The morphological, mechanical, rheological, and thermal properties of PLA/PBAT blown films with chain extender

Perspectives on the production, structural characteristics and potential applications of bioplastics derived from polyhydroxyalkanoates

(2018) Priscilla B.S. Albuquerque et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Development of active films poly (butylene adipate co-terephthalate) – PBAT incorporated with oregano essential oil and application in fish fillet preservation

(2017) Lucas Guimarães Cardoso et al.   INDUSTRIAL CROPS AND PRODUCTS

Effects of the chain-extender content on the structure and performance of poly(lactic acid)-poly(butylene succinate)-microcrystalline cellulose composites

(2017) Zheng Cao et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Strengthened corrosion control of poly (lactic acid) (PLA) and poly (ε-caprolactone) (PCL) polymer-coated magnesium by imbedded hydrophobic stearic acid (SA) thin layer

(2016) Wentai Zhang et al.   CORROSION SCIENCE

The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on morphology, rheology and mechanical properties

(2016) Ebrahim Jalali Dil et al.   EUROPEAN POLYMER JOURNAL

Mechanical properties, hydrophobic properties and thermal stability of the biodegradable poly(butylene adipate-co-terephthalate)/maleated thermoplastic starch blown films

(2016) Hongwei Pan et al.   FIBERS AND POLYMERS

Production and characterization of PLA_PBS biodegradable blends reinforced with cellulose nanocrystals extracted from hemp fibres

(2016) F. Luzi et al.   INDUSTRIAL CROPS AND PRODUCTS

Improvement of the mechanical behavior of bioplastic poly(lactic acid)/polyamide blends by reactive compatibilization

(2016) JeongIn Gug et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Enhancing the Melt Strength of Poly(Lactic Acid) via Micro-Crosslinking and Blending with Poly(Butylene Adipate-co-Butylene Terephthalate)for the Preparation of Foams

(2016) Rong Zhang et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Isothermal crystallization behaviors and kinetics of nucleated polylactide/poly(butylene adipate-co-terephthalate) blend films with talc

(2016) Worasak Phetwarotai et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Polylactic acid and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nano and microparticles for packaging bioplastic composites

(2016) Rebeca Bouza et al.   POLYMER BULLETIN

Microcellular foaming of polylactide and poly(butylene adipate-co-terphathalate) blends and their CaCO3reinforced nanocomposites using supercritical carbon dioxide

(2016) Xuetao Shi et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Modified whey protein coatings for improved gas barrier properties of biodegradable films

(2016) Orli Weizman et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Synergistic Effects of Nucleating Agents and Plasticizers on the Crystallization Behavior of Poly(lactic acid)

(2015) Xuetao Shi et al.   MOLECULES

Flexible and Tough Poly(lactic acid) Films for Packaging Applications: Property and Processability Improvement by Effective Reactive Blending

(2015) Wannee Chinsirikul et al.   PACKAGING TECHNOLOGY AND SCIENCE

Effect of mixing poly(lactic acid) with glycidyl methacrylate grafted poly(ethylene octene) on optical and mechanical properties of the blown films

(2015) Yan Zhao et al.   POLYMER ENGINEERING AND SCIENCE

Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends

(2015) Liliane Cardoso Arruda et al.   POLYMER TESTING

Grafting of wheat straw fibers with poly (ε-caprolactone) via ring-opening polymerization for poly(lactic acid) reinforcement

(2015) I. Kellersztein et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Reactive extrusion of PLA, PBAT with a multi-functional epoxide: Physico-chemical and rheological properties

(2014) Racha Al-Itry et al.   EUROPEAN POLYMER JOURNAL

Foam injection molding of poly(lactic acid) with environmentally friendly physical blowing agents

(2014) R. Pantani et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

(2014) Wu Li et al.   POLYMER BULLETIN

Toughening of poly (lactic acid) by poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with high β-hydroxyvalerate content

(2013) P. Ma et al.   EUROPEAN POLYMER JOURNAL

Copolymerization of lactic acid for cost-effective PLA synthesis and studies on its improved characteristics

(2013) Moumita Bishai et al.   FOOD SCIENCE AND BIOTECHNOLOGY

Effect of a chain extender on the rheological and mechanical properties of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] blends

(2013) Hassan Eslami et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Polylactic acid/polycaprolactone nanocomposite

(2013) Reza Salehiyan et al.   JOURNAL OF ELASTOMERS AND PLASTICS

MFC-structured biodegradable poly(l-lactide)/poly(butylene adipate-co-terephatalate) blends with improved mechanical and barrier properties

(2013) M. Evstatiev et al.   JOURNAL OF MATERIALS SCIENCE

Crystallization behavior of poly(lactic acid)/microfibrillated cellulose composite

(2013) Yanan Song et al.   POLYMER

A study of morphological, thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing

(2013) Idris Zembouai et al.   POLYMER TESTING

Preparation and Properties of Biodegradable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blend with Epoxy-Functional Styrene Acrylic Copolymer as Reactive Agent

(2012) Naiwen Zhang et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Biodegradable Nanocomposites of Poly(butylene adipate-co-terephthalate) (PBAT) and Organically Modified Layered Silicates

(2012) S. Mohanty et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents

(2011) P. Ma et al.   EUROPEAN POLYMER JOURNAL

Polylactide toughening with epoxy-functionalized grafted acrylonitrile-butadiene-styrene particles

(2011) Shulin Sun et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Biodegradation and hydrolysis rate of aliphatic aromatic polyester

(2010) Thitisilp Kijchavengkul et al.   POLYMER DEGRADATION AND STABILITY

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

(2009) Defeng Wu et al.   BIOMACROMOLECULES

The effects of different starch sources and plasticizers on film blowing of thermoplastic starch: Correlation among process, elongational properties and macromolecular structure

(2009) R. Zullo et al.   CARBOHYDRATE POLYMERS

Compatibility and phase structure of binary blends of poly(lactic acid) and glycidyl methacrylate grafted poly(ethylene octane)

(2009) Zhizhong Su et al.   EUROPEAN POLYMER JOURNAL

Morphological and rheological characterization of multi-walled carbon nanotube/PLA/PBAT blend nanocomposites

(2009) S. W. Ko et al.   POLYMER BULLETIN

Polymorphism and isomorphism in biodegradable polyesters

(2009) Pengju Pan et al.   PROGRESS IN POLYMER SCIENCE

Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent

(2008) Naiwen Zhang et al.   JOURNAL OF MATERIALS SCIENCE

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

(2008) V. L. Finkenstadt et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT