Enhancing the Photovoltaic Performance via Vertical Phase Distribution Optimization in Small Molecule:PC71 BM Blends

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

(2017) Wenchao Zhao et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Multi-Length-Scale Morphologies Driven by Mixed Additives in Porphyrin-Based Organic Photovoltaics

(2016) Ke Gao et al.   ADVANCED MATERIALS

Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency

(2016) Haijun Bin et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Solution-processed organic tandem solar cells with power conversion efficiencies >12%

(2016) Miaomiao Li et al.   Nature Photonics

Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells

(2016) Dan Deng et al.   Nature Communications

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

(2016) Haijun Bin et al.   Nature Communications

Optimized “Alloy-Parallel” Morphology of Ternary Organic Solar Cells

(2016) Zaiyu Wang et al.   Advanced Energy Materials

Drift-Diffusion Studies of Compositional Morphology in Bulk Heterojunctions: The Role of the Mixed Phase in Photovoltaic Performance

(2016) Benjamin Y. Finck et al.   Physical Review Applied

Dual-Characteristic Transistors Based on Semiconducting Polymer Blends

(2016) Guanghao Lu et al.   Advanced Electronic Materials

Film-Depth-Dependent Light Absorption and Charge Transport for Polymer Electronics: A Case Study on Semiconductor/Insulator Blends by Plasma Etching

(2016) Laju Bu et al.   Advanced Electronic Materials

Efficient organic solar cells processed from hydrocarbon solvents

(2016) Jingbo Zhao et al.   Nature Energy

Highly Efficient Organic Solar Cells with Improved Vertical Donor-Acceptor Compositional Gradient Via an Inverted Off-Center Spinning Method

(2015) Jiang Huang et al.   ADVANCED MATERIALS

Efficient inverted polymer solar cells employing favourable molecular orientation

(2015) Varun Vohra et al.   Nature Photonics

Disorder-Induced Open-Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn-In

(2015) Thomas Heumueller et al.   Advanced Energy Materials

Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High-Efficiency Solution-Processed Small-Molecule BHJ Solar Cells

(2015) Subhrangsu Mukherjee et al.   Advanced Energy Materials

Understanding the Impact of Hierarchical Nanostructure in Ternary Organic Solar Cells

(2015) Jin Fang et al.   Advanced Science

Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT-C-T/PC71BM

(2014) Xia Guo et al.   ADVANCED MATERIALS

Importance of Domain Purity and Molecular Packing in Efficient Solution-Processed Small-Molecule Solar Cells

(2014) Subhrangsu Mukherjee et al.   ADVANCED MATERIALS

Synergistic Effect of Polymer and Small Molecules for High-Performance Ternary Organic Solar Cells

(2014) Yajie Zhang et al.   ADVANCED MATERIALS

Top-Down Approach for Nanophase Reconstruction in Bulk Heterojunction Solar Cells

(2014) Jaemin Kong et al.   ADVANCED MATERIALS

Improving the Morphology of PCDTBT:PC70BM Bulk Heterojunction by Mixed-Solvent Vapor-Assisted Imprinting: Inhibiting Intercalation, Optimizing Vertical Phase Separation, and Enhancing Photon Absorption

(2014) Jiangang Liu et al.   Journal of Physical Chemistry C

Solution-Processed Organic Solar Cells Based on Dialkylthiol-Substituted Benzodithiophene Unit with Efficiency near 10%

(2014) Bin Kan et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Mobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers

(2014) Wentao Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Optimization of molecular organization and nanoscale morphology for high performance low bandgap polymer solar cells

(2014) Ming He et al.   Nanoscale

Small-molecule solar cells with efficiency over 9%

(2014) Qian Zhang et al.   Nature Photonics

Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells

(2014) Yuhang Liu et al.   Nature Communications

Vertical phase separation in bulk heterojunction solar cells formed by in situ polymerization of fulleride

(2014) Lipei Zhang et al.   Scientific Reports

Film Morphology of High Efficiency Solution-Processed Small-Molecule Solar Cells

(2013) John A. Love et al.   ADVANCED FUNCTIONAL MATERIALS

High-Efficiency Hybrid Solar Cells Based on Polymer/PbSxSe1-xNanocrystals Benefiting from Vertical Phase Segregation

(2013) Zeke Liu et al.   ADVANCED MATERIALS

Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells

(2013) Long Ye et al.   Journal of Physical Chemistry C

Electrical Performance of Organic Solar Cells with Additive-Assisted Vertical Phase Separation in the Photoactive Layer

(2013) Min Kim et al.   Advanced Energy Materials

Understanding the Role of Thermal Processing in High Performance Solution Processed Small Molecule Bulk Heterojunction Solar Cells

(2012) Wei Lin Leong et al.   Advanced Energy Materials

Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells

(2012) Brian A. Collins et al.   Advanced Energy Materials

Solvent-Induced Morphology in Polymer-Based Systems for Organic Photovoltaics

(2011) Matthias A. Ruderer et al.   ADVANCED FUNCTIONAL MATERIALS

Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives

(2011) Ming-Shin Su et al.   ADVANCED MATERIALS

Roles of thermally-induced vertical phase segregation and crystallization on the photovoltaic performance of bulk heterojunction inverted polymer solar cells

(2011) Hyeunseok Cheun et al.   Energy & Environmental Science

All-conjugated poly(3-alkylthiophene) diblock copolymer-based bulk heterojunction solar cells with controlled molecular organization and nanoscale morphology

(2011) Ming He et al.   Energy & Environmental Science

Annealing effects on the photovoltaic performance of all-conjugated poly(3-alkylthiophene) diblock copolymer-based bulk heterojunction solar cells

(2011) Ming He et al.   Nanoscale

Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells

(2011) James C. Blakesley et al.   PHYSICAL REVIEW B

Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells

(2009) Zheng Xu et al.   ADVANCED FUNCTIONAL MATERIALS

Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells

(2009) Li-Min Chen et al.   ADVANCED MATERIALS

Fast-Grown Interpenetrating Network in Poly(3-hexylthiophene): Methanofullerenes Solar Cells Processed with Additive

(2009) Hsiang-Yu Chen et al.   Journal of Physical Chemistry C

Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends

(2008) Mariano Campoy-Quiles et al.   NATURE MATERIALS