标题
Antibacterial metals and alloys for potential biomedical implants
作者
关键词
Antibacterial metals and alloys, Antibacterial alloying elements, Antibacterial stainless steel, Antibacterial titanium alloy, Antibacterial magnesium alloy
出版物
Bioactive Materials
Volume 6, Issue 8, Pages 2569-2612
出版商
Elsevier BV
发表日期
2021-02-08
DOI
10.1016/j.bioactmat.2021.01.030
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- A novel biomedical titanium alloy with high antibacterial property and low elastic modulus
- (2021) Diangeng Cai et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications
- (2020) Jixing Lin et al. Acta Biomaterialia
- The Microstructure, Antimicrobial Properties, and Corrosion Resistance of Cu‐Bearing Strip Cast Steel
- (2020) Bin Guan et al. ADVANCED ENGINEERING MATERIALS
- Antimicrobial Bioresorbable Mg–Zn–Ca Alloy for Bone Repair in a Comparison Study with Mg–Zn–Sr Alloy and Pure Mg
- (2020) Chaoxing Zhang et al. ACS Biomaterials-Science & Engineering
- Biocompatibility, osseointegration, antibacterial and mechanical properties of nanocrystalline Ti-Cu alloy as a new orthopedic material
- (2020) S. Moniri Javadhesari et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Novel CoCrWNi alloys with Cu addition: Microstructure, mechanical properties, corrosion properties and biocompatibility
- (2020) Ruoxian Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of ultrasonic micro-arc oxidation on the antibacterial properties and cell biocompatibility of Ti-Cu alloy for biomedical application
- (2020) Jiali Hu et al. Materials Science & Engineering C-Materials for Biological Applications
- Effects of combined chemical design (Cu addition) and topographical modification (SLA) of Ti-Cu/SLA for promoting osteogenic, angiogenic and antibacterial activities
- (2020) Rui Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Rough surface of copper-bearing titanium alloy with multifunctions of osteogenic ability and antibacterial activity
- (2020) Hui Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications
- (2020) Rui Yue et al. Materials Science & Engineering C-Materials for Biological Applications
- Rapid and highly effective bacteria-killing by polydopamine/IR780@MnO2–Ti using near-infrared light
- (2020) Xingfu Teng et al. Progress in Natural Science-Materials International
- In vitro and in vivo degradation behavior of Mg–2Sr–Ca and Mg–2Sr–Zn alloys
- (2020) Kai Chen et al. Bioactive Materials
- Rapid bacteria trapping and killing of metal-organic frameworks strengthened photo-responsive hydrogel for rapid tissue repair of bacterial infected wounds
- (2020) Donglin Han et al. CHEMICAL ENGINEERING JOURNAL
- Effect of Cu on Martensite Transformation of CoCrMo alloy for biomedical application
- (2020) Ruoxian Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A potential strategy for in-stent restenosis: Inhibition of migration and proliferation of vascular smooth muscle cells by Cu ion
- (2020) Yuan Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Synergistic antibacterial activity of physical-chemical multi-mechanism by TiO2 nanorod arrays for safe biofilm eradication on implant
- (2020) Xiangyu Zhang et al. Bioactive Materials
- Structural and mechanical aspects of hypoeutectic Zn–Mg binary alloys for biodegradable vascular stent applications
- (2020) W. Pachla et al. Bioactive Materials
- Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
- (2020) Humayun Kabir et al. Bioactive Materials
- Biological applications of copper-containing materials
- (2020) Peng Wang et al. Bioactive Materials
- Appropriately adapted properties of hot-extruded Zn–0.5Cu–xFe alloys aimed for biodegradable guided bone regeneration membrane application
- (2020) Wentai Zhang et al. Bioactive Materials
- Study on properties of copper-containing austenitic antibacterial stainless steel
- (2019) Feifei Luo et al. MATERIALS TECHNOLOGY
- In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications
- (2019) Mahmood Razzaghi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Antibacterial activity of copper‐bearing 316L stainless steel for the prevention of implant‐related infection
- (2019) Yifu Zhuang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Optimization of annealing treatment and comprehensive properties of Cu-containing Ti6Al4V-xCu alloys
- (2019) Cong Peng et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Role of Cu element in biomedical metal alloy design
- (2019) Er-Lin Zhang et al. RARE METALS
- Low-cost powder metallurgy Ti-Cu alloys as a potential antibacterial material
- (2019) Y. Alshammari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy
- (2019) Zhang-Zhi Shi et al. Materials Science & Engineering C-Materials for Biological Applications
- In vivo antibacterial property of Ti-Cu sintered alloy implant
- (2019) Xiaoyan Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Synthesis and in-vitro characterization of biodegradable porous magnesium-based scaffolds containing silver for bone tissue engineering
- (2019) Hamid Reza BAKHSHESHI-RAD et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Dose-response relationships between copper and its biocompatibility/antibacterial activities
- (2019) Kunqiang Li et al. JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY
- Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant
- (2019) Jiewen Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Characterization of a new Ti-13Nb-13Zr-10Cu alloy with enhanced antibacterial activity for biomedical applications
- (2019) Zunyu Ke et al. MATERIALS LETTERS
- Improving in vitro and in vivo antibacterial functionality of Mg alloys through micro-alloying with Sr and Ga
- (2019) Zhihan Gao et al. Materials Science & Engineering C-Materials for Biological Applications
- On the microstructure and mechanical properties of silver-bearing antibacterial CD4MCu duplex stainless steels: Solid solution temperature
- (2019) Hongliang Xiang et al. Materials Express
- Contact Killing of Cu-Bearing Stainless Steel Based on Charge Transfer Caused by the Microdomain Potential Difference
- (2019) Xinrui Zhang et al. ACS Applied Materials & Interfaces
- An UV to NIR-driven platform based on red phosphorus/graphene oxide film for rapid microbial inactivation
- (2019) Qi Zhang et al. CHEMICAL ENGINEERING JOURNAL
- Microstructure, mechanical properties and antibacterial properties of the microwave sintered porous Ti–3Cu alloys
- (2019) S.C. Tao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Ti2Cu precipitation on antibacterial property of Ti-5Cu alloy
- (2019) Ju-Hui Wu et al. Materials Science & Engineering C-Materials for Biological Applications
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- A strong, wear- and corrosion-resistant, and antibacterial Co–30 at.% Cr–5 at.% Ag ternary alloy for medical implants
- (2019) Feilong Jiang et al. MATERIALS & DESIGN
- What controls the antibacterial activity of Ti-Ag alloy, Ag ion or Ti2Ag particles?
