Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties
出版年份 2020 全文链接
标题
Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties
作者
关键词
-
出版物
Journal of Materials Science
Volume 56, Issue 9, Pages 5321-5427
出版商
Springer Science and Business Media LLC
发表日期
2020-12-22
DOI
10.1007/s10853-020-05509-2
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Heat capacity measurement of C14–ZrMn2 and thermodynamic re-assessment of the Mn–Zr system
- (2020) A. Kuprava et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- High-pressure hydrogen storage performances of ZrFe2 based alloys with Mn, Ti, and V addition
- (2020) Changsheng Qin et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Formation and stability of C14 type Laves phase in multi component high-entropy alloys
- (2020) S.S. Mishra et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of phosphorus content and grain size on the long-term phase stability of Ni‐base superalloys
- (2020) Linhan Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Composition dependence of hardness and elastic modulus of the cubic and hexagonal NbCo2 Laves phase polytypes studied by nanoindentation
- (2020) Wei Luo et al. JOURNAL OF MATERIALS RESEARCH
- Contrasting roles of Laves_Cr2Nb precipitates on the creep properties of novel CuCrNbZr alloys
- (2020) Ling Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and Nb-Rich Precipitation Behaviors of Inconel 718 Superalloy Under Sub-rapid Solidification Process
- (2020) Wanlin Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Ta addition on solidification characteristics of CoCrFeNiTax eutectic high entropy alloys
- (2020) Cheng Ai et al. INTERMETALLICS
- The precipitation control in aged alumina-forming austenitic stainless steels Fe-15Cr-25Ni-3Al-NbWCu by W addition and its effect on the mechanical properties
- (2020) Haojie Meng et al. MATERIALS CHARACTERIZATION
- Structure and mechanical properties of an in situ refractory Al20Cr10Nb15Ti20V25Zr10 high entropy alloy composite
- (2020) N. Yurchenko et al. MATERIALS LETTERS
- Strengthening and toughening effects in laves phase Cr2Ta/Cr in-situ composites by Si additions
- (2020) Yunlong Xue et al. VACUUM
- Emergence of a C15 Laves Phase in Diblock Polymer/Homopolymer Blends
- (2020) Andreas J. Mueller et al. ACS Macro Letters
- Investigation on the Laves phase formation during laser cladding of IN718 alloy by CA-FE
- (2020) Hualong Xie et al. Journal of Manufacturing Processes
- Additive manufacturing of compositionally graded laser deposited titanium-chromium alloys
- (2020) J. Thomas et al. Additive Manufacturing
- Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding
- (2020) Kang Xiang et al. APPLIED SURFACE SCIENCE
- The improved strength and toughness in the quinary Cr2Nb/Cr in-situ composite
- (2020) Yunlong Xue et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High-capacity Zr-based AB2-type alloys as metal hydride battery anodes
- (2020) ChuBin Wan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Design and fabrication of a cryogenic magnetocaloric composite by spark plasma sintering based on the RAl2 laves phases (R = Ho, Er)
- (2020) J.L. Sánchez Llamazares et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation of non-equilibrium ductile solid solutions and textures in NbCr2 bulks produced by mechanical milling and spark plasma sintering
- (2020) Fei Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of bending strength via introduced (Dy,Tb)Cu phase at grain boundary on giant magnetostrictive Tb-Dy-Fe alloy by diffusing Dy–Cu alloys
- (2020) Zhiguang Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of Hf on the microstructure and mechanical properties of CoCrFeNi high entropy alloy
- (2020) Huan Ma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hydrides of Laves type Ti–Zr alloys with enhanced H storage capacity as advanced metal hydride battery anodes
- (2020) Ika Dewi Wijayanti et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tuning the structure and intrinsic magnetic properties of Ce2Fe14B alloys by elimination of CeFe2 with La substitution
- (2020) Zhi Li et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Spin configuration, magnetic and magnetostrictive properties of Tb0.27Dy0.73-xNdxFe2 compounds
- (2020) Adil Murtaza et al. MATERIALS CHEMISTRY AND PHYSICS
- Hydrogen order in hydrides of Laves phases
- (2020) Holger Kohlmann Zeitschrift fur Kristallographie-Crystalline Materials
- Microstructure evolution and strengthening mechanism of laser-cladding MoFe CrTiWAlNb refractory high-entropy alloy coatings
- (2020) Yaxiong Guo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Giant negative thermal expansion across the first-order magnetoelastic transition in Hf0.86Ta0.14Fe2
- (2020) L.V.B. Diop et al. JOURNAL OF ALLOYS AND COMPOUNDS
- CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements
- (2019) Gang Qin et al. JOURNAL OF MATERIALS RESEARCH
- Intermetallic Phases in High-Entropy Alloys: Statistical Analysis of their Prevalence and Structural Inheritance
- (2019) Ming-Hung Tsai et al. Metals
- Semi-hard magnetic nanocomposites based on out-of-equilibrium Fe2+δNb and Fe2+δTa Laves phases
- (2019) A. M. Gabay et al. AIP Advances
- Ternary transition metal gallides with TiNiSi, ZrBeSi and MgZn2-type structure
- (2019) Lukas Heletta et al. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES
- Microstructure and properties of Cu-Cr-Nb alloy with high strength, high electrical conductivity and good softening resistance performance at elevated temperature
- (2019) Xiaoli Guo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Creep behavior and damage evolution of T92/Super304H dissimilar weld joints
- (2019) Xiao-wei Zhai et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Study of hydrogen storage and electrochemical properties of AB2-type Ti0.15Zr0.85La0.03Ni1.2Mn0.7V0.12Fe0.12 alloy
- (2019) Alexei A. Volodin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and Mechanical Properties of WMoNbCrTi HEAs Sintered from the Powders Milled for Different Durations
- (2019) Jianhui Yan et al. JOM
- Structure and defects evolution at temperature and activation treatments of the TiCr2 intermetallic compound of Laves phase C36-type
- (2019) T.L. Murashkina et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Application of hydrides in hydrogen storage and compression: Achievements, outlook and perspectives
- (2019) Jose Bellosta von Colbe et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Iron Aluminides
- (2019) Martin Palm et al. Annual Review of Materials Research
- Model for hydrogen desorption plateau pressure of AB2 type-Tix(CrFeMn)2 alloys
- (2019) Jigang Li et al. INTERMETALLICS
- Metal hydride hydrogen storage tank for fuel cell utility vehicles
- (2019) Mykhaylo Lototskyy et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructural Evolution, Precipitation and Mechanical Properties of 27Cr-4Mo-2Ni Super-Ferritic Stainless Steels
- (2019) Hui-Hu Lu et al. JOM
- Achieving superior de-/hydrogenation properties of C15 Laves phase Y-Fe-Al alloys by A-side substitution
- (2019) Ziming Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Comparative cyclic oxidation behaviour and effect of oxides on hardness of wear resistance coating alloys T-401 and T-900
- (2019) Abdul Rehman et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Formation of intermetallics and its effect on microstructure and mechanical properties of 27Cr-4Mo-2Ni super ferritic steels
- (2019) Hui-Hu Lu et al. MATERIALS CHARACTERIZATION
- On the role of Laves phases on the mechanical properties of Mg-Al-Ca alloys
- (2019) M. Zubair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Plastic deformation of single crystalline C14 Mg2Ca Laves phase at room temperature
- (2019) Christoffer Zehnder et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cooling effects on microstructure and mechanical properties of 27Cr–4Mo–2Ni ferritic stainless steel
- (2019) Hong-Kui Guo et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM)
- (2019) Durejko et al. Materials
- Deformation and strength characteristics of Laves phases in titanium alloys
- (2019) C.D. Rabadia et al. MATERIALS & DESIGN
- A Review on High Entropy Alloys Coatings: Fabrication Processes and Property Assessment
- (2019) Junchen Li et al. ADVANCED ENGINEERING MATERIALS
- Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase
- (2019) A. Emdadi et al. INTERMETALLICS
- An ultra-high strength CrMoNbWTi-C high entropy alloy co-strengthened by dispersed refractory IM and UHTC phases
- (2019) Shasha Lv et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Basal slip in Laves phases: The synchroshear dislocation
- (2019) Julien Guénolé et al. SCRIPTA MATERIALIA
- New Ferritic Stainless Steel for Service Temperatures up to 1050 °C Utilizing Intermetallic Phase Transformation
- (2019) Timo Juuti et al. Metals
- Heat capacity measurement of Zr2Fe and thermodynamic re-assessment of the Fe–Zr system
- (2019) I. Saenko et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Argon-neon binary diagram and ArNe2 Laves phase
- (2019) Agnès Dewaele et al. JOURNAL OF CHEMICAL PHYSICS
- Evolution of B2 and laves phases in a ferritic steel under Fe2+ ion irradiation at 475 °C
- (2019) Li He et al. JOURNAL OF NUCLEAR MATERIALS
