Electrochemical Sensors for Monitoring the Corrosion Conditions of Reinforced Concrete Structures: A Review

Potentiometric thick-film sensors for measuring the pH of concrete

(2016) J.M. Gandía-Romero et al.   CEMENT & CONCRETE COMPOSITES

Predictive convection zone depth of chloride in concrete under chloride environment

(2016) Peng Liu et al.   CEMENT & CONCRETE COMPOSITES

Development of solid state embeddable reference electrode for corrosion monitoring of steel in reinforced concrete structures

(2016) V. Maruthapandian et al.   CEMENT & CONCRETE COMPOSITES

The experimental study on the correlation of resistivity and damage for conductive concrete

(2016) Hong-yan Chu et al.   CEMENT & CONCRETE COMPOSITES

Temperature response and moisture transport in damaged concrete under an atmospheric environment

(2016) Weiping Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of carbonate and sulfate ions on chloride threshold level of reinforcement corrosion in mortar with/without fly ash

(2016) Rong Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Nondestructive test methods for concrete bridges: A review

(2016) Sardar Kashif Ur Rehman et al.   CONSTRUCTION AND BUILDING MATERIALS

Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete

(2016) Xingji Zhu et al.   CONSTRUCTION AND BUILDING MATERIALS

Methods for measuring pH in concrete: A review

(2016) Ali Behnood et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel

(2016) Karla Hornbostel et al.   CORROSION SCIENCE

Effect of carbonation on release of bound chlorides in chloride-contaminated concrete

(2016) Jian Geng et al.   MAGAZINE OF CONCRETE RESEARCH

Diagnosis of carbonation induced corrosion initiation and progression in reinforced concrete structures using piezo-impedance transducers

(2016) V. Talakokula et al.   SENSORS AND ACTUATORS A-PHYSICAL

Characterization of embeddable potentiometric thick-film sensors for monitoring chloride penetration in concrete

(2016) José M. Gandía-Romero et al.   SENSORS AND ACTUATORS B-CHEMICAL

Lifetime modelling of chloride-induced corrosion in concrete structures with Portland and blended cements

(2016) Pedro Faustino et al.   Structure and Infrastructure Engineering

Acoustic emission monitoring and damage mode discrimination of APS thermal barrier coatings under high temperature CMAS corrosion

(2016) L. Yang et al.   SURFACE & COATINGS TECHNOLOGY

Probabilistic Corrosion Initiation Time Assessment of Existing Concrete Structures Under Marine Environment

(2015) Lingjie Wu et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

A quantitative analysis of the geometric effects of reinforcement in concrete resistivity measurement above reinforcement

(2015) Young-Chul Lim et al.   CONSTRUCTION AND BUILDING MATERIALS

Reinforced concrete structure: Non destructive in situ strength assessment of concrete

(2015) Raffaele Pucinotti   CONSTRUCTION AND BUILDING MATERIALS

Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures

(2015) Dongyu Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

On the measurement of the polarisation resistance of reinforcing steel with embedded sensors: A comparative study

(2015) E. V. Pereira et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Influence of flexural fatigue on chloride threshold value for the corrosion of steels in Ca(OH)2 solutions

(2015) Linhua Jiang et al.   MATERIALS CHEMISTRY AND PHYSICS

Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique

(2015) Ahmad Zaki et al.   SENSORS

Accelerated carbonation tests for the probabilistic prediction of the durability of concrete structures

(2014) Frédéric Duprat et al.   CONSTRUCTION AND BUILDING MATERIALS

Practical model for predicting corrosion rate of steel reinforcement in concrete structures

(2014) Bo Yu et al.   CONSTRUCTION AND BUILDING MATERIALS

Analysis of chloride threshold from laboratory and field experiments in marine atmosphere zone

(2014) G.R. Meira et al.   CONSTRUCTION AND BUILDING MATERIALS

Electrochemical impedance study on steel corrosion in the simulated concrete system with a novel self-healing microcapsule

(2014) Biqin Dong et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of compression fatigue on chloride threshold value for the corrosion of steels in simulated concrete pore

(2014) Linhua Jiang et al.   CONSTRUCTION AND BUILDING MATERIALS

Corrosion in Reinforced Concrete Panels: Wireless Monitoring and Wavelet-Based Analysis

(2014) Guofu Qiao et al.   SENSORS

Monitoring Corrosion of Steel Bars in Reinforced Concrete Structures

(2014) Sanjeev Kumar Verma et al.   TheScientificWorldJOURNAL

A Simple and Reliable Setup for Monitoring Corrosion Rate of Steel Rebars in Concrete

(2014) Shamsad Ahmad et al.   TheScientificWorldJOURNAL

Relationship between concrete resistivity and corrosion rate – A literature review

