标题
A Review on Micropitting Studies of Steel Gears
作者
关键词
-
出版物
Coatings
Volume 9, Issue 1, Pages 42
出版商
MDPI AG
发表日期
2019-01-15
DOI
10.3390/coatings9010042
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of sliding conditions on micropitting behaviour of AISI 304 stainless steel in chloride containing solution
- (2018) Y. Sun et al. CORROSION SCIENCE
- A comparison of rolling contact fatigue behaviour of 17NiCrMo6-4 case-hardened disc specimens and gears
- (2018) A. Terrin et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A numerical study on the contact fatigue life of a coated gear pair under EHL
- (2018) Ye Zhou et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effects of rack-cutter parabolic modification on loaded contact characteristics for crossed beveloid gears with misalignments
- (2018) Gaoxiang Ni et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Evaluation of Contact Fatigue Life of a Wind Turbine Gear Pair Considering Residual Stress
- (2018) Heli Liu et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- An Experimental Study of Influence of Lubrication Methods on Efficiency and Contact Fatigue Life of Spur Gears
- (2018) J. Moss et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Effects of tooth modifications on mesh characteristics of crossed beveloid gear pair with small shaft angle
- (2018) Siyuan Liu et al. MECHANISM AND MACHINE THEORY
- Concave modifications of tooth surfaces of beveloid gears with crossed axes
- (2018) Siyuan Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Effect of slide to roll ratio on the micropitting behaviour in rolling-sliding contacts lubricated with ZDDP-containing lubricants
- (2018) Hui Cen et al. TRIBOLOGY INTERNATIONAL
- A new damage-mechanics-based model for rolling contact fatigue analysis of cylindrical roller bearing
- (2018) Fukai Li et al. TRIBOLOGY INTERNATIONAL
- Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear
- (2018) G.E. Morales-Espejel et al. WEAR
- Study of microstructural degradation of a failed pinion gear at a cement plant
- (2018) V. Rajinikanth et al. ENGINEERING FAILURE ANALYSIS
- Micro-pitting and wear assessment of engine oils operating under boundary lubrication conditions
- (2018) A. Vrcek et al. TRIBOLOGY INTERNATIONAL
- Experimental and Numerical Study of Micropitting Initiation in Real Rough Surfaces in a Micro-elastohydrodynamic Lubrication Regime
- (2018) M. F. AL-Mayali et al. TRIBOLOGY LETTERS
- The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears
- (2018) D. Mallipeddi et al. TRIBOLOGY INTERNATIONAL
- Simulation of fatigue failure on tooth flanks in consideration of pitting initiation and growth
- (2018) Max Weibring et al. TRIBOLOGY INTERNATIONAL
- Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria
- (2018) Wei Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effects of microstructure on rolling contact fatigue of a wind turbine gear based on crystal plasticity modeling
- (2018) Wei Wang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Experimental analysis of contact fatigue damage in case hardened gears for off-highway axles
- (2017) A. Terrin et al. ENGINEERING FAILURE ANALYSIS
- Investigation on the flank surface durability of gears with increased pressure angle
- (2017) Christian Weber et al. FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH
- Influence of water contamination in gear lubricants on wear and micro-pitting performance of case carburized gears
- (2017) Christian Engelhardt et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- New Approach for Prediction of Non-Conformal Contact Fatigue Life Considering Lubrication Performance Parameters
- (2017) S. C. An et al. Journal of Friction and Wear
- Influence of running-in on surface characteristics of efficiency tested ground gears
- (2017) D. Mallipeddi et al. TRIBOLOGY INTERNATIONAL
- Investigation of lubricated rolling sliding behaviour of WC/C, WC/C-CrN, DLC based coatings and plasma nitriding of steel for possible use in worm gearing
- (2017) Matteo Benedetti et al. WEAR
- Effects of ultrasonic nanocrystal surface modification on the wear and micropitting behavior of bearing steel in boundary lubricated steel-steel contacts
- (2017) Haifeng Qin et al. WEAR
- Optimizing Gear Performance by Alloy Modification of Carburizing Steels
- (2017) Thomas Tobie et al. Metals
- Oil film stiffness and damping in an elastohydrodynamic lubrication line contact-vibration
- (2016) Yuanyuan Zhang et al. Journal of Mechanical Science and Technology
- Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts
- (2016) Siavash Soltanahmadi et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- The influence of carbon based coatings and surface finish on the tribological performance in high-load contacts
- (2016) H. Ronkainen et al. TRIBOLOGY INTERNATIONAL
- Starved lubrication of a spur gear pair
- (2016) Huaiju Liu et al. TRIBOLOGY INTERNATIONAL
- Fatigue resistant carbon coatings for rolling/sliding contacts
- (2016) Harpal Singh et al. TRIBOLOGY INTERNATIONAL
- Running-in and micropitting behaviour of steel surfaces under mixed lubrication conditions
