4.7 Article

Degradation of TCE, PCE, and 1,2-DCE DNAPLs in contaminated groundwater using polyethylenimine-modified zero-valent iron nanoparticles

Journal

JOURNAL OF CLEANER PRODUCTION
Volume 175, Issue -, Pages 456-466

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.jclepro.2017.12.074

Keywords

Zero-valent iron nanoparticles; DNAPLs; Polyethylenimine; Decontamination; GroundWater remediation

Funding

  1. Ministry of Science and Technology (MOST), Taiwan [MOST 103-2621-M-155-001]

Ask authors/readers for more resources

Remediation of dense non-aqueous phase liquid (DNAPL), which consists primarily of chlorinated solvents, is considered a top priority in the field of groundwater decontamination. Downward migration of DNAPL can lead to formation of impermeable strata due to low solubility and high density. Remediation is therefore one of the most complex technical challenges faced by environmental engineers. In the present work, remediation of trichloroethylene (TCE), perchloroethene (PCE), and 1,2-dichloroethene (1,2-DCE) DNAPL-contaminated groundwater was studied by a reductive reaction with polyethylenimine (PEI) surface-modified zero-valent iron nanoparticles (PEI-nZVI). Compared with fresh nZVI, PEI-nZVI exhibited smaller spherical particles of 20-80 nm and a greater surface area of 53.4 m(2) /g. Furthermore, slow desorption of the PEI indicated its potential application as a protective shell layer for efficient delivery of active nZVI to the water/DNAPL interface. Laboratory batch remediation results indicate that both nZVI and PEI-nZVI can remove 99% of TCE, PCE, and 1,2-DCE. The rate of reaction for fresh nZVI was higher in the early stage. Comparatively, PEI-nZVI had a higher removal rate and efficiency after 2 h. The kinetic studies also revealed that the removal rate for 1,2-DCE was greater than that for TCE and PCE. Additionally, X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy studies indicated that the nZVI and PEI-nZVI have two central Fe atoms coordinated by primarily Fe-O and Fe-Fe with bond distances of 1.87 angstrom and 3.05 angstrom, respectively. Furthermore, after the reductive reaction, nZVI and PEI-nZVI were oxidized to Fe3O4, and bond distance values for the reacted samples were 1.94 angstrom and 1.96 angstrom, respectively. (C) 2017 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available