Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
出版年份 2019 全文链接
标题
Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
作者
关键词
-
出版物
Materials
Volume 12, Issue 10, Pages 1664
出版商
MDPI AG
发表日期
2019-05-23
DOI
10.3390/ma12101664
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- In-process thermal treatment of polylactic acid in fused deposition modelling
- (2019) Muhammad Harris et al. MATERIALS AND MANUFACTURING PROCESSES
- Enhanced through-plane thermal conductivity of polyamide 6 composites with vertical alignment of boron nitride achieved by fused deposition modeling
- (2019) Yi Geng et al. POLYMER COMPOSITES
- Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance
- (2019) Hao Liu et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Machines as Craftsmen: Localized Parameter Setting Optimization for Fused Filament Fabrication 3D Printing
- (2019) John M. Gardner et al. Advanced Materials Technologies
- Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure
- (2019) Ana Valerga et al. Polymers
- 3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties
- (2019) Shib Banerjee et al. Polymers
- Medical-Grade PCL Based Polyurethane System for FDM 3D Printing—Characterization and Fabrication
- (2019) Agnieszka Haryńska et al. Materials
- Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
- (2019) Enrique Cuan-Urquizo et al. Materials
- Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing
- (2019) Damien Rasselet et al. Materials
- Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials
- (2019) Nadir Ayrilmis et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Crazing in additively manufactured acrylonitrile butadiene styrene
- (2019) Kaitlynn M. Conway et al. ENGINEERING FRACTURE MECHANICS
- Research progress of ceramic matrix composite parts based on additive manufacturing technology
- (2019) Zhongliang Lu et al. Virtual and Physical Prototyping
- Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
- (2018) David Stoof et al. COMPOSITES PART B-ENGINEERING
- Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling
- (2018) Wei Zhang et al. COMPOSITES PART B-ENGINEERING
- Additive layer manufacturing of poly (ether ether ketone) via FDM
- (2018) Marianna Rinaldi et al. COMPOSITES PART B-ENGINEERING
- Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding
- (2018) Hongjie Bi et al. INDUSTRIAL CROPS AND PRODUCTS
- Design and development of an extrusion system for 3D printing biopolymer pellets
- (2018) Sean Whyman et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods
- (2018) Kuldeep Agarwal et al. JOURNAL OF COMPOSITE MATERIALS
- Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
- (2018) Cagri Oztan et al. JOURNAL OF COMPOSITE MATERIALS
- Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites
- (2018) Easir Arafat Papon et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing
- (2018) Radoslaw A. Wach et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
- (2018) Neiko P. Levenhagen et al. POLYMER
- Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament
- (2018) Bai Huang et al. POLYMER ENGINEERING AND SCIENCE
- Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
- (2018) M.A. Caminero et al. POLYMER TESTING
- Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
- (2018) Wenfeng Hao et al. POLYMER TESTING
- Adhesion of 3D printed material on textile substrates
- (2018) Nils Grimmelsmann et al. RAPID PROTOTYPING JOURNAL
- Exposures during industrial 3-D printing and post-processing tasks
- (2018) Sonette Du Preez et al. RAPID PROTOTYPING JOURNAL
- Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
- (2018) Xiaohu Deng et al. Materials
- Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications
- (2018) Feng Zhao et al. Materials
- Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites
- (2018) et al. Materials
- A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
- (2018) Bilal Khatri et al. Materials
- Performance of biocompatible PEEK processed by fused deposition additive manufacturing
- (2018) M.F. Arif et al. MATERIALS & DESIGN
- Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
- (2018) Guangxin Liao et al. MATERIALS & DESIGN
- A study of creep in polycarbonate fused deposition modelling parts
- (2018) Antonio G. Salazar-Martín et al. MATERIALS & DESIGN
- Modelling, and characterization of 3D printed cellular structures
- (2018) Michał Kucewicz et al. MATERIALS & DESIGN
- Flexural fatigue properties of polycarbonate fused-deposition modelling specimens
- (2018) Josep M. Puigoriol-Forcada et al. MATERIALS & DESIGN
- Screw extrusion-based additive manufacturing of PEEK
- (2018) Jian-Wei Tseng et al. MATERIALS & DESIGN
- Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling
- (2018) Q. Tarrés et al. COMPOSITES PART B-ENGINEERING
- Investigation of ABS-rice straw composite feedstock filament for FDM
- (2018) Mohammed Ali Osman et al. RAPID PROTOTYPING JOURNAL
- Influence of PLA Filament Conditions on Characteristics of FDM Parts
- (2018) Ana Valerga et al. Materials
- Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review