- (2019) Anqi Shi et al. Materials Science & Engineering C-Materials for Biological Applications
- A graphene oxide-Ag co-dispersing nanosystem: Dual synergistic effects on antibacterial activities and mechanical properties of polymer scaffolds
- (2018) Cijun Shuai et al. CHEMICAL ENGINEERING JOURNAL
- Loading Cu-doped magnesium oxide onto surface of magnetic nanoparticles to prepare magnetic disinfectant with enhanced antibacterial activity
- (2018) Xiaole Zhang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Corrosion of antibacterial Cu-bearing 316L stainless steels in the presence of sulfate reducing bacteria
- (2018) Hongwei Liu et al. CORROSION SCIENCE
- In vitro and in vivo studies of anti-bacterial copper-bearing titanium alloy for dental application
- (2018) Rui Liu et al. DENTAL MATERIALS
- Antimicrobial Cu-bearing 2205 duplex stainless steel against MIC by nitrate reducing Pseudomonas aeruginosa biofilm
- (2018) Jialin Liu et al. INTERNATIONAL BIODETERIORATION & BIODEGRADATION
- In situ antimicrobial behavior of materials with copper-based additives in a hospital environment
- (2018) Humberto Palza et al. INTERNATIONAL JOURNAL OF ANTIMICROBIAL AGENTS
- Characterization and interplay of bacteriocin and exopolysaccharide-mediated silver nanoparticles as an antibacterial agent
- (2018) Asma Ansari et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Facile preparation of antibacterial chitosan/graphene oxide-Ag bio-nanocomposite hydrogel beads for controlled release of doxorubicin
- (2018) Monireh Rasoulzadehzali et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Study of the effect of ZnO nanoparticles addition to PEO coatings on pure titanium substrate: Microstructural analysis, antibacterial effect and corrosion behavior of coatings in Ringer's physiological solution
- (2018) Masoud Roknian et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies
- (2018) Chi Xiao et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Cu on microstructure, mechanical properties, corrosion resistance and cytotoxicity of CoCrW alloy fabricated by selective laser melting
- (2018) Yanjin Lu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Synthesis of monophasic Ag doped hydroxyapatite and evaluation of antibacterial activity
- (2018) Madeeha Riaz et al. Materials Science & Engineering C-Materials for Biological Applications
- Effects of copper nanoparticles in porous TiO 2 coatings on bacterial resistance and cytocompatibility of osteoblasts and endothelial cells
- (2018) Xiangyu Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Antibacterial activities and biocompatibilities of Ti-Ag alloys prepared by spark plasma sintering and acid etching
- (2018) Zeming Lei et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of copper content on the corrosion behaviors and antibacterial properties of binary Mg–Cu alloys
- (2018) Junxiu Chen et al. MATERIALS TECHNOLOGY
- CoCrWCu alloy with antibacterial activity fabricated by selective laser melting: Densification, mechanical properties and microstructural analysis
- (2018) Yanjin Lu et al. POWDER TECHNOLOGY
- Recent updates of marine antimicrobial peptides
- (2018) Mohammad H. Semreen et al. SAUDI PHARMACEUTICAL JOURNAL
- Mesoporous bioactive glasses (MBGs): promising platforms for antibacterial strategies
- (2018) Saeid Kargozar et al. Acta Biomaterialia
- Fabrication and properties of porous Zn-Ag alloy scaffolds as biodegradable materials
- (2018) Yu Xie et al. MATERIALS CHEMISTRY AND PHYSICS
- Surface modification of stainless steel for biomedical applications: Revisiting a century-old material
- (2018) Aliya Bekmurzayeva et al. Materials Science & Engineering C-Materials for Biological Applications
- Corrosion and biological performance of biodegradable magnesium alloys mediated by low copper addition and processing
- (2018) Xudong Yan et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of annealing temperature on mechanical and antibacterial properties of Cu-bearing titanium alloy and its preliminary study of antibacterial mechanism
- (2018) Cong Peng et al. Materials Science & Engineering C-Materials for Biological Applications
- Optimized antibacterial treatment for the Cu-bearing 420 stainless steel
- (2018) Yalan Huang et al. MATERIALS TECHNOLOGY
- Fabrication, characterization and in vitro properties of silver-incorporated TiO2 coatings on titanium by thermal evaporation and micro-arc oxidation
- (2018) Salih Durdu et al. SURFACE & COATINGS TECHNOLOGY
- Cu-bearing stainless steel reduces cytotoxicity and crystals adhesion after ureteral epithelial cells exposing to calcium oxalate monohydrate
- (2018) Zhiqiang Cao et al. Scientific Reports
- Anti-bacterium influenced corrosion effect of antibacterial Ti-3Cu alloy in Staphylococcus aureus suspension for biomedical application
- (2018) Ziming Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test
- (2018) Lee Fowler et al. Materials Science & Engineering C-Materials for Biological Applications
- Nano-copper-bearing stainless steel promotes fracture healing by accelerating the callus evolution process
- (2017) Lei Wang et al. International Journal of Nanomedicine
- Wear performance of novel nanostructured Ti-Cu intermetallic alloy as a potential material for biomedical applications
- (2017) M.R. Akbarpour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Innovative Zr-Cu-Ag thin film metallic glass deposed by magnetron PVD sputtering for antibacterial applications
- (2017) A. Etiemble et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A promising of alloying modified beta-type Titanium-Niobium implant for biomedical applications: Microstructural characteristics, in vitro biocompatibility and antibacterial performance
- (2017) Keng-Liang Ou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Review on the improvement of the photocatalytic and antibacterial activities of ZnO
