3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
出版年份 2021 全文链接
标题
3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
作者
关键词
-
出版物
Materials
Volume 14, Issue 14, Pages 3800
出版商
MDPI AG
发表日期
2021-07-08
DOI
10.3390/ma14143800
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of flow behavior and process-induced variations on shape stability of 3D printed elements – A review
- (2021) Kavya Vallurupalli et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties and durability of large-scale 3D printed cement-based materials
- (2021) Yu Zhang et al. MATERIALS AND STRUCTURES
- Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography
- (2021) Yu Chen et al. MATERIALS CHARACTERIZATION
- Optimum Mix Design for 3D Concrete Printing Using Mining Tailings: A Case Study in Spain
- (2021) Martina-Inmaculada Álvarez-Fernández et al. Sustainability
- The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review
- (2021) Pawel Sikora et al. Applied Nanoscience
- Fiber orientation effects on ultra-high performance concrete formed by 3D printing
- (2021) Arun R. Arunothayan et al. CEMENT AND CONCRETE RESEARCH
- The effects of nanosilica on the fresh and hardened properties of 3D printable mortars
- (2021) Pawel Sikora et al. CONSTRUCTION AND BUILDING MATERIALS
- Fresh and Rheological Performances of Air-Entrained 3D Printable Mortars
- (2021) Yeşim Tarhan et al. Materials
- Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials
- (2021) Mehdi Chougan et al. MATERIALS & DESIGN
- 3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties
- (2021) Karla Cuevas et al. Journal of Building Engineering
- Framework for technical specifications of 3D concrete printers
- (2021) Jihoon Chung et al. AUTOMATION IN CONSTRUCTION
- Reinforcement method for 3D concrete printing using paste-coated bar penetrations
- (2021) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- 3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates
- (2021) Gang Bai et al. CEMENT & CONCRETE COMPOSITES
- Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications
- (2021) Shin Hau Bong et al. CEMENT & CONCRETE COMPOSITES
- Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance
- (2021) Yidong Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical and microstructural evolution of 3D printed concrete with polyethylene fiber and recycled sand at elevated temperatures
- (2021) Jianzhuang Xiao et al. CONSTRUCTION AND BUILDING MATERIALS
- Flexural properties of 3D printed fibre-reinforced concrete with recycled sand
- (2021) Tao Ding et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing
- (2021) Guan Heng Andrew Ting et al. Journal of Cleaner Production
- An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites
- (2021) Hongwei Song et al. Materials
- Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies
- (2020) Li Wang et al. CEMENT & CONCRETE COMPOSITES
- Evaluating the printability of concretes containing lightweight coarse aggregates
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- 3D printing of a post-tensioned concrete girder designed by topology optimization
- (2020) Gieljan Vantyghem et al. AUTOMATION IN CONSTRUCTION
- Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
- (2020) Mingxu Chen et al. COMPOSITES PART B-ENGINEERING
- Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions
- (2020) Zhijian Li et al. COMPOSITES PART B-ENGINEERING
- A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Yield stress criteria to assess the buildability of 3D concrete printing
- (2020) R. Jayathilakage et al. CONSTRUCTION AND BUILDING MATERIALS
- An experimental study of the behavior of 3D printed concrete at elevated temperatures
- (2020) Antonio Cicione et al. FIRE SAFETY JOURNAL
- Nailing of Layers: A Promising Way to Reinforce Concrete 3D Printing Structures
- (2020) A. Perrot et al. Materials
- An automated system for 3D printing functionally graded concrete-based materials
- (2020) Flávio Craveiro et al. Additive Manufacturing
- 3D printable magnesium oxide concrete: towards sustainable modern architecture
- (2020) Abdullah Khalil et al. Additive Manufacturing
- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)
- (2020) Harald Kloft et al. CEMENT AND CONCRETE RESEARCH
- From Smart Dynamic Casting to a growing family of Digital Casting Systems
- (2020) Ena Lloret-Fritschi et al. CEMENT AND CONCRETE RESEARCH
- Opportunities and challenges for structural engineering of digitally fabricated concrete
- (2020) Costantino Menna et al. CEMENT AND CONCRETE RESEARCH
- Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
- (2020) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- Setting on demand for digital concrete – Principles, measurements, chemistry, validation
- (2020) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
- (2020) Tao Ding et al. COMPOSITE STRUCTURES
- Mechanical behavior of 3D printed mortar with recycled sand at early ages
- (2020) Tao Ding et al. CONSTRUCTION AND BUILDING MATERIALS
- The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites
- (2020) Mehdi Chougan et al. CONSTRUCTION AND BUILDING MATERIALS
- Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
- (2020) Luong Pham et al. CONSTRUCTION AND BUILDING MATERIALS
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
- (2020) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Study of MgO-activated slag as a cementless material for sustainable spray-based 3D printing
- (2020) Bing Lu et al. JOURNAL OF CLEANER PRODUCTION
- 3D extrusion free forming of geopolymer composites: Materials modification and processing optimization
- (2020) Chenchen Sun et al. JOURNAL OF CLEANER PRODUCTION
- Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing
- (2020) Shravan Muthukrishnan et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
- (2020) Karol Federowicz et al. Materials
- Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete: Concept and Feasibility Study
- (2020) Viktor Mechtcherine et al. Materials
- Rotation nozzle and numerical simulation of mass distribution at corners in 3D cementitious material printing
- (2020) Zhixin Liu et al. Additive Manufacturing
- Additive manufacturing: Technology, applications, markets, and opportunities for the built environment
- (2020) Ans Al Rashid et al. AUTOMATION IN CONSTRUCTION
- A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
- (2020) Sooraj A.O. Nair et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties of layered 3D printed concrete with recycled sand
- (2020) Tao Ding et al. CEMENT & CONCRETE COMPOSITES
- CCR Digital Concrete 2020 SI: Editorial
- (2020) Freek Bos et al. CEMENT AND CONCRETE RESEARCH
- Mechanical assessment of concrete – Steel bonding in 3D printed elements
- (2020) Bilal Baz et al. CONSTRUCTION AND BUILDING MATERIALS
- Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
- (2020) Arun R. Arunothayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars used for 3D printing
- (2020) Mohammad Amin Moeini et al. CONSTRUCTION AND BUILDING MATERIALS
- Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering
- (2020) J. Van Der Putten et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D-printable lightweight foamed concrete and comparison with classical foamed concrete in terms of fresh state properties and mechanical strength
- (2020) Devid Falliano et al. CONSTRUCTION AND BUILDING MATERIALS
- Use of municipal solid waste incineration ash in 3D printable concrete
- (2020) Atta Ur Rehman et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Development of extrudable high strength fiber reinforced concrete incorporating nano calcium carbonate
- (2020) S.H. Chu et al. Additive Manufacturing
- Bond properties of reinforcing bar penetrations in 3D concrete printing
- (2020) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
- (2020) Manu K. Mohan et al. CEMENT AND CONCRETE RESEARCH
- Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization
- (2020) Zifan Geng et al. CEMENT AND CONCRETE RESEARCH
- Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing
- (2020) Alexander Lin et al. COMPOSITE STRUCTURES
- Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
- (2020) Shravan Muthukrishnan et al. CONSTRUCTION AND BUILDING MATERIALS
- Environmental and economic assessment on 3D printed buildings with recycled concrete
- (2020) Yilong Han et al. JOURNAL OF CLEANER PRODUCTION
- An investigation into the porosity of extrusion-based 3D printed concrete
- (2020) Jacques Kruger et al. Additive Manufacturing
- Vibration induced active rheology control for 3D concrete printing
- (2020) J.G. Sanjayan et al. CEMENT AND CONCRETE RESEARCH
- Rheological Property Criteria for Buildable 3D Printing Concrete
- (2019) Hoseong Jeong et al. Materials
- Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
- (2019) Guan Heng Andrew Ting et al. Journal of Material Cycles and Waste Management
- Rheological and harden properties of the high-thixotropy 3D printing concrete
- (2019) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
- (2019) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- A systematical review of 3D printable cementitious materials
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
- (2019) Yu Chen et al. Materials
- Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
- (2019) Chen et al. Applied Sciences-Basel
- Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders
- (2019) Hussam Alghamdi et al. MATERIALS & DESIGN
- Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
- (2019) Taylor Marchment et al. MATERIALS & DESIGN
- An approach to develop printable strain hardening cementitious composites
- (2019) Stefan Chaves Figueiredo et al. MATERIALS & DESIGN
- Properties of concrete elements with 3-D printed formworks which substitute steel reinforcement
- (2019) Jacek Katzer et al. CONSTRUCTION AND BUILDING MATERIALS
- Underwater 3D printing of cement-based mortar
- (2019) Brahim Mazhoud et al. CONSTRUCTION AND BUILDING MATERIALS
- Thixotropy and interfacial bond strengths of polymer-modified printed mortars
- (2019) Fatima El Sakka et al. MATERIALS AND STRUCTURES
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- Volume-forming 3D concrete printing using a variable-size square nozzle
- (2019) Jie Xu et al. AUTOMATION IN CONSTRUCTION
- In-situ construction method for lunar habitation: Chinese Super Mason
- (2019) Cheng Zhou et al. AUTOMATION IN CONSTRUCTION
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
- (2019) Oscar A. Mendoza Reales et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of printing parameters in 3D concrete printing: Printing region and support structures
- (2019) Yi Wei Daniel Tay et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
- (2019) Viktor Mechtcherine et al. AUTOMATION IN CONSTRUCTION
- Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
- (2019) R.J.M. Wolfs et al. CEMENT & CONCRETE COMPOSITES
- A review of the current progress and application of 3D printed concrete
- (2019) Jingchuan Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
- (2019) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
- (2019) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography
- (2019) Hojae Lee et al. CONSTRUCTION AND BUILDING MATERIALS
- Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water
- (2019) John Temitope Kolawole et al. CONSTRUCTION AND BUILDING MATERIALS
- Microstructural Characterization of 3D Printed Cementitious Materials
- (2019) Jolien Van Der Putten et al. Materials
- Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
- (2019) Binrong Zhu et al. MATERIALS & DESIGN
- Mesh reinforcing method for 3D Concrete Printing
- (2019) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- Direct printing test for buildability of 3D-printable concrete considering economic viability
- (2019) Venkatesh Naidu Nerella et al. AUTOMATION IN CONSTRUCTION
- 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
- (2019) Jacques Kruger et al. COMPOSITES PART B-ENGINEERING
- Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite
- (2019) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical characterization of 3D printable concrete
- (2019) A.V. Rahul et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of the printing method and mortar’s workability on pull-out strength of 3D printed elements
- (2019) Bilal Baz et al. CONSTRUCTION AND BUILDING MATERIALS
- A feasible method for measuring the buildability of fresh 3D printing mortar
- (2019) Qiang Yuan et al. CONSTRUCTION AND BUILDING MATERIALS
- Evaluation of the Mechanical Properties of a 3D-Printed Mortar
- (2019) Hojae Lee et al. Materials
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- A self-reinforced cementitious composite for building-scale 3D printing
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rethinking reinforcement for digital fabrication with concrete
- (2018) Domenico Asprone et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- The role of early age structural build-up in digital fabrication with concrete
- (2018) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
- (2018) Ye Qian et al. CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- 3D printing of earth-based materials: Processing aspects
- (2018) A. Perrot et al. CONSTRUCTION AND BUILDING MATERIALS
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Concrete pumping prediction considering different measurement of the rheological properties
- (2018) Jeong Su Kim et al. CONSTRUCTION AND BUILDING MATERIALS
- Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
- (2018) Jian Hui Lim et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour
- (2018) Viktor Mechtcherine et al. CONSTRUCTION AND BUILDING MATERIALS
- The rheological properties of self-compacting concrete containing superplasticizer and air-entraining agent
- (2018) Fali Huang et al. CONSTRUCTION AND BUILDING MATERIALS
- Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
- (2018) A.S.J. Suiker INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Measurement of tensile bond strength of 3D printed geopolymer mortar
- (2018) Biranchi Panda et al. MEASUREMENT
- Materials and design concepts for space-resilient structures
- (2018) Mohannad Z. Naser et al. PROGRESS IN AEROSPACE SCIENCES
- Visualization of Concrete Slump Flow Using the Kinect Sensor
- (2018) Jung-Hoon Kim et al. SENSORS
- Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield Stress and Thixotropy of Cement Pastes
- (2018) Ye Qian et al. Materials
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials
- (2018) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement Paste
- (2018) Mingxu Chen et al. Materials
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Space-native construction materials for earth-independent and sustainable infrastructure
- (2018) M.Z. Naser ACTA ASTRONAUTICA
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete
- (2015) Mouhcine Benaicha et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of structures 3D printed with cementitious powders
- (2015) Peng Feng et al. CONSTRUCTION AND BUILDING MATERIALS
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started