The Emerging Frontiers and Applications of High-Resolution 3D Printing

Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution

(2016) Patrizia Richner et al.   ACS Applied Materials & Interfaces

Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

(2016) Rouhollah D. Farahani et al.   ADVANCED MATERIALS

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

(2016) Kun Fu et al.   ADVANCED MATERIALS

3D bioprinting for engineering complex tissues

(2016) Christian Mandrycky et al.   BIOTECHNOLOGY ADVANCES

3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques

(2016) Bin Zhang et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

The upcoming 3D-printing revolution in microfluidics

(2016) Nirveek Bhattacharjee et al.   LAB ON A CHIP

One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology

(2016) Hyungseok Lee et al.   LAB ON A CHIP

Microscale electrohydrodynamic printing of biomimetic PCL/nHA composite scaffolds for bone tissue engineering

(2016) Xiaoli Qu et al.   MATERIALS LETTERS

Micro/nanoscale electrohydrodynamic printing: from 2D to 3D

(2016) Bing Zhang et al.   Nanoscale

Fabrication of light, flexible and multifunctional graphene nanoribbon fibers via a 3D solution printing method

(2016) Mingqiang Wang et al.   NANOTECHNOLOGY

An integrated design and fabrication strategy for entirely soft, autonomous robots

(2016) Michael Wehner et al.   NATURE

Multiscale metallic metamaterials

(2016) Xiaoyu Zheng et al.   NATURE MATERIALS

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

(2016) Johan U. Lind et al.   NATURE MATERIALS

Two-photon direct laser writing of ultracompact multi-lens objectives

(2016) Timo Gissibl et al.   Nature Photonics

Laser-assisted direct ink writing of planar and 3D metal architectures

(2016) Mark A. Skylar-Scott et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Three-dimensional bioprinting of thick vascularized tissues

(2016) David B. Kolesky et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Fabrication of highly conductive graphene flexible circuits by 3D printing

(2016) Di Zhang et al.   SYNTHETIC METALS

Towards Single-Step Biofabrication of Organs on a Chip via 3D Printing

(2016) Stephanie Knowlton et al.   TRENDS IN BIOTECHNOLOGY

3D-Printed Cathodes of LiMn1−xFexPO4Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium-Ion Battery

(2016) Jiangtao Hu et al.   Advanced Energy Materials

Guided Homing of Cells in Multi-Photon Microfabricated Bioscaffolds

(2016) Mark A. Skylar-Scott et al.   Advanced Healthcare Materials

Toward Direct Laser Writing of Actively Tuneable 3D Photonic Crystals

(2016) Yaoyang Hu et al.   Advanced Optical Materials

Fabrication of bespoke nasal septal scaffolds

(2016) S.H. Hashimdeen et al.   MATERIALS & DESIGN

Mechanical assembly of complex, 3D mesostructures from releasable multilayers of advanced materials

(2016) Z. Yan et al.   Science Advances

Highly-stretchable 3D-architected Mechanical Metamaterials

(2016) Yanhui Jiang et al.   Scientific Reports

Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures

(2015) Guoxi Luo et al.   ACS Applied Materials & Interfaces

Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes

(2015) Julian Schneider et al.   ADVANCED FUNCTIONAL MATERIALS

High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks

(2015) Byeong Wan An et al.   ADVANCED MATERIALS

Fabrication of Transparent Multilayer Circuits by Inkjet Printing

(2015) Jieke Jiang et al.   ADVANCED MATERIALS

Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing

(2015) Andreas Frutiger et al.   ADVANCED MATERIALS

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks

(2015) James O. Hardin et al.   ADVANCED MATERIALS

Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery

(2015) Jin-Feng Xing et al.   CHEMICAL SOCIETY REVIEWS

Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors

(2015) Gengzhi Sun et al.   ELECTROCHEMISTRY COMMUNICATIONS

Enhancing structural integrity of hydrogels by using highly organised melt electrospun fibre constructs

(2015) Onur Bas et al.   EUROPEAN POLYMER JOURNAL

High-resolution electrohydrodynamic jet printing for the direct fabrication of 3D multilayer terahertz metamaterial of high refractive index

(2015) Hadi Teguh Yudistira et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

3D-printed microfluidic automation

(2015) Anthony K. Au et al.   LAB ON A CHIP

Design and fabrication of biomimetic multiphased scaffolds for ligament-to-bone fixation

(2015) Jiankang He et al.   Materials Science & Engineering C-Materials for Biological Applications

Brittle intermetallic compound makes ultrastrong low-density steel with large ductility

(2015) Sang-Heon Kim et al.   NATURE

Resilient 3D hierarchical architected metamaterials

(2015) Lucas R. Meza et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Active mixing of complex fluids at the microscale

(2015) Thomas J. Ober et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Continuous liquid interface production of 3D objects