- Compositional tuning-induced permanent color adjustment and mechanical properties: Binary Cu-Mg colored metallic system
- (2019) Yeon Beom Jeong et al. MATERIALS & DESIGN
- Ab initio phase stabilities of Ce-based hard magnetic materials and comparison with experimental phase diagrams
- (2019) Halil İbrahim Sözen et al. Physical Review Materials
- Prediction of the Reactivity of Argon with Xenon under High Pressures
- (2019) Xiao Z. Yan et al. ACS Omega
- Rearrangement of interstitial defects in alpha-Fe under extreme condition
- (2019) A. Chartier et al. ACTA MATERIALIA
- Shear deformation determined by short-range configuration of atoms in topologically close-packed crystal
- (2019) Yongchao Zhang et al. ACTA MATERIALIA
- A metal hydride air-conditioning system for fuel cell vehicles – Functional demonstration
- (2019) C. Weckerle et al. APPLIED ENERGY
- Enhancement of cyclic oxidation resistance and effect of transition oxides on wear mechanism of yttrium plus aluminium modified tribaloy T-900 alloy
- (2019) Abdul Rehman et al. CORROSION SCIENCE
- Identification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloy
- (2019) Li Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermodynamic modelling of the Fe–Sn–Zr system based on new experiments and first-principles calculations
- (2019) Paul Lafaye et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The High-Temperature Mechanical Properties of EN 1.4509 Stainless Steel Cast Using Investment Casting
- (2019) Y. K. Hu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
- (2019) C.D. Rabadia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Creep behavior of a 10%Cr heat-resistant martensitic steel with low nitrogen and high boron contents at 650 °C
- (2019) N. Dudova et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the element segregation and Laves phase formation in the carbon nanotubes reinforced IN718 superalloy by laser cladding
- (2019) Yuan Chen et al. POWDER TECHNOLOGY
- Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe2
- (2019) M. Šlapáková et al. ACTA MATERIALIA
- Crystal structure and composition dependence of mechanical properties of single-crystalline NbCo2 Laves phase
- (2019) W. Luo et al. ACTA MATERIALIA
- A metal hydride air-conditioning system for fuel cell vehicles – Performance investigations
- (2019) C. Weckerle et al. APPLIED ENERGY
- The Co–Ti system revisited: About the cubic-to-hexagonal Laves phase transformation and other controversial features of the phase diagram
- (2019) Frank Stein et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Impact of magnetism on the phase stability of rare-earth based hard magnetic materials
- (2019) Halil İbrahim Sözen et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- MoFe1.5CrTiWAlNbx refractory high-entropy alloy coating fabricated by laser cladding
- (2019) Huilin Wang et al. INTERMETALLICS
- First-principles investigations of effects of solute elements on stability and electronic structure of laves phase/matrix interface in Ni-based superalloys
- (2019) Huixin Jin et al. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
- Superconductivity in Mg2Ir3Si: A Fully Ordered Laves Phase
- (2019) Kazutaka Kudo et al. JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN
- Tuning nanostructure using thermo-mechanical processing for enhancing mechanical properties of complex intermetallic containing CoCrFeNi2.1Nbx high entropy alloys
- (2019) U. Sunkari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition
- (2019) Yaocheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Creep strength breakdown and microstructure in a 9%Cr steel with high B and low N contents
- (2019) E. Tkachev et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reversible room temperature hydrogen storage in high-entropy alloy TiZrCrMnFeNi
- (2019) Parisa Edalati et al. SCRIPTA MATERIALIA
- Modeling and optimization for laser cladding via multi-objective quantum-behaved particle swarm optimization algorithm
- (2019) Minyu Ma et al. SURFACE & COATINGS TECHNOLOGY
- CoMoCrSi coatings prepared by high-velocity oxygen fuel spraying: microstructure and mechanical properties at elevated temperatures up to 800 °C
- (2019) Hongjian Guo et al. Materials Research Express
- On the phase constituents of three CoCrFeNiX (X = V, Nb, Ta) high-entropy alloys after prolonged annealing
- (2019) An-Chen Fan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Micellar Mimicry of Intermetallic C14 and C15 Laves Phases by Aqueous Lyotropic Self-Assembly
- (2018) Carlos M. Baez-Cotto et al. ACS Nano
- Effects of Laves phase particles on recovery and recrystallization behaviors of Nb-containing FeCrAl alloys
- (2018) Zhiqian Sun et al. ACTA MATERIALIA
- Thermodynamic re-assessment of binary Cr-Nb system down to 0 K
- (2018) Yuxun Jiang et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- The role of (FeCrSi) 2 (MoNb)-type Laves phase on the formation of Mn-rich protective oxide scale on ferritic stainless steel
- (2018) Harri Ali-Löytty et al. CORROSION SCIENCE
- High Temperature Oxidation Behavior of Ferritic Stainless Steel Containing W and Ce
- (2018) Liangliang Wei et al. CORROSION SCIENCE
- Prediction of site occupancy of C15 Laves phase at finite temperature based on quasi-harmonic approximation model
- (2018) Zhenyi Wei et al. INTERMETALLICS
- Crystal structure and hydrogen storage properties of Ti-V-Mn alloys
- (2018) X.Y. Chen et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting
- (2018) Xing Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Communication: From close-packed to topologically close-packed: Formation of Laves phases in moderately polydisperse hard-sphere mixtures
- (2018) Beth A. Lindquist et al. JOURNAL OF CHEMICAL PHYSICS
- Microstructures and mechanical properties of Nb-alloyed CoCrCuFeNi high-entropy alloys
- (2018) Gang Qin et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Gd(Co 1-x Ga x ) 2 : Synthesis, crystal structures, and investigation of structural transformations and magnetic properties
- (2018) Fang Yuan et al. JOURNAL OF SOLID STATE CHEMISTRY
- Precipitation hardening in CoCrFeNi-based high entropy alloys
- (2018) W.H. Liu et al. MATERIALS CHEMISTRY AND PHYSICS
- Effect of Fe 2 Zr phase on the mechanical properties and fracture behavior of Fe-Cr-W-Zr ferritic alloy
- (2018) Xiaojie Jin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Factors controlling ambient and high temperature yield strength of ferritic stainless steel susceptible to intermetallic phase formation
- (2018) Timo Juuti et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the effect of ageing on laves phase evolution and their effect on mechanical properties of P92 steel
- (2018) Nitin Saini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-temperature strengthening mechanisms of Laves and B2 precipitates in a novel ferritic alloy
- (2018) Tianyi Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the origin of the superior long-term creep resistance of a 10% Cr steel
- (2018) R. Mishnev et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Atomic Size Factors on the Phase Stability of Laves Phase in Nb-Cr-Ni-Al and Nb-V-Ni-Al Phase Diagrams
- (2018) Takuya Yamanouchi et al. MATERIALS TRANSACTIONS
- Thermodynamic Stability of Mg-Based Laves Phases
- (2018) Shoya Kawano et al. MATERIALS TRANSACTIONS
- The Effect of Nb Addition on the Microstructure and the High-Temperature Strength of Fe3Al Aluminide
- (2018) Petr Kratochvíl et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Compositional Changes of Laves Phase Precipitate on Grain Boundary Embrittlement in Long-Term Annealed 9 Pct Cr Ferritic Steel
- (2018) Cheoljun Bae et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure evolution and dislocation behaviour in high chromium, fully ferritic steels strengthened by intermetallic Laves phases
- (2018) Jennifer Lopez Barrilao et al. MICRON
- First-principles study of structural phase transition, electronic, elastic and thermodynamic properties of C15-type Laves phase TiCr 2 under pressure
- (2018) Li-Zhi He et al. PHYSICA B-CONDENSED MATTER
- Origins of low-symmetry phases in asymmetric diblock copolymer melts
- (2018) Kyungtae Kim et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Towards the colloidal Laves phase from binary hard-sphere mixtures via sedimentation
- (2018) Tonnishtha Dasgupta et al. Soft Matter
- Formation of Laves phases in buoyancy matched hard sphere suspensions
- (2018) N. Schaertl et al. Soft Matter
- Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy
- (2018) Mohammad Javad Sohrabi et al. VACUUM
- High-temperature sliding wear behaviour of Stellite®12 and Tribaloy®T400
- (2018) Alexander Renz et al. WEAR
- Alloying and Properties of C14–NbCr2 and A15–Nb3X (X = Al, Ge, Si, Sn) in Nb–Silicide-Based Alloys
- (2018) Panos Tsakiropoulos Materials
- On Nb Silicide Based Alloys: Alloy Design and Selection
- (2018) Panos. Tsakiropoulos Materials
- Assessment of off-stoichiometric Zr33-xFe52+xSi15 C14 Laves phase compounds as permanent magnet materials
- (2018) A. M. Gabay et al. AIP Advances
- Rhombohedral Distortion of the Cubic MgCu2-Type Structure in Ca2Pt3Ga and Ca2Pd3Ga
- (2018) Asa Toombs et al. Crystals
- Lattice Correspondence and Growth Structures of Monoclinic Mg4Zn7 Phase Growing on an Icosahedral Quasicrystal