- (2016) A. Clarke et al. TRIBOLOGY INTERNATIONAL
- Understanding micropitting in gears
- (2015) A Clarke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Influence of grain boundary cementite induced by gas nitriding on the rolling contact fatigue of alloyed steels for gears
- (2015) Marion Le et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Prediction of micropitting life in spur gears operating under mixed-lubrication regime using load-sharing concept
- (2015) Hamid Moallem et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Roughness evolution in mixed lubrication condition due to mild wear
- (2015) GE Morales-Espejel et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- An Investigation on the Influence of Misalignment on Micro-pitting of a Spur Gear Pair
- (2015) Sheng Li TRIBOLOGY LETTERS
- The Progression of Surface Rolling Contact Fatigue Damage of Rolling Bearings with Artificial Dents
- (2015) G. E. Morales-Espejel et al. TRIBOLOGY TRANSACTIONS
- An approach to the simulation of concurrent gear micropitting and mild wear
- (2015) José A. Brandão et al. WEAR
- Analysis of the effect of different types of additives added to a low viscosity polyalphaolefin base on micropitting
- (2015) E. de la Guerra Ochoa et al. WEAR
- Experimental and analytical study of gear micropitting initiation and propagation under varying loading conditions
- (2015) I.S. Al-Tubi et al. WEAR
- A Computational Study on the Influence of Surface Roughness Lay Directionality on Micropitting of Lubricated Point Contacts
- (2014) Sheng Li JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Calculation of gear tooth flank surface wear during an FZG micropitting test
- (2014) José A. Brandão et al. WEAR
- A micro-pitting model for spur gear contacts
- (2013) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Precision Finishing of Bevel Gears by Electrochemical Honing
- (2013) J. H. Shaikh et al. MATERIALS AND MANUFACTURING PROCESSES
- Rolling Contact Fatigue: Experimental Study of the Influence of Sliding, Load, and Material Properties on the Resistance to Micropitting of Steel Discs
- (2013) Pierre Rabaso et al. TRIBOLOGY TRANSACTIONS
- Micropitting Performance of Oil Additives in Lubricated Rolling Contacts
- (2013) V. Brizmer et al. TRIBOLOGY TRANSACTIONS
- A physics-based model to predict micro-pitting lives of lubricated point contacts
- (2012) Sheng Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears
- (2012) H. P. Evans et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Effect of as-ground surface and the BALINIT® C and Nb–S coatings on contact fatigue damage in gears
- (2012) V. Moorthy et al. TRIBOLOGY INTERNATIONAL
- An observation on the initiation of micro-pitting damage in as-ground and coated gears during contact fatigue
- (2012) V. Moorthy et al. WEAR
- Rolling‐sliding, scuffing and tribocorrosion behaviour of PVD multilayer coatings for gears application
- (2011) Raquel Bayón et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Evolution of tooth flank roughness during gear micropitting tests
- (2011) Ramiro Martins et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Micropitting Damage Mechanism on Hardened and Tempered, Nitrided, and Carburizing Steels
- (2011) Fabrizio D'Errico MATERIALS AND MANUFACTURING PROCESSES
- A model for the simulation of the interactions between dynamic tooth loads and contact fatigue in spur gears
- (2011) T. Osman et al. TRIBOLOGY INTERNATIONAL
- Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling Bearings
- (2011) G. E. Morales-Espejel et al. TRIBOLOGY TRANSACTIONS
- Contact fatigue performance of helical gears with surface coatings
- (2011) V. Moorthy et al. WEAR
- Influence of Shot Peening Process on Contact Fatigue Behavior of Gears
- (2009) Inés Fernández Pariente et al. MATERIALS AND MANUFACTURING PROCESSES
- The Effect of a Friction Modifier Additive on Micropitting
- (2009) E. Lainé et al. TRIBOLOGY TRANSACTIONS
- Surface initiated tooth flank damage
- (2009) José A. Brandão et al. WEAR
- Surface initiated tooth flank damage. Part II: Prediction of micropitting initiation and mass loss
- (2009) José A. Brandão et al. WEAR
- Gear finishing by abrasive processes
- (2008) B. Karpuschewski et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Contact fatigue damage analysis of shot peened gears by means of X-ray measurements
- (2008) Inés Fernández Pariente et al. ENGINEERING FAILURE ANALYSIS
- Micropitting performance of mineral and biodegradable ester gear oils
- (2008) Ramiro Martins et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Effect of lubricants on micropitting and wear
- (2008) E. Lainé et al. TRIBOLOGY INTERNATIONAL
- Micropitting performance of nitrided steel gears lubricated with mineral and ester oils
- (2008) N.F.R. Cardoso et al. TRIBOLOGY INTERNATIONAL
- Influence of low friction coatings on the scuffing load capacity and efficiency of gears
- (2007) R. Martins et al. TRIBOLOGY INTERNATIONAL
- Austempered ductile iron (ADI) gears: Power loss, pitting and micropitting
- (2007) R. Martins et al. WEAR
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now