(2015) J. R. Tumbleston et al.   SCIENCE

Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing

(2015) M. Serdar Onses et al.   Small

Structural optimization of 3D-printed synthetic spider webs for high strength

(2015) Zhao Qin et al.   Nature Communications

Highly compressible 3D periodic graphene aerogel microlattices

(2015) Cheng Zhu et al.   Nature Communications

Reinforcement of hydrogels using three-dimensionally printed microfibres

(2015) Jetze Visser et al.   Nature Communications

High-Resolution Projection Microstereolithography for Patterning of Neovasculature

(2015) Ritu Raman et al.   Advanced Healthcare Materials

Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers

(2014) Joseph T. Muth et al.   ADVANCED MATERIALS

3D Printing of Reduced Graphene Oxide Nanowires

(2014) Jung Hyun Kim et al.   ADVANCED MATERIALS

3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs

(2014) David B. Kolesky et al.   ADVANCED MATERIALS

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

(2014) Bethany C. Gross et al.   ANALYTICAL CHEMISTRY

Generation of Multi-scale Vascular Network System Within 3D Hydrogel Using 3D Bio-printing Technology

(2014) Vivian K. Lee et al.   Cellular and Molecular Bioengineering

3D Printing multifunctionality: structures with electronics

(2014) David Espalin et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Toward Nanoscale Three-Dimensional Printing: Nanowalls Built of Electrospun Nanofibers

(2014) Minhee Lee et al.   LANGMUIR

3D Printed Quantum Dot Light-Emitting Diodes

(2014) Yong Lin Kong et al.   NANO LETTERS

Microfluidic organs-on-chips

(2014) Sangeeta N Bhatia et al.   NATURE BIOTECHNOLOGY

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing

(2014) Gernot Hochleitner et al.   POLYMER

Strong, lightweight, and recoverable three-dimensional ceramic nanolattices

(2014) L. R. Meza et al.   SCIENCE

Ultralight, ultrastiff mechanical metamaterials

(2014) X. Zheng et al.   SCIENCE

3D Printing for the Rapid Prototyping of Structural Electronics

(2014) Eric Macdonald et al.   IEEE Access

Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix

(2013) Jan Torgersen et al.   ADVANCED FUNCTIONAL MATERIALS

3D Printing of Free Standing Liquid Metal Microstructures

(2013) Collin Ladd et al.   ADVANCED MATERIALS

3D Printing of Interdigitated Li-Ion Microbattery Architectures

(2013) Ke Sun et al.   ADVANCED MATERIALS

A 3D Printed Fluidic Device that Enables Integrated Features

(2013) Kari B. Anderson et al.   ANALYTICAL CHEMISTRY

Fabrication of three-dimensional porous scaffolds with controlled filament orientation and large pore size via an improved E-jetting technique

(2013) Jin Lan Li et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting

(2013) Chuang Wei et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Fabrication and deformation of three-dimensional hollow ceramic nanostructures

(2013) Dongchan Jang et al.   NATURE MATERIALS

In situ atomic-scale observation of continuous and reversible lattice deformation beyond the elastic limit

(2013) Lihua Wang et al.   Nature Communications

High-Throughput Printing via Microvascular Multinozzle Arrays

(2012) Christopher J. Hansen et al.   ADVANCED MATERIALS

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

(2012) Simon J. Leigh et al.   PLoS One

Flexible Electronics: The Next Ubiquitous Platform

(2012) A. Nathan et al.   PROCEEDINGS OF THE IEEE

Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system

(2012) Xiaoyu Zheng et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Direct Writing By Way of Melt Electrospinning

(2011) Toby D. Brown et al.   ADVANCED MATERIALS

Metamaterials: a new frontier of science and technology

(2011) Yongmin Liu et al.   CHEMICAL SOCIETY REVIEWS

Ensembles of engineered cardiac tissues for physiological and pharmacological study: Heart on a chip

(2011) Anna Grosberg et al.   LAB ON A CHIP

Spatially controlled simultaneous patterning of multiple growth factors in three-dimensional hydrogels

(2011) Ryan G. Wylie et al.   NATURE MATERIALS

Ultralight Metallic Microlattices

(2011) T. A. Schaedler et al.   SCIENCE

Direct-write assembly of microperiodic planar and spanning ITO microelectrodes

(2010) Bok Yeop Ahn et al.   CHEMICAL COMMUNICATIONS

Mechanical regulation of cell function with geometrically modulated elastomeric substrates

(2010) Jianping Fu et al.   NATURE METHODS

Self-Assembled Plasmonic Nanoparticle Clusters

(2010) J. A. Fan et al.   SCIENCE

A super ink jet printed zinc–silver 3D microbattery

(2009) C C Ho et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Plasmonic analogue of electromagnetically induced transparency at the Drude damping limit

(2009) Na Liu et al.   NATURE MATERIALS

Two-photon fabrication

(2009) Maria Farsari et al.   Nature Photonics

Achieving  /20 Resolution by One-Color Initiation and Deactivation of Polymerization

(2009) L. Li et al.   SCIENCE

Oriented Assembly of Metamaterials

(2009) K. J. Stebe et al.   SCIENCE

Three-dimensional optical metamaterial with a negative refractive index

(2008) Jason Valentine et al.   NATURE