- (2018) Alok Singh et al. Crystals
- Investigations on the microstructure and mechanical properties of dissimilar welds of inconel 718 and sulphur rich martensitic stainless steel, AISI 416
- (2018) Sidharth Dev et al. Journal of Manufacturing Processes
- Influence of composition and crystal structure on the fracture toughness of NbCo 2 Laves phase studied by micro-cantilever bending tests
- (2018) W. Luo et al. MATERIALS & DESIGN
- Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Development of novel Cu-Cr-Nb-Zr alloys with the aid of computational thermodynamics
- (2018) Ying Yang et al. MATERIALS & DESIGN
- A Review of Calphad Modeling of Ordered Phases
- (2018) Bo Sundman et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Microstructural evolution and mechanical properties of 27Cr-4Mo-2Ni ferritic stainless steel during isothermal aging
- (2018) Hui-Hu Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Ca/Al ratio and extrusion process on Mg–Al–Ca alloys to produce a high toughness in-situ composite
- (2018) F. Khorasani et al. PHILOSOPHICAL MAGAZINE
- Fabrication methods for high-performance miniature disks of Terfenol-D for energy harvesting
- (2018) V. Issindou et al. SENSORS AND ACTUATORS A-PHYSICAL
- Rare Earth (RE ) Gallides with Closely Related Compositions: RE IrGa and RE 6 Ir5 Ga7
- (2018) Fabian Eustermann et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- Structural and magnetic investigations of the pseudo-ternary RE2TAl3 series (RE=Sc, Y, La–Nd, Sm, Gd–Lu; T=Ru, Rh, Ir) – size dependent formation of two different structure types
- (2018) Fabian Eustermann et al. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES
- Hierarchical Eutectic Structure Enabling Superior Fracture Toughness and Superb Strength in CoCrFeNiNb0.5 Eutectic High Entropy Alloy at Room Temperature
- (2018) Dukhyun Chung et al. ADVANCED ENGINEERING MATERIALS
- Thermal Stability of the HfNbTiVZr High-Entropy Alloy
- (2018) Victor Pacheco et al. INORGANIC CHEMISTRY
- Microstructure and phase evolution in spark plasma sintering of the NbCr2 Laves phase matrix composite toughened with ductile Cr phase
- (2018) Kewei Li et al. JOURNAL OF MATERIALS RESEARCH
- Atomic interactions in C15 Laves phases
- (2018) J.-C. Crivello et al. JOURNAL OF MATERIALS SCIENCE
- Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg‑Al2Ca‑Mg2Ca in-situ composite by hot extrusion
- (2018) F. Khorasani et al. MATERIALS CHARACTERIZATION
- Crystallographic features of the Al3Nb, Nb2Al and Nb(Ni1−XAlX)2 phases in a directionally solidified ternary eutectic microstructure
- (2018) Eder S.N. Lopes et al. MATERIALS CHARACTERIZATION
- Connecting the Simpler Structures to Topologically Close-Packed Phases
- (2018) Anirudh Raju Natarajan et al. PHYSICAL REVIEW LETTERS
- Fretting wear properties of HVOF-sprayed CoMoCrSi coatings with different spraying parameters
- (2018) Wen-jin Yang et al. SURFACE & COATINGS TECHNOLOGY
- Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Microstructural evolution, precipitation and mechanical properties of hot rolled 27Cr-4Mo-2Ni ferritic steel during 800 °C aging
- (2018) Hui-Hu Lu et al. MATERIALS & DESIGN
- The effect of phosphorus on the formation of grain boundary laves phase in high-refractory content Ni-based superalloys
- (2018) Stoichko Antonov et al. SCRIPTA MATERIALIA
- Microstructural Evolution and Mechanical Properties of a Three-Phase Alloy in the Cr–Mo–Nb System
- (2018) Li Peng et al. MATERIALS TRANSACTIONS
- Deformation induced precipitation of MgZn2-type laves phase in Ti-Fe-Co alloy
- (2018) L.M. Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys
- (2018) Yuan Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermodynamic assessment of the Co-Ta system
- (2018) Peisheng Wang et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
- (2018) Shang Sui et al. ACTA MATERIALIA
- Laves Phase in a 12% Cr Martensitic/Ferritic Steel: Evolution and Characterization of Nanoparticles at 650 °C
- (2018) Juan Pablo Sanhueza et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Structure and Phase Transformation in the Giant Magnetostriction Laves-Phase SmFe2
- (2017) Xiaonan Liu et al. INORGANIC CHEMISTRY
- Network Formation by Condensed Tetrahedral [Au3Al] Units in Na2Au3Al: Crystal and Electronic Structure, Spectroscopic Investigations, and Physical Properties of an Ordered Ternary Auride
- (2017) Frank Stegemann et al. INORGANIC CHEMISTRY
- The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process
- (2017) Shang Sui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of the structural, thermodynamic and cyclic effects of vanadium and titanium substitution in laves-phase AB 2 hydrogen storage alloys
- (2017) Ulrich Ulmer et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Open and closed metal hydride system for high thermal power applications: Preheating vehicle components
- (2017) Mila Dieterich et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Temperature dependence of phase composition in W and Si-alloyed high chromium ferritic steels for SOFC interconnect applications
- (2017) L. Niewolak et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Ab-initio study of C and N point defects in the C14-Fe 2 Nb phase
- (2017) A.N. Ladines et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hydrogen storage and hydrogen generation properties of CaMg 2 -based alloys
- (2017) Miaolian Ma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Magnetocaloric effect and magnetostrictive deformation in Tb-Dy-Gd-Co-Al with Laves phase structure
- (2017) G.A. Politova et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Sensitivity of Liquation Cracking to Deposition Parameters and Residual Stresses in Laser Deposited IN718 Alloy
- (2017) Yaocheng Zhang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Consumable selection for arc welding between Stainless Steel 410 and Inconel 718
- (2017) Fatemeh Hejripour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Precipitation and hot deformation behavior of austenitic heat-resistant steels: A review
- (2017) Yinghui Zhou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of prior deformation on microstructural development and Laves phase precipitation in high-chromium stainless steel
- (2017) Z.-W. HSIAO et al. JOURNAL OF MICROSCOPY
- Site occupancy of transition elements in C15 NbCr2 laves phase: A first-principles study
- (2017) Q. Long et al. Journal of Mining and Metallurgy Section B-Metallurgy
- First-principles investigation of point defect and atomic diffusion in Al 2 Ca
- (2017) Xiao Tian et al. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
- Standardized hydrogen storage module with high utilization factor based on metal hydride-graphite composites
- (2017) Inga Bürger et al. JOURNAL OF POWER SOURCES
- Progress of hydrogen storage alloys for Ni-MH rechargeable power batteries in electric vehicles: A review
- (2017) Liuzhang Ouyang et al. MATERIALS CHEMISTRY AND PHYSICS
- The formation and stacking faults of Fe and Cr containing Laves phase in Zircaloy-4 alloy
- (2017) Guoqin Cao et al. MATERIALS LETTERS
- Effects of Al and Zn contents on the microstructure and mechanical properties of Mg-Al-Zn-Ca magnesium alloys
- (2017) Fang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Laves phase on creep strength of modified 9Cr-1Mo steel
- (2017) X.Z. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design of Novel Precipitate-Strengthened Al-Co-Cr-Fe-Nb-Ni High-Entropy Superalloys
- (2017) Stoichko Antonov et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Phase Stability in the Fe-Rich Fe-Cr-Ni-Zr Alloys
- (2017) Tianyi Chen et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Phase Evolution in and Creep Properties of Nb-Rich Nb-Si-Cr Eutectics
- (2017) Florian Gang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Heterogeneous Creep Deformations and Correlation to Microstructures in Fe-30Cr-3Al Alloys Strengthened by an Fe2Nb Laves Phase
- (2017) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Identification, size classification and evolution of Laves phase precipitates in high chromium, fully ferritic steels
- (2017) Jennifer Lopez Barrilao et al. MICRON
- Colloidal alloys with preassembled clusters and spheres
- (2017) Étienne Ducrot et al. NATURE MATERIALS
- Synthesis of a single phase of high-entropy Laves intermetallics in the Ti–Zr–V–Cr–Ni equiatomic alloy
- (2017) T. P. Yadav et al. PHILOSOPHICAL MAGAZINE LETTERS
- High-entropy alloys: Interrelations between electron concentration, phase composition, lattice parameter, and properties
- (2017) V. F. Gorban’ et al. PHYSICS OF METALS AND METALLOGRAPHY
- Hydrogen storage properties of (Ti 0.85 Zr 0.15 ) 1.05 Mn 1.2 Cr 0.6 V 0.1 M 0.1 (M=Ni, Fe, Cu) alloys easily activated at room temperature
- (2017) Peng Liu et al. Progress in Natural Science-Materials International
- Thermal processing of diblock copolymer melts mimics metallurgy
- (2017) Kyungtae Kim et al. SCIENCE
- Laves phase intermetallic matrix composite in situ toughened by ductile precipitates
- (2017) Alexander J Knowles et al. SCRIPTA MATERIALIA
- Wear of hardfaced valve spindles in highly loaded stationary lean-burn large bore gas engines
- (2017) Alexander Renz et al. WEAR
- Characteristics of hot cracking in dissimilar joint of A690 overlay and stainless steel clad
