标题
The Emerging Frontiers and Applications of High-Resolution 3D Printing
作者
关键词
-
出版物
Micromachines
Volume 8, Issue 4, Pages 113
出版商
MDPI AG
发表日期
2017-04-04
DOI
10.3390/mi8040113
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution
- (2016) Patrizia Richner et al. ACS Applied Materials & Interfaces
- Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
- (2016) Rouhollah D. Farahani et al. ADVANCED MATERIALS
- Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
- (2016) Kun Fu et al. ADVANCED MATERIALS
- 3D bioprinting for engineering complex tissues
- (2016) Christian Mandrycky et al. BIOTECHNOLOGY ADVANCES
- 3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques
- (2016) Bin Zhang et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- The upcoming 3D-printing revolution in microfluidics
- (2016) Nirveek Bhattacharjee et al. LAB ON A CHIP
- One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology
- (2016) Hyungseok Lee et al. LAB ON A CHIP
- Microscale electrohydrodynamic printing of biomimetic PCL/nHA composite scaffolds for bone tissue engineering
- (2016) Xiaoli Qu et al. MATERIALS LETTERS
- Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
- (2016) Bing Zhang et al. Nanoscale
- Fabrication of light, flexible and multifunctional graphene nanoribbon fibers via a 3D solution printing method
- (2016) Mingqiang Wang et al. NANOTECHNOLOGY
- An integrated design and fabrication strategy for entirely soft, autonomous robots
- (2016) Michael Wehner et al. NATURE
- Multiscale metallic metamaterials
- (2016) Xiaoyu Zheng et al. NATURE MATERIALS
- Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
- (2016) Johan U. Lind et al. NATURE MATERIALS
- Two-photon direct laser writing of ultracompact multi-lens objectives
- (2016) Timo Gissibl et al. Nature Photonics
- Laser-assisted direct ink writing of planar and 3D metal architectures
- (2016) Mark A. Skylar-Scott et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Three-dimensional bioprinting of thick vascularized tissues
- (2016) David B. Kolesky et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Fabrication of highly conductive graphene flexible circuits by 3D printing
- (2016) Di Zhang et al. SYNTHETIC METALS
- Towards Single-Step Biofabrication of Organs on a Chip via 3D Printing
- (2016) Stephanie Knowlton et al. TRENDS IN BIOTECHNOLOGY
- 3D-Printed Cathodes of LiMn1−xFexPO4Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium-Ion Battery
- (2016) Jiangtao Hu et al. Advanced Energy Materials
- Guided Homing of Cells in Multi-Photon Microfabricated Bioscaffolds
- (2016) Mark A. Skylar-Scott et al. Advanced Healthcare Materials
- Toward Direct Laser Writing of Actively Tuneable 3D Photonic Crystals
- (2016) Yaoyang Hu et al. Advanced Optical Materials
- Fabrication of bespoke nasal septal scaffolds
- (2016) S.H. Hashimdeen et al. MATERIALS & DESIGN
- Mechanical assembly of complex, 3D mesostructures from releasable multilayers of advanced materials
- (2016) Z. Yan et al. Science Advances
- Highly-stretchable 3D-architected Mechanical Metamaterials
- (2016) Yanhui Jiang et al. Scientific Reports
- Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures
- (2015) Guoxi Luo et al. ACS Applied Materials & Interfaces
- Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes
- (2015) Julian Schneider et al. ADVANCED FUNCTIONAL MATERIALS
- High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks
- (2015) Byeong Wan An et al. ADVANCED MATERIALS
- Fabrication of Transparent Multilayer Circuits by Inkjet Printing
- (2015) Jieke Jiang et al. ADVANCED MATERIALS
- Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing
- (2015) Andreas Frutiger et al. ADVANCED MATERIALS
- Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
- (2015) James O. Hardin et al. ADVANCED MATERIALS
- Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
- (2015) Jin-Feng Xing et al. CHEMICAL SOCIETY REVIEWS
- Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors
- (2015) Gengzhi Sun et al. ELECTROCHEMISTRY COMMUNICATIONS
- Enhancing structural integrity of hydrogels by using highly organised melt electrospun fibre constructs
- (2015) Onur Bas et al. EUROPEAN POLYMER JOURNAL
- High-resolution electrohydrodynamic jet printing for the direct fabrication of 3D multilayer terahertz metamaterial of high refractive index
- (2015) Hadi Teguh Yudistira et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- 3D-printed microfluidic automation
- (2015) Anthony K. Au et al. LAB ON A CHIP
- Design and fabrication of biomimetic multiphased scaffolds for ligament-to-bone fixation
- (2015) Jiankang He et al. Materials Science & Engineering C-Materials for Biological Applications
- Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
- (2015) Sang-Heon Kim et al. NATURE
- Resilient 3D hierarchical architected metamaterials
- (2015) Lucas R. Meza et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Active mixing of complex fluids at the microscale
- (2015) Thomas J. Ober et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
- (2015) M. Serdar Onses et al. Small
- Structural optimization of 3D-printed synthetic spider webs for high strength
- (2015) Zhao Qin et al. Nature Communications
- Highly compressible 3D periodic graphene aerogel microlattices
- (2015) Cheng Zhu et al. Nature Communications
- Reinforcement of hydrogels using three-dimensionally printed microfibres
- (2015) Jetze Visser et al. Nature Communications
- High-Resolution Projection Microstereolithography for Patterning of Neovasculature
- (2015) Ritu Raman et al. Advanced Healthcare Materials
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- 3D Printing of Reduced Graphene Oxide Nanowires
- (2014) Jung Hyun Kim et al. ADVANCED MATERIALS
- 3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
- (2014) David B. Kolesky et al. ADVANCED MATERIALS
- Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
- (2014) Bethany C. Gross et al. ANALYTICAL CHEMISTRY
- Generation of Multi-scale Vascular Network System Within 3D Hydrogel Using 3D Bio-printing Technology
- (2014) Vivian K. Lee et al. Cellular and Molecular Bioengineering
- 3D Printing multifunctionality: structures with electronics
- (2014) David Espalin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Toward Nanoscale Three-Dimensional Printing: Nanowalls Built of Electrospun Nanofibers
- (2014) Minhee Lee et al. LANGMUIR
- 3D Printed Quantum Dot Light-Emitting Diodes
- (2014) Yong Lin Kong et al. NANO LETTERS
- Microfluidic organs-on-chips
- (2014) Sangeeta N Bhatia et al. NATURE BIOTECHNOLOGY
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing
- (2014) Gernot Hochleitner et al. POLYMER
- Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
- (2014) L. R. Meza et al. SCIENCE
- Ultralight, ultrastiff mechanical metamaterials
- (2014) X. Zheng et al. SCIENCE
- 3D Printing for the Rapid Prototyping of Structural Electronics
- (2014) Eric Macdonald et al. IEEE Access
- Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
- (2013) Jan Torgersen et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Printing of Free Standing Liquid Metal Microstructures
- (2013) Collin Ladd et al. ADVANCED MATERIALS
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- A 3D Printed Fluidic Device that Enables Integrated Features
- (2013) Kari B. Anderson et al. ANALYTICAL CHEMISTRY
- Fabrication of three-dimensional porous scaffolds with controlled filament orientation and large pore size via an improved E-jetting technique
- (2013) Jin Lan Li et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting
- (2013) Chuang Wei et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Fabrication and deformation of three-dimensional hollow ceramic nanostructures
- (2013) Dongchan Jang et al. NATURE MATERIALS
- In situ atomic-scale observation of continuous and reversible lattice deformation beyond the elastic limit
- (2013) Lihua Wang et al. Nature Communications
- High-Throughput Printing via Microvascular Multinozzle Arrays
- (2012) Christopher J. Hansen et al. ADVANCED MATERIALS
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
- (2012) Simon J. Leigh et al. PLoS One
- Flexible Electronics: The Next Ubiquitous Platform
- (2012) A. Nathan et al. PROCEEDINGS OF THE IEEE
- Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
- (2012) Xiaoyu Zheng et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Direct Writing By Way of Melt Electrospinning
- (2011) Toby D. Brown et al. ADVANCED MATERIALS
- Metamaterials: a new frontier of science and technology
- (2011) Yongmin Liu et al. CHEMICAL SOCIETY REVIEWS
- Ensembles of engineered cardiac tissues for physiological and pharmacological study: Heart on a chip
- (2011) Anna Grosberg et al. LAB ON A CHIP
- Spatially controlled simultaneous patterning of multiple growth factors in three-dimensional hydrogels
- (2011) Ryan G. Wylie et al. NATURE MATERIALS
- Ultralight Metallic Microlattices
- (2011) T. A. Schaedler et al. SCIENCE
- Direct-write assembly of microperiodic planar and spanning ITO microelectrodes
- (2010) Bok Yeop Ahn et al. CHEMICAL COMMUNICATIONS
- Mechanical regulation of cell function with geometrically modulated elastomeric substrates
- (2010) Jianping Fu et al. NATURE METHODS
- Self-Assembled Plasmonic Nanoparticle Clusters
- (2010) J. A. Fan et al. SCIENCE
- A super ink jet printed zinc–silver 3D microbattery
- (2009) C C Ho et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Plasmonic analogue of electromagnetically induced transparency at the Drude damping limit
- (2009) Na Liu et al. NATURE MATERIALS
- Two-photon fabrication
- (2009) Maria Farsari et al. Nature Photonics
- Achieving /20 Resolution by One-Color Initiation and Deactivation of Polymerization
- (2009) L. Li et al. SCIENCE
- Oriented Assembly of Metamaterials
- (2009) K. J. Stebe et al. SCIENCE
- Three-dimensional optical metamaterial with a negative refractive index
- (2008) Jason Valentine et al. NATURE
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now