- Home
- Publications
- Publication Search
- Publication Details
Title
A Review on Micropitting Studies of Steel Gears
Authors
Keywords
-
Journal
Coatings
Volume 9, Issue 1, Pages 42
Publisher
MDPI AG
Online
2019-01-15
DOI
10.3390/coatings9010042
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of sliding conditions on micropitting behaviour of AISI 304 stainless steel in chloride containing solution
- (2018) Y. Sun et al. CORROSION SCIENCE
- A comparison of rolling contact fatigue behaviour of 17NiCrMo6-4 case-hardened disc specimens and gears
- (2018) A. Terrin et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A numerical study on the contact fatigue life of a coated gear pair under EHL
- (2018) Ye Zhou et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effects of rack-cutter parabolic modification on loaded contact characteristics for crossed beveloid gears with misalignments
- (2018) Gaoxiang Ni et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Evaluation of Contact Fatigue Life of a Wind Turbine Gear Pair Considering Residual Stress
- (2018) Heli Liu et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- An Experimental Study of Influence of Lubrication Methods on Efficiency and Contact Fatigue Life of Spur Gears
- (2018) J. Moss et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Effects of tooth modifications on mesh characteristics of crossed beveloid gear pair with small shaft angle
- (2018) Siyuan Liu et al. MECHANISM AND MACHINE THEORY
- Concave modifications of tooth surfaces of beveloid gears with crossed axes
- (2018) Siyuan Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Effect of slide to roll ratio on the micropitting behaviour in rolling-sliding contacts lubricated with ZDDP-containing lubricants
- (2018) Hui Cen et al. TRIBOLOGY INTERNATIONAL
- A new damage-mechanics-based model for rolling contact fatigue analysis of cylindrical roller bearing
- (2018) Fukai Li et al. TRIBOLOGY INTERNATIONAL
- Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear
- (2018) G.E. Morales-Espejel et al. WEAR
- Study of microstructural degradation of a failed pinion gear at a cement plant
- (2018) V. Rajinikanth et al. ENGINEERING FAILURE ANALYSIS
- Micro-pitting and wear assessment of engine oils operating under boundary lubrication conditions
- (2018) A. Vrcek et al. TRIBOLOGY INTERNATIONAL
- Experimental and Numerical Study of Micropitting Initiation in Real Rough Surfaces in a Micro-elastohydrodynamic Lubrication Regime
- (2018) M. F. AL-Mayali et al. TRIBOLOGY LETTERS
- The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears
- (2018) D. Mallipeddi et al. TRIBOLOGY INTERNATIONAL
- Simulation of fatigue failure on tooth flanks in consideration of pitting initiation and growth
- (2018) Max Weibring et al. TRIBOLOGY INTERNATIONAL
- Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria
- (2018) Wei Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effects of microstructure on rolling contact fatigue of a wind turbine gear based on crystal plasticity modeling
- (2018) Wei Wang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Experimental analysis of contact fatigue damage in case hardened gears for off-highway axles
- (2017) A. Terrin et al. ENGINEERING FAILURE ANALYSIS
- Investigation on the flank surface durability of gears with increased pressure angle
- (2017) Christian Weber et al. FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH
- Influence of water contamination in gear lubricants on wear and micro-pitting performance of case carburized gears
- (2017) Christian Engelhardt et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- New Approach for Prediction of Non-Conformal Contact Fatigue Life Considering Lubrication Performance Parameters
- (2017) S. C. An et al. Journal of Friction and Wear
- Influence of running-in on surface characteristics of efficiency tested ground gears
- (2017) D. Mallipeddi et al. TRIBOLOGY INTERNATIONAL
- Investigation of lubricated rolling sliding behaviour of WC/C, WC/C-CrN, DLC based coatings and plasma nitriding of steel for possible use in worm gearing
- (2017) Matteo Benedetti et al. WEAR
- Effects of ultrasonic nanocrystal surface modification on the wear and micropitting behavior of bearing steel in boundary lubricated steel-steel contacts
- (2017) Haifeng Qin et al. WEAR
- Optimizing Gear Performance by Alloy Modification of Carburizing Steels
- (2017) Thomas Tobie et al. Metals
- Oil film stiffness and damping in an elastohydrodynamic lubrication line contact-vibration
- (2016) Yuanyuan Zhang et al. Journal of Mechanical Science and Technology
- Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts
- (2016) Siavash Soltanahmadi et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- The influence of carbon based coatings and surface finish on the tribological performance in high-load contacts
- (2016) H. Ronkainen et al. TRIBOLOGY INTERNATIONAL
- Starved lubrication of a spur gear pair
- (2016) Huaiju Liu et al. TRIBOLOGY INTERNATIONAL
- Fatigue resistant carbon coatings for rolling/sliding contacts
- (2016) Harpal Singh et al. TRIBOLOGY INTERNATIONAL
- Running-in and micropitting behaviour of steel surfaces under mixed lubrication conditions
- (2016) A. Clarke et al. TRIBOLOGY INTERNATIONAL
- Understanding micropitting in gears
- (2015) A Clarke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Influence of grain boundary cementite induced by gas nitriding on the rolling contact fatigue of alloyed steels for gears
- (2015) Marion Le et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Prediction of micropitting life in spur gears operating under mixed-lubrication regime using load-sharing concept
- (2015) Hamid Moallem et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Roughness evolution in mixed lubrication condition due to mild wear
- (2015) GE Morales-Espejel et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- An Investigation on the Influence of Misalignment on Micro-pitting of a Spur Gear Pair
- (2015) Sheng Li TRIBOLOGY LETTERS
- The Progression of Surface Rolling Contact Fatigue Damage of Rolling Bearings with Artificial Dents
- (2015) G. E. Morales-Espejel et al. TRIBOLOGY TRANSACTIONS
- An approach to the simulation of concurrent gear micropitting and mild wear
- (2015) José A. Brandão et al. WEAR
- Analysis of the effect of different types of additives added to a low viscosity polyalphaolefin base on micropitting
- (2015) E. de la Guerra Ochoa et al. WEAR
- Experimental and analytical study of gear micropitting initiation and propagation under varying loading conditions
- (2015) I.S. Al-Tubi et al. WEAR
- A Computational Study on the Influence of Surface Roughness Lay Directionality on Micropitting of Lubricated Point Contacts
- (2014) Sheng Li JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Calculation of gear tooth flank surface wear during an FZG micropitting test
- (2014) José A. Brandão et al. WEAR
- A micro-pitting model for spur gear contacts
- (2013) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Precision Finishing of Bevel Gears by Electrochemical Honing
- (2013) J. H. Shaikh et al. MATERIALS AND MANUFACTURING PROCESSES
- Rolling Contact Fatigue: Experimental Study of the Influence of Sliding, Load, and Material Properties on the Resistance to Micropitting of Steel Discs
- (2013) Pierre Rabaso et al. TRIBOLOGY TRANSACTIONS
- Micropitting Performance of Oil Additives in Lubricated Rolling Contacts
- (2013) V. Brizmer et al. TRIBOLOGY TRANSACTIONS
- A physics-based model to predict micro-pitting lives of lubricated point contacts
- (2012) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears
- (2012) H. P. Evans et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Effect of as-ground surface and the BALINIT® C and Nb–S coatings on contact fatigue damage in gears
- (2012) V. Moorthy et al. TRIBOLOGY INTERNATIONAL
- An observation on the initiation of micro-pitting damage in as-ground and coated gears during contact fatigue
- (2012) V. Moorthy et al. WEAR
- Rolling‐sliding, scuffing and tribocorrosion behaviour of PVD multilayer coatings for gears application
- (2011) Raquel Bayón et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Evolution of tooth flank roughness during gear micropitting tests
- (2011) Ramiro Martins et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Micropitting Damage Mechanism on Hardened and Tempered, Nitrided, and Carburizing Steels
- (2011) Fabrizio D'Errico MATERIALS AND MANUFACTURING PROCESSES
- A model for the simulation of the interactions between dynamic tooth loads and contact fatigue in spur gears
- (2011) T. Osman et al. TRIBOLOGY INTERNATIONAL
- Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling Bearings
- (2011) G. E. Morales-Espejel et al. TRIBOLOGY TRANSACTIONS
- Contact fatigue performance of helical gears with surface coatings
- (2011) V. Moorthy et al. WEAR
- Influence of Shot Peening Process on Contact Fatigue Behavior of Gears
- (2009) Inés Fernández Pariente et al. MATERIALS AND MANUFACTURING PROCESSES
- The Effect of a Friction Modifier Additive on Micropitting
- (2009) E. Lainé et al. TRIBOLOGY TRANSACTIONS
- Surface initiated tooth flank damage
- (2009) José A. Brandão et al. WEAR
- Surface initiated tooth flank damage. Part II: Prediction of micropitting initiation and mass loss
- (2009) José A. Brandão et al. WEAR
- Gear finishing by abrasive processes
- (2008) B. Karpuschewski et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Contact fatigue damage analysis of shot peened gears by means of X-ray measurements
- (2008) Inés Fernández Pariente et al. ENGINEERING FAILURE ANALYSIS
- Micropitting performance of mineral and biodegradable ester gear oils
- (2008) Ramiro Martins et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effect of lubricants on micropitting and wear
- (2008) E. Lainé et al. TRIBOLOGY INTERNATIONAL
- Micropitting performance of nitrided steel gears lubricated with mineral and ester oils
- (2008) N.F.R. Cardoso et al. TRIBOLOGY INTERNATIONAL
- Influence of low friction coatings on the scuffing load capacity and efficiency of gears
- (2007) R. Martins et al. TRIBOLOGY INTERNATIONAL
- Austempered ductile iron (ADI) gears: Power loss, pitting and micropitting
- (2007) R. Martins et al. WEAR
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started