- (2017) Gyoungback Ko et al. Welding in the World
- The Influence of the Valence Electron Concentration on the Structural Variation of the Laves Phases MgNi2-x Ge x
- (2017) Lisa Siggelkow et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- Ternary rhombohedral Laves phases RE2Rh3Ga (RE = Y, La–Nd, Sm, Gd–Er)
- (2017) Stefan Seidel et al. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES
- Microcompression of brittle and anisotropic crystals: recent advances and current challenges in studying plasticity in hard materials
- (2017) Sandra Korte-Kerzel MRS Communications
- Hydrogen storage properties of (Ti 0.85 Zr 0.15 ) 1.05 Mn 1.2 Cr 0.6 V 0.1 M 0.1 (M=Ni, Fe, Cu) alloys easily activated at room temperature
- (2017) Peng Liu et al. Progress in Natural Science-Materials International
- Investigations on the microstructure, tensile strength and high temperature corrosion behaviour of Inconel 625 and Inconel 718 dissimilar joints
- (2017) K. Devendranath Ramkumar et al. Journal of Manufacturing Processes
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
- (2017) Hui Xiao et al. MATERIALS & DESIGN
- Stacking faults in Zr(Fe, Cr)2 Laves structured secondary phase particle in Zircaloy-4 alloy
- (2017) Chengze Liu et al. Nanoscale
- Development of a modular room-temperature hydride storage system for vehicular applications
- (2016) Giovanni Capurso et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Liquidus projection and thermodynamic modeling of the Cr-Fe-Nb ternary system
- (2016) Aurélie Jacob et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Point defects and Zn-doping in defective Laves phase C15 MgCu 2 : A first-principles study
- (2016) Jie Zheng et al. COMPUTATIONAL MATERIALS SCIENCE
- Predicting an alloying strategy for improving fracture toughness of C15 NbCr 2 Laves phase: A first-principles study
- (2016) Qianxin Long et al. COMPUTATIONAL MATERIALS SCIENCE
- Nanoindentation study on solid solution softening of Fe-rich Fe 2 Nb Laves phase by Ni in Fe–Nb–Ni ternary alloys
- (2016) Naoki Takata et al. INTERMETALLICS
- High temperature cyclic oxidation behavior of ferritic stainless steel with addition of alloying elements Nb and Ti for use in SOFCs interconnect
- (2016) Azim Safikhani et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrogen occlusion behaviors of ZrVFe alloys under mild hydrogen pressures and lowering of their hydrogen desorption temperatures
- (2016) Yasuhiro Watanuki et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Metal hydride hydrogen storage and supply systems for electric forklift with low-temperature proton exchange membrane fuel cell power module
- (2016) Mykhaylo V. Lototskyy et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Development of ZrFeV alloys for hybrid hydrogen storage system
- (2016) Zhijie Cao et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructural evolution and creep of Fe–Al–Ta alloys
- (2016) Petra Prokopčáková et al. International Journal of Materials Research
- Magnesium Powder Injection Molding (MIM) of Orthopedic Implants for Biomedical Applications
- (2016) M. Wolff et al. JOM
- Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
- (2016) M. M. Kirka et al. JOM
- First-principles study of point defects in C14 MgZn2 Laves phase
- (2016) Lin Shao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Designing eutectic high entropy alloys of CoCrFeNiNb x
- (2016) Feng He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al
- (2016) H. Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Growth Kinetics of Laves Phase and Its Effect on Creep Rupture Behavior in 9Cr Heat Resistant Steel
- (2016) Zhi-xin XIA et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Effects of Cr Content on the Microstructure and Properties of 26Cr–3.5Mo–2Ni and 29Cr–3.5Mo–2Ni Super Ferritic Stainless Steels
- (2016) Li Ma et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Performance of electric forklift with low-temperature polymer exchange membrane fuel cell power module and metal hydride hydrogen storage extension tank
- (2016) Mykhaylo V. Lototskyy et al. JOURNAL OF POWER SOURCES
- Quantum Phase Transitions and Multicriticality in Ta(Fe1−xVx)2
- (2016) Manuel Brando et al. JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN
- Microstructure Evolution and Wear Behavior of the Laser Cladded CoFeNi2V0.5Nb0.75 and CoFeNi2V0.5Nb High-Entropy Alloy Coatings
- (2016) Li Jiang et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys
- (2016) N.Yu. Yurchenko et al. MATERIALS CHARACTERIZATION
- Mechanical properties of austenitic heat-resistant Fe–20Cr–30Ni–2Nb steel at ambient temperature
- (2016) Naoya Kanno et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improving the high-temperature creep strength of 15Cr ferritic creep-resistant steels at temperatures of 923–1023 K
- (2016) M. Shibuya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of a novel near-α titanium alloy Ti6.0Al4.5Cr1.5Mn
- (2016) Hong-bin Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Creep strength breakdown and microstructure evolution in a 3%Co modified P92 steel
- (2016) A. Fedoseeva et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and room-temperature mechanical properties of as-cast and heat-treated Fe50Al50−nNbn alloys (n=1, 3, 5, 7, and 9at%)
- (2016) Mehmet Yildirim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Nb content on grain size and mechanical properties of 18wt% Cr ferritic stainless steel
- (2016) Y. Kang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation and effect of topologically close-packed phases in nickel-base superalloys
- (2016) A. S. Wilson MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure and fracture toughness of Cr/Cr2Nb alloys with trace Y addition
- (2016) K. W. Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- Laves-phase formation criterion for high-entropy alloys
- (2016) N. Yurchenko et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure of intermetallic particle strengthened high-chromium fully ferritic steels
- (2016) J. Lopez Barrilao et al. MATERIALS SCIENCE AND TECHNOLOGY
- Phase evolution, microstructure and mechanical properties of equi-atomic substituted TiZrHfNiCu and TiZrHfNiCuM (M = Co, Nb) high-entropy alloys
- (2016) Hae Jin Park et al. METALS AND MATERIALS INTERNATIONAL
- Effect of Thermal Aging on Microstructure and Mechanical Properties of China Low-Activation Martensitic Steel at 550 °C
- (2016) Wei Wang et al. Nuclear Engineering and Technology
- Hiding in Plain View: Colloidal Self-Assembly from Polydisperse Populations
- (2016) Bernard Cabane et al. PHYSICAL REVIEW LETTERS
- Review on powder-bed laser additive manufacturing of Inconel 718 parts
- (2016) Xiaoqing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Cavitation erosion of plasma-sprayed CoMoCrSi coatings
- (2016) Yan Wang et al. TRIBOLOGY INTERNATIONAL
- Enhanced mechanical properties of NbCr2 Laves phase by spark plasma sintering
- (2016) K.W. Li et al. VACUUM
- Yb6Ir5Ga7- A MgZn2Superstructure
- (2016) Stefan Seidel et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- The new barium compound Ba4Al7+x: formation and crystal structure
- (2016) Yurii Prots et al. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES
- Balancing structural distortions via competing 4f and itinerant interactions: a case of polymorphism in magnetocaloric HoCo2
- (2016) Y. Mudryk et al. Journal of Materials Chemistry C
- A Review on the Properties of Iron Aluminide Intermetallics
- (2016) Mohammad Zamanzade et al. Crystals
- Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
- (2016) Alejandro Hinojos et al. MATERIALS & DESIGN
- Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Evidence for a C14 Frank–Kasper Phase in One-Size Gold Nanoparticle Superlattices
- (2015) Stéphanie Hajiw et al. ACS Nano
- The nucleation of Mo-rich Laves phase particles adjacent to M 23 C 6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels
- (2015) M.I. Isik et al. ACTA MATERIALIA
- Thermodynamic modeling of Cr–Nb and Zr–Cr with extension to the ternary Zr–Nb–Cr system
- (2015) Hai-Jin Lu et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Gibbs energy modeling of Fe–Ta system by Calphad method assisted by experiments and ab initio calculations
- (2015) V.B. Rajkumar et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- The native point defects in C14 Mg 2 Ca Laves phase: A first-principles study
- (2015) Lin Shao et al. INTERMETALLICS
- Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys
- (2015) W.H. Liu et al. INTERMETALLICS
- Optimization of AB 2 type alloy composition with superior hydrogen storage properties for stationary applications
- (2015) Kandavel Manickam et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Long-term cycle stability of metal hydride-graphite composites
- (2015) Mila Dieterich et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Formation of the Fe2Hf Laves Phase Along the Eutectoid-type Reaction Path of δ-Fe→γ-Fe+Fe2Hf in an Fe-9Cr Based Alloy
- (2015) Satoru Kobayashi et al. ISIJ INTERNATIONAL
- Microstructures and hydrogenation properties of (ZrTi)(V1−xAlx)2 Laves phase intermetallic compounds
- (2015) Tiandong Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Cr–Fe–Nb ternary system: Experimental isothermal sections at 700 °C, 1050 °C and 1350 °C
