标题
3D printing of calcined clay-limestone-based cementitious materials
作者
关键词
3D concrete printing, Calcined clay, Sustainable cementitious material, Early-age hydration, Stiffness evolution
出版物
CEMENT AND CONCRETE RESEARCH
Volume 149, Issue -, Pages 106553
出版商
Elsevier BV
发表日期
2021-08-05
DOI
10.1016/j.cemconres.2021.106553
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
- (2021) Manu K. Mohan et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties
- (2021) Kequan Yu et al. CEMENT AND CONCRETE RESEARCH
- The role of limestone and calcined clay on the rheological properties of LC3
- (2020) Tafadzwa Ronald Muzenda et al. CEMENT & CONCRETE COMPOSITES
- A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Effects and threshold of water film thickness on multi-mineral cement paste
- (2020) Hengrui Liu et al. CEMENT & CONCRETE COMPOSITES
- Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
- (2020) Mingxu Chen et al. COMPOSITES PART B-ENGINEERING
- Characteristics of components in calcined clays and their influence on the efficiency of superplasticizers
- (2020) Ricarda Sposito et al. CEMENT & CONCRETE COMPOSITES
- Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
- (2020) Yu Chen et al. CEMENT & CONCRETE COMPOSITES
- Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
- (2020) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
- (2020) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- A study on fresh properties of limestone calcined clay blended cementitious systems
- (2020) Nithya Nair et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
- (2020) Manu K. Mohan et al. CEMENT AND CONCRETE RESEARCH
- High-performance concrete incorporating calcined kaolin clay and limestone as cement substitute
- (2020) Hongjian Du et al. CONSTRUCTION AND BUILDING MATERIALS
- The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties
- (2020) Franco Zunino et al. CEMENT AND CONCRETE RESEARCH
- Linking Fresh Paste Microstructure, Rheology and Extrusion Characteristics of Cementitious Binders for 3D Printing
- (2019) Sooraj A.O. Nair et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Temperature dependence of structural build-up and its relation with hydration kinetics of cement paste
- (2019) Hai Huang et al. CONSTRUCTION AND BUILDING MATERIALS
- A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
- (2019) Ehsan Hosseini et al. CEMENT & CONCRETE COMPOSITES
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
- (2019) Yu Chen et al. Materials
- Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
- (2019) Chen et al. Applied Sciences-Basel
- An approach to develop printable strain hardening cementitious composites
- (2019) Stefan Chaves Figueiredo et al. MATERIALS & DESIGN
- Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure
- (2019) Stefan Chaves Figueiredo et al. CONSTRUCTION AND BUILDING MATERIALS
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- Effect of printing parameters in 3D concrete printing: Printing region and support structures
- (2019) Yi Wei Daniel Tay et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content
- (2019) Chao Zhang et al. CEMENT & CONCRETE COMPOSITES
- Reactivity of supplementary cementitious materials (SCMs) in cement blends
- (2019) Jørgen Skibsted et al. CEMENT AND CONCRETE RESEARCH
- Recent advances on yield stress and elasticity of fresh cement-based materials
- (2019) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- Direct printing test for buildability of 3D-printable concrete considering economic viability
- (2019) Venkatesh Naidu Nerella et al. AUTOMATION IN CONSTRUCTION
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC 3 )
- (2018) Yuvaraj Dhandapani et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Non-adsorbing polymers and yield stress of cement paste: Effect of depletion forces
- (2018) Hela Bessaies-Bey et al. CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Admixture compatibility in metakaolin–portland-limestone cement blends
- (2018) Behnaz H. Zaribaf et al. MATERIALS AND STRUCTURES
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Impacting factors and properties of limestone calcined clay cements (LC3)
- (2018) Karen Scrivener et al. Green Materials
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Molecular and submolecular scale effects of comb-copolymers on tri-calcium silicate reactivity: Toward molecular design
- (2017) Delphine Marchon et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC
- (2017) Wei Huang et al. MATERIALS & DESIGN
- Calcined clay limestone cements (LC3)
- (2017) Karen Scrivener et al. CEMENT AND CONCRETE RESEARCH
- Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
- (2016) François Avet et al. CEMENT AND CONCRETE RESEARCH
- Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A–CaSO4 hydration
- (2015) Florent Dalas et al. CEMENT AND CONCRETE RESEARCH
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- Understanding the Filler Effect on the Nucleation and Growth of C-S-H
- (2014) E. Berodier et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Slurry of metakaolin combined with limestone addition for self-compacted concrete. Application for precast industry
- (2013) Céline Perlot et al. CEMENT & CONCRETE COMPOSITES
- Concrete mix design based on water film thickness and paste film thickness
- (2013) Leo G. Li et al. CEMENT & CONCRETE COMPOSITES
- The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash
- (2013) Kirk Vance et al. CEMENT AND CONCRETE RESEARCH
- Effect of metakaolin dispersion on the fresh and hardened state properties of concrete
- (2012) H. Paiva et al. CEMENT AND CONCRETE RESEARCH
- Cement substitution by a combination of metakaolin and limestone
- (2012) M. Antoni et al. CEMENT AND CONCRETE RESEARCH
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Developments in construction-scale additive manufacturing processes
- (2011) S. Lim et al. AUTOMATION IN CONSTRUCTION
- Superfine cement for improving packing density, rheology and strength of cement paste
- (2011) J.J. Chen et al. CEMENT & CONCRETE COMPOSITES
- The origins of thixotropy of fresh cement pastes
- (2011) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- Water Adsorption on Clay Minerals As a Function of Relative Humidity: Application of BET and Freundlich Adsorption Models
- (2011) Courtney D. Hatch et al. LANGMUIR
- Role of water film thickness in rheology of CSF mortar
- (2010) W.W.S. Fung et al. CEMENT & CONCRETE COMPOSITES
- Mortar design based on water film thickness
- (2010) L.G. Li et al. CONSTRUCTION AND BUILDING MATERIALS
- Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts
- (2009) Anatol Zingg et al. CEMENT & CONCRETE COMPOSITES
- Investigation on the influence of granular packing on the flow properties of cementitious suspensions
- (2008) Prakash Nanthagopalan et al. CEMENT & CONCRETE COMPOSITES
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now