Solution-Processed Titanium Chelate Used as Both Electrode Modification Layer and Intermediate Layer for Efficient Inverted Tandem Polymer Solar Cells

Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell

(2017) Yong Cui et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

(2017) Wenchao Zhao et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Optimization of the Energy Level Alignment between the Photoactive Layer and the Cathode Contact Utilizing Solution-Processed Hafnium Acetylacetonate as Buffer Layer for Efficient Polymer Solar Cells

(2016) Lu Yu et al.   ACS Applied Materials & Interfaces

Nonfullerene Tandem Organic Solar Cells with High Open-Circuit Voltage of 1.97 V

(2016) Wenqing Liu et al.   ADVANCED MATERIALS

Aqueous Solution Processed Photoconductive Cathode Interlayer for High Performance Polymer Solar Cells with Thick Interlayer and Thick Active Layer

(2016) Li Nian et al.   ADVANCED MATERIALS

Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells

(2016) Sunsun Li et al.   ADVANCED MATERIALS

A simple strategy to the side chain functionalization on the quinoxaline unit for efficient polymer solar cells

(2016) Jun Yuan et al.   CHEMICAL COMMUNICATIONS

Polymer Solar Cells with High Open-Circuit Voltage Based on Novel Barbell-Shaped Bifullerene Derivative as Acceptor

(2016) Ying Guo et al.   CHINESE JOURNAL OF ORGANIC CHEMISTRY

A Fluorinated Polythiophene Derivative with Stabilized Backbone Conformation for Highly Efficient Fullerene and Non-Fullerene Polymer Solar Cells

(2016) Shaoqing Zhang et al.   MACROMOLECULES

Highly conductive Zinc-Tin-Oxide buffer layer for inverted polymer solar cells

(2016) Leiming Yu et al.   ORGANIC ELECTRONICS

Enhanced electrochromic properties of donor–acceptor polymers via TiO2 composite

(2016) Yijie Tao et al.   POLYMER

Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization

(2016) Wenchao Zhao et al.   Science China-Chemistry

The optimal TiO 2 /Ag/TiO 2 electrode for organic solar cell application with high device-specific Haacke figure of merit

(2016) Zhao Zhao et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

(2016) Haijun Bin et al.   Nature Communications

Fast charge separation in a non-fullerene organic solar cell with a small driving force

(2016) Jing Liu et al.   Nature Energy

Polymer Homo-Tandem Solar Cells with Best Efficiency of 11.3%

(2015) Huiqiong Zhou et al.   ADVANCED MATERIALS

Polymer Solar Cells Based on the Copolymers of Naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) and Alkoxylphenyl Substituted Benzodithiophene with High Open-Circuit Voltages

(2015) Liqian Liu et al.   CHINESE JOURNAL OF CHEMISTRY

Photo-generated carriers lose energy during extraction from polymer-fullerene solar cells

(2015) Armantas Melianas et al.   Nature Communications

Microcavity-Enhanced Light-Trapping for Highly Efficient Organic Parallel Tandem Solar Cells

(2014) Lijian Zuo et al.   ADVANCED MATERIALS

Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range

(2014) Zhong Zheng et al.   ADVANCED MATERIALS

1,8-Diiodooctane as the Processing Additive to Improve the Efficiency of P3HT:PC61BM Solar Cells

(2014) Xing Fan et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Effect of ZnO:Cs2CO3 on the performance of organic photovoltaics

(2014) Hyeong Kim et al.   Nanoscale Research Letters

8.91% Power Conversion Efficiency for Polymer Tandem Solar Cells

(2013) Abd. Rashid bin Mohd Yusoff et al.   ADVANCED FUNCTIONAL MATERIALS

Understanding the origin of the S-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations

(2013) B. Y. Finck et al.   APPLIED PHYSICS LETTERS

High Open Circuit Voltage Solution-Processed Tandem Organic Photovoltaic Cells Employing a Bottom Cell Using a New Medium Band Gap Semiconducting Polymer

(2013) Ji-Hoon Kim et al.   CHEMISTRY OF MATERIALS

Interface investigation of the alcohol-/water-soluble conjugated polymer PFN as cathode interfacial layer in organic solar cells

(2013) Shu Zhong et al.   JOURNAL OF APPLIED PHYSICS

Development of Large Band-Gap Conjugated Copolymers for Efficient Regular Single and Tandem Organic Solar Cells

(2013) Kai Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Efficient Tandem and Triple-Junction Polymer Solar Cells

(2013) Weiwei Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Assessing the origin of the S-shaped I–V curve in organic solar cells: An improved equivalent circuit model

(2013) Lijian Zuo et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High-Performance Inverted Polymer Solar Cells with Solution-Processed Titanium Chelate as Electron-Collecting Layer on ITO Electrode

(2012) Zhan'ao Tan et al.   ADVANCED MATERIALS

Effects of Additives on the Morphology of Solution Phase Aggregates Formed by Active Layer Components of High-Efficiency Organic Solar Cells

(2011) Sylvia J. Lou et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

A Metal-Oxide Interconnection Layer for Polymer Tandem Solar Cells with an Inverted Architecture

(2010) Cheng-Hsuan Chou et al.   ADVANCED MATERIALS

Maximizing the open-circuit voltage of polymer: Fullerene solar cells

(2010) J. C. Bijleveld et al.   APPLIED PHYSICS LETTERS

Transparent electrode with ZnO nanoparticles in tandem organic solar cells

(2010) Donggu Lee et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Dipole induced anomalous S-shape I-V curves in polymer solar cells

(2009) Ankit Kumar et al.   JOURNAL OF APPLIED PHYSICS