- (2017) Kezhen Qi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Magnesium alloy AZ91 exhibits antimicrobial properties in vitro but not in vivo
- (2017) Emily K. Brooks et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Anti-fibrotic function of Cu-bearing stainless steel for reducing recurrence of urethral stricture after stent implantation
- (2017) Jing Zhao et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- In vitro study on infectious ureteral encrustation resistance of Cu-bearing stainless steel
- (2017) Jing Zhao et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
- (2017) Zibo Tang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Antibacterial Activity of AI-Hemocidin 2, a Novel N-Terminal Peptide of Hemoglobin Purified from Arca inflata
- (2017) Chunlei Li et al. Marine Drugs
- Microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys
- (2017) Chaoyong Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of Cu, Au and Ag on structural and surface properties of bioactive coatings based on titanium
- (2017) D. Wojcieszak et al. Materials Science & Engineering C-Materials for Biological Applications
- Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V- x Cu alloys
- (2017) Sai Guo et al. Materials Science & Engineering C-Materials for Biological Applications
- Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn Ag alloys for degradable implant applications
- (2017) M. Sikora-Jasinska et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel
- (2017) Tong Xi et al. Materials Science & Engineering C-Materials for Biological Applications
- Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities
- (2017) H.R. Bakhsheshi-Rad et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of nano/micro-Ag compound particles on the bio-corrosion, antibacterial properties and cell biocompatibility of Ti-Ag alloys
- (2017) Mian Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- Antimicrobial property, cytocompatibility and corrosion resistance of Zn-doped ZrO 2 /TiO 2 coatings on Ti6Al4V implants
- (2017) Ruoyun Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys
- (2017) Shineng Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of the Microstructure and Silver Content on Degradation, Cytocompatibility, and Antibacterial Properties of Magnesium-Silver Alloys In Vitro
- (2017) Zhidan Liu et al. Oxidative Medicine and Cellular Longevity
- Electrophoretic-deposited hydroxyapatite-copper nanocomposite as an antibacterial coating for biomedical applications
- (2017) Mohammad Hadidi et al. SURFACE & COATINGS TECHNOLOGY
- Antibacterial Properties and Corrosion Resistance of the Newly Developed Biomaterial, Ti–12Nb–1Ag Alloy
- (2017) Je-Kang Du et al. Metals
- The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper
- (2017) Galit Katarivas Levy et al. Metals
- Cu-bearing, martensitic stainless steels for applications in biological environments
- (2017) M. Bahmani-Oskooee et al. MATERIALS & DESIGN
- Understanding the antimicrobial activity behind thin- and thick-rolled copper plates
- (2016) Basit Yousuf et al. APPLIED MICROBIOLOGY AND BIOTECHNOLOGY
- Controlling the antibacterial activity of CuSn thin films by varying the contents of Sn
- (2016) Yujin Kang et al. APPLIED SURFACE SCIENCE
- Promotive Effect of Zinc Ions on the Vitality, Migration, and Osteogenic Differentiation of Human Dental Pulp Cells
- (2016) Shaofeng An et al. BIOLOGICAL TRACE ELEMENT RESEARCH
- The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii
- (2016) A. Cochis et al. BIOMATERIALS
- Biodegradable Mg-Cu alloy implants with antibacterial activity for the treatment of osteomyelitis: In vitro and in vivo evaluations
- (2016) Yang Li et al. BIOMATERIALS
- Corrosion behavior of Zn-incorporated antibacterial TiO 2 porous coating on titanium
- (2016) Xiangyu Zhang et al. CERAMICS INTERNATIONAL
- Cytocompatibility and antibacterial activity of titania nanotubes incorporated with gold nanoparticles
- (2016) Tingting Yang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys
- (2016) V. Guiñón Pina et al. CORROSION SCIENCE
- Correlation of ageing precipitates with the corrosion behaviour of Cu-4 wt.% Ti alloys in 3.5 wt.% NaCl solution
- (2016) Huan Wei et al. CORROSION SCIENCE
- Effects of aging time on intergranular and pitting corrosion behavior of Cu-bearing 304L stainless steel in comparison with 304L stainless steel
- (2016) Jie Jiang et al. CORROSION SCIENCE
- Mechanical properties and microstructures of dental cast Ti-6Nb-4Cu, Ti-18Nb-2Cu, and Ti-24Nb-1Cu alloys
- (2016) Masatoshi TAKAHASHI et al. DENTAL MATERIALS JOURNAL
- Antimicrobial dental implant functionalization strategies —A systematic review
- (2016) Jasmin GRISCHKE et al. DENTAL MATERIALS JOURNAL
- The anti-bacterial activity of titanium-copper sintered alloy against Porphyromonas gingivalis in vitro
- (2016) Bing BAI et al. DENTAL MATERIALS JOURNAL
- Antibacterial ability of a novel Cu-bearing 2205 duplex stainless steel against Pseudomonas aeruginosa biofilm in artificial seawater
- (2016) Yuntian Lou et al. INTERNATIONAL BIODETERIORATION & BIODEGRADATION
- Antibacterial abilities and biocompatibilities of Ti-Ag alloys with nanotubular coatings
- (2016) Xingwang Liu et al. International Journal of Nanomedicine
- Susceptibility of metallic magnesium implants to bacterial biofilm infections
- (2016) Muhammad Imran Rahim et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Investigation of the inner corrosion layer formed in pulse electrodeposition coating on Mg-Sr alloy and corresponding degradation behavior
- (2016) Yongming Shangguan et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Where does the toxicity of metal oxide nanoparticles come from: The nanoparticles, the ions, or a combination of both?