- (2018) Daniela Pranzo et al. Micromachines
- The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)
- (2018) Narendra Kumar et al. Journal of Manufacturing Processes
- Polyurethanes as a Potential Medical-Grade Filament for Use in Fused Deposition Modeling 3D Printers – a Brief Review
- (2018) Agnieszka Przybytek et al. FIBRES & TEXTILES IN EASTERN EUROPE
- Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
- (2018) Behnam Akhoundi et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications
- (2018) Amarveer Singh Mangat et al. RAPID PROTOTYPING JOURNAL
- Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces
- (2018) Fulvio Lavecchia et al. Advances in Materials Science and Engineering
- Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
- (2018) Peng Geng et al. Journal of Manufacturing Processes
- Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament
- (2018) Gholamhossein Sodeifian et al. Results in Physics
- Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
- (2017) Wiebke Kempin et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of oral drugs: a new reality or hype?
- (2017) Wen-Kai Hsiao et al. Expert Opinion on Drug Delivery
- Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process
- (2017) Amirali Lalehpour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
- (2017) Neiko P. Levenhagen et al. POLYMER
- Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
- (2017) Lu Wang et al. POLYMER
- Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
- (2017) Lu Wang et al. POLYMER
- Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
- (2017) Jintian Wu et al. POLYMER COMPOSITES
- Characterisation, biodegradability and application of palm fibre-reinforced polyhydroxyalkanoate composites
- (2017) Chin-San Wu et al. POLYMER DEGRADATION AND STABILITY
- Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties
- (2017) Lu Wang et al. POLYMER ENGINEERING AND SCIENCE
- Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling
- (2017) Jin Zhu et al. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
- Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
- (2017) Jasgurpreet Singh Chohan et al. RAPID PROTOTYPING JOURNAL
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- (2017) Chuncheng Yang et al. RAPID PROTOTYPING JOURNAL
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Thin-walled high temperature alloy structures fabricated from additively manufactured polymer templates
- (2017) John H. Martin et al. MATERIALS & DESIGN
- Measurements of the mechanical response of unidirectional 3D-printed PLA
- (2017) Y. Song et al. MATERIALS & DESIGN
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
- (2017) J.M. Chacón et al. MATERIALS & DESIGN
- A critical review of the use of 3-D printing in the construction industry
- (2016) Peng Wu et al. AUTOMATION IN CONSTRUCTION
- Fused deposition modelling with ABS–graphene nanocomposites
- (2016) Sithiprumnea Dul et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications
- (2016) Chao-Chung Kuo et al. COMPOSITES PART B-ENGINEERING
- Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures
- (2016) Rupinder Singh et al. COMPOSITES PART B-ENGINEERING
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Retrofitment, open-sourcing, and characterisation of a legacy fused deposition modelling system
- (2016) Arno Ferreira et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Robot-assisted 3D printing of biopolymer thin shells
- (2016) Byron James Brooks et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
- (2016) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D scanning and printing skeletal tissues for anatomy education
- (2016) Daniel B. Thomas et al. JOURNAL OF ANATOMY
- Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
- (2016) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
- (2016) Paolo Bettini et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
- (2016) Nanya Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modulation, functionality, and cytocompatibility of three-dimensional printing materials made from chitosan-based polysaccharide composites
- (2016) Chin-San Wu Materials Science & Engineering C-Materials for Biological Applications
- Experimental investigations for development of Nylon6-Al-Al2O3 alternative FDM filament
- (2016) Kamaljit Singh Boparai et al. RAPID PROTOTYPING JOURNAL
- Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
- (2016) Caterina Casavola et al. MATERIALS & DESIGN
- Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
- (2016) Zixiang Weng et al. MATERIALS & DESIGN
- A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
- (2016) Jianlei Wang et al. MATERIALS & DESIGN
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionality
- (2016) A. Le Duigou et al. MATERIALS & DESIGN
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness
- (2015) Steffen Reichert et al. COMPUTER-AIDED DESIGN
- Hygromorphic materials for sustainable responsive architecture
- (2015) Artem Holstov et al. CONSTRUCTION AND BUILDING MATERIALS
- Tissue vascularization through 3D printing: Will technology bring us flow?
- (2015) S.J. Paulsen et al. DEVELOPMENTAL DYNAMICS
- Structure–mechanical property relationship in fused deposition modelling
- (2015) H. Rezayat et al. MATERIALS SCIENCE AND TECHNOLOGY
- The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
- (2015) Antonio Lanzotti et al. RAPID PROTOTYPING JOURNAL
- Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
- (2015) Wenzheng Wu et al. Materials
- Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
- (2015) Miquel Domingo-Espin et al. MATERIALS & DESIGN
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Bioprinting and Tissue Engineering: Recent Advances and Future Perspectives
- (2015) Dror Seliktar et al. ISRAEL JOURNAL OF CHEMISTRY
- Bio-Inspired Wooden Actuators for Large Scale Applications
- (2015) Markus Rüggeberg et al. PLoS One
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
- (2014) Carmen R. Rocha et al. JOURNAL OF MATERIALS RESEARCH
- The importance of carbon fiber to polymer additive manufacturing
- (2014) Lonnie J. Love et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
- (2014) B.M. Tymrak et al. MATERIALS & DESIGN
- PLA/chitosan/keratin composites for biomedical applications
- (2014) Constantin Edi Tanase et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- On reducing anisotropy in 3D printed polymers via ionizing radiation
- (2014) Steven Shaffer et al. POLYMER
- Mechanical properties of commercial rapid prototyping materials
- (2014) Jaroslaw Kotlinski RAPID PROTOTYPING JOURNAL
- Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
- (2014) Nevin Hill et al. RAPID PROTOTYPING JOURNAL
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- Metallization on FDM Parts Using the Chemical Deposition Technique
- (2014) Azhar Equbal et al. Coatings
- Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites
- (2013) Nevin Gamze Karsli et al. COMPOSITES PART B-ENGINEERING
- Effects of extreme surface roughness on 3D printed horn antenna
- (2013) C.R. Garcia et al. ELECTRONICS LETTERS
- The Roles of Traditional Chinese Medicine: Shen-Fu Injection on the Postresuscitation Care Bundle
- (2013) Qian Zhang et al. Evidence-based Complementary and Alternative Medicine
- Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
- (2013) Eric J. McCullough et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties
- (2013) E.O. Olakanmi JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- 3D printing of multifunctional nanocomposites
- (2013) Thomas A. Campbell et al. Nano Today
- Structural characteristics of fused deposition modeling polycarbonate material
- (2013) Walter Castro Smith et al. POLYMER TESTING
- 3D roughness profile model in fused deposition modelling
- (2013) Alberto Boschetto et al. RAPID PROTOTYPING JOURNAL
- Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
- (2012) Tao Xu et al. BIOMATERIALS
- Influence of thermal history on the mechanical properties of carbon fiber–acrylate composites cured by electron beam and thermal processes
- (2012) F. Vautard et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
- (2012) M.M. Kabir et al. COMPOSITES PART B-ENGINEERING
- A review on the degradability of polymeric composites based on natural fibres
- (2012) Z.N. Azwa et al. MATERIALS & DESIGN
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing: rapid prototyping comes of age
- (2012) Ian Campbell et al. RAPID PROTOTYPING JOURNAL
- The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites
- (2010) J. Li et al. CURRENT APPLIED PHYSICS
- Effects of layer thickness and binder saturation level parameters on 3D printing process
- (2010) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer
- (2010) V. Vega et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites
- (2008) J. Li APPLIED SURFACE SCIENCE
- Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites
- (2008) F. Rezaei et al. MATERIALS & DESIGN
- Fused deposition modelling of an auricle framework for microtia reconstruction based on CT images
- (2008) Wen Zeng et al. RAPID PROTOTYPING JOURNAL
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started