- (2015) Aurélie Jacob et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High pressure synthesis of a new phase of YbAg 2 : Structure, valence of Yb and properties
- (2015) A.V. Tsvyashchenko et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Composition design of Ti–Cr–Mn–Fe alloys for hybrid high-pressure metal hydride tanks
- (2015) Zhijie Cao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural design of new high conductivity – high strength Cu-based alloy
- (2015) S. Gorsse et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermodynamic description of the systems Co–Nb, Al–Nb and Co–Al–Nb
- (2015) Cuiyun He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study on the nucleation and growth of Laves phase in a 10% Cr martensite ferritic steel after long-term aging
- (2015) Yuantao Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microsegregation and precipitates of an as-cast Co-based superalloy—microstructural characterization and phase stability modelling
- (2015) J. Koßmann et al. JOURNAL OF MATERIALS SCIENCE
- Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
- (2015) Y. Yamamoto et al. JOURNAL OF NUCLEAR MATERIALS
- Transmission electron microscopy characterization of Zircaloy-4 and ZIRLO™ oxide layers
- (2015) Benoit de Gabory et al. JOURNAL OF NUCLEAR MATERIALS
- Temperature Dependence of Laves Phase Composition in Nb, W and Si-Alloyed High Chromium Ferritic Steels for SOFC Interconnect Applications
- (2015) L. Niewolak et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Laves phase in alloy 718 fusion zone — microscopic and calorimetric studies
- (2015) S.G.K. Manikandan et al. MATERIALS CHARACTERIZATION
- Characterization of fracture toughness and toughening mechanisms in Laves phase Cr 2 Nb based alloys
- (2015) Y.L. Xue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical properties of Mg–Al–Ca alloys affected by Ca/Al ratio
- (2015) Li Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of tungsten addition on high-temperature properties and microstructure of alumina-forming austenitic heat-resistant steels
- (2015) Min-Ho Jang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of aging on the microstructure and mechanical behavior of the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al
- (2015) Geneva Trotter et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels
- (2015) B. Hu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Laves Phase on High-Temperature Deformation and Microstructure Evolution in an 18Cr-2Mo-0.5Nb Ferritic Stainless Steel
- (2015) Ken-ichi Ikeda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effect of Laves Phase (Fe,Al)2Zr on the High-Temperature Strength of Carbon-Alloyed Fe3Al Aluminide
- (2015) Petr Kratochvíl et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Creep Behavior, Deformation Mechanisms, and Creep Life of Mod.9Cr-1Mo Steel
- (2015) Fujio ABE METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characterization of Laves phase in Crofer 22 H stainless steel
- (2015) Zheng-Wen Hsiao et al. MICRON
- Effects of ion irradiation on microstructure and properties of zirconium alloys—A review
- (2015) Chunguang Yan et al. Nuclear Engineering and Technology
- Orientation relationships of Laves phase and NiAl particles in an AFA stainless steel
- (2015) Geneva Trotter et al. PHILOSOPHICAL MAGAZINE
- Dirac metal to topological metal transition at a structural phase change inAu2Pband prediction ofZ2topology for the superconductor
- (2015) Leslie M. Schoop et al. PHYSICAL REVIEW B
- Crystal-Like Rearrangements of Icosahedra in Simulated Copper-Zirconium Metallic Glasses and their Effect on Mechanical Properties
- (2015) J. Zemp et al. PHYSICAL REVIEW LETTERS
- Formation of prismatic loops from C15 Laves phase interstitial clusters in body-centered cubic iron
- (2015) Yongfeng Zhang et al. SCRIPTA MATERIALIA
- Influence of Valence Electron Concentration on Laves Phases: Structures and Phase Stability of Pseudo-Binary MgZn2-xPdx
- (2015) Srinivasa Thimmaiah et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- Microstructure, Creep and Thermomechanical Fatigue of Novel Solid Solution and Laves Phase Strengthened Cr2O3 and Al2O3 Forming Ferrites for Car Engine Exhaust and Heat Exchanger Systems
- (2015) Tilmann Beck et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Microstructure and Wear Behavior of CoCrFeMnNbNi High-Entropy Alloy Coating by TIG Cladding
- (2015) Wen-yi Huo et al. Advances in Materials Science and Engineering
- Irregular Homogeneity Domains in Ternary Intermetallic Systems
- (2015) Jean-Marc Joubert et al. Applied Sciences-Basel
- MICROSTRUCTURE, MECHANICAL, FRICTION AND WEAR PROPERTIES OF NiAl-2.5Ta-7.5Cr-1B ALLOY
- (2015) Zhensheng WANG et al. ACTA METALLURGICA SINICA
- On the nucleation of Laves phase particles during high-temperature exposure and creep of tempered martensite ferritic steels
- (2014) M.I. Isik et al. ACTA MATERIALIA
- Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
- (2014) Pulin Nie et al. ACTA MATERIALIA
- Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
- (2014) O.N. Senkov et al. ACTA MATERIALIA
- Effect of yttrium and aluminum additions on isothermal oxidation behavior of Tribaloy T-700 alloys
- (2014) X.H. Zhang et al. CORROSION SCIENCE
- Magnetocaloric materials and the optimization of cooling power density
- (2014) Patrick Wikus et al. CRYOGENICS
- Accelerated precipitation in the AFA stainless steel Fe–20Cr–30Ni–2Nb–5Al via cold working
- (2014) Geneva Trotter et al. INTERMETALLICS
- Phase equilibria and thermodynamic calculation of the Co–Ta binary system
- (2014) Kazuya Shinagawa et al. INTERMETALLICS
- An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser
- (2014) Gang Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Using metal hydride H 2 storage in mobile fuel cell equipment: Design and predicted performance of a metal hydride fuel cell mobile light
- (2014) C. Song et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Effect of Ni–Mo addition on cyclic and isothermal oxidation resistance and electrical behavior of ferritic stainless steel for SOFCs interconnect
- (2014) Azim Safikhani et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Enhanced high-rate discharge properties of La 11.3 Mg 6.0 Sm 7.4 Ni 61.0 Co 7.2 Al 7.1 with added graphene synthesized by plasma milling
- (2014) L.Z. Ouyang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X=V or Cr) refractory high-entropy alloys
- (2014) É. Fazakas et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Microstructure and Properties of Aluminum-Containing Refractory High-Entropy Alloys
- (2014) O. N. Senkov et al. JOM
- Influence of long heat treatments on the laves phase nucleation in a type 444 ferritic stainless steel
- (2014) T. Juuti et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The liquidus surface of the Cr–Al–Nb system and re-investigation of the Cr–Nb and Al–Cr phase diagrams
- (2014) F. Stein et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development and intrinsic properties of hexagonal ferromagnetic (Zr,Ti)Fe2
- (2014) W. Y. Zhang et al. JOURNAL OF APPLIED PHYSICS
- Proton irradiation effects on the precipitate in a Zr–1.6Sn–0.6Nb–0.2Fe–0.1Cr alloy
- (2014) H.H. Shen et al. JOURNAL OF NUCLEAR MATERIALS
- Stability of self-interstitial clusters with C15 Laves phase structure in iron
- (2014) L. Dézerald et al. JOURNAL OF NUCLEAR MATERIALS
- A New Theoretical Study of the Cr-Nb System
- (2014) Clemens Schmetterer et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Permanent magnetism of intermetallic compounds between light and heavy transition-metal elements
- (2014) P Kumar et al. JOURNAL OF PHYSICS-CONDENSED MATTER
- Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 °C
- (2014) L. Garcia-Fresnillo et al. JOURNAL OF POWER SOURCES
- Superconductivity in Noncentrosymmetric Iridium Silicide Li2IrSi3
- (2014) Sunseng Pyon et al. JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN
- Laves-phase in the China Low Activation Martensitic steel after long-term creep exposure
- (2014) Lixin Huang et al. MATERIALS & DESIGN
- High-temperature tensile and creep deformation of cross-weld specimens of weld joint between T92 martensitic and Super304H austenitic steels
- (2014) Myung-Yeon Kim et al. MATERIALS CHARACTERIZATION
- Precipitation behavior of Fe2Nb Laves phase on grain boundaries in austenitic heat resistant steels
- (2014) S.W. Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A few observations on Laves phase precipitation in relation to its effects on creep rupture strength of ferritic steels based on Fe–9Cr (wt%) alloys at 650 °C
- (2014) S. Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of the Laves Phase in Ferritic Heat-Resistant Steels During Long-term Annealing and its Influence on the High-Temperature Strength
- (2014) Nilofar Nabiran et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study of Microsegregation and Laves Phase in INCONEL718 Superalloy Regarding Cooling Rate During Solidification
- (2014) Lishibao Ling et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of Laves Phase-strengthened Fe-Cr-Zr Alloys
- (2014) L. Tan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Computational Design of W and Co-Containing Creep-Resistant Steels with Barely Coarsening Laves Phase and M23C6 as the Strengthening Precipitates
- (2014) Qi Lu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and mechanical properties of Cr–Ta–Si Laves phase-based alloys at elevated temperatures
- (2014) Ayan Bhowmik et al. PHILOSOPHICAL MAGAZINE
- Icosahedral superclusters inCu64Zr36metallic glass
- (2014) J. Zemp et al. PHYSICAL REVIEW B
- Effect of Nb addition on the structure and mechanical behaviors of CoCrCuFeNi high-entropy alloy coatings
- (2014) J.B. Cheng et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Grain Boundary Fe2Nb Laves Phase on Creep of Austenitic Heat Resistant Steel of Fe-20Cr-30Ni-2Nb in Steam Atmosphere
- (2014) Yu Misosaku et al. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
- In situ TEM investigation of amorphization and recrystallization of Zr(Fe,Cr,Nb)2 precipitates under Ne ion irradiation
- (2014) H.H. Shen et al. VACUUM
- Unexpected crystal and magnetic structures in MnCu4In and MnCu4Sn
- (2013) A. Provino et al. ACTA MATERIALIA
- Effect of lattice anharmonicity in the structural phase transformation of Laves phase HfV2 alloy: A first-principles investigation
- (2013) M. Krcmar et al. ACTA MATERIALIA
- Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
- (2013) F. Otto et al. ACTA MATERIALIA
- Progress in bulk MgCu2-type rare-earth iron magnetostrictive compounds
- (2013) Wei-Jun Ren et al. Chinese Physics B
- X-ray investigation of the Y–Zr–Ni system at 870 K
- (2013) V. Babizhetskyy et al. INTERMETALLICS
- Interphase precipitation of Fe2Hf Laves phase in a Fe–9Cr/Fe–9Cr–Hf diffusion couple
- (2013) Satoru Kobayashi et al. INTERMETALLICS
- Alloys based on Cr–Cr2Ta containing Si
- (2013) Ayan Bhowmik et al. INTERMETALLICS
- Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
- (2013) I. Kunce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrogen storage systems based on hydride–graphite composites: computer simulation and experimental validation
- (2013) Kai Herbrig et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructure and hydrogen storage properties of non-stoichiometric Zr–Ti–V Laves phase alloys
- (2013) Y.L. Zhang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Effects of PuNi3- and Ce2Ni7-type phase abundance on electrochemical characteristics of La–Mg–Ni-based alloys
- (2013) Junling Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental Investigation of Phase Equilibria in the Co-Cr-Nb System at 1000, 1100, and 1200 °C
- (2013) Xinqiao Zhang et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Large magnetovolume effects due to transition from the ferromagnetic to antiferromagnetic state in Hf0.825Ta0.175Fe2 intermetallic compound
- (2013) L V B Diop et al. JOURNAL OF PHYSICS-CONDENSED MATTER
- Effect of silicon on the fracture toughness and oxidation behavior of hot pressed NbCr2 alloys
- (2013) Shiqiang Lu et al. MATERIALS & DESIGN
- A new ferritic stainless steel with improved thermo-mechanical fatigue resistance for exhaust parts
- (2013) Laurent Faivre et al. MATERIALS AT HIGH TEMPERATURES
- Ab initio study of stacking faults and deformation mechanism in C15 Laves phases Cr2X (X = Nb, Zr, Hf)
- (2013) Li Ma et al. MATERIALS CHEMISTRY AND PHYSICS
- Enhancement of high temperature ductility of hot-pressed Cu–Cr–Nb alloy by hot rolling
- (2013) A.K. Shukla et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Creep rupture behavior of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92) ferritic steel weld joint
- (2013) T. Sakthivel et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of high chromium ferritic steels strengthened by intermetallic phases
- (2013) B. Kuhn et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of precipitation behavior on creep strength of 15%Cr ferritic steels at high temperature between 923 and 1023K
- (2013) M. Shibuya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure Development of Oxide Scale during Steam Oxidation of the Fe–20Cr–30Ni–2Nb (at%) Austenitic Steel at 1073 K
- (2013) Lyta et al. MATERIALS TRANSACTIONS
- Effect of Thermal Aging on Ductile-Brittle Transition Temperature of Modified 9Cr-1Mo Steel Evaluated with Reference Temperature Approach Under Dynamic Loading Condition
- (2013) S. Sathyanarayanan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Phase relations, crystal chemistry, and physical properties of MgZn2-type Laves phases in the Mn-Cu-Si and Mn-Ni-Si systems
- (2013) X. Yan et al. PHYSICAL REVIEW B
- Development of L12-ordered Ni3(Al,Ti)-strengthened alumina-forming austenitic stainless steel alloys
- (2013) Yukinori Yamamoto et al. SCRIPTA MATERIALIA
- The ternary germanides UMnGe and U2Mn3Ge
- (2013) Rolf-Dieter Hoffmann et al. SOLID STATE SCIENCES
- Microstructure and tribological properties of solution-treated Tribaloy alloy
- (2013) Kuan Jiang et al. WEAR
- Phase stability of the laves phase Cr2Nb in a two-phase Cr-Cr2Nb alloy
- (2013) Kewei Li et al. Acta Metallurgica Sinica-English Letters
- Low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system: Microstructure and phase analysis
- (2012) O.N. Senkov et al. ACTA MATERIALIA
- Studying Plasticity in Hard and Soft Nb-Co Intermetallics
- (2012) Sandra Korte et al. ADVANCED ENGINEERING MATERIALS
- The Magnetocaloric Effect and Magnetic Refrigeration Near Room Temperature: Materials and Models
- (2012) V. Franco et al. Annual Review of Materials Research
- Oxidation behavior of TiAl alloy for various times
- (2012) Yan Jun Xi et al. ANTI-CORROSION METHODS AND MATERIALS
- First-principles calculations and thermodynamic re-modeling of the Hf–W system
- (2012) Alyson C. Lieser et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Cd4Cu7As, The First Representative of a Fully Ordered, Orthorhombically Distorted MgCu2 Laves Phase
- (2012) Oliver Osters et al. INORGANIC CHEMISTRY
- Microstructural evolution and interfacial crystallography in Cr–Cr2Ta
- (2012) Ayan Bhowmik et al. INTERMETALLICS
- Interdiffusion and the phase boundary compositions in the Co–Ta system
- (2012) Varun A. Baheti et al. INTERMETALLICS
- The role of Laves phase on microstructure evolution and creep strength of novel 9%Cr heat resistant steels
- (2012) O. Prat et al. INTERMETALLICS
- Influence of precipitation on initial high-temperature oxidation of Ti–Nb stabilized ferritic stainless steel SOFC interconnect alloy
- (2012) H. Ali-Löytty et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructure characterization and mechanical properties of a Laves-phase alloy based on Cr2Nb
- (2012) Kewei Li et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Effect of Mo, Al and Si on the microstructure and mechanical properties of Cr–Cr 2 Ta based alloys
- (2012) Ayan Bhowmik et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Magnetostrictive–piezoelectric composite structures for energy harvesting
- (2012) Thomas Lafont et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Solid-state hydrogen storage in Hydralloy–graphite composites
- (2012) Carsten Pohlmann et al. JOURNAL OF POWER SOURCES
- Ca2Pd3Ge, a new fully ordered ternary Laves phase structure
- (2012) Isa Doverbratt et al. JOURNAL OF SOLID STATE CHEMISTRY
- Microstructures and mechanical properties of T92/Super304H dissimilar steel weld joints after high-temperature ageing
- (2012) Guohong Chen et al. MATERIALS & DESIGN
- Room and high temperature deformation behaviour of a forged Fe–15Al–5Nb alloy with a reinforcing dispersion of equiaxed Laves phase particles
- (2012) D.G. Morris et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of high-temperature exposure on the mechanical properties of 18Cr–8Ni–W–Nb–V–N stainless steel
- (2012) I. Nikulin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Evolution and Mechanical Properties of Short-Term Thermally Exposed 9/12Cr Heat-Resistant Steels
- (2012) Wei Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure Evolution in an Advanced 9 pct Cr Martensitic Steel during Creep at 923 K (650 °C)
- (2012) Irina Fedorova et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Precipitation and Hardening in Magnesium Alloys
- (2012) Jian-Feng Nie METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Reaction diffusion and interdiffusion in some binary metallic systems
- (2012) Helmut Mehrer et al. PHILOSOPHICAL MAGAZINE
- Irradiation-Induced Formation of Nanocrystallites withC15Laves Phase Structure in bcc Iron
- (2012) M.-C. Marinica et al. PHYSICAL REVIEW LETTERS
- Giant magnetostrictive materials
- (2012) JingHua Liu et al. Science China-Technological Sciences
- Plastic deformation of the C14 Laves phase (Fe,Ni)2Nb
- (2012) N. Takata et al. SCRIPTA MATERIALIA
- Toughening and dry sliding wear resistance of Co3Mo2Si alloys
- (2012) Y. Liu et al. WEAR
- Non-Stoichiometry and Calphad Modeling of Frank-Kasper Phases
- (2012) Jean-Marc Joubert et al. Applied Sciences-Basel
- Thermodynamic modeling of Laves phases in the Ta–V system: Reassessment using first-principles results
- (2011) J. Pavlů et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Numerical simulation of precipitate evolution in ferritic–martensitic power plant steels
- (2011) Srinivas Prasad B.S. et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Polytypic transformations of the HfCr2 Laves phase – Part II: Kinetics of the polymorphic C14 → C15 transformation
- (2011) J. Aufrecht et al. INTERMETALLICS
