Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT-C-T/PC71BM

High-Efficiency Polymer Solar Cells Enhanced by Solvent Treatment

(2013) Huiqiong Zhou et al.   ADVANCED MATERIALS

A Series of New Medium-Bandgap Conjugated Polymers Based on Naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) for High-Performance Polymer Solar Cells

(2013) Yang Dong et al.   ADVANCED MATERIALS

Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers

(2013) Maojie Zhang et al.   ADVANCED MATERIALS

Efficient Polymer Solar Cells Based on Benzothiadiazole and Alkylphenyl Substituted Benzodithiophene with a Power Conversion Efficiency over 8%

(2013) Maojie Zhang et al.   ADVANCED MATERIALS

Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance

(2013) Sih-Hao Liao et al.   ADVANCED MATERIALS

Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells

(2013) Long Ye et al.   Journal of Physical Chemistry C

Fluorine Substituents Reduce Charge Recombination and Drive Structure and Morphology Development in Polymer Solar Cells

(2013) Andrew C. Stuart et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer

(2013) Shengjian Liu et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

A polymer tandem solar cell with 10.6% power conversion efficiency

(2013) Jingbi You et al.   Nature Communications

Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement

(2013) Wei Ma et al.   Advanced Energy Materials

Competition between morphological attributes in the thermal annealing and additive processing of polymer solar cells

(2013) Wei Ma et al.   Journal of Materials Chemistry C

Improved Performance of Molecular Bulk-Heterojunction Photovoltaic Cells through Predictable Selection of Solvent Additives

(2012) Kenneth R. Graham et al.   ADVANCED FUNCTIONAL MATERIALS

Efficient Polymer Solar Cells Based on a Low Bandgap Semi-crystalline DPP Polymer-PCBM Blends

(2012) Feng Liu et al.   ADVANCED MATERIALS

High-Performance Inverted Polymer Solar Cells with Solution-Processed Titanium Chelate as Electron-Collecting Layer on ITO Electrode

(2012) Zhan'ao Tan et al.   ADVANCED MATERIALS

Post-Deposition Treatment of an Arylated-Carbazole Conjugated Polymer for Solar Cell Fabrication

(2012) Xiaofeng Liu et al.   ADVANCED MATERIALS

From Binary to Ternary Solvent: Morphology Fine-tuning of D/A Blends in PDPP3T-based Polymer Solar Cells

(2012) Long Ye et al.   ADVANCED MATERIALS

Influence of D/A Ratio on Photovoltaic Performance of a Highly Efficient Polymer Solar Cell System

(2012) Xia Guo et al.   ADVANCED MATERIALS

High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive

(2012) Xia Guo et al.   Energy & Environmental Science

Enhancing the Photocurrent in Diketopyrrolopyrrole-Based Polymer Solar Cells via Energy Level Control

(2012) Weiwei Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Poly(thieno[3,2-b]thiophene-alt-bithiazole): A D–A Copolymer Donor Showing Improved Photovoltaic Performance with Indene-C60 Bisadduct Acceptor

(2012) Xia Guo et al.   MACROMOLECULES

Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer

(2012) Letian Dou et al.   Nature Photonics

Vertical phase separation of conjugated polymer and fullerene bulk heterojunction films induced by high pressure carbon dioxide treatment at ambient temperature

(2012) Ryo Kokubu et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis

(2012) E. Gann et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

The Importance of Fullerene Percolation in the Mixed Regions of Polymer-Fullerene Bulk Heterojunction Solar Cells

(2012) Jonathan A. Bartelt et al.   Advanced Energy Materials

Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells

(2012) Brian A. Collins et al.   Advanced Energy Materials

Correlating the Efficiency and Nanomorphology of Polymer Blend Solar Cells Utilizing Resonant Soft X-ray Scattering

(2011) Hongping Yan et al.   ACS Nano

Effect of Trace Solvent on the Morphology of P3HT:PCBM Bulk Heterojunction Solar Cells

(2011) Lilian Chang et al.   ADVANCED FUNCTIONAL MATERIALS

Solvent Additive Control of Morphology and Crystallization in Semiconducting Polymer Blends

(2011) Xueliang Liu et al.   ADVANCED MATERIALS

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

(2011) Zhicai He et al.   ADVANCED MATERIALS

Improving Device Efficiency of Polymer/Fullerene Bulk Heterojunction Solar Cells Through Enhanced Crystallinity and Reduced Grain Boundaries Induced by Solvent Additives

(2011) Ming-Shin Su et al.   ADVANCED MATERIALS

Structural Order in Bulk Heterojunction Films Prepared with Solvent Additives

(2011) James T. Rogers et al.   ADVANCED MATERIALS

Combination of Titanium Oxide and a Conjugated Polyelectrolyte for High-Performance Inverted-Type Organic Optoelectronic Devices

