3D printing of limestone-calcined clay cement: A review of its potential implementation in the construction industry
出版年份 2023 全文链接
标题
3D printing of limestone-calcined clay cement: A review of its potential implementation in the construction industry
作者
关键词
-
出版物
Results in Engineering
Volume 18, Issue -, Pages 101115
出版商
Elsevier BV
发表日期
2023-04-19
DOI
10.1016/j.rineng.2023.101115
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Use of industrial waste materials for 3D printing of sustainable concrete: A review
- (2022) Dhrutiman Dey et al. Journal of Cleaner Production
- Sustainable lightweight engineered cementitious composites using limestone calcined clay cement (LC3)
- (2022) Yingwu Zhou et al. COMPOSITES PART B-ENGINEERING
- Criticality of binder-aggregate interaction for buildability of 3D printed concrete containing limestone calcined clay
- (2022) Bhattacherjee Shantanu et al. CEMENT & CONCRETE COMPOSITES
- Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
- (2021) Manu K. Mohan et al. CONSTRUCTION AND BUILDING MATERIALS
- Discussion: Commentary: 3D printing set to transform the construction industry
- (2021) Paul Mullett et al. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS
- A systematic review and analysis of the viability of 3D-printed construction in remote environments
- (2021) Steven J. Schuldt et al. AUTOMATION IN CONSTRUCTION
- Printability and particle packing of 3D-printable limestone calcined clay cement composites
- (2021) Wu-Jian Long et al. CONSTRUCTION AND BUILDING MATERIALS
- Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages
- (2021) Yosra Briki et al. CEMENT AND CONCRETE RESEARCH
- Impact of Alkali Salts on the Hydration of Ordinary Portland Cement and Limestone–Calcined Clay Cement
- (2021) Sreejith Krishnan et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- 3D concrete printing for sustainable and economical construction: A comparative study
- (2021) Mustafa Batikha et al. AUTOMATION IN CONSTRUCTION
- 3D printing of calcined clay-limestone-based cementitious materials
- (2021) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- The role of limestone and calcined clay on the rheological properties of LC3
- (2020) Tafadzwa Ronald Muzenda et al. CEMENT & CONCRETE COMPOSITES
- Microstructure and strength development of quaternary blend high-volume fly ash concrete
- (2020) Chamila Gunasekara et al. JOURNAL OF MATERIALS SCIENCE
- Effects and threshold of water film thickness on multi-mineral cement paste
- (2020) Hengrui Liu et al. CEMENT & CONCRETE COMPOSITES
- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
- (2020) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- Calcined Clay as Supplementary Cementitious Material
- (2020) Roman Jaskulski et al. Materials
- Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
- (2020) Manu K. Mohan et al. CEMENT AND CONCRETE RESEARCH
- High-performance concrete incorporating calcined kaolin clay and limestone as cement substitute
- (2020) Hongjian Du et al. CONSTRUCTION AND BUILDING MATERIALS
- Environmental and economic assessment on 3D printed buildings with recycled concrete
- (2020) Yilong Han et al. JOURNAL OF CLEANER PRODUCTION
- Mechanisms dominating thixotropy in limestone calcined clay cement (LC3)
- (2020) Pengkun Hou et al. CEMENT AND CONCRETE RESEARCH
- Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context
- (2019) R. Gettu et al. MATERIALS AND STRUCTURES
- A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
- (2019) Ehsan Hosseini et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
- (2019) Chen et al. Applied Sciences-Basel
- An approach to develop printable strain hardening cementitious composites
- (2019) Stefan Chaves Figueiredo et al. MATERIALS & DESIGN
- Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure
- (2019) Stefan Chaves Figueiredo et al. CONSTRUCTION AND BUILDING MATERIALS
- Green concrete containing diatomaceous earth and limestone: Workability, mechanical properties, and life-cycle assessment
- (2019) Jiaqi Li et al. JOURNAL OF CLEANER PRODUCTION
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- Influence of temperature on hydration and microstructure properties of limestone-calcined clay blended cement
- (2019) Geetika Mishra et al. MATERIALS AND STRUCTURES
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Reactivity of supplementary cementitious materials (SCMs) in cement blends
- (2019) Jørgen Skibsted et al. CEMENT AND CONCRETE RESEARCH
- Mechanical characterization of 3D printable concrete
- (2019) A.V. Rahul et al. CONSTRUCTION AND BUILDING MATERIALS
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- Additive manufacturing technology and its implementation in construction as an eco-innovative solution
- (2018) Seyed Hamidreza Ghaffar et al. AUTOMATION IN CONSTRUCTION
- Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC 3 )
- (2018) Yuvaraj Dhandapani et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Determination of the amount of reacted metakaolin in calcined clay blends
- (2018) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Eco-efficient cements: Potential economically viable solutions for a low-CO 2 cement-based materials industry
- (2018) Karen L. Scrivener et al. CEMENT AND CONCRETE RESEARCH
- Investigation of the calcined kaolinite content on the hydration of Limestone Calcined Clay Cement (LC 3 )
- (2018) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion
- (2018) Dale P. Bentz et al. CONSTRUCTION AND BUILDING MATERIALS
- A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures
- (2018) Dehui Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of cement replacement by limestone calcined clay pozzolan on the engineering properties of mortar and concrete
- (2018) Vineet Shah et al. ADVANCES IN CEMENT RESEARCH
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Investigation of C-A-S-H composition, morphology and density in Limestone Calcined Clay Cement (LC3)
- (2018) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3)
- (2018) Radhakrishna G. Pillai et al. CEMENT AND CONCRETE RESEARCH
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- Calcined clays for low carbon cement: Rheological behaviour in fresh Portland cement pastes
- (2018) C. Aramburo et al. MATERIALS LETTERS
- Influence of fineness of raw clay and calcination temperature on the performance of calcined clay-limestone blended cements
- (2018) S. Ferreiro et al. APPLIED CLAY SCIENCE
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Natural zeolite and its application in concrete composite production
- (2018) Yen Thi Tran et al. COMPOSITES PART B-ENGINEERING
- A review on fly ash characteristics – Towards promoting high volume utilization in developing sustainable concrete
- (2017) T. Hemalatha et al. JOURNAL OF CLEANER PRODUCTION
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC
- (2017) Wei Huang et al. MATERIALS & DESIGN
- A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
- (2017) Guowei Ma et al. Frontiers of Structural and Civil Engineering
- Calcined clay limestone cements (LC3)
- (2017) Karen Scrivener et al. CEMENT AND CONCRETE RESEARCH
- Limestone addition effects on concrete porosity
- (2016) Abdurrahman A. Elgalhud et al. CEMENT & CONCRETE COMPOSITES
- Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
- (2016) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba
- (2016) S. Sánchez Berriel et al. JOURNAL OF CLEANER PRODUCTION
- Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration
- (2015) Adrian Alujas et al. APPLIED CLAY SCIENCE
- A comprehensive review on the applications of coal fly ash
- (2015) Z.T. Yao et al. EARTH-SCIENCE REVIEWS
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- Potential use of Argentine kaolinitic clays as pozzolanic material
- (2014) Alejandra Tironi et al. APPLIED CLAY SCIENCE
- Concrete mix design based on water film thickness and paste film thickness
- (2013) Leo G. Li et al. CEMENT & CONCRETE COMPOSITES
- The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash
- (2013) Kirk Vance et al. CEMENT AND CONCRETE RESEARCH
- Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays
- (2013) Shiho Kawashima et al. CEMENT AND CONCRETE RESEARCH
- Cement and carbon emissions
- (2013) Laurent Barcelo et al. MATERIALS AND STRUCTURES
- Activation of clay in cement mortar applying mechanical, chemical and thermal techniques
- (2012) Noor-ul- Amin et al. ADVANCES IN CEMENT RESEARCH
- Cement substitution by a combination of metakaolin and limestone
- (2012) M. Antoni et al. CEMENT AND CONCRETE RESEARCH
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Developments in construction-scale additive manufacturing processes
- (2011) S. Lim et al. AUTOMATION IN CONSTRUCTION
- Superfine cement for improving packing density, rheology and strength of cement paste
- (2011) J.J. Chen et al. CEMENT & CONCRETE COMPOSITES
- Supplementary cementitious materials
- (2011) Barbara Lothenbach et al. CEMENT AND CONCRETE RESEARCH
- Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
- (2011) Benjamin C. McLellan et al. JOURNAL OF CLEANER PRODUCTION
- Utilization of silica fume in concrete: Review of hardened properties
- (2011) Rafat Siddique RESOURCES CONSERVATION AND RECYCLING
- Role of water film thickness in rheology of CSF mortar
- (2010) W.W.S. Fung et al. CEMENT & CONCRETE COMPOSITES
- The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite
- (2010) Rodrigo Fernandez et al. CEMENT AND CONCRETE RESEARCH
- Mortar design based on water film thickness
- (2010) L.G. Li et al. CONSTRUCTION AND BUILDING MATERIALS
- Pozzolan obtained by mechanochemical and thermal treatments of kaolin
- (2009) C. Vizcayno et al. APPLIED CLAY SCIENCE
- Influence of clays on the rheology of cement pastes
- (2009) Nathan A. Tregger et al. CEMENT AND CONCRETE RESEARCH
- Distinct-layer casting of SCC: The mechanical consequences of thixotropy
- (2007) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More