Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes

Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes

(2012) Markus Hösel et al.   JOURNAL OF MATERIALS CHEMISTRY

Roll-to-roll fabrication of polymer solar cells

(2012) Roar Søndergaard et al.   Materials Today

Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells

(2012) Yulia Galagan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area

(2012) Riccardo Po et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

The use of polyurethane as encapsulating method for polymer solar cells—An inter laboratory study on outdoor stability in 8 countries

(2012) Roar R. Søndergaard et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Round-Robin Studies as a Method for Testing and Validating High-Efficiency ITO-Free Polymer Solar Cells Based on Roll-to-Roll-Coated Highly Conductive and Transparent Flexible Substrates

(2012) Thue T. Larsen-Olsen et al.   Advanced Energy Materials

Aqueous Processing of Low-Band-Gap Polymer Solar Cells Using Roll-to-Roll Methods

(2011) Thomas R. Andersen et al.   ACS Nano

The OE-A OPV demonstrator anno domini 2011

(2011) Frederik C. Krebs et al.   Energy & Environmental Science

Life-cycle analysis of product integrated polymer solar cells

(2011) Nieves Espinosa et al.   Energy & Environmental Science

Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment

(2011) Brian Azzopardi et al.   Energy & Environmental Science

Solar cells with one-day energy payback for the factories of the future

(2011) Nieves Espinosa et al.   Energy & Environmental Science

ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules

(2011) Matthieu Manceau et al.   ORGANIC ELECTRONICS

ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating

(2011) B. Zimmermann et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Over 30% transparency large area inverted organic solar array by spray

(2011) Jason E. Lewis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Airbrush spray-coating of polymer bulk-heterojunction solar cells

(2011) Gianpaolo Susanna et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

(2011) Suren A. Gevorgyan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing

(2011) Nieves Espinosa et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

All-solution-processed ITO-free polymer solar cells fabricated on copper sheets

(2011) Tae-Soo Kim et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

(2011) David M. Tanenbaum et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Environmental and economic assessment of ITO-free electrodes for organic solar cells

(2011) Christopher J.M. Emmott et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Current Collecting Grids for ITO-Free Solar Cells

(2011) Yulia Galagan et al.   Advanced Energy Materials

Printed Paper Photovoltaic Cells

(2011) Arved Hübler et al.   Advanced Energy Materials

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

(2011) David M. Tanenbaum et al.   RSC Advances

Ultra Fast and Parsimonious Materials Screening for Polymer Solar Cells Using Differentially Pumped Slot-Die Coating

(2010) Jan Alstrup et al.   ACS Applied Materials & Interfaces

Multi-Source/Component Spray Coating for Polymer Solar Cells

(2010) Li-Min Chen et al.   ACS Nano

High-Performance Organic Solar Cells with Spray-Coated Hole-Transport and Active Layers

(2010) Claudio Girotto et al.   ADVANCED FUNCTIONAL MATERIALS

Effects of concentrated sunlight on organic photovoltaics

(2010) Thomas Tromholt et al.   APPLIED PHYSICS LETTERS

Technology development for roll-to-roll production of organic photovoltaics

(2010) Yulia Galagan et al.   CHEMICAL ENGINEERING AND PROCESSING

A new approach to the solvent system for inkjet-printed P3HT:PCBM solar cells and its use in devices with printed passive and active layers

(2010) Alexander Lange et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fully spray-coated ITO-free organic solar cells for low-cost power generation

(2010) Seok-In Na et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions

(2010) Nieves Espinosa et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Unknown

(2010) Kwanghee Lee   SOLAR ENERGY MATERIALS AND SOLAR CELLS

ITO-free flexible organic solar cells with printed current collecting grids

(2010) Yulia Galagan et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Spray-coated organic solar cells with large-area of 12.25cm2

(2010) Sun-Young Park et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode

(2010) Roar Søndergaard et al.   Advanced Energy Materials

A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies

(2009) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

A high-mobility electron-transporting polymer for printed transistors

(2009) He Yan et al.   NATURE

All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps

(2009) Frederik C. Krebs   ORGANIC ELECTRONICS

A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

(2009) Frederik C. Krebs et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes

(2008) Myung-Gyu Kang et al.   ADVANCED MATERIALS

Polymer based organic solar cells using ink-jet printed active layers

(2008) T. Aernouts et al.   APPLIED PHYSICS LETTERS

Printing Highly Efficient Organic Solar Cells

(2008) Claudia N. Hoth et al.   NANO LETTERS