标题
Design and Tailoring of Alloys for Additive Manufacturing
作者
关键词
-
出版物
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2020-10-16
DOI
10.1007/s11661-020-06009-3
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- In-Situ High-Energy X-ray Diffraction During a Linear Deposition of 308 Stainless Steel via Wire Arc Additive Manufacture
- (2020) D. W. Brown et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing
- (2020) Vivek Thampy et al. Scientific Reports
- Study of the Environmental Implications of Using Metal Powder in Additive Manufacturing and Its Handling
- (2020) Jon Iñaki Arrizubieta et al. Metals
- Correlations of cracking with scan strategy and build geometry in electron beam powder bed additive manufacturing
- (2020) Y.S. Lee et al. Additive Manufacturing
- Accelerated discovery of oxidation resistant CoNi-base γ/γ’ alloys with high L12 solvus and low density
- (2020) Colin A. Stewart et al. MATERIALS & DESIGN
- In-situ synthesis of oxides by reactive process atmospheres during L-PBF of stainless steel
- (2020) M.P. Haines et al. Additive Manufacturing
- Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing
- (2020) A. Plotkowski et al. ACTA MATERIALIA
- A defect-resistant Co–Ni superalloy for 3D printing
- (2020) Sean P. Murray et al. Nature Communications
- Defect Characterization Through Automated Laser Track Trace Identification in SLM Processes Using Laser Profilometer Data
- (2019) Brandon Baucher et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
- (2019) Sarah J. Wolff et al. Scientific Reports
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Investigation on solid-state phase transformation in a Ti-47Al-2Cr-2V alloy due to thermal cycling during laser additive manufacturing process
- (2019) Yu Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The evolving landscape for alloy design
- (2019) Tresa M. Pollock et al. MRS BULLETIN
- Dynamics of pore formation during laser powder bed fusion additive manufacturing
- (2019) Aiden A. Martin et al. Nature Communications
- Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
- (2019) Andrew M. Kiss et al. ADVANCED ENGINEERING MATERIALS
- Advanced Manufacturing for Nuclear Energy
- (2019) Xiaoyuan Lou et al. JOM
- Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response
- (2019) Rongpei Shi et al. JOM
- Selective laser melting of Ti–35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
- (2019) J.C. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Pore elimination mechanisms during 3D printing of metals
- (2019) S. Mohammad H. Hojjatzadeh et al. Nature Communications
- Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
- (2019) Nadia Kouraytem et al. Physical Review Applied
- Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy
- (2019) John H. Boswell et al. MATERIALS & DESIGN
- Oxidation Behavior Across Composition Space Relevant to Co-based γ/γ′ Alloys
- (2019) Colin A. Stewart et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Modeling and simulation of weld solidification cracking part III
- (2019) J. Draxler et al. Welding in the World
- Review: Materials Ecosystem for Additive Manufacturing Powder Bed Fusion Processes
- (2019) Behrang Poorganji et al. JOM
- Control of Thermally Stable Core-Shell Nano-Precipitates in Additively Manufactured Al-Sc-Zr Alloys
- (2019) Philipp Kürnsteiner et al. Additive Manufacturing
- Phase field modeling of rapid resolidification of Al-Cu thin films
- (2019) Tatu Pinomaa et al. JOURNAL OF CRYSTAL GROWTH
- Designer alloy enables 3D printing of fine-grained metals
- (2019) Amy J. Clarke NATURE
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- Investigating the effect of metal powder recycling in Electron beam Powder Bed Fusion using process log data
- (2019) Sujana Chandrasekar et al. Additive Manufacturing
- First-Principles Statistical Mechanics of Multicomponent Crystals
- (2018) A. Van der Ven et al. Annual Review of Materials Research
- Feedstock powder processing research needs for additive manufacturing development
- (2018) Iver E. Anderson et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
- (2018) Andrew T. Polonsky et al. MATERIALS CHARACTERIZATION
- The β phase evolution in Ti-6Al-4V additively manufactured by laser metal deposition due to cyclic phase transformations
- (2018) H.Z. Zhong et al. MATERIALS LETTERS
- Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
- (2018) S. S. Babu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Refining As-cast β-Ti Grains Through ZrN Inoculation
- (2018) Dong Qiu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing
- (2018) Ercan Cakmak et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Elastic Properties of Novel Co- and CoNi-Based Superalloys Determined through Bayesian Inference and Resonant Ultrasound Spectroscopy
- (2018) Brent R. Goodlet et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Two Steady-State Creep Stages in Co-Al-W-Base Single-Crystal Superalloys at 1273 K/137 MPa
- (2018) Song Lu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
- (2018) Y. S. Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive Manufacturing of Powdery Ni-Based Superalloys Mar-M-247 and CM 247 LC in Hybrid Laser Metal Deposition
- (2018) André Seidel et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
- (2018) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Rapid Assessment of Oxidation Behavior in Co-Based γ/γ′ Alloys
- (2018) Colin A. Stewart et al. OXIDATION OF METALS
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
- (2018) Nicholas P. Calta et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Shearing of γ’ particles in Co-base and Co-Ni-base superalloys
- (2018) L. Feng et al. ACTA MATERIALIA
- A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing
- (2018) M. Haines et al. COMPUTATIONAL MATERIALS SCIENCE
- Application of chord length distributions and principal component analysis for quantification and representation of diverse polycrystalline microstructures
- (2018) Marat I. Latypov et al. MATERIALS CHARACTERIZATION
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
- (2018) S. J. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
- (2018) Curtis Lee Frederick et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions
- (2018) D. Carluccio et al. Journal of Manufacturing Processes
- Ultrafast X-ray imaging of laser–metal additive manufacturing processes
- (2018) Niranjan D. Parab et al. JOURNAL OF SYNCHROTRON RADIATION
- X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
- (2018) Anton du Plessis et al. 3D Printing and Additive Manufacturing
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications
- (2017) Karel Kellens et al. JOURNAL OF INDUSTRIAL ECOLOGY
- From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
- (2017) D. Tourret et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Matching time and spatial scales of rapid solidification: dynamic TEM experiments coupled to CALPHAD-informed phase-field simulations
- (2017) Aurelien Perron et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Building digital twins of 3D printing machines
- (2017) T. DebRoy et al. SCRIPTA MATERIALIA
- Uncertainty quantification in prediction of material properties during additive manufacturing
- (2017) Zhen Hu et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
- (2017) J. Raplee et al. Scientific Reports
- Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
- (2017) Cang Zhao et al. Scientific Reports
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
- (2016) Narendran Raghavan et al. ACTA MATERIALIA
- Multiscale Modeling of Powder Bed–Based Additive Manufacturing
- (2016) Matthias Markl et al. Annual Review of Materials Research
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V
- (2016) Niyanth Sridharan et al. JOM
- Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing
- (2016) Joseph T. McKeown et al. JOM
- Five-Axis Ultrasonic Additive Manufacturing for Nuclear Component Manufacture
- (2016) Adam Hehr et al. JOM
- Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
- (2016) M. M. Kirka et al. JOM
- Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy
- (2016) K. Zweiacker et al. JOURNAL OF APPLIED PHYSICS
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Metallic materials for 3D printing
- (2016) Suman Das et al. MRS BULLETIN
- Master alloys in powder metallurgy: the challenge of exploring new alloying compositions
- (2016) Raquel de Oro Calderon et al. POWDER METALLURGY
- Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions
- (2016) C. Kenel et al. SCRIPTA MATERIALIA
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Creep-induced planar defects in L1 2 -containing Co- and CoNi-base single-crystal superalloys
- (2015) Michael S. Titus et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- L12-Strengthened Cobalt-Base Superalloys
- (2015) Akane Suzuki et al. Annual Review of Materials Research
- Wire-feed additive manufacturing of metal components: technologies, developments and future interests
- (2015) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Three-Dimensional Multiscale Modeling of Dendritic Spacing Selection During Al-Si Directional Solidification
- (2015) Damien Tourret et al. JOM
- Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
- (2015) Chunze Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- The TriBeam system: Femtosecond laser ablation in situ SEM
- (2015) McLean P. Echlin et al. MATERIALS CHARACTERIZATION
- Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen
- (2015) Ercan Cakmak et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
- (2015) L. M. Sochalski-Kolbus et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Movie-mode dynamic electron microscopy
- (2015) Thomas LaGrange et al. MRS BULLETIN
- Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance
- (2015) S. Neumeier et al. SCRIPTA MATERIALIA
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain
- (2015) Jason Dawes et al. Johnson Matthey Technology Review
- In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting
- (2014) Yolanda S. Hedberg et al. DENTAL MATERIALS
- A global sustainability perspective on 3D printing technologies
- (2014) Malte Gebler et al. ENERGY POLICY
- Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
- (2014) Chandrika Kamath et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Experimental Investigation and Thermodynamic Modeling of the Co-Rich Region in the Co-Al-Ni-W Quaternary System
- (2014) J. Zhu et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder
- (2014) Yali Li et al. MATERIALS & DESIGN
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
- (2014) Yousub Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- In situ transmission electron microscopy of crystal growth-mode transitions during rapid solidification of a hypoeutectic Al–Cu alloy
- (2013) Joseph T. McKeown et al. ACTA MATERIALIA
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Highly Anisotropic Steel Processed by Selective Laser Melting
- (2013) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
- (2013) Diego Manfredi et al. Materials
- Key computational modeling issues in Integrated Computational Materials Engineering
- (2012) Jitesh H. Panchal et al. COMPUTER-AIDED DESIGN
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Approaches for ultrafast imaging of transient materials processes in the transmission electron microscope
- (2012) Thomas LaGrange et al. MICRON
- High temperature oxidation of γ/γ′-strengthened Co-base superalloys
- (2011) L. Klein et al. CORROSION SCIENCE
- Single-crystal solidification of new Co–Al–W-base alloys
- (2011) Masafumi Tsunekane et al. INTERMETALLICS
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Hydrocarbon–metal reactions during metal arc welding under oil (MAW-UO)
- (2011) H Almostaneer et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- New Co-based γ-γ′ high-temperature alloys
- (2010) T. M. Pollock et al. JOM
- Thermodynamic and kinetic models for describing microstructure evolution during joining of metals and alloys
- (2009) S S Babu INTERNATIONAL MATERIALS REVIEWS
- From Powders to Thermally Sprayed Coatings
- (2009) Pierre Fauchais et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now