(2013) Karla Hornbostel et al.   CEMENT & CONCRETE COMPOSITES

Monitoring of the degradation of concrete structures in environments containing chloride ions

(2013) Pedro Romano et al.   CONSTRUCTION AND BUILDING MATERIALS

Wireless sensor networks for temperature and humidity monitoring within concrete structures

(2013) Norberto Barroca et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of curing regime on concrete resistivity and aging factor over time

(2013) F. Presuel-Moreno et al.   CONSTRUCTION AND BUILDING MATERIALS

Probabilistic analysis of the time to chloride induced corrosion for different Self-Compacting Concretes

(2013) Paraic C. Ryan et al.   CONSTRUCTION AND BUILDING MATERIALS

Corrosion Behavior of Stainless Steel Rebars Embedded in Concrete: an Electrochemical Impedance Spectroscopy Study

(2013) R.G. Duarte et al.   ELECTROCHIMICA ACTA

Influence of Unsupported Concrete Media in Corrosion Assessment for Steel Reinforcing Concrete by Electrochemical Impedance Spectroscopy

(2013) A.S. Castela et al.   ELECTROCHIMICA ACTA

The electrochemical behaviour of steel rebars in concrete: an Electrochemical Impedance Spectroscopy study of the effect of temperature

(2013) J.M. Deus et al.   ELECTROCHIMICA ACTA

Probabilistic models applied to safety assessment of reinforced concrete structures subjected to chloride ingress

(2013) Caio Gorla Nogueira et al.   ENGINEERING FAILURE ANALYSIS

A probabilistic threshold for the onset of carbonation-induced corrosion

(2013) Frédéric Duprat et al.   European Journal of Environmental and Civil Engineering

Electrochemical Performance Evaluation of Corrosion Monitoring Sensor for Reinforced Concrete Structures

(2013) Jin-A Jeong et al.   Journal of Advanced Concrete Technology

Condition survey with embedded sensors regarding reinforcement corrosion

(2013) M. Raupach et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

A simple analytical design approach based on computer aided analysis of bulk micromachined piezoresistive MEMS accelerometer for concrete SHM applications

(2013) S. Kavitha et al.   MEASUREMENT

Optical fibre-based sensor technology for humidity and moisture measurement: Review of recent progress

(2013) L. Alwis et al.   MEASUREMENT

A New Corrosion Sensor to Determine the Start and Development of Embedded Rebar Corrosion Process at Coastal Concrete

(2013) Chen Xu et al.   SENSORS

Long-term relative performance of embedded sensor and surface mounted electrode for corrosion monitoring of steel in concrete structures

(2013) S.P. Karthick et al.   SENSORS AND ACTUATORS B-CHEMICAL

Fluorescence based fibre optic pH sensor for the pH 10–13 range suitable for corrosion monitoring in concrete structures

(2013) T. Hien Nguyen et al.   SENSORS AND ACTUATORS B-CHEMICAL

A wireless embedded passive sensor for monitoring the corrosion potential of reinforcing steel

(2013) Sharmistha Bhadra et al.   Smart Materials and Structures

Methodology for Assessing the Probability of Corrosion in Concrete Structures on the Basis of Half-Cell Potential and Concrete Resistivity Measurements

(2013) Lukasz Sadowski   TheScientificWorldJOURNAL

Probabilistic modeling of chloride-induced corrosion in concrete structures using first- and second-order reliability methods

(2012) Bassem Saassouh et al.   CEMENT & CONCRETE COMPOSITES

Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site

(2012) T. Cheewaket et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions

(2012) Linhua Jiang et al.   CONSTRUCTION AND BUILDING MATERIALS

On-site transient analysis for the corrosion assessment of reinforced concrete

(2012) C. Christodoulou et al.   CORROSION SCIENCE

Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate

(2012) Chong Cao et al.   CORROSION SCIENCE

Influence of humidity and temperature on the corrosion of reinforced concrete prisms

(2012) Véronique Bouteiller et al.   European Journal of Environmental and Civil Engineering

EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions

(2012) Chen-Qing Ye et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Numerically and Experimentally Based Reliability Assessment of a Concrete Bridge Subjected to Chloride-Induced Deterioration

(2012) Alfred Strauss et al.   Journal of Infrastructure Systems

Characterization of the reinforcing steel corrosion by potentialdynamic scan approach

(2012) Guofu Qiao et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Reliability of Electrochemical Techniques to Predict the Corrosion Rate of Steel in Concrete Structures

(2011) R. Vedalakshmi et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Durability Monitoring for Improved Service Life Predictions of Concrete Bridge Decks in Corrosive Environments

(2011) D. Cusson et al.   COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING

Corrosion behavior of steel in simulated concrete pore solutions treated with calcium silicate hydrates

(2011) Y.M. Tang et al.   CONSTRUCTION AND BUILDING MATERIALS

Chloride induced reinforcement corrosion: Electrochemical monitoring of initiation stage and chloride threshold values

