The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites

In this study acrylonitrile-butadiene-styrene (ABS) terpolymer was reinforced with HNO(3)-treated short carbon fibers (HCFs). The effects of HCF concentration on the tensile properties of the composites were examined. Increasing the HCF concentration in the ABS matrix from 10 wt% to 30 wt% resulted in improved tensile strength and tensile modulus. To obtain a strong interaction at the interface, polyamide-6 (PA6) at varying concentrations was introduced into the ABS/10 wt% HCF composite. The incorporation and increasing amount of PA6 in the composites increased tensile properties of the ABS/PA6/HCF systems due to the improved adhesion at the interface, which was confirmed by the ratio of tensile strength as an adhesion parameter. These results were also supported by scanning electron micrographs of the ABS/PA6/HCF composites, which exhibited an improved adhesion between the HCFs and the ABS/PA6 matrix. (C) 2010 Elsevier B.V. All rights reserved.