(2011) Hyosung Choi et al.   ADVANCED MATERIALS

Replacing Alkoxy Groups with Alkylthienyl Groups: A Feasible Approach To Improve the Properties of Photovoltaic Polymers

(2011) Lijun Huo et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Highly Efficient Electron Injection from Indium Tin Oxide/Cross-Linkable Amino-Functionalized Polyfluorene Interface in Inverted Organic Light Emitting Devices

(2011) Chengmei Zhong et al.   CHEMISTRY OF MATERIALS

Synthesis and Photovoltaic Properties of D–A Copolymers Based on Alkyl-Substituted Indacenodithiophene Donor Unit

(2011) Maojie Zhang et al.   CHEMISTRY OF MATERIALS

Solvent-soaking treatment induced morphology evolution in P3HT/PCBM composite films

(2011) Hui Li et al.   JOURNAL OF MATERIALS CHEMISTRY

Effects of Additives on the Morphology of Solution Phase Aggregates Formed by Active Layer Components of High-Efficiency Organic Solar Cells

(2011) Sylvia J. Lou et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Improved High-Efficiency Organic Solar Cells via Incorporation of a Conjugated Polyelectrolyte Interlayer

(2011) Jung Hwa Seo et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Hierarchical Nanomorphologies Promote Exciton Dissociation in Polymer/Fullerene Bulk Heterojunction Solar Cells

(2011) Wei Chen et al.   NANO LETTERS

Effect of mixed solvents on PCDTBT:PC70BM based solar cells

(2011) Salima Alem et al.   ORGANIC ELECTRONICS

A Systematic Approach to Solvent Selection Based on Cohesive Energy Densities in a Molecular Bulk Heterojunction System

(2011) Bright Walker et al.   Advanced Energy Materials

Synthesis and Characterization of a Copolymer Based on Thiazolothiazole and Dithienosilole for Polymer Solar Cells

(2011) Maojie Zhang et al.   Advanced Energy Materials

Improved Performance of Polymer Bulk Heterojunction Solar Cells Through the Reduction of Phase Separation via Solvent Additives

(2010) Corey V. Hoven et al.   ADVANCED MATERIALS

Highly Efficient and Stable Inverted Polymer Solar Cells Integrated with a Cross-Linked Fullerene Material as an Interlayer

(2010) Chao-Hsiang Hsieh et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices

(2009) Junwu Chen et al.   ACCOUNTS OF CHEMICAL RESEARCH

Alternating Polyfluorenes Collect Solar Light in Polymer Photovoltaics

(2009) Olle InganÄs et al.   ACCOUNTS OF CHEMICAL RESEARCH

“Plastic” Solar Cells: Self-Assembly of Bulk Heterojunction Nanomaterials by Spontaneous Phase Separation

(2009) Jeffrey Peet et al.   ACCOUNTS OF CHEMICAL RESEARCH

Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells

(2009) Zheng Xu et al.   ADVANCED FUNCTIONAL MATERIALS

Substrate-dependent interface composition and charge transport in films for organic photovoltaics

(2009) David S. Germack et al.   APPLIED PHYSICS LETTERS

Effect of Annealing Solvent Solubility on the Performance of Poly(3-hexylthiophene)/Methanofullerene Solar Cells

(2009) Jong Hwan Park et al.   Journal of Physical Chemistry C

Advanced Polymer Design and Synthesis

(2008) Klaus Müllen et al.   ACCOUNTS OF CHEMICAL RESEARCH

Efficient Polythiophene/Polyfluorene Copolymer Bulk Heterojunction Photovoltaic Devices: Device Physics and Annealing Effects

(2008) Christopher R. McNeill et al.   ADVANCED FUNCTIONAL MATERIALS

Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells

(2008) Yan Yao et al.   ADVANCED FUNCTIONAL MATERIALS

Narrow‐Bandgap Diketo‐Pyrrolo‐Pyrrole Polymer Solar Cells: The Effect of Processing on the Performance

(2008) Martijn M. Wienk et al.   ADVANCED MATERIALS

Interfacial modification to improve inverted polymer solar cells

(2008) Steven K. Hau et al.   JOURNAL OF MATERIALS CHEMISTRY

Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells

(2008) Jae Kwan Lee et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Low-Temperature Control of Nanoscale Morphology for High Performance Polymer Photovoltaics

(2008) Andrew R. Campbell et al.   NANO LETTERS

Polymer–Fullerene Composite Solar Cells

(2007) Barry C. Thompson et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION