Multiphysics multi-scale computational framework for linking process–structure–property relationships in metal additive manufacturing: a critical review
出版年份 2023 全文链接
标题
Multiphysics multi-scale computational framework for linking process–structure–property relationships in metal additive manufacturing: a critical review
作者
关键词
-
出版物
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-67
出版商
Informa UK Limited
发表日期
2023-02-16
DOI
10.1080/09506608.2023.2169501
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys
- (2022) Joseph N. Ghoussoub et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Micromechanical Modeling of AlSi10Mg Processed by Laser-Based Additive Manufacturing: From as-Built to Heat-Treated Microstructures
- (2022) Aravindh Nammalvar Raja Rajan et al. Materials
- Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks
- (2021) Qiming Zhu et al. COMPUTATIONAL MECHANICS
- Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting
- (2021) Germán Omar Barrionuevo et al. The International Journal of Advanced Manufacturing Technology
- Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V
- (2021) Mangesh V. Pantawane et al. Scientific Reports
- A Meshfree computational framework for the numerical simulation of the solid-state additive manufacturing process, additive friction stir-deposition (AFS-D)
- (2021) G.G. Stubblefield et al. MATERIALS & DESIGN
- Mesoscopic-scale numerical investigation including the influence of scanning strategy on selective laser melting process
- (2021) Liu Cao COMPUTATIONAL MATERIALS SCIENCE
- Numerical Study on Powder Stream Characteristics of Coaxial Laser Metal Deposition Nozzle
- (2021) Liqun Li et al. Crystals
- Micromechanical modeling approach to single track deformation, phase transformation and residual stress evolution during selective laser melting using crystal plasticity
- (2021) Matti Lindroos et al. Additive Manufacturing
- Optimizing the cellular automata finite element model for additive manufacturing to simulate large microstructures
- (2021) Kirubel Teferra et al. ACTA MATERIALIA
- Digital materials design by thermal-fluid science for multi-metal additive manufacturing
- (2021) Junji Shinjo et al. ACTA MATERIALIA
- A physics-informed machine learning approach for solving heat transfer equation in advanced manufacturing and engineering applications
- (2021) Navid Zobeiry et al. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE
- Simulation and analysis of LPBF multi-layer single-track forming process under different particle size distributions
- (2021) Liu Cao et al. The International Journal of Advanced Manufacturing Technology
- An efficient predictive modeling for simulating part-scale residual stress in laser metal deposition process
- (2021) Lan Li et al. The International Journal of Advanced Manufacturing Technology
- Machine learning-based optimization of process parameters in selective laser melting for biomedical applications
- (2021) Hong Seok Park et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Erratum: “Transient dynamics and stability of keyhole at threshold in laser powder bed fusion regime investigated by finite element modeling” [J. Laser Appl. 33, 012024 (2021)]
- (2021) Yaasin A. Mayi et al. JOURNAL OF LASER APPLICATIONS
- Thermomechanically influenced dynamic elastic constants of laser powder bed fusion additively manufactured Ti6Al4V
- (2021) Mangesh V. Pantawane et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Spatial Variation of Thermokinetics and Associated Microstructural Evolution in Laser Surface Engineered IN718: Precursor to Additive Manufacturing
- (2021) Mangesh V. Pantawane et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of spreader geometry on powder spreading process in powder bed additive manufacturing
- (2021) Lin Wang et al. POWDER TECHNOLOGY
- Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges
- (2021) Damien Tourret et al. PROGRESS IN MATERIALS SCIENCE
- Modeling and simulation of heat transfer, fluid flow and geometry morphology in GMAW-based wire arc additive manufacturing
- (2021) Wenyong Zhao et al. Welding in the World
- Universal scaling laws of keyhole stability and porosity in 3D printing of metals
- (2021) Zhengtao Gan et al. Nature Communications
- Modelling and experimental observation of the deposition geometry and microstructure evolution of aluminum alloy fabricated by wire-arc additive manufacturing
- (2021) Ruwei Geng et al. Journal of Manufacturing Processes
- Alloy design against the solidification cracking in fusion additive manufacturing: an application to a FeCrAl alloy
- (2021) Bogdan Dovgyy et al. Materials Research Letters
- Crystallographic texture evolution in electron beam melting additive manufacturing of pure Molybdenum
- (2021) Patxi Fernandez-Zelaia et al. MATERIALS & DESIGN
- Experimental and numerical studies on fabrication of nanoparticle reinforced aluminum matrix composites by friction stir additive manufacturing
- (2021) Zhijun Tan et al. Journal of Materials Research and Technology-JMR&T
- Simulation of powder bed metal additive manufacturing microstructures with coupled finite difference-Monte Carlo method
- (2021) Theron M. Rodgers et al. Additive Manufacturing
- Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V
- (2021) Mangesh V. Pantawane et al. ACTA MATERIALIA
- Part scale estimation of residual stress development in laser powder bed fusion additive manufacturing of Inconel 718
- (2021) Patcharapit Promoppatum et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- A comprehensive review on sustainable cold spray additive manufacturing: State of the art, challenges and future challenges
- (2021) Gaurav Prashar et al. Journal of Cleaner Production
- Thermodynamically consistent phase-field modeling of competitive polycrystalline growth of beta grains during additive manufacturing of Ti6Al4V
- (2021) Shunyu Liu et al. JOURNAL OF CRYSTAL GROWTH
- A Physics-Informed Two-Level Machine-Learning Model for Predicting Melt-Pool Size in Laser Powder Bed Fusion
- (2021) Yong Ren et al. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME
- Defects in Metal Additive Manufacturing Processes
- (2021) M. C. Brennan et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Simulation of solidified β grain for Ti–6Al–4V during wire laser additive manufacturing by three-dimensional cellular automaton method
- (2021) Weizhao Sun et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Computer simulation of microstructure development in powder-bed additive manufacturing with crystallographic texture
- (2021) J G Pauza et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Modeling of effect of powder spreading on green body dimensional accuracy in additive manufacturing by binder jetting
- (2021) A.L. Maximenko et al. POWDER TECHNOLOGY
- The State of the Art of Material Jetting—A Critical Review
- (2021) Orhan Gülcan et al. Polymers
- Predicting Susceptibility to Solidification Cracking and Liquation Cracking by CALPHAD
- (2021) Sindo Kou Metals
- 3D Printing of Multilayered and Multimaterial Electronics: A Review
- (2021) Guo Liang Goh et al. Advanced Electronic Materials
- Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: Integrated experimental and computational approach
- (2021) Sameehan S. Joshi et al. Journal of Manufacturing Processes
- Physics-based and phenomenological plasticity models for thermomechanical simulation in laser powder bed fusion additive manufacturing: A comprehensive numerical comparison
- (2021) Patcharapit Promoppatum et al. MATERIALS & DESIGN
- Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review
- (2021) Prveen Bidare et al. Advances in Manufacturing
- Physics-informed machine learning and mechanistic modeling of additive manufacturing to reduce defects
- (2021) Y. Du et al. Applied Materials Today
- Numerical Simulation and Experimental Measurement of Pressureless Sintering of Stainless Steel Part Printed by Binder Jetting Additive Manufacturing
- (2021) Kaiwen Zhang et al. Additive Manufacturing
- On the role of the powder stream on the heat and fluid flow conditions during Directed Energy Deposition of maraging steel—Multiphysics modeling and experimental validation
- (2021) Mohamad Bayat et al. Additive Manufacturing
- Powder spreading, densification, and part deformation in binder jetting additive manufacturing
- (2021) Yousub Lee et al. Progress in Additive Manufacturing
- Effect of Spatially Varying Thermokinetics on the Electrochemical Response of Laser Additively Manufactured Ti6Al4V
- (2021) Yee-Hsien Ho et al. ADVANCED ENGINEERING MATERIALS
- A physics-informed machine learning method for predicting grain structure characteristics in directed energy deposition
- (2021) Dmitriy Kats et al. COMPUTATIONAL MATERIALS SCIENCE
- Establishing specimen property to part performance relationships for laser beam powder bed fusion additive manufacturing
- (2021) Arash Soltani-Tehrani et al. INTERNATIONAL JOURNAL OF FATIGUE
- Quantitative investigation of gas flow, powder-gas interaction, and powder behavior under different ambient pressure levels in laser powder bed fusion
- (2021) Xuxiao Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A Simulation Study on the Effect of Particle Size Distribution on the Printed Geometry in Selective Laser Melting
- (2021) Vaishak Ramesh Sagar et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Machine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm
- (2021) Shenghan Guo et al. JOURNAL OF MANUFACTURING SYSTEMS
- A metal–metal powder formulation approach for laser additive manufacturing of difficult-to-print high-strength aluminum alloys
- (2021) Robyn L. Bradford et al. MATERIALS LETTERS
- Toward multiscale simulations of tailored microstructure formation in metal additive manufacturing
- (2021) Joel Berry et al. Materials Today
- CMT-Based Wire Arc Additive Manufacturing Using 316L Stainless Steel (2): Solidification Map of the Multilayer Deposit
- (2021) Jaewoong Park et al. Metals
- Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition
- (2021) Boxue Song et al. Additive Manufacturing
- Multi-physics modeling of side roughness generation mechanisms in powder bed fusion
- (2021) Chaochao Wu et al. Additive Manufacturing
- A novel high-efficient finite element analysis method of powder bed fusion additive manufacturing
- (2021) Yang Cao et al. Additive Manufacturing
- Phase-field modeling of grain evolution in additive manufacturing with addition of reinforcing particles
- (2021) Min Yang et al. Additive Manufacturing
- Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys
- (2021) W.C. Ke et al. Additive Manufacturing
- Analytical estimation of fusion zone dimensions and cooling rates in part scale laser powder bed fusion
- (2021) P. Zagade et al. Additive Manufacturing
- Towards developing multiscale-multiphysics models and their surrogates for digital twins of metal additive manufacturing
- (2021) D.R. Gunasegaram et al. Additive Manufacturing
- Crack free metal printing using physics informed machine learning
- (2021) B. Mondal et al. ACTA MATERIALIA
- Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion
- (2021) Gan Li et al. OPTICS AND LASER TECHNOLOGY
- Physics of humping formation in laser powder bed fusion
- (2020) C. Tang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Integration of phase-field model and crystal plasticity for the prediction of process-structure-property relation of additively manufactured metallic materials
- (2020) P.W. Liu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Advances in additive manufacturing of metal-based functionally graded materials
- (2020) Ashley Reichardt et al. INTERNATIONAL MATERIALS REVIEWS