- (2016) Dali Wang et al. JOURNAL OF HAZARDOUS MATERIALS
- The synergistic antibacterial activity and mechanism of multicomponent metal ions-containing aqueous solutions against Staphylococcus aureus
- (2016) Xiaolan Wang et al. JOURNAL OF INORGANIC BIOCHEMISTRY
- Zn and Ag Co-doped Anti-microbial TiO2 Coatings on Ti by Micro-arc Oxidation
- (2016) Lan Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Bio-Functional Cu Containing Biomaterials: a New Way to Enhance Bio-Adaption of Biomaterials
- (2016) Shujing Jin et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- In vitro study on an antibacterial Ti–5Cu alloy for medical application
- (2016) Zheng Ma et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation
- (2016) E. Mostaed et al. Journal of the Mechanical Behavior of Biomedical Materials
- Characterization, mechanical properties and corrosion resistance of biocompatible Zn-HA/TiO 2 nanocomposite coatings
- (2016) Mohammad Mirak et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of silver on microstructure and antibacterial property of 2205 duplex stainless steel
- (2016) Sheng-Min Yang et al. Materials Science & Engineering C-Materials for Biological Applications
- Inhibition of Staphylococcus aureus biofilm by a copper-bearing 317L-Cu stainless steel and its corrosion resistance
- (2016) Da Sun et al. Materials Science & Engineering C-Materials for Biological Applications
- A novel ureteral stent material with antibacterial and reducing encrustation properties
- (2016) Jing Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Preliminary assessment of metal-porcelain bonding strength of CoCrW alloy after 3wt.% Cu addition
- (2016) Yanjin Lu et al. Materials Science & Engineering C-Materials for Biological Applications
- A novel coping metal material CoCrCu alloy fabricated by selective laser melting with antimicrobial and antibiofilm properties
- (2016) Ling Ren et al. Materials Science & Engineering C-Materials for Biological Applications
- Comparison study of different coatings on degradation performance and cell response of Mg-Sr alloy
- (2016) Yongming Shangguan et al. Materials Science & Engineering C-Materials for Biological Applications
- Antimicrobial Cu-bearing stainless steel scaffolds
- (2016) Qiang Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Future prospects of antibacterial metal nanoparticles as enzyme inhibitor
- (2016) Khan Behlol Ayaz Ahmed et al. Materials Science & Engineering C-Materials for Biological Applications
- A new antibacterial Co-Cr-Mo-Cu alloy: Preparation, biocorrosion, mechanical and antibacterial property
- (2016) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys
- (2016) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of the existing form of Cu element on the mechanical properties, bio-corrosion and antibacterial properties of Ti-Cu alloys for biomedical application
- (2016) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti–Ag sintered alloys
- (2016) Mian Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- Antibacterial titanium surfaces for medical implants
- (2016) S. Ferraris et al. Materials Science & Engineering C-Materials for Biological Applications
- Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
- (2016) Jialin Niu et al. Materials Science & Engineering C-Materials for Biological Applications
- Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys
- (2016) J. Kubásek et al. Materials Science & Engineering C-Materials for Biological Applications
- Copper-polymer nanocomposites: An excellent and cost-effective biocide for use on antibacterial surfaces
- (2016) Laura Tamayo et al. Materials Science & Engineering C-Materials for Biological Applications
- Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study
- (2016) Tong Xi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optically transparent silver-loaded mesoporous thin film coating with long-lasting antibacterial activity
- (2016) Paolo Nicolas Catalano et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Nano-galvanic coupling for enhanced Ag+ release in ZrCN-Ag films: Antibacterial application
- (2016) S. Calderon V et al. SURFACE & COATINGS TECHNOLOGY
- Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
- (2016) Xiwei Liu et al. MATERIALS & DESIGN
- Antimicrobial and Osteogenic Properties of Silver-Ion-Implanted Stainless Steel
- (2015) Hui Qin et al. ACS Applied Materials & Interfaces
- Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials
- (2015) Jiali Wang et al. Acta Biomaterialia
- Laboratory investigation of the microbiologically influenced corrosion (MIC) resistance of a novel Cu-bearing 2205 duplex stainless steel in the presence of an aerobic marinePseudomonas aeruginosabiofilm
- (2015) Jin Xia et al. BIOFOULING
- Metal-Based Antibacterial Substrates for Biomedical Applications
- (2015) Federica Paladini et al. BIOMACROMOLECULES
- Cold atmospheric plasma in combination with mechanical treatment improves osteoblast growth on biofilm covered titanium discs
- (2015) Kathrin Duske et al. BIOMATERIALS
- A dual function of copper in designing regenerative implants
- (2015) Ines Burghardt et al. BIOMATERIALS
- Enhanced antibacterial properties, biocompatibility, and corrosion resistance of degradable Mg-Nd-Zn-Zr alloy
- (2015) Hui Qin et al. BIOMATERIALS
- Concentration Ranges of Antibacterial Cations for Showing the Highest Antibacterial Efficacy but the Least Cytotoxicity against Mammalian Cells: Implications for a New Antibacterial Mechanism
- (2015) Chengyun Ning et al. CHEMICAL RESEARCH IN TOXICOLOGY
- Review of cobalt toxicokinetics following oral dosing: Implications for health risk assessments and metal-on-metal hip implant patients
- (2015) Brooke E. Tvermoes et al. CRITICAL REVIEWS IN TOXICOLOGY
- Biocompatibility evaluation of sputtered zirconium-based thin film metallic glass-coated steels
- (2015) Balasubramanian Subramanian et al. International Journal of Nanomedicine
- ReducingStaphylococcus aureusgrowth on Ti alloy nanostructured surfaces through the addition of Sn
- (2015) Nathália C. Verissimo et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Alkalization is responsible for antibacterial effects of corroding magnesium
- (2015) Muhammad Imran Rahim et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy
- (2015) Haibo Gong et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Synthesis of Ag ion-implanted TiO2 thin films for antibacterial application and photocatalytic performance
- (2015) Xinggang Hou et al. JOURNAL OF HAZARDOUS MATERIALS
- Stability and toxicity of ZnO quantum dots: Interplay between nanoparticles and bacteria
- (2015) Xavier Bellanger et al. JOURNAL OF HAZARDOUS MATERIALS
- Antibacterial Performance of a Cu-bearing Stainless Steel against Microorganisms in Tap Water
- (2015) Mingjun Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Heat Treatment on Cu Distribution, Antibacterial Performance and Cytotoxicity of Ti–6Al–4V–5Cu Alloy
- (2015) Zheng Ma et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Cu-bearing steel reduce inflammation after stent implantation
- (2015) Jinzhao Li et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Biocompatibility of antibacterial Ti–Cu sintered alloy: in vivo bone response
- (2015) Bing Bai et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- In vitro and in vivo biocompatibility of an Ag-bearing Zr-based bulk metallic glass for potential medical use
- (2015) Yu Sun et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Degradable porous Fe-35wt.%Mn produced via powder sintering from NH 4 HCO 3 porogen
- (2015) Qian Zhang et al. MATERIALS CHEMISTRY AND PHYSICS
- Antibacterial ability of Ag–TiO2 nanotubes prepared by ion implantation and anodic oxidation
- (2015) Xinggang Hou et al. MATERIALS LETTERS
- Study on improved tribological properties by alloying copper to CP-Ti and Ti–6Al–4V alloy
- (2015) Song Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys
- (2015) Zhen Zhen et al. Materials Science & Engineering C-Materials for Biological Applications
- Thermal exposure effects on the in vitro degradation and mechanical properties of Mg–Sr and Mg–Ca–Sr biodegradable implant alloys and the role of the microstructure
- (2015) M. Bornapour et al. Materials Science & Engineering C-Materials for Biological Applications
- Microbiological influenced corrosion resistance characteristics of a 304L-Cu stainless steel against Escherichia coli
- (2015) Li Nan et al. Materials Science & Engineering C-Materials for Biological Applications
- Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents
- (2015) Patrick K. Bowen et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of Cu content on the cell biocompatibility of Ti–Cu sintered alloys
- (2015) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of Cu addition on antibacterial property of type 200 stainless steel
- (2015) L. Nan et al. MATERIALS TECHNOLOGY
- Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
- (2015) H. F. Li et al. Scientific Reports
- Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys againstStaphylococcus aureus
- (2015) Mei Li et al. Advanced Healthcare Materials
- Addition of Zn to the ternary Mg–Ca–Sr alloys significantly improves their antibacterial properties
- (2015) Guanping He et al. Journal of Materials Chemistry B
- Endothelial Cellular Responses to Biodegradable Metal Zinc
- (2015) Jun Ma et al. ACS Biomaterials-Science & Engineering
- Endothelial Cellular Responses to Biodegradable Metal Zinc
- (2015) Jun Ma et al. ACS Biomaterials Science & Engineering
- Antibacterial Properties of MagnesiumIn Vitroand in anIn VivoModel of Implant-Associated Methicillin-Resistant Staphylococcus aureus Infection
- (2014) Yang Li et al. ANTIMICROBIAL AGENTS AND CHEMOTHERAPY
- Plasmonic gold nanoparticles modified titania nanotubes for antibacterial application
- (2014) Jinhua Li et al. APPLIED PHYSICS LETTERS
- Mesoporous TiO2 implants for loading high dosage of antibacterial agent
- (2014) Se Woong Park et al. APPLIED SURFACE SCIENCE
- In vitro and in vivo anti-biofilm effects of silver nanoparticles immobilized on titanium
- (2014) Hui Qin et al. BIOMATERIALS
- Stimulation of bone growth following zinc incorporation into biomaterials
- (2014) Yuqin Qiao et al. BIOMATERIALS
- The antibacterial properties and biocompatibility of a Ti–Cu sintered alloy for biomedical application
- (2014) Jie Liu et al. Biomedical Materials
- Osteogenic activity and antibacterial effect of zinc ion implanted titanium
- (2014) Guodong Jin et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Inhibitory effect of Ti-Ag alloy on artificial biofilm formation
- (2014) Kazuko NAKAJO et al. DENTAL MATERIALS JOURNAL
- Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy
- (2014) Caizhen Yao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Osteogenic ability of Cu-bearing stainless steel
- (2014) Ling Ren et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Tetracycline tethered to titanium inhibits colonization by Gram-negative bacteria
- (2014) Helen Davidson et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Layer-by-layer self-assembly of minocycline-loaded chitosan/alginate multilayer on titanium substrates to inhibit biofilm formation
- (2014) Hongbin Lv et al. JOURNAL OF DENTISTRY
- Antibacterial Properties of Ti–6Al–4V–xCu Alloys
- (2014) Ling Ren et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Antibiotic-decorated titanium with enhanced antibacterial activity through adhesive polydopamine for dental/bone implant
- (2014) S. He et al. Journal of the Royal Society Interface
- Influence of Aqueous Media on the ROS-Mediated Toxicity of ZnO Nanoparticles toward Green Fluorescent Protein-Expressing Escherichia coli under UV-365 Irradiation
- (2014) Yang Li et al. LANGMUIR
- Study on antibacterial performance of Cu-bearing cobalt-based alloy
- (2014) Shuai Wang et al. MATERIALS LETTERS
- Antimicrobial behavior of Cu-bearing Zr-based bulk metallic glasses
- (2014) Lu Huang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of aging on antibacterial performance of Cu-bearing martensitic stainless steel
- (2014) S. Wang et al. MATERIALS TECHNOLOGY
- Study on antibacterial activity and cytocompatibility of Ti–6Al–4V–5Cu alloy
- (2014) Z. Ma et al. MATERIALS TECHNOLOGY
- Electrochemical Corrosion Behavior of TiN-Coated Biomedical Ti-Cu Alloy Foam in Fluoride Containing Artificial Saliva
- (2014) Ilven Mutlu METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Metabolism and functions of copper in brain
- (2014) Ivo F. Scheiber et al. PROGRESS IN NEUROBIOLOGY
- Toxicity of Metal Oxide Nanoparticles: Mechanisms, Characterization, and Avoiding Experimental Artefacts
- (2014) Aleksandra B. Djurišić et al. Small
- Antimicrobial characteristics in Cu-containing Zr-based thin film metallic glass
- (2014) Jia-Hong Chu et al. SURFACE & COATINGS TECHNOLOGY
- In situ growth of self-organized Cu-containing nano-tubes and nano-pores on Ti90−xCu10Alx (x=0, 45) alloys by one-pot anodization and evaluation of their antimicrobial activity and cytotoxicity
- (2014) Xiaoguang Wang et al. SURFACE & COATINGS TECHNOLOGY
- Antibacterial activity of large-area monolayer graphene film manipulated by charge transfer
- (2014) Jinhua Li et al. Scientific Reports
- Microstructure and antibacterial properties of Cu-doped TiO2 coating on titanium by micro-arc oxidation
- (2013) Xiaohong Yao et al. APPLIED SURFACE SCIENCE
- A review of the biomaterials technologies for infection-resistant surfaces
- (2013) Davide Campoccia et al. BIOMATERIALS
- Osteogenic activity and antibacterial effects on titanium surfaces modified with Zn-incorporated nanotube arrays
- (2013) Kaifu Huo et al. BIOMATERIALS
- A review of the clinical implications of anti-infective biomaterials and infection-resistant surfaces
- (2013) Davide Campoccia et al. BIOMATERIALS
- In vitrocleaning potential of three different implant debridement methods
- (2013) Philipp Sahrmann et al. CLINICAL ORAL IMPLANTS RESEARCH
- Rotating titanium brush for plaque removal from rough titanium surfaces - anin vitrostudy
- (2013) Gordon John et al. CLINICAL ORAL IMPLANTS RESEARCH
- Antibacterial activity against Porphyromonas gingivalis and biological characteristics of antibacterial stainless steel
- (2013) Dan Zhang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Antimicrobial activity and cytocompatibility of Ag plasma-modified hierarchical TiO2 film on titanium surface
- (2013) Jinhua Li et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Anti-adhesion and antibacterial activity of silver nanoparticles supported on graphene oxide sheets
- (2013) Andreia Fonseca de Faria et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- A review of the health hazards posed by cobalt
- (2013) Dennis J. Paustenbach et al. CRITICAL REVIEWS IN TOXICOLOGY
- Improved antibacterial activity and biocompatibility on vancomycin-loaded TiO2 nanotubes: in vivo and in vitro studies
- (2013) Hangzhou Zhang et al. International Journal of Nanomedicine
- Degradation and antibacterial properties of magnesium alloys in artificial urine for potential resorbable ureteral stent applications
- (2013) Jaclyn Y. Lock et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Silver-containing mesoporous bioactive glass with improved antibacterial properties
- (2013) Nicola Gargiulo et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Effects of Ca on microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Ca alloys
- (2013) Ping Yin et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- In Vitro Hydroxyapatite-Forming Ability and Antimicrobial Properties of Mesoporous Bioactive Glasses Doped with Ti/Ag
- (2013) Huiming Lin et al. Journal of Nanomaterials
- In vitro mechanical and corrosion properties of biodegradable Mg-Ag alloys
- (2013) D. Tie et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- A new antibacterial titanium–copper sintered alloy: Preparation and antibacterial property
- (2013) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of Cu content on the antibacterial activity of titanium–copper sintered alloys
- (2013) Jie Liu et al. Materials Science & Engineering C-Materials for Biological Applications
- Antimicrobial activity of metals: mechanisms, molecular targets and applications
- (2013) Joseph A. Lemire et al. NATURE REVIEWS MICROBIOLOGY
- Microstructural, thermal and mechanical behavior of co-sputtered binary Zr–Cu thin film metallic glasses
- (2013) M. Apreutesei et al. THIN SOLID FILMS
- Fabrication and characterizations of thin film metallic glasses: Antibacterial property and durability study for medical application
- (2013) Jinn P. Chu et al. THIN SOLID FILMS
- Antimicrobial properties of Zr–Cu–Al–Ag thin film metallic glass
- (2013) Hsien-Wei Chen et al. THIN SOLID FILMS
- Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings
- (2012) Gary A. Fielding et al. Acta Biomaterialia
- In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal
- (2012) X.N. Gu et al. Acta Biomaterialia
- Cold drawn bioabsorbable ferrous and ferrous composite wires: An evaluation of in vitro vascular cytocompatibility
- (2012) Jeremy E. Schaffer et al. Acta Biomaterialia
- Biocompatibility and biodegradability of Mg–Sr alloys: The formation of Sr-substituted hydroxyapatite
- (2012) M. Bornapour et al. Acta Biomaterialia
- Electron storage mediated dark antibacterial action of bound silver nanoparticles: Smaller is not always better
- (2012) Huiliang Cao et al. Acta Biomaterialia
- Silver as Antibacterial Agent: Ion, Nanoparticle, and Metal
- (2012) Svitlana Chernousova et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Copper-containing mesoporous bioactive glass scaffolds with multifunctional properties of angiogenesis capacity, osteostimulation and antibacterial activity
- (2012) Chengtie Wu et al. BIOMATERIALS
- Glucose sensing, photocatalytic and antibacterial properties of graphene–ZnO nanoparticle hybrids