(2011) Ueli M. Angst et al.   CORROSION SCIENCE

The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides

(2011) L. Freire et al.   ELECTROCHIMICA ACTA

An embedded multi-parameter corrosion sensor for reinforced concrete structures

(2011) H. Yu et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Remote corrosion monitoring of the RC structures using the electrochemical wireless energy-harvesting sensors and networks

(2011) Guofu Qiao et al.   NDT & E INTERNATIONAL

Non-Destructive Techniques Based on Eddy Current Testing

(2011) Javier García-Martín et al.   SENSORS

Potentiostatic transient technique, a simple approach to estimate the corrosion current density and Stern–Geary constant of reinforcing steel in concrete

(2010) A. Poursaee   CEMENT AND CONCRETE RESEARCH

Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete

(2010) Jinxia Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Effective monitoring of corrosion in reinforcing steel in concrete constructions by a multifunctional sensor

(2010) Shi-Gang Dong et al.   ELECTROCHIMICA ACTA

A comprehensive probabilistic model of chloride ingress in unsaturated concrete

(2010) E. Bastidas-Arteaga et al.   ENGINEERING STRUCTURES

Polarization resistance measurements of bars embedded in concrete with different chloride concentrations: EIS and DC comparison

(2010) I. Martínez et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing

(2010) Junqi Gao et al.   NDT & E INTERNATIONAL

Examples of reinforcement corrosion monitoring by embedded sensors in concrete structures

(2009) I. Martínez et al.   CEMENT & CONCRETE COMPOSITES

Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures

(2009) Gustavo S. Duffó et al.   CONSTRUCTION AND BUILDING MATERIALS

Electrochemical frequency modulation and inductively coupled plasma atomic emission spectroscopy methods for monitoring corrosion rates and inhibition of low alloy steel corrosion in HCl solutions and a test for validity of the Tafel extrapolation method

(2009) Mohammed A. Amin et al.   CORROSION SCIENCE

Non-substrate EIS monitoring of organic coatings with embedded electrodes

(2009) Kerry Allahar et al.   PROGRESS IN ORGANIC COATINGS

Corrosion cracking prediction updating of deteriorating RC structures using inspection information

(2009) Qinghui Suo et al.   RELIABILITY ENGINEERING & SYSTEM SAFETY

A Galvanic Sensor for Monitoring the Corrosion Condition of the Concrete Reinforcing Steel: Relationship Between the Galvanic and the Corrosion Currents

(2009) Elsa Pereira et al.   SENSORS

Optical fibre sensors for the measurement of concrete sample properties following exposure to freeze/thaw tests

(2009) T.L. Yeo et al.   SENSORS AND ACTUATORS A-PHYSICAL

Electrical property of cement-based composites filled with carbon black under long-term wet and loading condition

(2008) H LI et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Influence of environmental parameters on application of standard ASTM C876-91: half cell potential measurements

(2008) B. Assouli et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Galvanostatic pulse technique with the current confinement guard ring: The laboratory and finite element analysis

(2008) A. Poursaee et al.   CORROSION SCIENCE

Evaluation of embeddable potential sensor for corrosion monitoring in concrete structures

(2008) S. Muralidharan et al.   ELECTROCHIMICA ACTA

Characterization of solid embeddable reference electrodes for corrosion monitoring in reinforced concrete structures

(2008) G.S. Duffó et al.   ELECTROCHIMICA ACTA

Optical Sensors for Corrosion Systems: I. Oxygen Sensing

(2008) Francis Guillaume et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Development of a wireless stress/strain measurement system integrated with pressure-sensitive nickel powder-filled cement-based sensors

(2008) B.G. Han et al.   SENSORS AND ACTUATORS A-PHYSICAL

Fibre Bragg gratings in structural health monitoring—Present status and applications

(2008) Mousumi Majumder et al.   SENSORS AND ACTUATORS A-PHYSICAL

Steel corrosion and service life of reinforced concrete structures

(2008) Luca Bertolini   Structure and Infrastructure Engineering

Chloride threshold for rebar corrosion in concrete with addition of silica fume

(2007) Marco Manera et al.   CORROSION SCIENCE

Probabilistic evaluation of initiation time of chloride-induced corrosion

(2007) Dimitri V. Val et al.   RELIABILITY ENGINEERING & SYSTEM SAFETY

Electrochemical studies on the performance characteristics of alkaline solid embeddable sensor for concrete environments

(2007) S. Muralidharan et al.   SENSORS AND ACTUATORS B-CHEMICAL

Temperature and moisture monitoring in concrete structures using embedded nanotechnology/microelectromechanical systems (MEMS) sensors

(2006) Ashley Norris et al.   CONSTRUCTION AND BUILDING MATERIALS