- A brief review of data-driven ICME for intelligently discovering advanced structural metal materials: Insight into atomic and electronic building blocks
- (2020) William Yi Wang et al. JOURNAL OF MATERIALS RESEARCH
- Coupled Eulerian-Lagrangian (CEL) simulation of multiple particle impact during Metal Cold Spray process for coating porosity prediction
- (2020) Xu Song et al. SURFACE & COATINGS TECHNOLOGY
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Numerical analysis of the effect of the scan strategy on the residual stress in the multi-laser selective laser melting
- (2020) Sheng Zou et al. Results in Physics
- On the effect of shielding gas flow on porosity and melt pool geometry in laser powder bed fusion additive manufacturing
- (2020) Joni Reijonen et al. Additive Manufacturing
- Effects of electron beam manufacturing induced defects on fracture in Inconel 718
- (2020) D.M. Bond et al. Additive Manufacturing
- A physics-driven deep learning model for process-porosity causal relationship and porosity prediction with interpretability in laser metal deposition
- (2020) Weihong "Grace" Guo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Predicting microstructure-dependent mechanical properties in additively manufactured metals with machine- and deep-learning methods
- (2020) Carl Herriott et al. COMPUTATIONAL MATERIALS SCIENCE
- Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting
- (2020) Heng Gu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Machine Learning in Additive Manufacturing: A Review
- (2020) Lingbin Meng et al. JOM
- Prediction of geometry deviations in additive manufactured parts: comparison of linear regression with machine learning algorithms
- (2020) Ivanna Baturynska et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
- (2020) Chao Liu et al. JOURNAL OF MANUFACTURING SYSTEMS
- In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites
- (2020) Yee-Hsien Ho et al. Materials Science & Engineering C-Materials for Biological Applications
- Mesoscopic-Scale Numerical Simulation Including the Influence of Process Parameters on SLM Single-Layer Multi-pass Formation
- (2020) Liu Cao METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Sparse Thermal Data for Cellular Automata Modeling of Grain Structure in Additive Manufacturing
- (2020) Matthew Rolchigo et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Manufacturing of Ti6Al4V Alloy
- (2020) Mangesh V. Pantawane et al. Scientific Reports
- Determination of the control points for circle and triangle route in wire arc additive manufacturing (WAAM)
- (2020) W. Ou et al. Journal of Manufacturing Processes
- Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V
- (2020) Mangesh V. Pantawane et al. Materials Research Letters
- Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: a correlation between in situ pyrometry and ex situ X-ray radiography
- (2020) Jean-Baptiste Forien et al. Additive Manufacturing
- Numerical modelling of heat transfer, mass transport and microstructure formation in a high deposition rate laser directed energy deposition process
- (2020) Zhe Sun et al. Additive Manufacturing
- Stable layer-building strategy to enhance cold-spray-based additive manufacturing
- (2020) Hongjian Wu et al. Additive Manufacturing
- Laser additive manufacturing of Mg-based composite with improved degradation behaviour
- (2020) Youwen Yang et al. Virtual and Physical Prototyping
- Machine learning based hierarchy of causative variables for tool failure in friction stir welding
- (2020) Y. Du et al. ACTA MATERIALIA
- Controlling the porosity using exponential decay heat input regimes during electron beam wire-feed additive manufacturing of Al-Mg alloy
- (2020) V. R. Utyaganova et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Plasma transfer arc additive manufacturing of 17-4 PH: assessment of defects
- (2020) Sandy N. El Moghazi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Solid-State Metal Additive Manufacturing: A Review
- (2020) Nihan Tuncer et al. JOM
- Metal Binder Jetting Additive Manufacturing: A Literature Review
- (2020) Ming Li et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Numerical investigation of a novel pattern for reducing residual stress in metal additive manufacturing
- (2020) Li Sun et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Binder jet 3D printing – Process parameters, materials, properties, and challenges
- (2020) Amir Mostafaei et al. PROGRESS IN MATERIALS SCIENCE
- Mechanistic models for additive manufacturing of metallic components
- (2020) H.L. Wei et al. PROGRESS IN MATERIALS SCIENCE
- Residual stress measurement techniques for Ti6Al4V parts fabricated using selective laser melting: state of the art review
- (2020) Ruben B.O. Acevedo et al. RAPID PROTOTYPING JOURNAL
- Internal surface roughness enhancement of parts made by laser powder-bed fusion additive manufacturing
- (2020) Usman Ali et al. VACUUM
- Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: State of the art review
- (2020) R. Acevedo et al. Journal of Materials Research and Technology-JMR&T
- Prediction of spatiotemporal variations of deposit profiles and inter-track voids during laser directed energy deposition
- (2020) H.L. Wei et al. Additive Manufacturing
- Mechanisms on inter-track void formation and phase transformation during laser Powder Bed Fusion of Ti-6Al-4V
- (2020) H.L. Wei et al. Additive Manufacturing
- Correlations between thermal history and keyhole porosity in laser powder bed fusion
- (2020) Noah H. Paulson et al. Additive Manufacturing
- Numerical modeling of coaxial powder stream in laser-powder-based Directed Energy Deposition process
- (2020) Xiaoyi Guan et al. Additive Manufacturing
- Electromagnetic wave-based analysis of laser–particle interactions in directed energy deposition additive manufacturing
- (2020) Z. Zhang et al. Additive Manufacturing
- Scanning strategies effect on temperature, residual stress and deformation by multi-laser beam powder bed fusion manufacturing
- (2020) Wenyou Zhang et al. Additive Manufacturing
- On the varieties of build features during multi-layer laser directed energy deposition
- (2020) F.Q. Liu et al. Additive Manufacturing
- A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design
- (2020) Paolo Ferro et al. The International Journal of Advanced Manufacturing Technology
- Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
- (2020) Carolin Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review on residual stress in selective laser melting additive manufacturing of alloy parts
- (2020) Ze-Chen Fang et al. OPTICS AND LASER TECHNOLOGY
- Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
- (2020) Niloofar Sanaei et al. PROGRESS IN MATERIALS SCIENCE
- Comparison of Substrate Preheating on Mechanical and Microstructural Properties of Hybrid Specimens Fabricated by Laser Metal Deposition 316 L with Different Wrought Steel Substrate
- (2020) Yuhui Zhao et al. Crystals
- Numerical analysis of powder bed generation and single track forming for selective laser melting of SS316L stainless steel
- (2020) Yunfu Tian et al. Journal of Manufacturing Processes
- Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy
- (2020) Jiwon Park et al. MATERIALS & DESIGN
- Metallurgy, mechanistic models and machine learning in metal printing
- (2020) T. DebRoy et al. Nature Reviews Materials
- In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing
- (2020) Yunhui Chen et al. Applied Materials Today
- Numerical study of the impact of vaporisation on melt pool dynamics in Laser Powder Bed Fusion - Application to IN718 and Ti–6Al–4V
- (2020) Alexis Queva et al. Additive Manufacturing
- Predictive modeling of laser and electron beam powder bed fusion additive manufacturing of metals at the mesoscale
- (2020) Andrey Zakirov et al. Additive Manufacturing
- Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging
- (2020) Xuxiao Li et al. Additive Manufacturing
- Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition
- (2020) Himani Siva Prasad et al. Additive Manufacturing
- Influence of material constitutive models on thermomechanical behaviors in the laser powder bed fusion of Ti-6Al-4V
- (2020) Patcharapit Promoppatum et al. Additive Manufacturing
- Invited Review: Machine Learning for Materials Developments in Metals Additive Manufacturing
- (2020) N.S. Johnson et al. Additive Manufacturing
- Improved Grain Structure Prediction in Metal Additive Manufacturing Using a Dynamic Kinetic Monte Carlo Framework
- (2020) Sumair Sunny et al. Additive Manufacturing
- Dynamic Recrystallization and Recovery in Very High‐Power Ultrasonic Additive Manufacturing
- (2020) Peng Li et al. ADVANCED ENGINEERING MATERIALS
- Three-dimensional phase field sintering simulations accounting for the rigid-body motion of individual grains
- (2020) Robert Termuhlen et al. COMPUTATIONAL MATERIALS SCIENCE
- Machine learning integrated design for additive manufacturing
- (2020) Jingchao Jiang et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- Additive friction stir deposition: a deformation processing route to metal additive manufacturing
- (2020) Hang Z. Yu et al. Materials Research Letters
- Machine learning in additive manufacturing: State-of-the-art and perspectives
- (2020) C. Wang et al. Additive Manufacturing
- Dynamic investigation on the powder spreading during selective laser melting additive manufacturing
- (2020) Dengzhi Yao et al. Additive Manufacturing
- Effect of crack-like defects on the fracture behaviour of Wire + Arc Additively Manufactured nickel-base Alloy 718
- (2020) Cui E. Seow et al. Additive Manufacturing
- Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process
- (2020) Zachary A. Young et al. Additive Manufacturing
- 3D heat transfer, fluid flow and electromagnetic model for cold metal transfer wire arc additive manufacturing (Cmt-Waam)
- (2020) S. Cadiou et al. Additive Manufacturing
- Defect structure process maps for laser powder bed fusion additive manufacturing
- (2020) Jerard V. Gordon et al. Additive Manufacturing
- Implementation of nucleation in cellular automaton simulation of microstructural evolution during additive manufacturing of Al alloys
- (2020) Mohammad Sadegh Mohebbi et al. Additive Manufacturing
- In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites
- (2020) Yee-Hsien Ho et al. Bioactive Materials
- An improved heat transfer and fluid flow model of wire-arc additive manufacturing
- (2020) W. Ou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Additive manufacturing of advanced ceramic materials
- (2020) Y. Lakhdar et al. PROGRESS IN MATERIALS SCIENCE
- Hot-wire arc additive manufacturing of aluminum alloy with reduced porosity and high deposition rate
- (2020) Rui Fu et al. MATERIALS & DESIGN
- Numerical prediction of grain structure formation during laser powder bed fusion of 316 L stainless steel
- (2020) Anaïs Baumard et al. MATERIALS & DESIGN
- A critical insight into lack-of-fusion pore structures in additively manufactured stainless steel
- (2020) Majid Laleh et al. Additive Manufacturing
- Multiscale and multiphysics explorations of the transient deposition processes and additive characteristics during laser 3D printing
- (2020) H.L. Wei et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Evaluation of the impact of scanning strategies on residual stresses in selective laser melting
- (2019) L. Mugwagwa et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- Machine learning-based image processing for on-line defect recognition in additive manufacturing
- (2019) Alessandra Caggiano et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
- (2019) J.A. Koepf et al. COMPUTATIONAL MATERIALS SCIENCE
- Digital Twin in Industry: State-of-the-Art
- (2019) Fei Tao et al. IEEE Transactions on Industrial Informatics
- Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
- (2019) Holly D. Carlton et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- A thermo-metallurgical-mechanical model for selective laser melting of Ti6Al4V
- (2019) Pengfei Tan et al. MATERIALS & DESIGN
- Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms
- (2019) Qingbo Jia et al. ACTA MATERIALIA
- Experimental and numerical studies of re-stirring and re-heating effects on mechanical properties in friction stir additive manufacturing
- (2019) Z. Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
- (2019) Aamer Nazir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The third Sandia fracture challenge: predictions of ductile fracture in additively manufactured metal
- (2019) Sharlotte L. B. Kramer et al. INTERNATIONAL JOURNAL OF FRACTURE
- Uncertainty Quantification in Metallic Additive Manufacturing Through Physics-Informed Data-Driven Modeling
- (2019) Zhuo Wang et al. JOM
- Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response
- (2019) Rongpei Shi et al. JOM
- A Numerical Study on the Keyhole Formation During Laser Powder Bed Fusion Process
- (2019) Subin Shrestha et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
- (2019) W.H. Yu et al. PROGRESS IN MATERIALS SCIENCE
- Influence of interlayer dwell time on stress field of thin-walled components in WAAM via numerical simulation and experimental tests
- (2019) Rong Li et al. RAPID PROTOTYPING JOURNAL
- Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
- (2019) Nadia Kouraytem et al. Physical Review Applied
- Kinetic Monte Carlo simulation of sintering behavior of additively manufactured stainless steel powder particles using reconstructed microstructures from synchrotron X-ray microtomography
- (2019) Yi Zhang et al. Results in Physics
- Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V
- (2019) R.K. Ganeriwala et al. Additive Manufacturing
- Residual stress prediction in selective laser melting
- (2019) Leonardo Bertini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A novel method for the molten pool and porosity formation modelling in selective laser melting
- (2019) Min Zheng et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Process Design of Laser Powder Bed Fusion of Stainless Steel Using a Gaussian Process-Based Machine Learning Model
- (2019) Lingbin Meng et al. JOM
- Additive manufacturing of functionally graded materials: A review
- (2019) Chi Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics
- (2019) Asier Lores et al. POWDER METALLURGY
- New scanning strategy to reduce warpage in additive manufacturing
- (2019) Davi Ramos et al. Additive Manufacturing
- An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering
- (2019) Qian Chen et al. Additive Manufacturing
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- Modeling of solidification microstructure evolution in laser powder bed fusion fabricated 316L stainless steel using combined computational fluid dynamics and cellular automata
- (2019) Yi Zhang et al. Additive Manufacturing
- Resolution, energy and time dependency on layer scaling in finite element modelling of laser beam powder bed fusion additive manufacturing
- (2019) Wenyou Zhang et al. Additive Manufacturing
- Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation
- (2019) Mohamad Bayat et al. Additive Manufacturing
- A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)
- (2019) Binqi Liu et al. APPLIED MATHEMATICAL MODELLING
- Effect of overlap rate and pattern on residual stress in selective laser melting
- (2019) Changpeng Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On the study of keyhole-mode melting in selective laser melting process
- (2019) K.Q. Le et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Microstructure and mechanical properties of as-deposited and heat treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) alloy fabricated by laser melting deposition
- (2019) Hao Deng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Three-Dimensional Modeling of Cold Spray for Additive Manufacturing
- (2019) S. Garmeh et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Microstructure and mechanical properties of laser metal deposited AlSi10Mg alloys
- (2019) Xian Wang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Integrated Modeling of Process–Microstructure–Property Relations in Friction Stir Additive Manufacturing
- (2019) Zhao Zhang et al. Acta Metallurgica Sinica-English Letters
- Spreading Process Maps for Powder-Bed Additive Manufacturing Derived from Physics Model-Based Machine Learning
- (2019) Prathamesh S. Desai et al. Metals
- Microstructure modelling for metallic additive manufacturing: a review
- (2019) Joel Heang Kuan Tan et al. Virtual and Physical Prototyping
- Heat transfer, fluid flow and electromagnetic model of droplets generation and melt pool behaviour for wire arc additive manufacturing
- (2019) S. Cadiou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Influence of surface tension on the molten pool morphology in laser melting
- (2019) Shibai Liu et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Hot-wire arc additive manufacturing Ti–6.5Al–2Zr–1Mo–1V titanium alloy: Pore characterization, microstructural evolution, and mechanical properties
- (2019) Tao Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Friction stir welding of additively manufactured Ti-6Al-4V: Microstructure and mechanical properties
- (2019) Amit Kumar Singh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Loss of elemental Mg during wire + arc additive manufacturing of Al-Mg alloy and its effect on mechanical properties
- (2019) Tao Yuan et al. Journal of Manufacturing Processes
- Numerical verification of an Octree mesh coarsening strategy for simulating additive manufacturing processes
- (2019) Chao Li et al. Additive Manufacturing
- Fast simulation of temperature and phase transitions in directed energy deposition additive manufacturing
- (2019) Daniel Weisz-Patrault Additive Manufacturing
- Correlation between forming quality and spatter dynamics in laser powder bed fusion
- (2019) Jie Yin et al. Additive Manufacturing
- Simulation of melt pool behaviour during additive manufacturing: Underlying physics and progress
- (2019) Peter S. Cook et al. Additive Manufacturing
- 3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
- (2018) Johannes A. Koepf et al. ACTA MATERIALIA
- Phase field simulation of powder bed-based additive manufacturing
- (2018) Liang-Xing Lu et al. ACTA MATERIALIA
- Phase field modeling of sintering: Role of grain orientation and anisotropic properties
- (2018) Sudipta Biswas et al. COMPUTATIONAL MATERIALS SCIENCE
- Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Three-dimensional modeling of the microstructure evolution during metal additive manufacturing
- (2018) O. Zinovieva et al. COMPUTATIONAL MATERIALS SCIENCE
- Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing
- (2018) Xuxiao Li et al. COMPUTATIONAL MATERIALS SCIENCE
- An integrated process–structure–property modeling framework for additive manufacturing
- (2018) Wentao Yan et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Empirical methodology to determine inherent strains in additive manufacturing
- (2018) Iñaki Setien et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- A numerical investigation on the physical mechanisms of single track defects in selective laser melting
- (2018) C. Tang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Modeling temperature and residual stress fields in selective laser melting
- (2018) Yingli Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fundamental analysis of the influence of powder characteristics in Selective Laser Melting of molybdenum based on a multi-physical simulation model
- (2018) K.-H. Leitz et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing
- (2018) Igor Polozov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On the Simulation Scalability of Predicting Residual Stress and Distortion in Selective Laser Melting
- (2018) C. Li et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Modeling Particle Spray and Capture Efficiency for Direct Laser Deposition Using a Four Nozzle Powder Injection System
- (2018) Christopher Katinas et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Phase-Field Modeling of Nugget Zone for a AZ31-Mg-Alloy Friction Stir Weld
- (2018) C. G. Prosgolitis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing
- (2018) Neda Mohammadian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing
- (2018) P.W. Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solid-state additive manufacturing and repairing by cold spraying: A review
- (2018) Wenya Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing
- (2018) Niyanth Sridharan et al. MATERIALS CHARACTERIZATION
- Dislocation network in additive manufactured steel breaks strength–ductility trade-off
- (2018) Leifeng Liu et al. Materials Today
- A Computational Study on Porosity Evolution in Parts Produced by Selective Laser Melting
- (2018) J. L. Tan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Direct numerical simulation of mechanical response in synthetic additively manufactured microstructures
- (2018) Theron M Rodgers et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel
- (2018) Yang Liu et al. OPTICS AND LASER TECHNOLOGY
- Role of scanning strategy on residual stress distribution in Ti-6Al-4V alloy prepared by selective laser melting
- (2018) Jia Song et al. OPTIK
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Investigation of cavitation erosion resistance of AlSi10Mg alloy for additive manufacturing
- (2018) Luca Girelli et al. WEAR
- Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
- (2018) Zhongji Sun et al. NPG Asia Materials
- Micromechanics modeling of metallic alloys 3D printed by selective laser melting
- (2018) Mohsen Taheri Andani et al. MATERIALS & DESIGN
- Meso-scale modeling of multiple-layer fabrication process in Selective Electron Beam Melting: Inter-layer/track voids formation
- (2018) Wentao Yan et al. MATERIALS & DESIGN
- Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
- (2018) Shiwen Liu et al. MATERIALS & DESIGN
- Powder-scale multi-physics modeling of multi-layer multi-track selective laser melting with sharp interface capturing method
- (2018) Zekun Wang et al. COMPUTATIONAL MECHANICS
- Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
- (2018) W. Ou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
- (2018) Jinliang Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing
- (2018) Kartik Kapoor et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Residual stresses in single particle splat of metal cold spray process – Numerical simulation and direct measurement
- (2018) Xu Song et al. MATERIALS LETTERS
- Microstructure simulations of Inconel 718 during selective laser melting using a phase field model
- (2018) Xiaoqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior
- (2018) Akash Aggarwal et al. JOM
- Additive manufacturing of functionally graded transition joints between ferritic and austenitic alloys
- (2018) J.S. Zuback et al. JOURNAL OF ALLOYS AND COMPOUNDS
- New insights on the relationship between flow stress softening and dynamic recrystallization behavior of magnesium alloy AZ31B
- (2018) Ming-Song Chen et al. MATERIALS CHARACTERIZATION
- A multi-scale, multi-physics modeling framework to predict spatial variation of properties in additive-manufactured metals
- (2018) Carl Frank Herriott et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- 3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity
- (2018) Zhidong Zhang et al. OPTICS AND LASER TECHNOLOGY
- A review of computational modeling in powder-based additive manufacturing for metallic part qualification
- (2018) Jingfu Liu et al. RAPID PROTOTYPING JOURNAL
- Additive Manufacturing of Cobalt-Based Dental Alloys: Analysis of Microstructure and Physicomechanical Properties
- (2018) Leonhard Hitzler et al. Advances in Materials Science and Engineering
- Thermo-Mechanical Modelling of Wire-Arc Additive Manufacturing (WAAM) of Semi-Finished Products
- (2018) Marcel Graf et al. Metals
- Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing
- (2018) Hang Zheng et al. Journal of Manufacturing Processes
- Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes
- (2018) K. Ren et al. MATERIALS & DESIGN
- On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting
- (2018) Dongdong Gu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microstructure evolution and mechanical properties of laser additive manufacturing of high strength Al-Cu-Mg alloy
- (2018) Tao Gu et al. OPTICS AND LASER TECHNOLOGY
- Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V
- (2018) Ashish Kumar Mishra et al. OPTICS AND LASER TECHNOLOGY
- Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing
- (2017) Zhengtao Gan et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel
- (2017) Gustavo Tapia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V
- (2017) Mohsen Seifi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel
- (2017) Zhengtao Gan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron
- (2017) Zhengtao Gan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method
- (2017) Hui Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
- (2017) Martin Diehl et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture
- (2017) Fengying Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
- (2017) A.B. Spierings et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing
- (2017) Abhay Sharma et al. Journal of Manufacturing Processes
- Laser additive processing of a functionally graded internal fracture fixation plate
- (2017) D.D. Lima et al. MATERIALS & DESIGN
- Using laser cutting as a source of molten droplets for additive manufacturing: A new recycling technique
- (2017) Ramiz S.M. Samarjy et al. MATERIALS & DESIGN
- Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation
- (2017) J. Ahn et al. MATERIALS & DESIGN
- Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
- (2017) Qian Wang et al. MATERIALS & DESIGN
- A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion
- (2017) Patcharapit Promoppatum et al. Engineering
- Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
- (2017) Sonny Ly et al. Scientific Reports
- Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: Experimental investigation
- (2016) L. Wang et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Three-dimensional simulation of micrometer-sized droplet impact and penetration into the powder bed
- (2016) Hua Tan CHEMICAL ENGINEERING SCIENCE
- Finite element simulation and experimental investigation of residual stresses in selective laser melted Ti–Ni shape memory alloy
- (2016) Dongdong Gu et al. COMPUTATIONAL MATERIALS SCIENCE
- A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
- (2016) Abha Rai et al. COMPUTATIONAL MATERIALS SCIENCE
- Discrete element modeling of particle-based additive manufacturing processes
- (2016) John C. Steuben et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625
- (2016) Luis E. Criales et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
- (2016) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Achieving biocompatible stiffness in NiTi through additive manufacturing
- (2016) Mohsen Taheri Andani et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- Distortions and Residual Stresses at Layer-by-Layer Additive Manufacturing by Fusion
- (2016) V. A. Safronov et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Electrodynamic simulation of energy absorption in laser keyhole welding of zinc-coated and uncoated steel sheets
- (2016) Chun Deng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A multiscale modeling approach for fast prediction of part distortion in selective laser melting
- (2016) C. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Build Direction Effects on Additively Manufactured Channels
- (2016) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Powder Bed Layer Characteristics: The Overseen First-Order Process Input
- (2016) H. W. Mindt et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys
- (2016) Y. Ding et al. MRS BULLETIN
- Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites
- (2016) Qimin Shi et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and mechanical property characterisation of aluminium–steel joints fabricated using ultrasonic additive manufacturing
- (2016) Niyanth Sridharan et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and texture evolution in aluminum and commercially pure titanium dissimilar welds fabricated using ultrasonic additive manufacturing
- (2016) Niyanth Sridharan et al. SCRIPTA MATERIALIA
- Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
- (2016) Jing Guo et al. Materials
- Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
- (2016) A. Zinoviev et al. MATERIALS & DESIGN
- Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: A computational framework
- (2016) Arman Ahmadi et al. MATERIALS & DESIGN
- Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
- (2016) Ali Foroozmehr et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys
- (2015) L. Wang et al. ACTA MATERIALIA
- Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy
- (2015) Julia Kundin et al. ACTA MATERIALIA
- Formation characteristic, microstructure, and mechanical performances of aluminum-based components by friction stir additive manufacturing
- (2015) Mao Yuqing et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A finite element model of thermal evolution in laser micro sintering
- (2015) Jie Yin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy
- (2015) Parviz Asadi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Advances in the modeling of laser direct metal deposition
- (2015) Andrew J. Pinkerton JOURNAL OF LASER APPLICATIONS
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
- (2015) Erik R. Denlinger et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
- (2015) C. Panwisawas et al. SCRIPTA MATERIALIA
- Surface texture measurement for additive manufacturing
- (2015) Andrew Triantaphyllou et al. Surface Topography-Metrology and Properties
- Implementation of a thermomechanical model for the simulation of selective laser melting
- (2014) N. E. Hodge et al. COMPUTATIONAL MECHANICS
- Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam
- (2014) Matthias Markl et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- Effect of Thermal Deformation on Part Errors in Metal Powder Based Additive Manufacturing Processes
- (2014) Ratnadeep Paul et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation model of selective laser melting of stainless steel powder
- (2014) Saad A. Khairallah et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tribological and corrosion properties of Al–12Si produced by selective laser melting
- (2014) K.G. Prashanth et al. JOURNAL OF MATERIALS RESEARCH
- Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
- (2014) V. Manvatkar et al. MATERIALS SCIENCE AND TECHNOLOGY
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser
- (2014) Parisa Farahmand et al. OPTICS AND LASER TECHNOLOGY
- Residual stress via the contour method in compact tension specimens produced via selective laser melting
- (2014) Bey Vrancken et al. SCRIPTA MATERIALIA
- Numerical and experimental investigations on laser melting of stainless steel 316L metal powders
- (2014) Kurian Antony et al. Journal of Manufacturing Processes
- Investigations on Temperature Fields during Laser Beam Melting by Means of Process Monitoring and Multiscale Process Modelling
- (2014) J. Schilp et al. Advances in Mechanical Engineering
- A computationally efficient finite element model of wire and arc additive manufacture
- (2013) J. Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A new approach to compute multi-reflections of laser beam in a keyhole for heat transfer and fluid flow modelling in laser welding
- (2013) Mickael Courtois et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
- (2013) Ahmed Hussein et al. MATERIALS & DESIGN
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
- (2013) Kai Guan et al. MATERIALS & DESIGN
- Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys
- (2012) V. Fallah et al. ACTA MATERIALIA
- Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
- (2012) M. Smith et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition
- (2012) J. Yu et al. MATERIALS & DESIGN
- Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
- (2012) Jean-Pierre Kruth et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component
- (2012) S Marimuthu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Temporal development of melt-pool morphology and clad geometry in laser powder deposition
- (2011) Vahid Fallah et al. COMPUTATIONAL MATERIALS SCIENCE
- Phase-field modeling of multi-component systems
- (2011) Britta Nestler et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Review on cellular automata simulations of microstructure evolution during metal forming process: Grain coarsening, recrystallization and phase transformation
- (2011) He Yang et al. Science China-Technological Sciences
- Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing
- (2010) R.R. Dehoff et al. ACTA MATERIALIA
- Numerical simulation of powder flow field on coaxial powder nozzle in laser metal direct manufacturing
- (2010) Anfeng Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fibre embedding in aluminium alloy 3003 using ultrasonic consolidation process—thermo-mechanical analyses
- (2010) Amir Siddiq et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Select laser melting of W–Ni–Fe powders: simulation and experimental study
- (2010) D. Q. Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mesoscopic simulation of selective beam melting processes
- (2010) Carolin Körner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bonding characteristics during very high power ultrasonic additive manufacturing of copper
- (2010) M.R. Sriraman et al. SCRIPTA MATERIALIA
- Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation
- (2010) Alexander M. Korsunsky et al. SURFACE & COATINGS TECHNOLOGY
- Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
- (2009) F. Roters et al. ACTA MATERIALIA
- Effect of three-dimensional melt pool convection on process characteristics during laser cladding
- (2009) Amitesh Kumar et al. COMPUTATIONAL MATERIALS SCIENCE
- Hole-Drilling Residual Stress Measurements at 75: Origins, Advances, Opportunities
- (2009) G. S. Schajer EXPERIMENTAL MECHANICS
- Advances in Hole-Drilling Residual Stress Measurements
- (2009) G. S. Schajer EXPERIMENTAL MECHANICS
- Modeling of coaxial powder flow for the laser direct deposition process
- (2009) S.Y. Wen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting
- (2009) A. V. Gusarov et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures
- (2009) Srikanth Bontha et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase-field models in materials science
- (2009) Ingo Steinbach MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Two-dimensional numerical modelling of radiation transfer in powder beds at selective laser melting
- (2008) A.V. Gusarov et al. APPLIED SURFACE SCIENCE
- Microstructural modeling of dynamic recrystallization using irregular cellular automata
- (2008) N. Yazdipour et al. COMPUTATIONAL MATERIALS SCIENCE
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started