- (2012) Thangavelu Kavitha et al. CARBON
- Antibacterial effect of metallic glasses
- (2012) Bao Lin et al. CHINESE SCIENCE BULLETIN
- Inflammatory response by Ti, Co–Cr–Mo in cultures of human macrophages
- (2012) M. Pettersson et al. DENTAL MATERIALS
- Sub-toxic effects of CuO nanoparticles on bacteria: Kinetics, role of Cu ions and possible mechanisms of action
- (2012) Olesja Bondarenko et al. ENVIRONMENTAL POLLUTION
- Sharpness improvement of surgical blade by means of ZrCuAlAgSi metallic glass and metallic glass thin film coating
- (2012) P.H. Tsai et al. INTERMETALLICS
- Synthesis and characterization of Mg-Ca-Sr alloys for biodegradable orthopedic implant applications
- (2012) Ida S. Berglund et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Risk Factors for Periprosthetic Ankle Joint Infection
- (2012) Bernhard Kessler et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Chlorhexidine delivery system from titanium/polybenzyl acrylate coating: Evaluation of cytotoxicity and early bacterial adhesion
- (2012) María C. Cortizo et al. JOURNAL OF DENTISTRY
- Antibacterial Behavior of a Cu-bearing Type 200 Stainless Steel
- (2012) Li Nan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Biological Activity and Antibacterial Property of Nano-structured TiO2 Coating Incorporated with Cu Prepared by Micro-arc Oxidation
- (2012) Wei Zhu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Preparation and antibiotic drug release of mineralized collagen coatings on titanium
- (2012) Junjun Tu et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Strontium-Substituted Calcium Deficient Hydroxyapatite Nanoparticles: Synthesis, Characterization, and Antibacterial Properties
- (2012) Narmadha Devi Ravi et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Bactericidal strontium-releasing injectable bone cements based on bioactive glasses
- (2012) D. S. Brauer et al. Journal of the Royal Society Interface
- Novel Cu-bearing economical 21Cr duplex stainless steels
- (2012) Qingxuan Ran et al. MATERIALS & DESIGN
- Antibacterial effect of sand blasted, large-grit, acid-etched treated Ti–Ag alloys
- (2012) Min-Kyung Kang et al. MATERIALS RESEARCH BULLETIN
- Preliminary study of anti-infective function of a copper-bearing stainless steel
- (2012) Ling Ren et al. Materials Science & Engineering C-Materials for Biological Applications
- Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys
- (2012) Shuhua Cai et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of the La alloying addition on the antibacterial capability of 316L stainless steel
- (2012) J.P. Yuan et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of Sn doping level on antibacterial activity and certain physical properties of ZnO films deposited using a simplified spray pyrolysis technique
- (2012) M. Vasanthi et al. SUPERLATTICES AND MICROSTRUCTURES
- Thin film metallic glasses: Unique properties and potential applications
- (2012) Jinn P. Chu et al. THIN SOLID FILMS
- Toxicity of CuO nanoparticles and Cu ions to tight epithelial cells from Xenopus laevis (A6): Effects on proliferation, cell cycle progression and cell death
- (2012) Amalie Thit et al. TOXICOLOGY IN VITRO
- Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
- (2011) D. Vojtěch et al. Acta Biomaterialia
- Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag
- (2011) Y.F. Zheng et al. Acta Biomaterialia
- Antibacterial activity and increased bone marrow stem cell functions of Zn-incorporated TiO2 coatings on titanium
- (2011) H. Hu et al. Acta Biomaterialia
- In vitro cytotoxicity of Cu2+, Zn2+, Ag+ and their mixtures on primary human endometrial epithelial cells
- (2011) Jing Wu et al. CONTRACEPTION
- Differential Effect of Common Ligands and Molecular Oxygen on Antimicrobial Activity of Silver Nanoparticles versus Silver Ions
- (2011) Zong-Ming Xiu et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Antimicrobial activity of different copper alloy surfaces against copper resistant and sensitive Salmonella enterica
- (2011) Libin Zhu et al. FOOD MICROBIOLOGY
- Zinc in the mouth, its interactions with dental enamel and possible effects on caries; a review of the literature
- (2011) Richard J.M. Lynch INTERNATIONAL DENTAL JOURNAL
- Influence of Co-Cr Particles and Co-Cr Ions on the Growth of Staphylococcal Biofilms
- (2011) Anton H. Hosman et al. INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS
- An evaluation of the processing conditions, structure, and properties (biaxial flexural strength and antibacterial efficacy) of sintered strontium–zinc–silicate glass ceramics
- (2011) Mark Looney et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Composition–structure–property relationships of the CaO–MxOy–SiO2–P2O5 (M = Zr, Mg, Sr) mesoporous bioactive glass (MBG) scaffolds
- (2011) Yufang Zhu et al. JOURNAL OF MATERIALS CHEMISTRY
- Antibacterial effect of 317L stainless steel contained copper in prevention of implant-related infection in vitro and in vivo
- (2011) Hongwei Chai et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Antibacterial activities of magnesium oxide (MgO) nanoparticles against foodborne pathogens
- (2011) Tony Jin et al. JOURNAL OF NANOPARTICLE RESEARCH
- Investigation of the mechanical and degradation properties of Mg–Sr and Mg–Zn–Sr alloys for use as potential biodegradable implant materials
- (2011) Harpreet S. Brar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of surface coating on antibacterial behavior of magnesium based metals
- (2011) Ling Ren et al. MATERIALS LETTERS
- Reprint of: Improved cytotoxicity testing of magnesium materials
- (2011) Janine Fischer et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Corrosion behavior of Ti-Ag alloys used in dentistry in lactic acid solution
- (2011) Masatoshi Takahashi et al. METALS AND MATERIALS INTERNATIONAL
- Studying the effects of micro and nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel
- (2011) B. Ramezanzadeh et al. PROGRESS IN ORGANIC COATINGS