- Thermodynamic assessment of the Cr–Ti and first assessment of the Al–Cr–Ti systems
- (2011) Damian M. Cupid et al. INTERMETALLICS
- Microstructures and mechanical properties of Fe–Al–Ta alloys with strengthening Laves phase
- (2011) D.D. Risanti et al. INTERMETALLICS
- Polytypic transformations of the HfCr2 Laves phase – Part I: Structural evolution as a function of temperature, time and composition
- (2011) J. Aufrecht et al. INTERMETALLICS
- Thermodynamic properties of Laves phases in the Mg–Al–Ca system at finite temperature from first-principles
- (2011) Hui Zhang et al. INTERMETALLICS
- Refinement of second phase dispersions in iron aluminide intermetallics by high-temperature severe plastic deformation
- (2011) D.G. Morris et al. INTERMETALLICS
- A unified approach to phase and microstructural stability for Fe-ETM alloys through Miedema's model
- (2011) Sadhan Ghosh et al. INTERMETALLICS
- The effect of Zr addition on the structure and high temperature strength of Fe-30 at.% Al type alloys
- (2011) Petr Kratochvíl et al. INTERMETALLICS
- Studies of off-stoichiometric AB2 metal hydride alloy: Part 2. Hydrogen storage and electrochemical properties
- (2011) K. Young et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Creep fracture behavior of dissimilar weld joints between T92 martensitic and HR3C austenitic steels
- (2011) Jian Cao et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- The ternary Cr–Al–Nb phase diagram: Experimental investigations of isothermal sections at 1150, 1300 and 1450°C
- (2011) O. Prymak et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
- (2011) Sheng Guo et al. JOURNAL OF APPLIED PHYSICS
- Structural Stability of ABy Phases in the (La,Mg)–Ni System Obtained by Density Functional Theory Calculations
- (2011) J.-C. Crivello et al. Journal of Physical Chemistry C
- Effects of Nb and W additions on high-temperature creep properties of ferritic stainless steels for solid oxide fuel cell interconnect
- (2011) Yung-Tang Chiu et al. JOURNAL OF POWER SOURCES
- Effect of nickel and cobalt addition on the precipitation-strength of 15Cr ferritic steels
- (2011) M. Shibuya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Laves phase strengthening on the mechanical properties of high Cr ferritic steels for solid oxide fuel cell interconnect application
- (2011) B. Kuhn et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels
- (2011) Jian Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy
- (2011) O.N. Senkov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
- (2011) S.G. Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Structural changes of tempered martensitic 9%Cr–2%W–3%Co steel during creep at 650°C
- (2011) N. Dudova et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and solidification behaviour characterisation of phosphorus and boron doped IN718 superalloy
- (2011) Z J Miao et al. MATERIALS SCIENCE AND TECHNOLOGY
- Formation of laves phase in a refractory austenitic steel due to long-term heating
- (2011) L. V. Tarasenko et al. METAL SCIENCE AND HEAT TREATMENT
- Microstructure Evolution and Pinning of Boundaries by Precipitates in a 9 pct Cr Heat Resistant Steel During Creep
- (2011) Valeriy Dudko et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Orientation relationships between icosahedral clusters in hexagonal MgZn2 and monoclinic Mg4Zn7 phases in Mg-Zn(-Y) alloys
- (2011) Julian M. Rosalie et al. PHILOSOPHICAL MAGAZINE
- Theory of structural trends within4dand5dtransition metal topologically close-packed phases
- (2011) B. Seiser et al. PHYSICAL REVIEW B
- Undulating Slip in Laves Phase and Implications for Deformation in Brittle Materials
- (2011) Wei Zhang et al. PHYSICAL REVIEW LETTERS
- Laves phase hydrogen storage alloys for super-high-pressure metal hydride hydrogen compressors
- (2011) Xiumei Guo et al. RARE METALS
- Reply to comments on the absence of a stable hexagonal Laves phase modification (NbCr2) in the Nb–Cr system
- (2011) A. Leineweber et al. SCRIPTA MATERIALIA
- Tribaloy alloy reinforced tin–bronze composite coating for journal bearing applications
- (2011) F. Gao et al. THIN SOLID FILMS
- Space fullerenes: a computer search for new Frank–Kasper structures
- (2010) Mathieu Dutour Sikirić et al. ACTA CRYSTALLOGRAPHICA SECTION A
- Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: Experimental and DICTRA calculations
- (2010) O. Prat et al. ACTA MATERIALIA
- TCP phase predictions in Ni-based superalloys: Structure maps revisited
- (2010) B. Seiser et al. ACTA MATERIALIA
- Recent Developments Toward the Application of Iron Aluminides in Fossil Fuel Technologies
- (2010) David G. Morris et al. ADVANCED ENGINEERING MATERIALS
- Thermodynamic modeling of Laves phases in the Cr–Hf and Cr–Ti systems: Reassessment using first-principles results
- (2010) J. Pavlů et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects
- (2010) Marián Palcut et al. CORROSION SCIENCE
- Improvement of the oxidation resistance of Tribaloy T-800 alloy by the additions of yttrium and aluminium
- (2010) Y.-D. Zhang et al. CORROSION SCIENCE
- Creep rupture behaviour of P92 steel weldment
- (2010) Wang Xue et al. ENGINEERING FAILURE ANALYSIS
- Experimental determination of the ternary Co–Al–Nb phase diagram
- (2010) O. Dovbenko et al. INTERMETALLICS
- The kinetics of a polytypic Laves phase transformation in TiCr2
- (2010) Wolfgang Baumann et al. INTERMETALLICS
- Early work on Laves phases in East Germany
- (2010) P. Paufler INTERMETALLICS
- Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys
- (2010) Yih-Farn Kao et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Thermodynamic assessment of the Cr–Al–Nb system
- (2010) Cuiyun He et al. International Journal of Materials Research
- Creep strength of high chromium steel with ferrite matrix
- (2010) K. Kimura et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at 600 °C
- (2010) C.G. Panait et al. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Solid solubility by anti-site atoms in the C36-TiCr2 Laves phase revealed by single-crystal X-ray diffractometry
- (2010) Wolfgang Baumann et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The correlation of C14/C15 phase abundance and electrochemical properties in the AB2 alloys
- (2010) K. Young et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of the C14 Ti35.4V32.3Fe32.3 Laves phase on the hydrogenation properties of the body-centered cubic compound Ti24.5V59.3Fe16.2
- (2010) A. Guéguen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Transformation–dislocation dipoles in Laves phases: A high-resolution transmission electron microscopy analysis
- (2010) J. Aufrecht et al. JOURNAL OF MATERIALS RESEARCH
- Study of interdiffusion and growth of topologically closed packed phases in the Co–Nb system
- (2010) S. S. K. Balam et al. JOURNAL OF MATERIALS SCIENCE
- Development and characterization of advanced 9Cr ferritic/martensitic steels for fission and fusion reactors
- (2010) S. Saroja et al. JOURNAL OF NUCLEAR MATERIALS
- Hydrogen Storage in AB2 Laves Phase (A = Zr, Ti; B = Ni, Mn, Cr, V): Binding Energy and Electronic Structure
- (2010) S. B. Gesari et al. Journal of Physical Chemistry C
- Kinetic study on the coarsening behaviour of equilibrium phases in Nb alloyed ferritic stainless steels at 700°C
- (2010) Sadhan Ghosh MATERIALS CHEMISTRY AND PHYSICS
- A novel load-insensitive Co3Mo2Si reinforced in-situ metal-matrix composite coating for wear resistance application
- (2010) Y. Liu et al. MATERIALS LETTERS
- Laves phase embrittlement of the ferritic stainless steel type AISI 441
- (2010) M.P. Sello et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synthesis of defect-free single-phase bars of high-melting Laves phases through modified cold crucible levitation melting
- (2010) S. Voß et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels
- (2010) D. Rojas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation behavior of Laves phase in 10%Cr steel X12CrMoWVNbN10-1-1 during short-term creep exposure
- (2010) Huiran Cui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laves phase precipitation and its transformation kinetics in the ferritic stainless steel type AISI 441
- (2010) M.P. Sello et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution in a 3%Co modified P911 heat resistant steel under tempering and creep conditions
- (2010) A. Kipelova et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Growth Behavior and Interfacial Character of Ir3Y Precipitates in the Ir2Y Lave Phase Matrix
- (2010) N. Sekido et al. MATERIALS TRANSACTIONS
- Effect of Si on Precipitation Behavior of Nb-Laves Phase and Amount of Nb in Solid Solution at Elevated Temperature in High Purity 17%Cr-0.5%Nb Steels
- (2010) Yasushi Kato et al. MATERIALS TRANSACTIONS
- Overview of Strategies for High-Temperature Creep and Oxidation Resistance of Alumina-Forming Austenitic Stainless Steels
- (2010) Y. Yamamoto et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Layer-stacking irregularities in C36-type Nb–Cr and Ti–Cr Laves phases and their relation with polytypic phase transformations
- (2010) J. Aufrecht et al. PHILOSOPHICAL MAGAZINE
- Structural relationships among MgZn2and Mg4Zn7phases and transition structures in Mg-Zn-Y alloys
- (2010) Julian M. Rosalie et al. PHILOSOPHICAL MAGAZINE
