Fundamentals of Superior Properties in Bulk NanoSPD Materials

Properties of Biodegradable Alloys Usable for Medical Purposes

(2016) J. Kubásek et al.   ACTA PHYSICA POLONICA A

New bulk p-type skutterudites DD 0.7 Fe 2.7 Co 1.3 Sb 12− x X x (X = Ge, Sn) reaching ZT > 1.3

(2015) G. Rogl et al.   ACTA MATERIALIA

Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivo

(2015) Joëlle Hofstetter et al.   CORROSION SCIENCE

Phase transformations and mechanical properties of biocompatible Ti–16.1Nb processed by severe plastic deformation

(2015) Ajit Panigrahi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility

(2015) Tarang Mungole et al.   JOURNAL OF MATERIALS SCIENCE

Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature

(2015) Byungmin Ahn et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Changes in microstructure and physical properties of skutterudites after severe plastic deformation

(2015) Gerda Rogl et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary?

(2015) O. Renk et al.   SCRIPTA MATERIALIA

Cell Response to Nanocrystallized Metallic Substrates Obtained through Severe Plastic Deformation

(2014) Sara Bagherifard et al.   ACS Applied Materials & Interfaces

High strength and superconductivity in nanostructured niobium–titanium alloy by high-pressure torsion and annealing: Significance of elemental decomposition and supersaturation

(2014) Kaveh Edalati et al.   ACTA MATERIALIA

Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: Similarities and differences

(2014) Kaveh Edalati et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

A critical examination of the paradox of strength and ductility in ultrafine-grained metals

(2014) Tarang Mungole et al.   JOURNAL OF MATERIALS RESEARCH

High-pressure torsion for fabrication of high-strength and high-electrical conductivity Al micro-wires

(2014) Jorge M. Cubero-Sesin et al.   JOURNAL OF MATERIALS SCIENCE

Fabrication of nanograined silicon by high-pressure torsion

(2014) Yoshifumi Ikoma et al.   JOURNAL OF MATERIALS SCIENCE

Improvement of strength and conductivity in Cu-alloys with the application of high pressure torsion and subsequent heat-treatments

(2014) D. V. Shangina et al.   JOURNAL OF MATERIALS SCIENCE

Evolution of strength and structure during SPD processing of Ti–45Nb alloys: experiments and simulations

(2014) B. Sulkowski et al.   JOURNAL OF MATERIALS SCIENCE

Strengthening of Cu–Ni–Si alloy using high-pressure torsion and aging

(2014) Seungwon Lee et al.   MATERIALS CHARACTERIZATION

Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel

(2014) M.M. Abramova et al.   MATERIALS LETTERS

Nanostructured titanium-based materials for medical implants: Modeling and development

(2014) Leon Mishnaevsky et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing

(2014) Roberto B. Figueiredo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Extraordinary strain hardening by gradient structure

(2014) X. Wu et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Making strong nanomaterials ductile with gradients

(2014) K. Lu   SCIENCE

Synergetic Strengthening by Gradient Structure

(2014) X. L. Wu et al.   Materials Research Letters

Dependence of thermoelectric behaviour on severe plastic deformation parameters: A case study on p-type skutterudite DD0.60Fe3CoSb12

(2013) Gerda Rogl et al.   ACTA MATERIALIA

Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement

(2013) Terence G. Langdon   ACTA MATERIALIA

Extreme grain refinement by severe plastic deformation: A wealth of challenging science

(2013) Y. Estrin et al.   ACTA MATERIALIA

n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R=Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈2.0

(2013) G. Rogl et al.   ACTA MATERIALIA

Elemental separation in nanocrystalline Cu-Al alloys

(2013) Y. B. Wang et al.   APPLIED PHYSICS LETTERS

Mechanism of activation of TiFe intermetallics for hydrogen storage by severe plastic deformation using high-pressure torsion

(2013) Kaveh Edalati et al.   APPLIED PHYSICS LETTERS

An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing

(2013) Alberto Moreira Jorge et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

High-pressure torsion of TiFe intermetallics for activation of hydrogen storage at room temperature with heterogeneous nanostructure

(2013) Kaveh Edalati et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Microstructure and mechanical properties of AZ31 magnesium alloy processed by cyclic closed-die forging

(2013) Wei Guo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Grain size effect on deformation twinning and detwinning

(2013) Y. T. Zhu et al.   JOURNAL OF MATERIALS SCIENCE

Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC

(2013) M. Yu. Murashkin et al.   JOURNAL OF MATERIALS SCIENCE

Mechanical properties of a medical β-type titanium alloy with specific microstructural evolution through high-pressure torsion

(2013) H. Yilmazer et al.   Materials Science & Engineering C-Materials for Biological Applications

Nanograin formation of GaAs by high-pressure torsion

(2013) Yoshifumi Ikoma et al.   PHILOSOPHICAL MAGAZINE LETTERS

Superconducting properties in bulk nanostructured niobium prepared by high-pressure torsion

(2013) Terukazu Nishizaki et al.   PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS

A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity

(2013) R.Z. Valiev et al.   SCRIPTA MATERIALIA

Mechanical Strength and Biocompatibility of Ultrafine-Grained Commercial Purity Titanium

(2013) Yuri Estrin et al.   Biomed Research International

Low Temperature Plasticity of Ultrafine-Grained AE42 and AZ31 Magnesium Alloys

(2012) Sergii Eduardovich Shumilin et al.   ADVANCED ENGINEERING MATERIALS

Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion

(2012) Yoshifumi Ikoma et al.   APPLIED PHYSICS LETTERS

Effect of ECAP processing on corrosion resistance of AE21 and AE42 magnesium alloys

(2012) P. Minárik et al.   APPLIED SURFACE SCIENCE

Biodegradable magnesium implants for orthopedic applications

(2012) Hazibullah Waizy et al.   JOURNAL OF MATERIALS SCIENCE

Phase transformations in the severely plastically deformed Zr–Nb alloys

(2012) B.B. Straumal et al.   MATERIALS LETTERS

Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy

(2012) E. Avtokratova et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena

(2012) X. Sauvage et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development

(2012) I. Sabirov et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improvement of fatigue strength of a Mg–Zn–Zr alloy by integrated extrusion and equal-channel angular pressing

(2012) Alexei Vinogradov et al.   SCRIPTA MATERIALIA

Application of Severe Plastic Deformation Techniques to Magnesium for Enhanced Hydrogen Sorption Properties

(2012) Jacques Huot et al.   Metals

Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel

(2011) H. Ueno et al.   ACTA MATERIALIA

Nanostructured MgH2 prepared by cold rolling and cold forging

(2011) D.R. Leiva et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Hydrogen storage properties of bulk nanostructured ZK60 Mg alloy processed by Equal Channel Angular Pressing

(2011) M. Krystian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Nano-grained pure copper with high-strength and high-conductivity produced by equal channel angular rolling process

(2011) Asiyeh Habibi et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Developing superplasticity and a deformation mechanism map for the Zn–Al eutectoid alloy processed by high-pressure torsion

(2011) Megumi Kawasaki et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-Pressure Torsion for Pure Chromium and Niobium

(2011) Seungwon Lee et al.   MATERIALS TRANSACTIONS

Equal-Channel Angular Pressing and High-Pressure Torsion of Pure Copper: Evolution of Electrical Conductivity and Hardness with Strain

