary

Endogenous and exogenous wireless multimodal light-emitting chemical devices

Miaoxia Liu, Gerardo Salinas, Jing Yu, Antoine Cornet, Haidong Li, Alexander Kuhn, Neso Sojic

Summary: Multimodal imaging is a powerful approach that integrates multiple optical modalities in a single device, with potential applications in various fields. In this study, we developed wireless multimodal light-emitting chemical systems by coupling two light sources based on different physical principles. The results provide a novel alternative for designing autonomous hybrid systems with multimodal and multicolor optical readouts for complex bio-chemical systems.

CHEMICAL SCIENCE (2023)

Article Chemistry, Multidisciplinary

Local reactivity of metal-insulator-semiconductor photoanodes imaged by photoinduced electrochemiluminescence microscopy

Julie Descamps, Yiran Zhao, Julie Le-Pouliquen, Bertrand Goudeau, Patrick Garrigue, Karine Tavernier, Yoan Leger, Gabriel Loget, Neso Sojic

Summary: Localized photoinduced electrochemiluminescence (PECL) was studied on photoanodes composed of Ir microbands on n-Si/SiOx. The results demonstrated that PECL microscopy accurately imaged the hole-driven heterogeneous photoelectrochemical reactivity. This method shows promise in elucidating the local activity of photoelectrodes used in solar energy conversion.

CHEMICAL COMMUNICATIONS (2023)

Article Chemistry, Physical

Tuning the bis-hydrophilic balance of microgels: A tool to control the stability of water-in-water emulsions

Lea Waldmann, Do-Nhu-Trang Nguyen, Stephane Arbault, Taco Nicolai, Lazhar Benyahia, Valerie Ravaine

Summary: This study investigates the influence of the bis-hydrophilic balance on the stability of emulsions formed by mixing incompatible polymers. It is found that emulsions stabilized by bis-hydrophilic soft microgels containing 50%wt of Dex exhibit the highest stability. The thermo-responsiveness of the microgels also affects the stability of the emulsions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2024)

Article Biochemistry & Molecular Biology

Easy cleaning plus stable activation of glassy carbon electrode surface by oxygen plasma

Camille Colin, Pierre Levallois, Ugo Botsos-Margerit, Franck Clement, Dodzi Zigah, Stephane Arbault

Summary: It was found that using oxygen plasma exposure can replace traditional polishing procedures for GC electrodes, improving their cyclic voltammetry response and making it close to theoretical values. The plasma effects on the electrodes remained stable for about a week when stored in water, attributed to increased surface energy and hydrophilicity. Additionally, the plasma treatment can remove surface blockades on the electrodes.

BIOELECTROCHEMISTRY (2023)

No Data Available