- Electronic and structural properties of Laves-phaseMgZn2of varying chemical disorder
- (2010) M. Andersson et al. PHYSICAL REVIEW B
- Oxygen/noble gas binary phase diagrams at 296 K and high pressures
- (2010) Gunnar Weck et al. PHYSICAL REVIEW B
- The influence of plastic deformation on polytypic phase transformations in TiCr2 Laves phases
- (2010) Wolfgang Baumann et al. SCRIPTA MATERIALIA
- Microstructure and wear property of laser-clad Co3Mo2Si/Coss wear resistant coatings
- (2010) Y. Liu et al. SURFACE & COATINGS TECHNOLOGY
- On the effect of long-term creep on the microstructure of a 12% chromium tempered martensite ferritic steel
- (2009) A. Aghajani et al. ACTA MATERIALIA
- Conversion of MX nitrides to Z-phase in a martensitic 12% Cr steel
- (2009) Leonardo Cipolla et al. ACTA MATERIALIA
- Chemical and Physical Solutions for Hydrogen Storage
- (2009) Ulrich Eberle et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Creep deformation and failure of E911/E911 and P92/P92 similar weld-joints
- (2009) L. Falat et al. ENGINEERING FAILURE ANALYSIS
- Synthesis, Structure, and Bonding in K12Au21Sn4. A Polar Intermetallic Compound with Dense Au20and Open AuSn4Layers
- (2009) Bin Li et al. INORGANIC CHEMISTRY
- Gold Tetrahedra as Building Blocks in K3Au5Tr (Tr = In, Tl) and Rb2Au3Tl and in Other Compounds: A Broad Group of Electron-Poor Intermetallic Phases
- (2009) Bin Li et al. INORGANIC CHEMISTRY
- Critical assessment and thermodynamic modeling of the binary Mg–Zn, Ca–Zn and ternary Mg–Ca–Zn systems
- (2009) S. Wasiur-Rahman et al. INTERMETALLICS
- A new metastable crystalline phase in the Cr–Zr system
- (2009) J. Bodega et al. INTERMETALLICS
- Hydrogenation of C14 Laves phase alloy: CaLi2
- (2009) X LIU et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Fe–Al materials for structural applications at high temperatures: Current research at MPIE
- (2009) Martin Palm International Journal of Materials Research
- Stability of LS and LS[sub 2] crystal structures in binary mixtures of hard and charged spheres
- (2009) A.-P. Hynninen et al. JOURNAL OF CHEMICAL PHYSICS
- Exploration of alloy 441 chemistry for solid oxide fuel cell interconnect application
- (2009) Paul D. Jablonski et al. JOURNAL OF POWER SOURCES
- Barium aluminides
- (2009) Michael Jehle et al. JOURNAL OF SOLID STATE CHEMISTRY
- Aging effects on the mechanical properties of alumina-forming austenitic stainless steels
- (2009) H. Bei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Alloying Additions on Phase Equilibria and Creep Resistance of Alumina-Forming Austenitic Stainless Steels
- (2009) Y. Yamamoto et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Comparing photonic band structure calculation methods for diamond and pyrochlore crystals
- (2009) E. C. Vermolen et al. OPTICS EXPRESS
- Composition, Microstructure, and Water Vapor Effects on Internal/External Oxidation of Alumina-Forming Austenitic Stainless Steels
- (2009) M. P. Brady et al. OXIDATION OF METALS
- High-pressure phases, vibrational properties, and electronic structure ofNe(He)2andAr(He)2: A first-principles study
- (2009) C. Cazorla et al. PHYSICAL REVIEW B
- Prediction of binary hard-sphere crystal structures
- (2009) Laura Filion et al. PHYSICAL REVIEW E
- The fracture toughness of hot-pressed NbCr2 alloys doped by rare earth yttrium
- (2009) S.Q. Lu et al. SCRIPTA MATERIALIA
- On the formation and growth of Mo-rich Laves phase particles during long-term creep of a 12% chromium tempered martensite ferritic steel
- (2009) A. Aghajani et al. SCRIPTA MATERIALIA
- The absence of a stable hexagonal Laves phase modification (NbCr2) in the Nb–Cr system
- (2009) J. Aufrecht et al. SCRIPTA MATERIALIA
- Site Occupation Reversal in the C14 Laves Phase Nb(Cr1-xCox)2
- (2009) Alexander Kerkau et al. ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
- Thermodynamic modeling of the Mg–Al–Ca system
- (2008) A JANZ et al. ACTA MATERIALIA
- The ternary Laves phase Nb(Ni1−xAlx)2 with MgZn2 -type
- (2008) Xinlin Yan et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Re-modeling of Laves phases in the Cr–Nb and Cr–Ta systems using first-principles results
- (2008) J. Pavlů et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Microstructure and mechanical properties of directionally solidified Fe–Al–Nb eutectic
- (2008) Srdjan Milenkovic et al. INTERMETALLICS
- A comparative study on the hydriding kinetics of Zr-based AB2 hydrogen storage alloys
- (2008) Xiao-Yang Cui et al. INTERMETALLICS
- Experimental reinvestigation of the Co–Nb phase diagram
- (2008) F. Stein et al. INTERMETALLICS
- Alloying effects on creep and oxidation resistance of austenitic stainless steel alloys employing intermetallic precipitates
- (2008) Y. Yamamoto et al. INTERMETALLICS
- Improvement of mechanical properties of Inconel 718 electron beam welds—influence of welding techniques and postweld heat treatment
- (2008) G. Madhusudhana Reddy et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improvement of hydrogen storage properties of the AB2 Laves phase alloys for automotive application
- (2008) M KANDAVEL et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The development of alumina-forming austenitic stainless steels for high-temperature structural use
- (2008) M. P. Brady et al. JOM
- Effect of vanadium substitution in C14 Laves phase alloys for NiMH battery application
- (2008) K. Young et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of processing on the microstructure of Cu–8Cr–4Nb
- (2008) L. G. Vettraino et al. JOURNAL OF MATERIALS SCIENCE
- Microstructural stability of modified 9Cr–1Mo steel during long term exposures at elevated temperatures
- (2008) V. Thomas Paul et al. JOURNAL OF NUCLEAR MATERIALS
- Investigation of iron–chromium–niobium–titanium ferritic stainless steel for solid oxide fuel cell interconnect applications
- (2008) Zhenguo Yang et al. JOURNAL OF POWER SOURCES
- High-pressure modifications of CaZn2, SrZn2, SrAl2, and BaAl2: Implications for Laves phase structural trends
- (2008) Subhadeep Kal et al. JOURNAL OF SOLID STATE CHEMISTRY
- Tensile Strength of Ni45Al45Cr7.5Ta2.5-Coated Sapphire Fibers
- (2008) David E. Hajas et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetallic alloys
- (2008) Lixin Dong et al. MATERIALS CHARACTERIZATION
- Improved mechanical and tribological properties of tin–bronze journal bearing materials with newly developed tribaloy alloy additive
- (2008) A. Tavakoli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A study on Z-phase nucleation in martensitic chromium steels
- (2008) Ardeshir Golpayegani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication and toughening of NbCr2 matrix composites alloyed with Ni obtained by powder metallurgy
- (2008) Xiao-wu Nie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the nucleation and dissolution process of Z-phase Cr(V,Nb)N in martensitic 12%Cr steels
- (2008) Hilmar Kjartansson Danielsen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation Strengthening of a Mg-Al-Ca–Based AXJ530 Die-cast Alloy
- (2008) A. Suzuki et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Oxidation Behavior of Tribaloy T-800 Alloy at 800 and 1,000 °C
- (2008) Y.-D. Zhang et al. OXIDATION OF METALS
- Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants
- (2008) Fujio Abe SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Evidence of uranium magnetic ordering on U2Fe3Ge
- (2008) M.S. Henriques et al. SOLID STATE COMMUNICATIONS
- Novel polytetrafluoroethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings
- (2008) Alireza Khoddamzadeh et al. WEAR
- Microstructure and long-term creep properties of 9–12% Cr steels
- (2007) J. Hald INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
- Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy
- (2007) L.X. Dong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evaluation of Laves-phase forming Fe–Cr alloy for SOFC interconnects in reducing atmosphere
- (2007) Teruhisa Horita et al. JOURNAL OF POWER SOURCES
- Development of high strength ferritic steel for interconnect application in SOFCs
- (2007) J. Froitzheim et al. JOURNAL OF POWER SOURCES
- Design and application of magnetostrictive materials
- (2007) A.G. Olabi et al. MATERIALS & DESIGN
- Precipitation of Laves phase in a 28%Cr–4%Ni–2%Mo–Nb superferritic stainless steel
- (2007) Thiago Fontoura de Andrade et al. MATERIALS CHARACTERIZATION
- Martensitic–austenitic 9–12% Cr steels—Alloy design, microstructural stability and mechanical properties
- (2007) Ulrich E. Klotz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of quasicrystal and Laves phases on strength and ductility of as-extruded and heat treated Mg–Zn–Gd-based alloys
- (2007) Guangyin Yuan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase evolution in P92 and E911 weld metals during ageing
- (2007) A. Výrostková et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design of martensitic/ferritic heat-resistant steels for application at 650°C with supporting thermodynamic modelling
- (2007) V. Knežević et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characteristics of Tribaloy T-800 and T-900 coatings on steel substrates by laser cladding
- (2007) M.J. Tobar et al. SURFACE & COATINGS TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started