- Home
- Publications
- Publication Search
- Publication Details
Title
The Hardness of Additively Manufactured Alloys
Authors
Keywords
-
Journal
Materials
Volume 11, Issue 11, Pages 2070
Publisher
MDPI AG
Online
2018-10-24
DOI
10.3390/ma11112070
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
- (2018) Fan Zhang et al. ACTA MATERIALIA
- A Review of Metal Fabricated with Laser- and Powder-Bed Based Additive Manufacturing Techniques: Process, Nomenclature, Materials, Achievable Properties, and its Utilization in the Medical Sector
- (2018) Leonhard Hitzler et al. ADVANCED ENGINEERING MATERIALS
- Metal Alloys for Fusion-Based Additive Manufacturing
- (2018) Duyao Zhang et al. ADVANCED ENGINEERING MATERIALS
- Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
- (2018) H. Shipley et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
- (2018) Fei Cao et al. JOM
- Impact of iron composition on the properties of an additively manufactured solid solution strengthened nickel base alloy
- (2018) Z.R. Khayat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the toughness scatter in low alloy C-Mn steel samples fabricated using wire arc additive manufacturing
- (2018) Niyanth Sridharan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting
- (2018) Yung Suk Jeremy Yoo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
- (2018) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium
- (2018) K. S. Derekar MATERIALS SCIENCE AND TECHNOLOGY
- Strengths and Microstructure of SUS316L Fabricated by Selective Laser Melting
- (2018) Kazuki Akino et al. MATERIALS TRANSACTIONS
- Impact of Defects in Powder Feedstock Materials on Microstructure of 304L and 316L Stainless Steel Produced by Additive Manufacturing
- (2018) Benjamin M. Morrow et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Signatures of the unique microstructure of additively manufactured steel observed via diffraction
- (2018) R. Pokharel et al. SCRIPTA MATERIALIA
- A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
- (2018) Dylan Agius et al. Metals
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
- (2018) J.S. Zuback et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Dimensionless numbers in additive manufacturing
- (2017) T. Mukherjee et al. JOURNAL OF APPLIED PHYSICS
- Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
- (2017) O. Hentschel et al. JOURNAL OF LASER APPLICATIONS
- Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding
- (2017) Kai Feng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Interfacial phenomena and characteristics between the deposited material and substrate in selective laser melting Inconel 625
- (2017) C. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
- (2017) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of strength-hardness relationships in additively manufactured titanium alloys
- (2017) Jayme S. Keist et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts
- (2017) Hongyu Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
- (2017) Haize Galarraga et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
- (2017) Mingming Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
- (2017) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser additive manufacturing of M2 high-speed steel
- (2017) Min Zhang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Influence of energy density on metallurgy and properties in metal additive manufacturing
- (2017) Shahir M. Yusuf et al. MATERIALS SCIENCE AND TECHNOLOGY
- Impact of Interlayer Dwell Time on Microstructure and Mechanical Properties of Nickel and Titanium Alloys
- (2017) B. K. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting
- (2017) J. Sander et al. SCRIPTA MATERIALIA
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties
- (2017) Abdollah Saboori et al. Applied Sciences-Basel
- Microstructural characterisation of a nickel alloy processed via blown powder direct laser deposition (DLD)
- (2017) Jonathan Jones et al. MATERIALS & DESIGN
- Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating
- (2017) Holger Schwab et al. MATERIALS & DESIGN
- Variation of hardness, microstructure, and Laves phase distribution in direct laser deposited alloy 718 cuboids
- (2017) Erica L. Stevens et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Selective laser melting of Invar 36: Microstructure and properties
- (2016) Chunlei Qiu et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Recent advances in grain refinement of light metals and alloys
- (2016) M.A. Easton et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
- (2016) Eric A. Jägle et al. JOM
- Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing
- (2016) Mohammad H. Farshidianfar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
- (2016) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- Additive Manufacturing of AlSi10Mg Alloy Using Direct Energy Deposition: Microstructure and Hardness Characterization
- (2016) M. Javidani et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
- (2016) V.D. Divya et al. MATERIALS CHARACTERIZATION
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
- (2016) Pia Åkerfeldt et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
- (2016) Wei Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
- (2016) J.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping
- (2016) Michał Ziętala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component
- (2016) S. Palanivel et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing
- (2016) J. Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- Review on powder-bed laser additive manufacturing of Inconel 718 parts
- (2016) Xiaoqing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Transmission Electron Microscopy of a CMSX-4 Ni-Base Superalloy Produced by Selective Electron Beam Melting
- (2016) Alireza Parsa et al. Metals
- Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component
- (2016) Pan Wang et al. MATERIALS & DESIGN
- Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting
- (2016) J. Sander et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
- (2016) U. Tradowsky et al. MATERIALS & DESIGN
- Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
- (2016) Jayme S. Keist et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel 316L with low porosity and high build rates
- (2016) Zhongji Sun et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting
- (2015) Xipeng Tan et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- Additive Manufacturing and Characterization of René 80 Superalloy Processed Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair
- (2015) Ranadip Acharya et al. ADVANCED ENGINEERING MATERIALS
- Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
- (2015) Allison M. Beese et al. JOM
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting
- (2015) R. Chou et al. JOM
- Effect of microstructural evolution and elevated temperature on the mechanical properties of Ni–Cr–Mo alloys
- (2015) Ercan Karaköse et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing
- (2015) Amberlee S. Haselhuhn et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural modification of Ti–6Al–4V by using an in-situ printed heat sink in Electron Beam Melting ® (EBM)
- (2015) M. Jamshidinia et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering
- (2015) Chunze Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys
- (2015) Crystopher Brito et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel
- (2015) G. Casalino et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser micro cladding deposition
- (2015) Bo Yao et al. RARE METALS
- Evolution of solidification texture during additive manufacturing
- (2015) H. L. Wei et al. Scientific Reports
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Selective Laser Melting of Ti-45Nb Alloy
- (2015) Holger Schwab et al. Metals
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Investigation of effect of process parameters on multilayer builds by direct metal deposition
- (2014) Tarak Amine et al. APPLIED THERMAL ENGINEERING
- Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
- (2014) J. A. Cherry et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- Heat transfer and fluid flow in additive manufacturing
- (2014) A. Raghavan et al. JOURNAL OF LASER APPLICATIONS
- Optimization of Scan Strategies in Selective Laser Melting of Aluminum Parts With Downfacing Areas
- (2014) Raya Mertens et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
- (2014) H. Khalid Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing
- (2014) Ryan Cottam et al. JOURNAL OF MATERIALS RESEARCH
- The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
- (2014) X.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
- (2014) M. Simonelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of hybrid fabricated Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy by laser additive manufacturing
- (2014) Yanyan Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
- (2014) K. Kempen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
- (2014) V. Manvatkar et al. MATERIALS SCIENCE AND TECHNOLOGY
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
- (2014) M. Yan et al. POWDER METALLURGY
- Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
- (2013) L.E. Murr et al. ACTA MATERIALIA
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
- (2013) Damien Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
- (2013) P. Edwards et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
- (2013) Kamran Shah et al. MATERIALS & DESIGN
- Characterization of stainless steel parts by Laser Metal Deposition Shaping
- (2013) Kai Zhang et al. MATERIALS & DESIGN
- Optimization of homogenization for a low alloyed AlMgSi alloy
- (2013) Yucel Birol MATERIALS CHARACTERIZATION
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part size
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V
- (2013) Chunlei Qiu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading
- (2013) P. Kanagarajah et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of solidification parameters on mechanical properties of directionally solidified Al-Rich Al-Cu alloys
- (2013) Emin Çadırlı METALS AND MATERIALS INTERNATIONAL
- From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
- (2013) Diego Manfredi et al. Materials
- Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
- (2012) K.N. Amato et al. ACTA MATERIALIA
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment
- (2012) Mehdi Rahimian et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of quenching rate on hardness and microstructure of hot-stamped steel
- (2012) Toshinobu Nishibata et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition
- (2012) J. Yu et al. MATERIALS & DESIGN
- Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy
- (2012) Srdjan Milenkovic et al. MATERIALS LETTERS
- Effect of heat treatment on microstructure and mechanical properties of laser melting deposited Ni-base superalloy Rene′41
- (2012) J. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Characterization of Laser-Deposited Al 4047 Alloy
- (2012) G. P. Dinda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
- (2012) Mingming Ma et al. OPTICS AND LASER TECHNOLOGY
- Property evaluation of 304L stainless steel fabricated by selective laser melting
- (2012) K. Abd‐Elghany et al. RAPID PROTOTYPING JOURNAL
- Texture control during laser deposition of nickel-based superalloy
- (2012) G.P. Dinda et al. SCRIPTA MATERIALIA
- Evaluation of the mechanical properties of Inconel 718 components built by laser cladding
- (2011) I. Tabernero et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)
- (2011) Bernd Baufeld JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
- (2011) T. Vilaro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
- (2011) Erhard Brandl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of deposition parameters on mechanical properties of shaped metal deposition parts
- (2011) B Baufeld PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Back-of-the-envelope calculations in friction stir welding – Velocities, peak temperature, torque, and hardness
- (2010) A. Arora et al. ACTA MATERIALIA
- Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies
- (2010) Itziar Tolosa et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
- (2010) J. Alcisto et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders
- (2010) E.O. Olakanmi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process
- (2010) S. Bhattacharya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel
- (2010) M. Olasolo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
- (2009) L.E. Murr et al. ACTA MATERIALIA
- Effect of cooling rate on microstructural formation and hardness of 30CrNi3Mo steel
- (2009) Z. X. Qiao et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Effect of cooling rate on the high strain rate properties of boron steel
- (2009) Alexander Bardelcik et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition
- (2009) Bernd Baufeld et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Effect of nickel equivalent on hydrogen gas embrittlement of austenitic stainless steels based on type 316 at low temperatures
- (2008) Lin Zhang et al. ACTA MATERIALIA
- Variation of microindentation hardness with solidification and microstructure parameters in the Al based alloys
- (2008) H. Kaya et al. APPLIED SURFACE SCIENCE
- Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy
- (2008) L.Y. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire
- (2008) N.I.S. Hussein et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming
- (2008) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
- (2008) G.P. Dinda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations
- (2008) B. Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Recent advances in friction-stir welding – Process, weldment structure and properties
- (2008) R NANDAN et al. PROGRESS IN MATERIALS SCIENCE
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of cooling rate from temperatures above the γ′ solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys
- (2007) R.J. Mitchell et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started