Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique

Advanced structural health monitoring of concrete structures with the aid of acoustic emission

(2014) Arash Behnia et al.   CONSTRUCTION AND BUILDING MATERIALS

Acoustic emission monitoring for assessment of prestressed concrete beams

(2014) Mohamed K. ElBatanouny et al.   CONSTRUCTION AND BUILDING MATERIALS

Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element

(2014) Shilpa Patil et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental monitoring of chloride-induced reinforcement corrosion and chloride contamination in concrete with ground-penetrating radar

(2014) Shuxian Hong et al.   Structure and Infrastructure Engineering

Corrosion Monitoring and Evaluation of Reinforced Concrete Structures Utilizing the Ultrasonic Guided Wave Technique

(2014) Dongsheng Li et al.   International Journal of Distributed Sensor Networks

Corrosion mechanisms in reinforced concrete by acoustic emission

(2013) Yuma Kawasaki et al.   CONSTRUCTION AND BUILDING MATERIALS

Identification of corrosion mechanisms by univariate and multivariate statistical analysis during long term acoustic emission monitoring on a pre-stressed concrete beam

(2013) L. Calabrese et al.   CORROSION SCIENCE

Infrared thermography for condition monitoring – A review

(2013) S. Bagavathiappan et al.   INFRARED PHYSICS & TECHNOLOGY

Early Corrosion Detection in Prestressed Concrete Girders Using Acoustic Emission

(2013) Mohamed K. ElBatanouny et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Full surface inspection methods regarding reinforcement corrosion of concrete structures

(2013) K. Reichling et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Local detailed inspection methods regarding reinforcement corrosion of concrete structures

(2013) K. Reichling et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Review of Physical Based Monitoring Techniques for Condition Assessment of Corrosion in Reinforced Concrete

(2013) Ying Lei et al.   MATHEMATICAL PROBLEMS IN ENGINEERING

Nondestructive Evaluation of Corrosion in Varying Environments Using Guided Waves

(2013) Shruti Sharma et al.   RESEARCH IN NONDESTRUCTIVE EVALUATION

Methodology for Assessing the Probability of Corrosion in Concrete Structures on the Basis of Half-Cell Potential and Concrete Resistivity Measurements

(2013) Lukasz Sadowski   TheScientificWorldJOURNAL

New non-destructive method for linear polarisation resistance corrosion rate measurement

(2012) Ł. SADOWSKI   Archives of Civil and Mechanical Engineering

Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete

(2012) L. Calabrese et al.   CONSTRUCTION AND BUILDING MATERIALS

Damage assessment of corrosion in prestressed concrete by acoustic emission

(2012) Hisham A. Elfergani et al.   CONSTRUCTION AND BUILDING MATERIALS

Identification of Cracking Mechanisms in Scaled FRP Reinforced Concrete Beams using Acoustic Emission

(2012) M. K. ElBatanouny et al.   EXPERIMENTAL MECHANICS

Nondestructive Corrosion Detection in RC Through Integrated Heat Induction and IR Thermography

(2012) Seunghoon Baek et al.   JOURNAL OF NONDESTRUCTIVE EVALUATION

Optical-Based Sensors for Monitoring Corrosion of Reinforcement Rebar via an Etched Cladding Bragg Grating

(2012) Muhammad Hassan et al.   SENSORS

Reliability of Electrochemical Techniques to Predict the Corrosion Rate of Steel in Concrete Structures

(2011) R. Vedalakshmi et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Analysis of acoustic emission signals generated from SCC propagation

(2011) M.G. Alvarez et al.   CORROSION SCIENCE

Monitoring Corrosion in Oxide and Chloride Environments Using Ultrasonic Guided Waves

(2011) Shruti Sharma et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Frequency-dependent dispersion of high-frequency ground penetrating radar wave in concrete

(2011) W.L. Lai et al.   NDT & E INTERNATIONAL

Modification of the wavelength-strain coefficient of FBG for the prediction of steel bar corrosion embedded in concrete

(2011) Wen Chen et al.   OPTICAL FIBER TECHNOLOGY

AE monitoring of corrosion process in cyclic wet–dry test

(2010) Yuma Kawasaki et al.   CONSTRUCTION AND BUILDING MATERIALS

Crack classification in concrete based on acoustic emission

(2010) Kentaro Ohno et al.   CONSTRUCTION AND BUILDING MATERIALS

Combined use of thermography and ultrasound for the characterization of subsurface cracks in concrete

(2010) D.G. Aggelis et al.   CONSTRUCTION AND BUILDING MATERIALS

Reliability of Galvanostatic Pulse Technique in assessing the corrosion rate of rebar in concrete structures: Laboratory vs field studies

(2010) R. Vedalakshmi et al.   KSCE Journal of Civil Engineering

Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*

(2010)   MATERIALS AND STRUCTURES

Acoustic emission activities and damage evaluation of reinforced concrete beams strengthened with CFRP sheets

(2010) Hyun-Do Yun et al.   NDT & E INTERNATIONAL

Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing

(2010) Junqi Gao et al.   NDT & E INTERNATIONAL

Damage analysis of reinforced concrete buildings by the acoustic emission technique

(2010) A. Carpinteri et al.   Structural Control & Health Monitoring

Longitudinal Guided Waves for Monitoring Chloride Corrosion in Reinforcing Bars in Concrete

(2010) Shruti Sharma et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Thermographic Imaging of Subsurface Deterioration in Concrete Bridges

(2010) Glenn Washer et al.   TRANSPORTATION RESEARCH RECORD

Characterization of concrete properties from dielectric properties using ground penetrating radar

(2009) W.L. Lai et al.   CEMENT AND CONCRETE RESEARCH

A structural corrosion-monitoring sensor based on a pair of prestrained fiber Bragg gratings

(2009) Jung-Ryul Lee et al.   MEASUREMENT SCIENCE and TECHNOLOGY

Influence of environmental parameters on application of standard ASTM C876-91: half cell potential measurements

(2008) B. Assouli et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Galvanostatic pulse technique with the current confinement guard ring: The laboratory and finite element analysis

(2008) A. Poursaee et al.   CORROSION SCIENCE

Monitoring Corrosion of Rebar Embedded in Mortar Using High-Frequency Guided Ultrasonic Waves

(2008) Benjamin L. Ervin et al.   JOURNAL OF ENGINEERING MECHANICS

Improved concrete bridge deck evaluation using GPR by accounting for signal depth–amplitude effects

(2008) Christopher L. Barnes et al.   NDT & E INTERNATIONAL