(2011) Kaveh Edalati et al.   MATERIALS TRANSACTIONS

Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals

(2011) S. Ni et al.   PHYSICAL REVIEW B

Deformation twinning in nanocrystalline materials

(2011) Y.T. Zhu et al.   PROGRESS IN MATERIALS SCIENCE

Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper

(2011) T. H. Fang et al.   SCIENCE

Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing

(2010) Dmitry Orlov et al.   ACTA MATERIALIA

High-Pressure Torsion for Giant Magnetoresistance and Better Magnetic Properties

(2010) Shingo Nishihata et al.   ADVANCED ENGINEERING MATERIALS

Bulk Nanostructured Materials: Non-Mechanical Synthesis

(2010) Yulia Ivanisenko et al.   ADVANCED ENGINEERING MATERIALS

The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques

(2010) Ruslan Z. Valiev et al.   ADVANCED ENGINEERING MATERIALS

Strategies for Improving Tensile Ductility of Bulk Nanostructured Materials

(2010) Yonghao Zhao et al.   ADVANCED ENGINEERING MATERIALS

Impact of high pressure torsion on the microstructure and physical properties of Pr0.67Fe3CoSb12, Pr0.71Fe3.5Ni0.5Sb12, and Ba0.06Co4Sb12

(2010) L. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy

(2010) Ruslan Z. Valiev et al.   JOURNAL OF MATERIALS SCIENCE

Equal Channel Angular Extrusion Technique for Controlling the Texture of n-Type Bi2Te3 Based Thermoelectric Materials

(2010) Takahiro Hayashi et al.   MATERIALS TRANSACTIONS

On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation

(2010) R.Z. Valiev et al.   SCRIPTA MATERIALIA

Nanostructural hierarchy increases the strength of aluminium alloys

(2010) Peter V. Liddicoat et al.   Nature Communications

Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography

(2009) Jin-Woo Park et al.   Acta Biomaterialia

Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy

(2009) G. Sha et al.   ACTA MATERIALIA

Cyclic deformation and fatigue properties of very fine-grained metals and alloys

(2009) Hael Mughrabi et al.   INTERNATIONAL JOURNAL OF FATIGUE

Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation: An overview

(2009) Yuri Estrin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Severe plastic deformation in Gum Metal with composition at the structural stability limit

(2009) Tadahiko Furuta et al.   International Journal of Materials Research

Seventy-five years of superplasticity: historic developments and new opportunities

(2009) Terence G. Langdon   JOURNAL OF MATERIALS SCIENCE

Texture of bismuth telluride-based thermoelectric semiconductors processed by high-pressure torsion

(2009) Maki Ashida et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

High-strength, high-conductivity ultra-fine grains commercial pure copper produced by ARB process

(2009) Sayed Abdollah Hosseini et al.   MATERIALS & DESIGN

Ultrafine grained copper alloy sheets having both high strength and high electric conductivity

(2009) Naoki Takata et al.   MATERIALS LETTERS

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

(2009) K. Lu et al.   SCIENCE

Record Superplastic Ductility in a Magnesium Alloy Processed by Equal-Channel Angular Pressing

(2008) R. B. Figueiredo et al.   ADVANCED ENGINEERING MATERIALS

Nanostructured Titanium for Biomedical Applications

(2008) R. Z. Valiev et al.   ADVANCED ENGINEERING MATERIALS

Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density

(2008) Y. H. Zhao et al.   APPLIED PHYSICS LETTERS

Accelerated growth of preosteoblastic cells on ultrafine grained titanium

(2008) Y. Estrin et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

High-pressure torsion for production of magnetoresistance in Cu–Co alloy

(2008) Kenichiro Suehiro et al.   JOURNAL OF MATERIALS SCIENCE

Microstructural evolution in pure aluminum processed by high-pressure torsion

(2008) Yuki Ito et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain Refinement and Mechanical Behavior of the Al Alloy, Subjected to the New SPD Technique

(2008) Ruslan Z. Valiev et al.   MATERIALS TRANSACTIONS

Nanostructure and related mechanical properties of an Al–Mg–Si alloy processed by severe plastic deformation

(2008) Gulnaz Nurislamova et al.   PHILOSOPHICAL MAGAZINE LETTERS

Inverse Grain-Size Effect on Twinning in Nanocrystalline Ni

(2008) X. L. Wu et al.   PHYSICAL REVIEW LETTERS

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Mechanical biocompatibilities of titanium alloys for biomedical applications

(2007) Mitsuo Niinomi   Journal of the Mechanical Behavior of Biomedical Materials

Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu–Zn alloys

(2007) Y.H. Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING