Overview on the Prediction Models for Sheet Metal Forming Failure: Necking and Ductile Fracture
Published 2018 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Overview on the Prediction Models for Sheet Metal Forming Failure: Necking and Ductile Fracture
Authors
Keywords
Necking, Ductile fracture, Failure model, Sheet metal forming
Journal
ACTA MECHANICA SOLIDA SINICA
Volume 31, Issue 3, Pages 259-289
Publisher
Springer Nature
Online
2018-04-19
DOI
10.1007/s10338-018-0026-6
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach
- (2018) Qi Hu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A new shear and tension based ductile fracture criterion: Modeling and validation
- (2017) Qi Hu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- An improved curvature method of detecting the onset of localized necking in Marciniak tests and its extension to Nakazima tests
- (2017) Junying Min et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A comparative study of three groups of ductile fracture loci in the 3D space
- (2015) Yuanli Bai et al. ENGINEERING FRACTURE MECHANICS
- An experimental and numerical study for the damage characterization of a Ti–6AL–4V titanium alloy
- (2015) Nima Allahverdizadeh et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities
- (2015) Dirk Mohr et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Validation of metal plasticity and fracture models through numerical simulation of high velocity perforation
- (2015) Vladislav V. Vershinin INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming
- (2015) Maysam Gorji et al. International Journal of Material Forming
- Evaluation of ductile fracture criteria in a general three-dimensional stress state considering the stress triaxiality and the lode parameter
- (2014) Yanshan Lou et al. ACTA MECHANICA SOLIDA SINICA
- Investigation and comparative analysis of plastic instability criteria: application to forming limit diagrams
- (2014) Farid Abed-Meraim et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental verification of the influence of normal stress on the formability of thin-walled 5A02 aluminum alloy tubes
- (2014) Xiao-Lei Cui et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of through-thickness normal stress on forming limits under Yld2003 yield criterion and M-K model
- (2014) Feifei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Forming limit model evaluation for anisotropic sheet metals under through-thickness normal stress
- (2014) Feifei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effect of normal stress on the formability of sheet metals under non-proportional loading
- (2014) Morteza Nurcheshmeh et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On the extension of the Gurson-type porous plasticity models for prediction of ductile fracture under shear-dominated conditions
- (2014) Jun Zhou et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Measuring forming limit strains with digital image correlation analysis
- (2014) Kaifeng Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formability limits by fracture in sheet metal forming
- (2014) K. Isik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Sheet metal forming limits under stretch-bending with anisotropic hardening
- (2013) Ji He et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Temperature and strain rate influence on AA5086 Forming Limit Curves: Experimental results and discussion on the validity of the M-K model
- (2013) Xingrong Chu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading
- (2013) Amir Shojaei et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage
- (2013) Michael Brünig et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An extended GTN model for ductile fracture under high and low stress triaxiality
- (2013) L. Malcher et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality
- (2013) Yanshan Lou et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of nonlinear strain paths on forming limits under isotropic and anisotropic hardening
- (2013) Ji He et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Forming Limits of a Sheet Metal After Continuous-Bending-Under-Tension Loading
- (2013) Ji He et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels
- (2013) Sansot Panich et al. MATERIALS & DESIGN
- Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress
- (2013) Ramin Hashemi et al. MATERIALS & DESIGN
- Evaluation of uncoupled ductile fracture criteria for the dual-phase steel Docol 600DL
- (2012) G. Gruben et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of strain rate sensitivity on FLDs—An instability approach
- (2012) Ming-Yao Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A new approach for ductile fracture prediction on Al 2024-T351 alloy
- (2012) Akhtar S. Khan et al. INTERNATIONAL JOURNAL OF PLASTICITY
- The effects of anisotropic yield functions and their material parameters on prediction of forming limit diagrams
- (2012) Prasad Dasappa et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Path independent forming limits in strain and stress spaces
- (2012) Thomas B. Stoughton et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals
- (2012) Yanshan Lou et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- The strain gradient approach to predict necking in tube hydroforming
- (2012) Ramin Hashemi et al. Journal of Manufacturing Processes
- An analytical approach for the prediction of forming limit curves subjected to combined strain paths
- (2011) Rohith Uppaluri et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An extended Marciniak–Kuczynski model for anisotropic sheet subjected to monotonic strain paths with through-thickness shear
- (2011) Philip Eyckens et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality
- (2011) L. Malcher et al. INTERNATIONAL JOURNAL OF PLASTICITY
- On the predictive capabilities of the shear modified Gurson and the modified Mohr–Coulomb fracture models over a wide range of stress triaxialities and Lode angles
- (2011) Matthieu Dunand et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Influence of out-of-plane compression stress on limit strains in sheet metals
- (2011) Morteza Nurcheshmeh et al. International Journal of Material Forming
- Forming limit diagrams with the existence of through-thickness normal stress
- (2010) Ahmad Assempour et al. COMPUTATIONAL MATERIALS SCIENCE
- Partially coupled anisotropic fracture model for aluminum sheets
- (2010) Allison M. Beese et al. ENGINEERING FRACTURE MECHANICS
- Ductile shear failure or plug failure of spot welds modelled by modified Gurson model
- (2010) Kim Lau Nielsen et al. ENGINEERING FRACTURE MECHANICS
- Ductile fracture: Experiments and computations
- (2010) H. Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A New Ductile Fracture Criterion for Various Deformation Conditions Based on Microvoid Model
- (2010) Jian-ke HUANG et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Prediction of shear-induced fracture in sheet metal forming
- (2010) Yaning Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new formulation of the modified maximum force criterion (MMFC)
- (2010) Liana Paraianu et al. International Journal of Material Forming
- A modified Gurson model and its application to punch-out experiments
- (2009) Ken Nahshon et al. ENGINEERING FRACTURE MECHANICS
- Application of extended Mohr–Coulomb criterion to ductile fracture
- (2009) Yuanli Bai et al. INTERNATIONAL JOURNAL OF FRACTURE
- Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal
- (2009) Philip Eyckens et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Analysis of plastic flow localization under strain paths changes and its coupling with finite element simulation in sheet metal forming
- (2009) A. Barata da Rocha et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Forming limit diagrams of tubular materials by bulge tests
- (2009) Yeong-Maw Hwang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming
- (2008) Zhiying Chen et al. COMPUTATIONAL MATERIALS SCIENCE
- An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M–K analysis
- (2008) S. Ahmadi et al. COMPUTATIONAL MATERIALS SCIENCE
- A ductile damage criterion at various stress triaxialities
- (2008) Michael Brünig et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effects of superimposed hydrostatic pressure on sheet metal formability
- (2008) P.D. Wu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Generalised forming limit diagrams showing increased forming limits with non-planar stress states
- (2008) Julian M. Allwood et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Constitutive modeling of void shearing effect in ductile fracture of porous materials
- (2007) Liang Xue ENGINEERING FRACTURE MECHANICS
- Modification of the Gurson Model for shear failure
- (2007) K. Nahshon et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior
- (2007) K YOSHIDA et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A new model of metal plasticity and fracture with pressure and Lode dependence
- (2007) Yuanli Bai et al. INTERNATIONAL JOURNAL OF PLASTICITY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started