Solvent inkjet printing process for the fabrication of polymer solar cells

Thermal Annealing Effect on the Morphology of Inkjet Printed Polymer:Fullerene Composites Solar Cells

(2016) V. Fauzia et al.   ACTA PHYSICA POLONICA A

Aesthetically Pleasing Conjugated Polymer:Fullerene Blends for Blue-Green Solar Cells Via Roll-to-Roll Processing

(2012) Chad M. Amb et al.   ACS Applied Materials & Interfaces

Solution processed LiF anode modification for polymer solar cells

(2012) Ayse Turak et al.   APPLIED PHYSICS LETTERS

Highly efficient indium tin oxide-free organic photovoltaics using inkjet-printed silver nanoparticle current collecting grids

(2012) M. Neophytou et al.   APPLIED PHYSICS LETTERS

Small Molecules Based on Benzo[1,2-b:4,5-b′]dithiophene Unit for High-Performance Solution-Processed Organic Solar Cells

(2012) Jiaoyan Zhou et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Inkjet-printed polymer–fullerene blends for organic electronic applications

(2012) M. Neophytou et al.   MICROELECTRONIC ENGINEERING

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes

(2012) Jong-Su Yu et al.   Nanoscale

Photonic sintering of inkjet printed current collecting grids for organic solar cell applications

(2012) Yulia Galagan et al.   ORGANIC ELECTRONICS

Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells

(2012) Yulia Galagan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fully spray-coated inverted organic solar cells

(2012) Jae-Wook Kang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance

(2012) Monika M. Voigt et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Preparation of Active Layers in Polymer Solar Cells by Aerosol Jet Printing

(2011) Chunhe Yang et al.   ACS Applied Materials & Interfaces

Stability of Polymer Solar Cells

(2011) Mikkel Jørgensen et al.   ADVANCED MATERIALS

Influence of the processing solvent on the photoactive layer nanomorphology of P3HT/PC60BM solar cells

(2011) Raoul Mens et al.   JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY

Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes

(2011) Myun-sung Hwang et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

A comparative assessment of surface microstructure and electrical conductivity dependence on co-solvent addition in spin coated and inkjet printed poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS)

(2011) Peter Wilson et al.   ORGANIC ELECTRONICS

Ag grid/ITO hybrid transparent electrodes prepared by inkjet printing

(2011) Jin-A. Jeong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Inkjet printing of transparent InZnSnO conducting electrodes from nano-particle ink for printable organic photovoltaics

(2011) Jihoon Kim et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water

(2011) Thue T. Larsen-Olsen et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Organic solar cells fabricated on inkjet-printed indium tin oxide electrodes

(2011) Han-Ki Kim et al.   SURFACE & COATINGS TECHNOLOGY

Direct writing of semiconducting polythiophene and fullerene derivatives composite from bulk heterojunction solar cell by inkjet printing

(2011) Jae Kwan Lee et al.   THIN SOLID FILMS

Characteristics of inkjet-printed nano indium tin oxide particles for transparent conducting electrodes

(2010) Jin-A. Jeong et al.   CURRENT APPLIED PHYSICS

Highly Efficient Inkjet-Printed Organic Photovoltaic Cells

(2010) Jaewook Jung et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives

(2010) Seung Hun Eom et al.   ORGANIC ELECTRONICS

A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers

(2010) Alexander Lange et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Ink-jet printed transparent electrode using nano-size indium tin oxide particles for organic photovoltaics

(2010) Jin-A. Jeong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing

(2010) Anke Teichler et al.   Advanced Energy Materials

Inkjet Printing-Process and Its Applications

(2009) Madhusudan Singh et al.   ADVANCED MATERIALS

On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells

(2009) Claudia N. Hoth et al.   JOURNAL OF MATERIALS CHEMISTRY

Polymer solar cells based on inkjet-printed PEDOT:PSS layer

(2009) Seung Hun Eom et al.   ORGANIC ELECTRONICS

Nano-Scale ZnO Buffer Layer for Inkjet-Printed Polymer Solar Cells

(2008) Seung Hun Eom et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Printing Highly Efficient Organic Solar Cells

(2008) Claudia N. Hoth et al.   NANO LETTERS

Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells

(2008) Seung Hun Eom et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells

(2008) K. Xerxes Steirer et al.   THIN SOLID FILMS