标题
Microstructure modelling for metallic additive manufacturing: a review
作者
关键词
-
出版物
Virtual and Physical Prototyping
Volume 15, Issue 1, Pages 87-105
出版商
Informa UK Limited
发表日期
2019-10-24
DOI
10.1080/17452759.2019.1677345
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Systematic Phase-Field Study on Microstructure Formation During Brazing of Mar-M247 with a Si-Based AMS4782 Filler
- (2019) B. Böttger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling
- (2019) Chamara Kumara et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
- (2019) O.O. Salman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
- (2019) J.A. Koepf et al. COMPUTATIONAL MATERIALS SCIENCE
- Thermal effect on the microstructure of the lattice structure Cu-10Sn alloy fabricated through selective laser melting
- (2019) Zhen Tan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Large-scale phase-field simulation of three-dimensional isotropic grain growth in polycrystalline thin films
- (2019) Eisuke Miyoshi et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- An integrated modeling of process-structure-property relationship in laser additive manufacturing of duplex titanium alloy
- (2019) P. Ge et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Recent progress in the simulation of microstructure evolution in titanium alloys
- (2019) Jinhu Zhang et al. Progress in Natural Science-Materials International
- Development of a high strength Al–Zn–Si–Mg–Cu alloy for selective laser melting
- (2019) R. Casati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting
- (2019) Sohei Uchida et al. MATERIALS & DESIGN
- 3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
- (2018) Johannes A. Koepf et al. ACTA MATERIALIA
- Three-dimensional modeling of the microstructure evolution during metal additive manufacturing
- (2018) O. Zinovieva et al. COMPUTATIONAL MATERIALS SCIENCE
- Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing
- (2018) Wentao Yan et al. COMPUTATIONAL MECHANICS
- Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells
- (2018) Decheng Kong et al. ELECTROCHIMICA ACTA
- Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
- (2018) P. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
- (2018) Xiaojia Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal behavior and grain growth orientation during selective laser melting of Ti-6Al-4V alloy
- (2018) Jie Yin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting
- (2018) Yuka Kajima et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing optimisation, mechanical properties and microstructural evolution during selective laser melting of Cu-15Sn high-tin bronze
- (2018) Zhongfa Mao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting
- (2018) Young-Kyun Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
- (2018) Tomasz Kurzynowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
- (2018) Pei Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
- (2018) Zhongji Sun et al. NPG Asia Materials
- Predictive modeling of solidification during laser additive manufacturing of nickel superalloys: recent developments, future directions
- (2018) Supriyo Ghosh Materials Research Express
- Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
- (2018) Shiwen Liu et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments
- (2018) Jing Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective Laser Melting of Cu 10Zn alloy powder using high laser power
- (2018) Shasha Zhang et al. POWDER TECHNOLOGY
- Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition
- (2017) Peng Guo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Phase-Field Simulation of Microsegregation and Dendritic Growth During Solidification of Hypoeutectic Al-Cu alloys
- (2017) Alexandre Furtado Ferreira et al. Materials Research-Ibero-american Journal of Materials
- Modeling of Ti-W Solidification Microstructures Under Additive Manufacturing Conditions
- (2017) Matthew R. Rolchigo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Hot cracking investigation during laser welding of high-strength steels with multi-scale modelling approach
- (2017) H. Gao et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Two-dimensional simulation of grain structure growth within selective laser melted AA-2024
- (2017) Omar Lopez-Botello et al. MATERIALS & DESIGN
- Determination and controlling of grain structure of metals after laser incidence: Theoretical approach
- (2017) Amir Reza Ansari Dezfoli et al. Scientific Reports
- Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes
- (2016) Shijia Chen et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
- (2016) Narendran Raghavan et al. ACTA MATERIALIA
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
- (2016) Abha Rai et al. COMPUTATIONAL MATERIALS SCIENCE
- Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support
- (2016) Jacob Smith et al. COMPUTATIONAL MECHANICS
- Predicting Mesoscale Microstructural Evolution in Electron Beam Welding
- (2016) T. M. Rodgers et al. JOM
- Simulation of microstructure evolution during hybrid deposition and micro-rolling process
- (2016) Xiangman Zhou et al. JOURNAL OF MATERIALS SCIENCE
- The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping
- (2016) Michał Ziętala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
- (2016) A. Zinoviev et al. MATERIALS & DESIGN
- Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
- (2016) Ali Foroozmehr et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting
- (2015) Xipeng Tan et al. ACTA MATERIALIA
- Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
- (2015) Loong-Ee Loh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing
- (2015) Xibing Gong et al. JOM
- Advances in the modeling of laser direct metal deposition
- (2015) Andrew J. Pinkerton JOURNAL OF LASER APPLICATIONS
- A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development
- (2015) Nachiket Patil et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments
- (2015) Pengpeng Yuan et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
- (2014) Pulin Nie et al. ACTA MATERIALIA
- In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
- (2014) S. Clijsters et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A Modified Cellular Automaton Model for the Quantitative Prediction of Equiaxed and Columnar Dendritic Growth
- (2014) Rui Chen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructural and texture development in direct laser fabricated IN718
- (2014) Lakshmi L. Parimi et al. MATERIALS CHARACTERIZATION
- Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS
- (2014) K. Zeng et al. MATERIALS SCIENCE AND TECHNOLOGY
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
- (2014) Erik R Denlinger et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Monte Carlo simulation of polycrystalline microstructures and finite element stress analysis
- (2013) Yunfang Liu et al. MATERIALS & DESIGN
- Fundamental consolidation mechanisms during selective beam melting of powders
- (2013) Carolin Körner et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Microstructure analysis of AZ31 magnesium alloy welds using phase-field models
- (2012) D. Montiel et al. ACTA MATERIALIA
- Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys
- (2012) V. Fallah et al. ACTA MATERIALIA
- Modeling dendritic solidification of Al–3%Cu using cellular automaton and phase-field methods
- (2012) Mohsen Asle Zaeem et al. APPLIED MATHEMATICAL MODELLING
- Economics of additive manufacturing for end-usable metal parts
- (2012) Eleonora Atzeni et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Temporal development of melt-pool morphology and clad geometry in laser powder deposition
- (2011) Vahid Fallah et al. COMPUTATIONAL MATERIALS SCIENCE
- Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel
- (2010) J.Z. Lu et al. ACTA MATERIALIA
- Dendrite growth simulation during solidification in the LENS process
- (2009) H. Yin et al. ACTA MATERIALIA
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- Phase-field models in materials science
- (2009) Ingo Steinbach MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Phase-field simulation of weld solidification microstructure in an Al–Cu alloy
- (2008) A Farzadi et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- The phase field technique for modeling multiphase materials
- (2008) I Singer-Loginova et al. REPORTS ON PROGRESS IN PHYSICS
- Dendritic grain growth simulation in weld molten pool based on CA-FD model
- (2007) X. H. Zhan et al. CRYSTAL RESEARCH AND TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now