- Microstructure and properties of Ag/N dual ions implanted titanium
- (2011) Jinbo Li et al. SURFACE & COATINGS TECHNOLOGY
- Describing the Mechanism of Antimicrobial Peptide Action with the Interfacial Activity Model
- (2010) William C. Wimley ACS Chemical Biology
- Assessing the biocompatibility of degradable metallic materials: State-of-the-art and focus on the potential of genetic regulation☆
- (2010) Agung Purnama et al. Acta Biomaterialia
- Mechanisms of Contact-Mediated Killing of Yeast Cells on Dry Metallic Copper Surfaces
- (2010) Davide Quaranta et al. APPLIED AND ENVIRONMENTAL MICROBIOLOGY
- Isolation and Characterization of Bacteria Resistant to Metallic Copper Surfaces
- (2010) C. Espirito Santo et al. APPLIED AND ENVIRONMENTAL MICROBIOLOGY
- Bacterial Killing by Dry Metallic Copper Surfaces
- (2010) Christophe Espírito Santo et al. APPLIED AND ENVIRONMENTAL MICROBIOLOGY
- Metallic Copper as an Antimicrobial Surface
- (2010) Gregor Grass et al. APPLIED AND ENVIRONMENTAL MICROBIOLOGY
- Survival of bacteria on metallic copper surfaces in a hospital trial
- (2010) André Mikolay et al. APPLIED MICROBIOLOGY AND BIOTECHNOLOGY
- Effect of silver on antibacterial properties of stainless steel
- (2010) Kuo-Hsing Liao et al. APPLIED SURFACE SCIENCE
- Biological actions of silver nanoparticles embedded in titanium controlled by micro-galvanic effects
- (2010) Huiliang Cao et al. BIOMATERIALS
- Amorphous metals for hard-tissue prosthesis
- (2010) Marios D. Demetriou et al. JOM
- Substoichiometric Levels of Cu2+Ions Accelerate the Kinetics of Fiber Formation and Promote Cell Toxicity of Amyloid-β from Alzheimer Disease
- (2010) Claire J. Sarell et al. JOURNAL OF BIOLOGICAL CHEMISTRY
- Cu Ions Dissolution from Cu-bearing Antibacterial Stainless Steel
- (2010) Li Nan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Study of copper precipitation behavior in a Cu-bearing austenitic antibacterial stainless steel
- (2010) Ling Ren et al. MATERIALS & DESIGN
- Membrane potential is important for bacterial cell division
- (2010) H. Strahl et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Induction of cytotoxicity and apoptosis in mouse blastocysts by silver nanoparticles
- (2010) Po-Wn Li et al. TOXICOLOGY LETTERS
- Effects of heat treatment on corrosion behaviors of Mg-3Zn magnesium alloy
- (2010) Xian-bin LIU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- In vitro antibacterial properties of magnesium metal against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus☆
- (2009) Duane A. Robinson et al. Acta Biomaterialia
- Proton-Coupled Electron Transfer in Biology: Results from Synergistic Studies in Natural and Model Systems
- (2009) Steven Y. Reece et al. Annual Review of Biochemistry
- Effect of Ag on the corrosion behavior of Ti–Ag alloys in artificial saliva solutions
- (2009) B.B. Zhang et al. DENTAL MATERIALS
- Electrochemical behavior of centrifuged cast and heat treated Ti–Cu alloys for medical applications
- (2009) Wislei R. Osório et al. ELECTROCHIMICA ACTA
- Prevention of pin tract infection with titanium-copper alloys
- (2009) Toshiharu Shirai et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Antibacterial coatings on titanium implants
- (2009) Lingzhou Zhao et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Does strontium play a role in the cariostatic activity of glass ionomer?
- (2009) Firas Dabsie et al. JOURNAL OF DENTISTRY
- A review of dental implants and infection
- (2009) A.D. Pye et al. JOURNAL OF HOSPITAL INFECTION
- Antimicrobial efficacy of copper touch surfaces in reducing environmental bioburden in a South African community healthcare facility
- (2009) F. Marais et al. JOURNAL OF HOSPITAL INFECTION
- Investigation of Mg(OH)2 nanoparticles as an antibacterial agent
- (2009) Chunxu Dong et al. JOURNAL OF NANOPARTICLE RESEARCH
- In vitro corrosion and biocompatibility of binary magnesium alloys
- (2008) Xuenan Gu et al. BIOMATERIALS
- Influence of adhesion to activated carbon particles on the viability of waterborne pathogenic bacteria under flow
- (2008) Henny C. van der Mei et al. BIOTECHNOLOGY AND BIOENGINEERING
- Antibacterial activity of chitosan tripolyphosphate nanoparticles loaded with various metal ions
- (2008) Wen-Li Du et al. CARBOHYDRATE POLYMERS
- Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus Attachment Patterns on Glass Surfaces with Nanoscale Roughness
- (2008) Natasa Mitik-Dineva et al. CURRENT MICROBIOLOGY
- Antibacterial Properties of Metallic Elements for Alloying Evaluated with Application of JIS Z 2801:2000
- (2008) Hiroshi Kawakami et al. ISIJ INTERNATIONAL
- Biomaterial and antibiotic strategies for peri-implantitis: A review
- (2008) P. Andrew Norowski et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Short-Term Effects of Biocorrodible Iron Stents in Porcine Coronary Arteries
- (2008) RON WAKSMAN et al. JOURNAL OF INTERVENTIONAL CARDIOLOGY
- Study on antibacterial mechanism of copper-bearing austenitic antibacterial stainless steel by atomic force microscopy
- (2008) Li Nan et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Synthesis, characterization and antibacterial property of strontium half and totally substituted hydroxyapatite nanoparticles
- (2008) Yingguang Lin et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- Reduced temperature (22–100°C) ageing of an Mg–Zn alloy
- (2008) J. Buha MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Membrane lipid homeostasis in bacteria
- (2008) Yong-Mei Zhang et al. NATURE REVIEWS MICROBIOLOGY
- ZnO nanofluids – A potential antibacterial agent
- (2008) Lingling Zhang et al. Progress in Natural Science-Materials International
- The antimicrobial activity of copper and copper alloys against nosocomial pathogens and Mycobacterium tuberculosis isolated from healthcare facilities in the Western Cape: an in-vitro study
- (2007) S. Mehtar et al. JOURNAL OF HOSPITAL INFECTION
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started